WBPWD/EE/N24/EL/e-NIQ221/24-25

Amount

SUB HEAD 1-- DISTRIBUTION WIRING Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed +B8:B28pper wire (Finolex/Pollycab/ RR Kable) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [only PVC Rigid Conduit on ceiling and remaining portion concealed] -- Average Run -- 8 Mtr. [ 4(c)/E-25 ]

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Finolex/Pollycab/ RR Kable) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish On Board [ 3(i)/E- 20]

SUB-HEAD 2-- PLUGS & SOCKETS Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works 6 Module [ 1(b)/E-17 ] [ 2 Nos. 6A S.P.B. ]

Supply & Fixing 240V, 6A, 5pin Modular type plug socket (Anchor/Legrand/Schneider), without switch & plug top,on existing GI Modular type switch board with top cover plate and making necy. Connections with PVC Cu wire and earth continuity wire etc. [4(a)/E-17] [ 2 Nos. 6A S.P.B. ]

Supply & Fixing 240V, 6A Modular type switch (Anchor/Legrand/Schneider) on existing GI Modular type switch board having top cover plate and making necessary connections as required. [3(a)/E-17] [ 2 Nos. 6A S.P.B. ]

Supplying & Fixing GI Modular Switch Board of the following sizes complete with top cover plate flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works. 2 Module

Supply & Fixing 240 V 16 A Modular key type switch (Brand approved by EIC) on GI Modular type switch board having top cover plate and making necessary connections as required [ 3(b)/E-17 ] [ Geyser Pt. ]

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [ 4(b)/E-17 ] [ Geyser Pt. ]

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Make - MK Honeywell/Legrand Myrius/Crabtree) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate as per GS. -- [ 9(b)/E-18 ] [ 16A D.P.P. ]

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick as per GS. [ 26/E-7 ] [ ComB ]

Supplying & Fixing Industrial Plug & Socket board with 240 V, 20A, SPN & Earth Metal Industrial Plug socket & 20A Industrial top incl. S&F 20 A SP MCB breaking capcity 10kA (C- Curve) in SS enclosure fixed on wall and cecessary conection. [ 17/D-12 ]

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall as per GS. -- [ 5(a)/E-17 ] [ For AC Pt. ]

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate as per GS. -- [ 17/E-19 ] [ For AC Pt. ]

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connections. [ 5(b)/E-17 ] [ For AC & Inverter Pt. ]

SUB-HEAD 3 -- BDB,PDB,VTPN ETC Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. 100 A TPN SFU on angle iron frame ( Make - Havells/L & T ) [ 4(a )/D-3 ]

Supplying and fixing Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc. 100 A TPN Changeover switch ( Make - Havells ) [ 2(b)/D-1 ]

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall as per GS. (2+6) Way Enclosure (607711) [ Make - Legrand/ ABB/Schneider ] [ 13/D-9 ]

(2+10) Way Enclosure (607712) [ Make - Legrand/ABB/ Schneider ] [ 13/D-9 ]

(2+14) Way Enclosure (607713) [ Make - Legrand/ABB/Schneider ] [ 13/D-9 ]

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages as per GS. 4 Way Enclosure ( 607715 ) [ Make - Legrand/ABB/Schneider ] [ 14/D-10 ]

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damagesas per GS. Upto 160A, 4 Way Enclosure ( 607913 ) [ Make - Legrand/ABB/Schneider ] [ 15/D-11 ]

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs as per GS. -- 6-32 A SP MCB [ Make - Legrand/ABB/Schneider ] [ 7/D-6 ]

63 A TP MCB [ Make - Legrand/ABB/Schneider ] [ 7/D-6 ]

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs as per GS. -- 40 A DP Isolator [ Make - Legrand/ABB/Schneider ] [ 6/D-5 ]

63 A DP [ Make - Legrand/ABB/Schneider ] [ 6/D-5 ]

63 A FP [ Make - Legrand/ABB/Schneider ] [ 6/D-5 ]

Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection.100A Four Pole[ Make - Legrand/ABB/Schneider ] [ 10/D-8 ]

Supplying and fixing double door sheet steel (16SWG), powder coated cable end box for TPN DB horizontal / vertical enclosure with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment 4 way, Vertical [ 16/D-12 ]

SUB-HEAD 4 -- POLYTHENE PIPE AND WIRES Cutting channel of 40 mm x 40 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works. 19 mm dia 3 mm thick polythene pipe without earth continuity wire. [ 3(a)/ E-2 ]

Cutting channel of 43 mm x 43 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works. 25 mm dia 3 mm thick polythene pipe without earth continuity wire [ 4(a)/ E-2 ]

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (RR/Finolex/Polycab) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. 3 x 22/0.3 (1.5 sqmm) [ 1(b)/E-9 ] [ For 6A S.P.B. ]

2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) as ECC [ 1(s)/E-9 ] [ For ComB, 16A D.P.P. ]

2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) as ECC [ 1(v)/E-9 ] [ For AC Pt. & Geyser Pt. ]

2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) as ECC [ 1(y)/E-9 ] [ For SPNDB ]

4 x 126/0.4 ( 16 sq mm ) + 2 x 80/0.4 ( 10 sq mm ) ECC. [ 1(g1)/E-9 ] [ From VTPNDB to TPNDB ]

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes as per GS. 2.5 Sq mm [ 9(i)/ F-5 ]

4 Sq mm [ 9(ii)/ F-5 ]

6 Sq mm [ 9(iii)/ F-5 ]

10 Sq mm [ 9(iv)/ F-5 ]

16 Sq mm [ 9(v)/ F-5 ]

SUB HEAD 5 -- SUPPLY OF CABLES Supply of 4 Core PVC/XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes. [ Make - Polycab/Gloster/RR ] 4 core 50 Sq. mm Cable. [ NS ] [ For Incoming of VTPNDB ]

SUB HEAD 6 -- LAYING OF CABLES Laying of cable from 3/3½ core 35 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire as per GS. -- [ 2(c)/F-1 ] [ For 4 Core 50 Sq mm. ]

Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damagesas per GS. --Above 35 sqmm to 95 sqmm at an average depth of 100 mm in floor/pavement/wall etc. [ 5(ii)/F-3 ] [ For 4 Core 50 Sq mm. ]

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry as per GS. For 4 core 50 Sq. mm. [ 7(c) /F- 4 ]

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make) as per GS. 4 core 50 Sq mm. cable [ NS ]

SUB HEAD 7 -- FIXING OF LIGHT FITTINGS Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire as per GS. - [ 17/C-2 ]

Fixing only single/twin florescent light fitting complete with all accessories Directly on wall/ceiling with HW block and suitable size MS fastener, Ceiling plate, nipples etc. as required. [ 14(d)/C-2 ]

Fixing only lamp. [ 11/C-2 ]

Fixing only 18 Watt Round Shaped Surface Mounted LED Ceiling light fitting fixed directly on Ceiling with necy. arrengements as required. [ NS ]

Fixing only Mirror light fitting on wall by screws, washers, nuts etc. as required. [ NS ]

Fixing only Single Head Wall Light fittings fixed directly on wall incl. necy. arrangements by nuts, bolts, screw, washers etc. as required. [ NS ]

SUB HEAD 8 -- SUPPLY OF LIGHT FITTINGS Supply & Delivery of Single LED Fitting (18 watt, 230 V AC, 50 Hz, 5700K CDL, THD< 10%, built in 2.5 KV SPD) with all accessories and 1 nos. LED Tube, as directed by EIC, Luminious efficacy > 105 & <120 Lumen/watt. The LED luminaves & accessories shall have BEE certification. [ NS ]

Supply & Delivery of Twin LED Fitting (18 watt, 230 V AC, 50 Hz, 5700K CDL, THD< 10%, built in 2.5 KV SPD) with all accessories and 2 nos. LED Tube, as directed by EIC, Luminious efficacy > 105 & <120 Lumen/watt. The LED luminaves & accessories shall have BEE certification. [ NS ]

Supply of 9 Watt LED lamp to the lamp point. [ Make - PHILLIPS, Colour - Cool Day White, Lamp Base - B22, Pin type /Wipro ] [ NS ]

S & D of 220-240 V, 50 HZ, 18 Watt, 1800 Lumen, Round shaped Surface mounted LED ceiling light [ Make - Crompton, Generic Name - PEARL NIO - S, 18 Watt Round Full Glow LED Surface, Cat No.- LCDSPLN-R-18-CDL - 582107, Colour - Cool Day White /Philips]

S & D of 7.5 Watt LED wall/Mirror light ( Colour - White ), Make - Phillips, Code - 34034/14/86 / Crompton [ NS ]

Supply of 0.5 Watt LED lamp to the lamp point. [ Make - PHILLIPS, Colour - Yellow/Warm White, Pin type /Crompton/Wipro ] [ NS ]

S & D of Decorative type wall light fittings -- Single Head Stylo Wall Light, Model No.- 34303, Material - Metal, Colour - White & Silver, Lamp Base - B22d / Crompton/Wipro]

SUB HEAD 9 -- FIXING OF FANS Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages as per GS.-- [ 29/D-14 ]

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [ 10/E-18 ]

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. [ 21/(a)/C-3 ]

Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length. [ 29/C-4 ]

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible as per GS. --23 cm. ( 9 '') [ 28(a)/C-4 ]

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) For Aluminum, 23 cm. Exhaust Fan ( 9 '') [ 32(a)/D-14 ]

SUB HEAD 10 -- SUPPLY OF FANS Supply of ceiling fans complete with all accessories having the following Model / Cat No. [ Make - Crompton Greaves/Orient ] 900 mm Sweep AC Ceiling Fan , Colour - White, with safety wire & PS 2 Capacitors. [ NS ]

1200 mm Sweep AC Ceiling Fan , Colour - White, with safety wire & PS 2 Capacitors. [ Make - Crompton Greaves/Orient ] [ NS ]

Supply & Delivery of 230 Volt AC [ Make :- CROMPTON, WM S STORM 2, All Metal type, Sweep 450 mm/ Equivalent make - Orient Electric ] Wall Mounting Fan. [ NS ]

Supply & delivery of Exhaust Fans complete with all accessories having the following Model/ Cat No. [ Make - EPC Heavy Duty ] 9 '' ( 230 mm ), Speed - 1370 RPM [ NS ]

SUB HEAD 11 -- MISCELENEOUS Supply & Fixing wooden Meter Board on wall of size 2' x 1.5' by MS angle frame ( 50 mm x 50 mm ) incl. provision for fixing the 1 (One) nos. Three phase meter with supply & fixing 250/415 Volt, 3 Nos. 100 Amp Fuse Base and Bridge including 1 Nos. Neutral link incl. painting the wooden board as per direction of E.I.C. [ NS ]

Supply & Laing of Meter Loop connection incl. Supply & fixing 4 x 35 sqmm PVC single core multi stranded copper wire( RR /Polycab/ Finolex) through PVC flexible pipe ( 3 meter. of Length of each Phase wire & Neutral wire i.e. 3 x 4 = 12 Mtr. of total length ) from Meter to Cut - Out and Cut - Out to Incoming of Main Switch with proper socketting by Pin/Ring type copper lugs of required sizes as per the direction of EIC. [ NS ]

Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling. [ 22/D-13 ]

Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board. [ 20(a)/D-13 ]

Making holes on RCC ceiling 125 mm depth having dia of following sizes : 125 mm depth, 50 mm dia [ 9(b)/E-3 ]

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required. -- 50 mm dia [ 11(d)/F-6 ]

SUB HEAD 12 -- EARTHING Excavation of soil for installation of Earth Electrode and filling & ramming. For Soft Soil [ 1(a)/G-1 ]

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI - Medium GI Pipe [ 2(a)/ G-1 ]

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 40 mm x 6 mm on wall having clearance of 6 mm from wall as per GS. [ 4(b)/G-2 ]

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. Solid G.I. wire -- No. 4 SWG GI wire. [ 5(a)/(i)/G-2 ]

DEBNATH ENGINEERING WORKS (BID ID -6063068)

M/S R. K. ENTERPRISE (BID ID -6062142)

BISWAJIT MANDAL (BID ID -6064452)