PIP-SDRF-Flood damages- Patchwork and Painting of Karamveli Cross Regulator Shutter

Amount

Scheme 1-Dismantling of existing shutter from the groove, demolishing the civil structure and concrete for fixing new fabricated embedded parts etc. for 3Nos. shutters.

od27208/2020_2021/MH : Dismantling of the shutters (where there is road access to the point ).from the grooves and stacking including cost of all machinery, labour all incidental and conveyance charges etc complete as per direction of departmental officer at site (weight of the unsaleable shutters and embedded parts may be calculated as 60% and un serviceable hoisting units as 80 % )

15.2.1 : Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.107 : Supply of MS round bar including cost of conveyance charges

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

od25692/2020_2021/MH : Fabrication and errection of Embedded parts for canal shutters ( up to 2 tonne weight ) and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

od25693/2020_2021/MH : Fabrication, Supply, erection and assembling of wheel track, sill seat and seal track in correct position and alignment by welding SS Embedded parts in 304L Grade as per approved specifications, drawings and directions of deptl officer at site including cost of all materials, labour, welding,shearing, grinding etc,lead and lift, conveyance, incidental and handling etc complete

Scheme 2-Supply of MS plate and MS Sections for 3Nos.Shutters.

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

Scheme 3-Patchwork for 3 Nos. Shutters

od25689/2020_2021/MH : Fabrication and supply of Structural steel canal shutters ( Up to 2 tonne weight ) /Hoisting Bridge / Platform and accessories etc. for the same as per approved specifications, drawings and directions of deptl. Officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

od27209/2020_2021/MH : Erection of the shutters (where there is aligning including cost of all machinery, direction of departmental officer at siteroad access to the point ) safely in the grooves , assembling and labour all incidental and conveyance charges etc complete as per

Scheme4-Painting of exposed surface of gate and embedded parts using epoxy coal tar paint, Supply and Fixing of new Rubber seals etc. for 3Nos. shutters.

85.114 : Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

85.116 : Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

85.118 : Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

Scheme 5- Supply & Fabrication of hoisting mechanism cover, Painting of Hoisting platform, hand rails & Ladder, Overhauling of Hoisting mechanism, Supply & fixing of new GI wire rope, Erection and conducting Trial run of 3Nos.shutters.

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

od27212/2020_2021/MH : Fabrication and supply of Structural steel canal shutters ( Up to 2 tonne weight ) /Hoisting Bridge / Platfurm and accessories etc. for the same as per approved specifications, drawings and directions of deptl fficer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

85.115 : Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

od25694/2020_2021/MH : Overhauling the hoisting mechanism consisting of drive gears,driven gears. including remove, recondition, assembling etc including cost of allmaterials, machinery, labour, all lift and lead, incidental and conveyance charges etc. complete.

od25697/2020_2021/MH : Supply & fixing of 12mm GI wire rope, applying wire rope compound, including all labour and conducting trial run etc. complete as per the directions from the department officers at site.

od28758/2020_2021/MH : Trail run the gates with its hoisting mechanism etc. including cost of all materials, machinery , labour, all lift and lead, incidental and conveyance charges etc. As per instruction of departmental officers in charge.

Bidder Name

Excellent