Loading…
Loading…
Tender Value
₹6.4 L
EMD Value
₹16,119
Closing Date
7 Jul 2026, 5:00 pm7d left
Similar tender results from the same govt authority in the past 3 years.
Assistant Engineer
AE,Paralam GP
GENERAL-341/26 Improvement of basic infrastructure facilities for vanitha parisheelana kendram -Ward 11-Paralam GP-maintenance -General Civil Work
2026_LSGD_858126_4
AE/LSGD/PRM/26-27/ET3
Open Tender
Civil Works - Buildings
Paralam GP
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,425
Yes
₹16,119
Yes
30 Jun 2026
30 Jun 2026
9 Jul 2026
30 Jun 2026
7 Jul 2026
30 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1building maintenance | |||||
| 1.001 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | - | kg | - | - |
| 1.002 | OD517000/2025-2026:Modified 50.10.2 and 10.16 Steel work for purlin/single section (round square or rectangular hollow tubes etc) for trusses etc including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | - | kg | - | - |
| 1.003 | OD517003/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and
pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total
coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester
top coat 15-18 microns.Sheet should have protective guard film of 25 microns
minimum to avoid scratchesduring transportation and should be supplied in
single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall
be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM
seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding
the cost of purlins, rafters and trusses and including cutting tosize and shape
wherever required | - | sqm | - | - |
| 1.004 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | - | metre | - | - |
| 1.005 | OD522583/2025-2026:Supplying and fixing 150mm dia PVC half cut section with brackets at the end of sheet or tiled
roof for rain water collection including all cost and materials, conveyance, labour charges etc.
complete | - | metre | - | - |
| 1.006 | 50.18.9.18.2:Providing and fixing PVC pipes including fixing the pipe with clamps/Clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 4 Kfg/cm2 - External work - Exposed on wall | - | metre | - | - |
| 1.007 | 2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil | 1 | cum | - | - |
| 1.008 | OD522680/2025-2026:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M- 30 grade made by block making machine with strong vibratory compaction, of approved size,design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of 6mm aggregate , filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. Modified data of 16.68 | - | sqm | - | - |
| 1.009 | OD522697/2025-2026:Providing and laying Ceramic floor tiles of size 600x600mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown laid on 20mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. | 1 | per sqm | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.34 MB
viewnit.pdf
Tender Documents • 0.03 MB
viewsbd.pdf
Tender Documents • 1.63 MB
BOQ_1450686.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid