PM ABHIM

Construction of Village Health Clinic

Earth work excavation and depositing the soil on banks with an initial lead of 10m and initial lift of 2m in loamy and clay soils like BC soils, red earth and ordinary gravel SS 20B including shoring ,strutting,sheeting ,planking and dewatering cost of hire charges of T&P labour charges etc. complete for fineshed iem of work for fondation of building

Filling with Stone dust in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and Cost and Conveyance of water to site and all operational, incidental, labour charges, Seigoirage charges, sales and other taxes etc, hire charges of T & P etc., complete for finished item of work.

Plain Cement Concrete (1:4:8) proportion Nominal mix for foundations using 40mm size SS-5 metal including cost and conveyance of all materials and curing charges, labour charges, machine mixing and laying concrete in foundations ramming etc complete for Bed Concrete

Plain Cement Concrete (1:5:10) proportion Nominal mix for foundations using 40mm size SS-5 metal including cost and conveyance of all materials and curing charges, labour charges, machine mixing and laying concrete in foundations ramming etc complete for Bed Concrete

Brick Masonry in superstructure with CM (1:6) prop: using 2nd class traditional Bricks of size 23x11x7 cms having minimum crushing strength of 50 kg/cm2 including Cost and Conveyance of all materials, scaffolding charges, etc complete for finished item of work. (APSS No. 501 & 504). for Superstructure for Ground floor

Brick Masonry in superstructure with CM (1:8) prop: using 2nd class traditional Bricks of size 23x11x7 cms having minimum crushing strength of 50 kg/cm2 including Cost and Conveyance of all materials, scaffolding charges, etc complete for finished item of work. -For superstructure

Reinforced 11.5 cm wide Brick masonry for super-structure on ground floor in cm (1:3) using second class traditional size bricks including cost of all materials, seigniorage charges, labour and all operations for constructing half brick masonry, mixing cement mortar, curing etc., complete for finished item of work, but excluding conveyance charges of materials.

VRCC M- 30 grade design mix 20mm size HBG (SS-5) metal from approved quarry using minium 370 kg of cemnet of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication & seigniorage charges. for column footings

VRCC M- 30 grade design mix 20mm size HBG (SS-5) metal from approved quarry using minium 370 kg of cemnet of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication & seigniorage charges for column pedestals

VRCC M- 30 grade design mix 20mm size HBG (SS-5) metal from approved quarry using minium 370 kg of cemnet of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication & seigniorage charges for plinth beam

VRCC M- 30 grade design mix 20mm size HBG (SS-5) metal from approved quarry using minium 370 kg of cemnet of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication & seigniorage charges columns above plinth beam upto roof

VRCC M- 30 grade design mix 20mm size HBG (SS-5) metal from approved quarry using minium 370 kg of cemnet of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication & seigniorage charges Lintels

VRCC M- 30 grade design mix 20mm size HBG (SS-5) metal from approved quarry using minium 370 kg of cemnet of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication & seigniorage charges for roof beam

VRCC M- 30 grade design mix 20mm size HBG (SS-5) metal from approved quarry using minium 370 kg of cemnet of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication & seigniorage charges for Slab 125mm thick

VRCC M- 30 grade design mix 20mm size HBG (SS-5) metal from approved quarry using minium 370 kg of cemnet of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication & seigniorage charges for Inclined Slab of 100mm thick

PCC(1:3:6) using 20mm size HBG (SS-5) metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication & seigniorage charges etc complete for Bed Blocks

VRCC M- 30 grade design mix 20mm size HBG (SS-5) metal from approved quarry using minium 350 kg of cemnet of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication & seigniorage charges for 60cm wide sun-shades of 75mm thick at fixed end and 50mm thick at free end with an average thickness of 62.5mm, and Lofts. (As per BLD-CSTN)

Flooring with vitrified tiles of Ist quality set over bse coat of CM(1:8) 12mm thick over CC bed already laid or RCC roof slab including neat cement slurry of honey like consistency spread at 3.30Kg per sqm & Jointed neatly with white cement paste to full depth mixed with mixed with full depth of pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete for finished item of work.

Providing skirting to internal walls to 15 cm height/risers of steps with soluble salt porcelain vitrified tiles length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like Cuddapah stone, cement, sand and water for finished item of work.

Ornamental plastering to Ceiling 12mm thick in CM (1:3) with dubara sponge finish ,mixing mortar, finishing, scaffolding, lift charges, including cutting of Grooves wherever necessary as directed by Engineer-in-charge, curing, etc., complete for finished item of work. -GROUND FLOOR

Plastering with CM 2 coats, 20 mm thick, base coat in CM (1:6), 16 mm thick and top coat in CM (1:3), 4mm thick with Dubara sponze finishing for external walls. GROUND FLOOR

Plastering with CM 2 coats, 12 mm thick, base coat in CM (1:6), 8mm thick and top coat in CM (1:3), 4mm thick with sponze finishing for internal walls. GROUND FLOOR

Flooring with ceramic tiles, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including etc., complete for finished item of work, but excluding the cost of conveyance of all materials.

Dadooing to walls with coloured glazed tiles 1st. quality of any size of brand as approved by Engineer - in - charge and set over a base coat of CM (1:5), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, fine sand (screened), water, tiles, etc. to site, seigniorage charges, sales and other taxes on all materials, C921 such as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished item of work (APSS No.701 & 707)

Supply & application of one coat water based cement primer of exterior grade 2 and two coats of acrylic emulsion paint having VOC content less than 50grams/ litre for internal walls including cost and conveyance of all material to site sales & other taxes, incidental operational and all labour charges etc, complete.

Supply & application of one coat water based cement primer of interior grade I and two coats of acrylic emulsion paint having VOC content less than 50grams/ litre for internal walls including cost and conveyance of all material to site sales & other taxes, incidental operational and all labour charges etc, complete.

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work

Providing and fixing of double shutter door of size 1.20 x 2.10 m made with frame of Sal wood of size 75mm x 100mm with 6 Nos. of hold fasts (3 on each side) and painted with liquid bitumen on wall side and with flush shutter of hard wood solid bond wood block board type of 35mm thick commercial ply on both sides confirming to IS 2202 including 3 Nos Aluminium butt Hinges (150mm), 1 No. Aluminium Tower bolt (250mm) at top, 1 No. Aluminium Aldrop (250mm long), 1 No Aluminium Handle (100 mm long), 1 No Al. heavy duty door stopper and 1 No. rubber bush on wall face of door including cost and conveyance of all materials, all taxes, labour charges for making, fixing of fixtures and door frame and shutter in position and all incidental charges etc., complete for finished item of work.

Providing and fixing of single shutter door of size 1.00 x 2.10 m made with frame of Sal wood of size 75mm x 100mm with 6 Nos. of hold fasts (3 on each side) and painted with liquid bitumen on wall side and with flush shutter of hard wood solid bond wood block board type of 35mm thick commercial ply on both sides confirming to IS 2202 including 3 Nos Aluminium butt Hinges (150mm), 1 No. Aluminium Tower bolt (250mm) at top, 1 No. Aluminium Aldrop (250mm long), 1 No Aluminium Handle (100 mm long), 1 No Al. heavy duty door stopper and 1 No. rubber bush on wall face of door including cost and conveyance of all materials, all taxes, labour charges for making, fixing of fixtures and door frame and shutter in position and all incidental charges etc., complete for finished item of work.

Providing and fixing of single shutter door of size 0.90 x 2.10 m made with frame of Sal wood of size 75mm x 100mm with 6 Nos. of hold fasts (3 on each side) and painted with liquid bitumen on wall side and with flush shutter of hard wood solid bond wood block board type of 35mm thick commercial ply on both sides confirming to IS 2202 including 3 Nos Aluminium butt Hinges (150mm), 1 No. Aluminium Tower bolt (250mm) at top, 1 No. Aluminium Aldrop (250mm long), 1 No Aluminium Handle (100 mm long), 1 No Al. heavy duty door stopper and 1 No. rubber bush on wall face of door including cost and conveyance of all materials, all taxes, labour charges for making, fixing of fixtures and door frame and shutter in position and all incidental charges etc., complete for finished item of work.

Providing and fixing of single shutter door of size 0.80 x 2.10 m made with frame of Sal wood of size 75mm x 100mm with 6 Nos. of hold fasts (3 on each side) and painted with liquid bitumen on wall side and with flush shutter of hard wood solid bond wood block board type of 35mm thick commercial ply on both sides confirming to IS 2202 including 3 Nos Aluminium butt Hinges (150mm), 1 No. Aluminium Tower bolt (250mm) at top, 1 No. Aluminium Aldrop (250mm long), 1 No Aluminium Handle (100 mm long), 1 No Al. heavy duty door stopper and 1 No. rubber bush on wall face of door including cost and conveyance of all materials, all taxes, labour charges for making, fixing of fixtures and door frame and shutter in position and all incidental charges etc., complete for finished item of work.

Providing and fixing of 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door with frame made of WPC including all charges etc complete for toilets

Providing and fixing factory-made uPVC any colour sliding glazed windowupto 1.50 m in height dimensioncomprising of uPVC multi- chamberedframe with in- built roller trackand sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket/TPV, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent .Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm)

Supplying and fixing of Fixed Louvered Ventilators made of pre - painted steel (base steel as per IS 513 of -0.58 mm thick 'D" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, The section for louvered ventilators should be of of 33 x 56 mm Box section paneled with 4 mm pinhead glass with Ethyl propylene Diamine monomer Gasket (EPDM) and the sections cut to length mitre joined with corner bracket . corner brackets made of CRCA with Zinc Phosphate. The frames to be fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6" pitch complete for finished item of work.

Painting to New wood work with two coats of ready mixed first quality synthetic enamel paint of approved brand and shade over primary coat of wood primer grade I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors (APSS No. 1201 &1208).

Stainless Steel Tubes, sections, plates, sheets & pipes of all sizes & diameters for - 304 Grade for hand railing

Supplying & fixing of Iron Doors and Windows Grills including labour charges for fabricating steel including cost of welding rods, power charges & fixing the grill in position etc complete

Roofing with Pressed Clay Flooring Tiles, set over a base coat of CM(1:8) 12mm thick over RCC roof slab including neat cement slurry of honey like consistency spread at 3.30Kg per sqm & Jointed neatly with cement mixed with pigment of matching shade to full depth including cost of all materials like cement, sand water and tiles etc., complete for finished item of work.

RCM facia 5cm thick in CM (1:3) for drop walls, fins with rabbit wire mesh & nominal reinforcement as directed by Engineer-in-charge with dubara sponge finishing, including cost & conveyance of all materials to site, seigniorage charges, sales & other taxes on all materials, operational & incidental, cost and conveyance of cement, wire mesh, water to work site, centering, scaffolding and form work, lift charges etc., complete for finished items of work but excluding cost of steel & its fabrication charges, for finished item of work. (APSS No.403 & 903)

Supplying, fitting and placing HYSD bar reinforcement (Fe 500 / Fe 500 D, in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded

CIVIL WORK TOTAL

Electrical Items

Supply and Fixing of 20mm dia 1.5mm thick surface P.V.C. pipe (ISI MARK) Concealed in slab with all accessories fixing on chromium plated metallic base saddles and decolam board for switches for Light, Fan and separate plug point including all labour charges etc., complete

Supply and Fixing of 25mm dia 1.5mm thick surface P.V.C. pipe (ISI MARK)Concealed in wall with all accessories fixing on chromium plated metallic base saddles including all labour charges etc., complete for run of mains.

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings

Supply and run of 1 of 14 /0.3mm (1.0 Sq.mm) FR P.V.C. insulated flexible copper cable in existing pipe for earth continuity including all labour charges etc., complete.

Supply and run of 2 of 56/0.3mm (4 Sq.mm) FR P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete.

Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete.

Supply and fixing of 16A 3pin / 6A 3pin plug socket with indicator lamp and 16Amps fuse unit and 16 Amps switch control (5 in one) on decolam sheet covered board including earth connection and all labour charges etc., complete on wall.

Supply and erecting Stepped type electronic Regulator for ceiling fans 900/1200/1400mm sweep complete erected on existing board.

Supply of 1200 mm (48")Sweep 230 V,A.C 50Hz. Celling fan with 3 blades and double ball barings with all standard accessories.

Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connections with twin core wire etc., complete.

Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded alluminium housing and polycarbonate cover, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<15%, with inbuilt river and frosted cover CCT: 3000K - 5700K, minimum RI>70, .etc., complete. Makes : As per list of recommended brands as category I.

Supply and fixing of batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with 7.0W bulb (for new installation).

Supply of IS make fresh air exhaust fan of light duty 250V A.C. 50Hz 300mm size (12") 1350 RPM Metallic body plastic blades, wire mesh, etc., complete

Labour charges for fixing of Exhaust fan in all with necessary connections and masonry work of making hole, finishing etc., complete

Supply and fixing of 3-Phase Meter Board with 18" x30" size Peta Board with 3 No. of 32A, 415 V Fuse Unit and 32A Standard make including giving internal connections

Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters.

Supply and Fixing of 45W street light luminaire to the wall with 1.0 Mtr., 25mm dia GI pipe bracket and anti tilting MS flat etc., including giving connections and labour charges etc., complete.

Supplying and run of 2 of 2.5 Sqmm 36/0.3mmFR PVC insulated flexible copper cable in Existing pipe for mains inlcuding all labour charges

Supply and fixing TPN Distribution board with IP-20 protection suitable for 3 phase ELCB / RCCB / FP Isolator as incomer and 10kA SP MCBs as outing going including internal connection and labour charges for surface / flush mounting etc., complete.

ELECTRICAL WORK TOTAL

Water Supply and Sanitary

Supply & fixing European water closet of I st quality confirming to IS:2556-part-2-1973 of Hindusthan /Neycer or Parryware make white Glazed with P Trap complete.for finished item of work.

Supply & fixing low down porcelin flushing tank 10 lit capacity Hindustan sanitary ware/Neycer with internal Components Complete for finished item of work.

supply & fixing indian make flat back wash hand basin (HSW/parry ware/Neycer) 1 st quality confirming to IS:2556-part-4-1972 with waste fittings like rubber plug ,chain,32mm nominal size CP fittings with parallel pipe thread conforming to IS:2963-1979 and fitted with 15mm nominal bore Chromium plated pillar tap of 1 st quality Indian make 400 grams seiko/senior/nice or Equivalent complete with standard CI brakets including wooden block:550x400 mm -Single CP Pillar Cock complete for finished item of work.

Supply & fixing of tested NP bib taps at all levels of 12.70mm dia of Indian make first quality including cost & conveyance of all materials, labour charges for finished item of work complete for all floors

Supplying and fixing 4" (101.6 mm ) multi floor trap with Jali- UPVC/SWR Pipe fittings of standard make of ISI Brand ncluding fixing in CM1:3 prop. and cost and conveyance of all materials at site complete for finished item of work.

Providing & fixing UPVC SWR pipes TYPE-B conforming to IS 13592:1992 including necessary specials,jointing with adhesives ,fixing vertical pipes over wooden battens including cost and conveyance of all materials at site complete for finished item of 90mm dia

Providing & fixing UPVC SWR pipes TYPE-B conforming to IS 13592:1992 including necessary specials,jointing with adhesives ,fixing vertical pipes over wooden battens including cost and conveyance of all materials at site complete for finished item of 110mm dai

Supply & fixing SWG 150x100mm gully trap of 1st class as per IS standards with CI grating and constructing brick masonry chamber of size 50x35x30cm in CM 1:6 prop. Over CC 1:5:10 prop. Bed of size 50x5x10cm and plastering 12mm thick in CM 1:4 prop. To both inside & outside surfaces of the brick chamber and fitted with 30x22.5cm CI frame and hinged cover.

Constructing inspection chamber with brick masonry in cement mortar (1:6) (1cement : 6sand) over 150mm thick foundation concrete M20 Grade Design mix. using (MSA) 20mm and duly down graded HBG metal with minimum cement content of 290 kg/cum (portland slag cement conforming to IS:455 1989) inside & outside plastering 12mm thick with cement mortar (1:4) (1cement : 4sand) inside & top finished with a floating coat of neat cement and cement concrete M20 Grade Design mix.Using (MSA) 20 mm HBG metal with minimum cement content of 240 kg/cum (portland pozzalana cement conforming to IS:1489 Part -I ) and neatly finished with cement slurry for benching, and providing and fixing man hole frame including eartgh work excavation in all kinds of soils, refilling the sides etc. complete including seigniorage, cost & conveyance charges of all material, all taxes, all labour charges, mixing laying and curing etc. complete as per standard design, in the following sizes and man hole covers.(SSR No.55)

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) 28.60mm OD Pipe -SDR 13.5

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) 22.20mm OD Pipe-SDR 13.5

Providing & fixing GM gate /ball valve as per IS standards including cost & conveyance of all material to work spot, all taxes and all labour charges including fixing in position for finished item of work.

Supplying & Fixing 31.75 mm C.P bottle trap (Heavy type) Parryware or equivalent including cost and conveyance of all materials, all taxes and labour charges for all operations etc., complete for finished item fowork..

Supply and Fixing 31.75mm dia PVC flexible waste pipe of 914.4mm length of 1st quality including cost and conveyance of all materials, all taxes and lanour charges for all operations etc., complete for finished item fowork (SSR No.315)

Providing and placing on terrace polyethylene Water Storage tank with double layer approved brand and manufature with cover and suitable locking arrangements and making necessary holes for Inlet and Outlets and over flow pipes but without fitting and base support for Tanks

W & S WORK TOTAL

74 No.of items (Seventy Four) only