PROVN OF HARDSTANDING WITH PAVER BLOCK NEAR AGE B/R III OFFICE AND CERTAIN HOUSES AT KATARIBAGH, PROVN OF STEEL GRATING TO DRAIN NEAR 224 MEN (KOCHI BLOCK) AT SIGNAL SCHOOL NAVAL BASE KOCHI

Amount

Surface excavation in soft/loose soil n exc 30cm deep and averaging 15cm deep and getting out etc complete all as specified and directed.

M&L for Hardcore of broken stone of guage n.exc 63mm deposited spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface all as specified and as directed.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate 75mm thick as in sub base etc complete all as specified and directed.

M&L for coarse aggregate for granolithic floors graded from 12.5mm to 4.75mm spreading and levelling in layers n exc 25 cm thick and well ramming including watering as required etc complete all as specified and directed.

S&F Machine pressed precast concrete interlocking paver blocks any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment etc complete all as specified and directed. Note :- Colour of paver block shall be as approved by GE

M&L for Cement concrete type B-0, 1:2:4 (12.5mm graded stone aggregate) for coping or chamfered on edges of machine pressed precast concrete interlocking paver blocks etc complete all as specified and directed.

Excavation in trenches,not exceeding 1.5 M wide and not exceeding 1.5 M in depth for foundation , not exceeding 10 Sqm on plan and getting out etc complete all as specified and directed.

M&L for returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm all as specified and as directed .

M&L for removing excavated material out side MD land and depositing where directed at a level n exc 1.5 m above starting point all as specified and as directed .

M&L Cement concrete 1:4:8, Type D2 using 40mm graded stone aggregate for foundation all as specified and as directed.

M&L Pre-cast cement concrete block masonry with solid blocks Type C1 ,1:3:6(using 20 mm graded stone aggregate) , exc. 10 cm in width and setting in mortar 1:6, complete all as specified and as directed .

M&L PCC 1:3:6 type C1 using 20mm graded stone aggregate as in coping, including weathering, slightly rounded or chamfered angles and throating as directed complete including necessary formwork all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement all as specified and as directed

M&L for two coats of cement base paint over one coat of alkali resistant primer including preparation of newly plastered surface all as specified and as directed .

Excavation in post holes (or similar holes) each n.exc 0.5 cum,getting out returning filling in and ramming earth or broken rubble mixed with earth around,in layers not exc 25 cm watering and removing surplus soil to a distance n exc 50 mand making good surface in soft/loose soil all as specified and as directed .

M&L for cement concrete in PCC 1:3:6 Type C2 using 40 mm graded stone aggregate for filling in post holes etc all as specified and as directed.

S&F framed work such as MS grill with with ends of bar shouldered and or rivetted ,forged into spikes, framed guard bars,railings horizontal and vertical with ends of bar shouldered and riveted or forged into spikes, framed guard bars etc conforming to Fe 290, Gde-E-165. complete all as specified and as directed.

M&L for preperation of new metal Surfaces of any description, over10cm in width orgirth,not otherwise described and apply two coats of anti corrosive paint and over a coat of primer all as specified and as directed.

Demolition of brickwork/stone/boulder built in cement mortar including all quoins, arches, pillars etc including pumbing / bailing out water as per site requirements complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement all as specified and as directed

M&L for preparation of new metal surfaces of any description, over 10cm in width or girth,not otherwise described and apply two coats of synthetic enamel paint over a coat of primer all as specified and as directed.

SUKU CONSTRUCTIONS

Aarjay Tech Engineering

Anaswara Constructions

Albert Rebello and Company

Trishan Enterprises

Classic Builders

ANIE JOHN CONTRACTORS

THOMSONS CONSTRUCTIONS

M/s Antony Kallarakkal

M.J. Leons and sons