Construction Of Toilet Block at Kali Bari, Pungh in Sundernagar

Amount

Centering and shuttering including strutting, propping etc. and removal of form for all heights:

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement-All works above plinth level upto floor V level 1:1.5:3(1 cement : 1.5 coarse sand ) : 3 graded stone aggregate 20mm nominal size)

Providing mild steel / Tor steel reinforcement R.C.C. Work including bending, binding and placing in position complete upto floor two level Tor Steel Mild steel and Medium Tensile steel bars

Brick work with common burnt clay F.P.S (non modular ) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1.6 (1 cement :6 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement : 4 coarse sand)

Providing and laying vitrified floor tiles in different sizes ( thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement : 4 coarsesand ), jointing with grey cement slurry @3.3 Kg/ sqmincluding grouting the joints with white cement and matching pigments etc., Size of tiles 600x600 mm

Providing and laying Vitrified tiles in different sizes ( thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting , riser of steps, over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @3.3 Kg/ sqm including grouting the joint with white cement & matching pigments etc. complete Size of Tile 600 x 600

Providing wood work in frames of doors, windows , clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Sal wood

Providing and fixing ISI marked flush door shutters conforming to IS : 2022 (Part 1) decorative type, core of block board construction with frame of 2nd class deodar wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35mm thick including ISI marked stainless Steel butt hinges with necessary screws

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class teak wood 35mm thick

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16mm

Providing and fixing aluminium tower bolts, ISI marked,

Providing and fixing aluminium handels, ISI marked, andoised ( anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc complete:

15mm cement plaster on rough side of single of half brick wall of mix: 1:4 (1 cement : 4 coarse sand)

6mm Cement plaster to ceiling in Cement mortar 1:3 (1 Cement:3 Sand)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.

75mm nominal inner dia Pipes

100mm nominal inner dia Pipes

Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats ) over and including water thinnable priming coat with cement primer

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture

Providing and fixing G.I pipes complete with G.I. fittings and clamps, i/c cutting and ,making good the walls etc. Internal work - Exposed on wall

15mm dia nominal bore

20mm dia nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenchi, refilling & testing of joints complete as per direction of Engineer in Charge.

75mm nominal inner dia Pipes

100mm nominal inner dia Pipes

Providing and placing on terrace ( at all floor levels) polythylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet pipes but without fittings and the base support for tank

Providing and fixing white vitreous china pedestal type water closet ( European type W.C. pan) with seat and lid, 10 litre low white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handel lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plasticseat and lid

Providing and fixing wash basin with C.I. brackets, 15 C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls whenever require (a) White Viteous China Wash basin size 550X400 mm with a 15 mm CP Brass

Providing and fixing vitreous China pedestal for wash basin complete recessed at the back for the reception of pipe and fittings

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32mm dia

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality ) complete with 6mm thick hard ground fixed to wooden cleats with C.P. brass screws and washers complete

Providing and fixing C.P. Brass Towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws 600mmx20mmm

Providing and fixing 600x120x5mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40mm long screws, rawl plugs etc, complete.

Providing and fixing 15mm dia C.P. bibcock (long body) with capstan head & Flanges to IS standards and weighing not less than 690 gms including carriage of materials within all leads and lifts.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931

Providing and fixing 8mm dia C.P./ S.S. Jet with flexible tube upto 1 meter long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer-in-charge.

Providing and fixing P.V.C. connection pipe with brass union including carriage of materials within all leads and lifts:- 450mm length :- 15mm nominal bore.

Providing and fixing PTMT grating of approved quality and colour 100 mm nominal dia

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms

DEEPAK KUMAR

Govt. Contactor

RAJAT