Repairing and renovation work of post office geri campus, race course, vadodara

Name of work: Repair and renovation work of existing Post Office at GERI Campus, Vadodara

Quantity Unit It. No. Item Rate Amount

Demolition including stacking of serviceable materilas and disposal of

1.25 Cum. 1 unserviceable materials with all lead and lift. (i) R.C.C. work 1084.30

Demolition of Brick work and stone masonry including stacking of

7.64 Cum. 2 serviceable materilas and disposal of unserviceable materials with all 564.16

lead and lift.(ii) In Cement Mortar.

Providing and fixing in position collapsible steel shutters with vertical

channels 20 x 10 x 2 mm braced with flat iron diagonals 20 x 5 mm

size with top and bottom rails of T_rin 40x 40 x 6 mm with 38mm dia,

steel pulleys complete with bolts, nuts, locking arrangements,

stoppers handles including applying a priming coat of red lead paint.

Painting two coats (excluding priming coat) on new steel and other

metal surface with synthetic enamel paint, brushing to give an even

shade including cleaning the surface of all dirt, dust and other foreign

Appliying wax polish on previously wax polished wood and wood

based surface with bees wax polish in proportion of :1.5 :1:0.5 (2-

54.48 Sqm. 5 Bees wax : 1.5 Linseed oil : 1- Turpentine : 0.5 varnish by weight to 37.67

give an even surface including cleaning the surface of all dirt dust and

sand papered smooth

Carrying out timber treatment to all wood work including drilling holes

and spraying oil based chemical solution on surface of timber work

for termite control including labor and material etc. complete. Using

Chlorpyriphos20 EC as per 6313 2013 Part III (1% concentration by

mass) is recommended one litre chemical emulsion diluted with

liters of kerosene. Total diluted concentration will be 20 liters inclusive

of 1 liter chemical emulsion application in drilled holes and 0.75 / Litre

chemical per one Sqmt two coat on wood surface not protected by

paint or varnish

Polishing of existing Kota stone flooring by machine grinding in

stages using diamond abrasives and polishing compound, cleaning

the surface of all dirt, stains, grease, and loose particles, applying

polishing materials, and buffing with polishing machines to achieve

uniform smooth surface and shine as per approved sample, including

polishing of all skirting and vertical surfaces manually with matching

finish, complete in all respects as per direction of Engineer-in-Charge.

Providing and laying polished Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse

sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and

jointed with grey cement slurry mixed with pigment to match the

shade of slab including rubbing and polishing etc. complete. (A)

Providing and laying polished kota stone slab 25mm thick in risers of

steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3

2.96 Sqm. 9 (1-Cement : 3 coarse sand) and jointed with gray cement slury mixed 1149.52

with pigment to match the shade of slab including rubbing and

polishing etc. complete.

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in

Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B) Conventional

Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4

(1- Cement : 4 -coarse sand ) in Superstructure (B) Conventional

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering upto

floor two level and finished even and smoothi in (i) Cement mortar 1:3

(1-cement:3-sand)

Providing and laying Ceramic tiles 6mm thick in flooring treads of

steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-

cement : 3-coarse sand ) finishing with flush pointing in white cement.

Providing and laying coloured glazed tiles of the size 300 mm x

mm x 8 mm / 300 mm x 450 mm x 8 mm in skirting, risers of steps

and dedo on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse

sand) & jointed with white cement slurry

Providing and fixing window having extruded aluminum Colour

anodized section frame main outer size 95mm x 24mm x 1.17mm @

wt.of 0.738 Kg/mt , horizontal Three track member size 92mm x

31.75mm x 1.30mm,@ Wt.1.07 Kg/mt , vertical member of size

92mm x 31.75mm x 1.50mm @ Wt. 1.06 Kg/mt with sliding shutters

of horizontal member size 40 mmx18mm x1.29mm @ wt.of

Kg/mt, vertical member of size 40mm x 18mm x 1.29 mm @ wt.of

0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted float

glass in two track and fly proof galvanised MS wire gauge in one track

with powder coated aluminum fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details etc

Providing & Fixing in position standard extruded approved colour

anodised Aluminum Ventilation with outer frame of 63.50 x 38.10 x

1.95mm (Jindal Section No.4605,@ Wt 1.094 kg/Rmt ) with 5mm

thick Bajari figure adgesteble tinted louvers glass fixed to alluminium

strip blade including fixtures, fastenning, labours and equipments as

per detailed drawing as directed. For Ventilation.

Providing and fixing mirror polished 18 mm thick Selected colour

Granite stone with full round edge and polished of approved quality in

clading on sill and around the doors/ windows/ ventilation with 12 mm

thick cement mortor CM (1:4) and fixing with cement slurry &

adhesive including moulding of exposed edges as directed by

engineering in charge etc. complete.

Providing and fixing Safty Grill of required pattern for windows/ Door

using necessary M.S angle/ M.S pipe, M.S flats and other structural

594.80 Kgs. 18 steel at required spacing including cutting, welding and fabriction etc. 108.58

including one coat of primer of approved quality and two coats of oil

painting as per detail drawing etc complete.

Providing and laying controlled cement concrete M-200 and curing

etc. complete including the cost of form work and Excluding cost of

reinforcement for reinforced concrete work in Chhajja for Ground

Providing and laying controlled cement concrete M-200 and curing

etc. complete including the cost of form work and Excluding

reinforcement for reinforced concrete work in (c) Lintal for Ground

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

375.94 Kgs. 21 bending, binding and placing in position complete upto floor two level 77.29

Removing dry or oil bound distemper by a washing and scraping and

547.18 Sqm. 22 sand papering the wall surface smooth including necessary repairs to 11.58

scratches complete.

Removing dry or oil bound distemper by a washing and scraping and

157.86 Sqm. 23 sand papering the Ceilings surface smooth including necessary 13.22

repairs to scratches complete.

Removing and scraping of old deteriorated plaster of any thickness

fromm wall / R.C.C member including stacking of serviceable material

and disposal of unserviceable from site of work with all lead and lift

Applying two coats of putty & two coats of primer of approved brand

and manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth.

Wall painting (two coats) with plastic emulsion paint of approved

brand and manufacture on undecorated wall surface to give an even

547.18 Sqm. 26 shade including throughly brushing the surface free from mortar 80.87

droppings and other foreign matter and sand papered smooth.

Ceiling painting (two coats) with plastic emulsion paint of approved

brand and manufacture on undecorated Ceiling surface to give an

157.86 Sqm. 27 even shade including throughly brushing the surface free from mortar 86.42

droppings and other foreign matter and sand papered smooth.

20mm thick sand faced cement plaster on walls upto height

metres above ground level consisting of 12mm thick backing coat of

C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1

(1-cement : 1-sand) etc. complete.

Applying two coats of primer of approved brand and manufacture on

new wall surface to give an even shade including thoroughly brushing

the surface free from mortar dropping and other foreign matter and

sand papered smooth.

Finishing wall with weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains of

loose powdered materials.etc complete

Providing and fixing floor-mounted vitreous china washdown water

closet (Western type) of approved make (e.g., Parryware Verve AM or

equivalent), including soft-close seat cover, dual flush cistern (3/6 litre

capacity), suitable trap (S or P), flush pipe connection, CI/PVC soil

pipe connection up to floor trap, with necessary fittings, nuts, bolts,

rubber gaskets, and sealants as required. The rate shall also include

fixing of chrome-plated health faucet with 1.2 m flexible hose, wall

hook, and CP angle valve, including all necessary accessories, minor

plumbing works, testing, and commissioning, complete in all respects

as per manufacturer’s specifications and direction of Engineer-in-

Providing and fixing 450mm Dia Wall - mounted Vitreous China Wash

Basin (e.g., Parryware Vibe or equivalent of approved make and

including necessary CP brass fittings such as pillar cock, CP angle

valve, Waste Coupling 32 mm dia, CP Bottle trape, Angular Stop

3.00 Nos. 32 cock and sealing with white cement/epoxy sealant. The rate shall 9491.78

also include necessary plumbing connections, drilling/grouting of

anchor fasteners, and making good the wall surface after installation.

Complete in all respects as per direction of Engineer-in-Charge

Providing and fixing 15 mm nominal bore CP brass bib tap (bib cock)

of approved make (e.g., Parryware Claret or equivalent), including all

required PTFE tape, washers, minor fittings, and making proper

3.00 Nos. 33 watertight threaded connection to CPVC/GI pipe, including testing, 1140.89

cleaning, and finishing, complete in all respects as per manufacturer’s

specification and direction of Engineer-in-Charge.

Providing erecting and fixing Triple coated ISI water tank of required

3000.00 Litres 34 capacity each with all necessary fittings and connection etc. complete 11.11

Providing laying and jointing in true line and level 25mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

40.00 Rmt. 35 clamp at every two metre C/C or shall be concealed as directed 91.84

including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level 15mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

35.00 Rmt. 36 clamp at every two metre C/C or shall be concealed as directed 72.65

including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all

Providing, laying and jointing in true line and level 110 diametre

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain

and other end socketed with rubber ring, & fittings conforming to ISI

14735-1999 of approved make for drainage system pipe line, pipe

shall be jointed with each other with rubber lubricant, pipe shall be

30.00 Rmt. 37 fixed on wall using of PVC clamp of the size 110 mm diametre x 149 856.03

mm length x 145 mm heigh at every 2000 mm center to center or

shall be concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and joints and

jointed with adhesive solvent cement including cost of all materials.

Providing laying and jointing in true line and level 50mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

20.00 Rmt. 38 clamp at every two metre C/C or shall be concealed as directed 195.67

including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level 75mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

20.00 Rmt. 39 clamp at every two metre C/C or shall be concealed as directed 737.30

including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all

Providing and fixing vitreous china manual flush urinal (Star White

color) of approved make (Hindware or equivalent), including

necessary CI brackets, inlet and outlet CP fittings, standard flush

valve (pressmatic), fixing with screws and rawl plugs, testing,

commissioning, and all complete as per the direction of the Engineer-

Supplying and fixing SS Cup Type Nahani Trap of approved make

and design, with 100 mm dia grating fittings like elbows/couplers, and

4.00 Nos. 41 solvent welding, complete with testing, cutting, fixing in floor level as 1140.89

per specifications and direction of Engineer-in-Charge.

Providing and fixing FRP frame size 125x65 mm and 35mm thick

FRP shutter with wood grain raised panneled design finish shutter

having extra reinforcement on sides & edges in Gel coat finish. The

core of the shutter & frame is to be filed up with injected polyurethene

foam done in situ alongwith embedded wooden pieces for stiffening &

also taking hinges & fintures. The whole FRP frame & shutter is to be

water proof weather proof, termite proof & resistance to mild

acid/alkali. Rates are to be inclusive of S.S hinges with fastener

sleeve & alluminium fixtures & fastenings.

Scraping oil paint from steel and other metal surface and making the

surface even (with Hand Scraping.)

Painting one coats (excluding priming coat) on previously printed

steel and other metal surface with synthetic enamel paint, brushing to

give an even shade including cleaning the surface of all dirt, dust and

other foreign matter.

Providing & fixing in position standard extruded Alluminium partition

with 5mm thick Top portion fix Glass and 18mmthick Down portion

prelaminated partical board with anodized section for outer frame size

63.00 x 38.10 x 1.47 mm of approved shade aluminum standard

33.45 Sqm. 45 section and providing rubber gasket around the glass and partical 3209.78

board around aluminium glasing cleat and inserting wooden pieces at

joint and fixtures portion including all required materials labours and

equipments as per detailed drwg. as directed.

Providing and laying broken chine mosaic flooring for terrace using

12 mm to 20 mm broken pieces of glazedtiles to be laid over cement

mortar 1:3 to plain or slope and to be tempered to bring mortar creme

out upto surface using white cement including rounding off junctions

and extending them upto 15 cm along the wall,clearing with water and

oxalic acid etc. as directed.

Structural steel work (Confirming to IS 4923-1997) riveted, bolted or

welded in builtup for all type sections, in framed work, including

cutting, hoisting, fixing in position and applying a priming coat of

approved steel primer all complete as per the structural designs and

directions of Engineer in charge.Column ( 122 x 61 x 3.6mm )

Providing and Fixing 6 mm thick Lexan Polycarbonate multi all roofing

sheet fixed with hilti screw and rubber silicon sealer and alluminium

strip of size 50 x 3 mm etc complete as directed by Engineer in

Rehabilitation of RCC member in RCC structure for the building upto

any height above ground level by providing additional reinforcement

and by Polymer Modified Mortar as per following operation and

direction of Engineer-in-charge.

Providing and executing injection / pressure grouting in cracks in the

parent concrete/ brick work or in honey-comb area by fixing-up PVC

or metallic grout-nozzles on line of crack in concrete/ masonary at a

distance not exceeding 300mm injecting with the help of grout-pump

working at a pressure of 3.00 kg/cm2,Pressure grouting to be done

using low viscous 2-component epoxy crack injection material "

Lanko 721 "of Parexgroup , "Conbextra EP 10 ( M )" of Fosroc, "

Concresive 1315" of BASF or equivalent make shall be done in a

280.00 Nos. 50 sequence starting from lowest grout-hole and procedding to the next 499.80

upper one, sealing the grout nozzles temporarily, on the next day

repeating the grout sequence once more before cutting and sealing

the nozzles permanently.Finally patching up the plaster with cement

mortar ( 1: 3 ) proportion using plasticiser to increase workability,

curing with water sprinkler for minimum three days including finishing

the edges of the patch/groove with birla putty/plaster paris, for even

matching with the adjacent plaster area etc.complete.

Drilling hole of required diameter and depth as directed for fixing of

Rebars using hammer drill.Cleaning the hole using mechanical air

blower, water jetting etc.Providing & fixing rebar in the drilled hole

using approved make Chemical grout and sealent with necessary

scaffolding , staging, labour , tools , and equipments etc. complete

and the work shall be carried out by the technical workmens/agency

approved by the manufacturer and under technical supervision of

Manufacturer of Injection grout.etc. complete as directed by Engineer-

For 10 mm. dia.bar - Depth 100 mm

Providing and fixing 8 mm dia L- shape TMT bar shear connector,

200 mm long for slab, beam and columns including drilling hole,

cleaning hole properly with electro-mechanical blower, using

241.00 Nos. 52 approved make chemical grout in the hole, placing L-shape shear 197.02

connector in position to ensure the bond. Item includes cost of TMT

bar also etc, all complete as per direction of Engineer in Charge.

Filling available excavated earth (excluding rock) in trenches. plinth,

sides of foundations etc. in layers not exceeding 20 cm. in depth

consolidating each disposited layer by ramming and watering.

Excavation for foundation upto 1.5 m depth including sorting out and

840.95 Cum. 54 stacking of useful materials and disposing 188.31

off the excavated stuff upto 50 Meter lead.(C) Hard Murrum

Providing and fixing pre-cast Rubber Dye / steel Dye interlocking

concrete block 60mm thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 30 cm excavation, 20 cm

compacted filling, 10 cm M10 PCC and 35 mm Sand layer for

levelling and filling the joint with sand in proper line and level as per

guidlines of IRC : SP 63-2018 etc. Complete.

For 1.5HP 3 phaseopen well horizontal monoblock pump set suitable

1.00 Each 56 for 190LPM@ 20mtr headsuitable for 40 mm dia delivery pipe 10284.83

Supplying & erecting approved make motor control cubical panel

(Direct - on - line) made from 16 G. CRCA sheet duly epoxy powder

painted inside and outside with hinged doors and locking,

arrangement consisting of suitable size of ON- OFF isolator (AC -

3/23duty) main fuses, single phasing preventer, indicating lamps for

R- Y - B phases, overload relay, Automatic water level controller,

1.00 Each 57 Ammeter, Voltmeter each with two way selector switch incoming, 7722.46

wires duly socket crimped, main contactor & overload relay, start -

stop push buttons, to be erected on angle iron frame grouted on wall

as directed. The isolator, overload relay & contactors will be of L & T,

Siemens or BCH make only.

DOL for 5.0 H.P.

Providing and fixing pre-cast concrete kerb stone of gray cement

based concrete block 30cm length,30cm height and 15cm thick of

258.20 Rmt. 58 M200 grade concret as per approved design and including excavation 394.59

for fixing in proper line and level,filling the joint with C:M 1:3

(1cement:3fine sand) etc complete.

Carring out plinth treatment to post construction / existing structure by

spraying chemical solution for termite control treatment including

labour and material consistment with I.S.I specification. Using

Chlordene and Chiorpurfiles 20 EC. As Per 6131_paret-II

79.14 Sqm 59 Consentration Weight one percent is recommended i.e one litre 20 97.18

EC chemical emulsion with 19 liter give 1 % concrentration inclusive

of one litre chemical emulsion appication at the rate of 5 Litre

chemical / Sqm of surface is recommended as per I.S

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length , in below type

of pipe erected with 6A Modular type switch /bell push & accessories

and earth continuity of following type, erected on PVC/

Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp holder/ceiling rose

/H.D.Connector as directed.

(A) with medium class Rigid PVC pipe and accessories erected

flushed on wall/ceilingcomplete

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

erected with 6A Modular type switch and hum free EME step type

electronic fan regulator mounted and accessories with earth

continuity of following type erected on PVC / Metallic/Wooden box,

16.00 No. 61 single mounting base frame covered with textured/metallic/white front 638.32

plate modules erected on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete

Point wiring for on board Looped Plug with 6A Modular type switch &

5 pin socket erected on PVC / Metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate modules

erected on / in wall / ceiling with following type accessories

Providing & erecting Switch board for Computer or electric apparatus

consisting of following modular type accessories mounted with PVC /

Metallic concealed/open box with single mounting base frame

covered with textured/metallic /white front plate,modules erected with

20.00 No. 63 necessary connections as directed 1133.22

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as

a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company mark/name 160V to

270V, Power Factor more than 0.95, THD < 15%,CCT 3000 K to

6500K, Luminaire efficacy> 85 lumens/watt ,LED LED driver

24.00 No. 64 efficiency > 85 % 535.30

(fitting required LM-79 & LM-80 Certificates)(NOTE:Below description

have shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges

(A) Tube Light with integral driver

36-40 Watts, Surge-2 KV, IP-20, conventional 4 feet

Supplying and erecting led lamps with following wattage capacity of

220 to 240 voltage, minimum 15000 burning hours life, 500 V in built-

surge protection,Polycarbonate diffuser, mounting suitable for E14 /

E27 / B22 lamp holders, pf >=

(A) LED Lamps integral type, with PC diffuser suitable LAMP holder

(iii) 10 to 15 watts

Providing & erecting fresh air fan 250 mm dia with square frame

8.00 No. 66 make of ABS body with louvers 1559.44

providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking

12.00 No. 67 capacity 10 KA to be erected in existing box. confirming to IS 112.11

8828/1996 with ISI Mark

Providing & erecting 415V MCB Four Pole for Motor & Inductive Load

(C Curve) having 10KA breaking capacity & confirms to IS:8828 in

existing box having following capacity

(b)40 Amp. Cat.iii

Providing and erecting Sheet Steel powder coated MCB distribution

board - flush / surface mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without

MCB to house appropriate nos. of MCBs.(The DBs should be used of

1.00 No. 69 same company of MCB to be used) suitable forc 2339.16

(B) three phase incoming and single phase horizontal type outgoing

Per phase isolation type (PPI)

(b)Sheet Steel double door(i)4 Way

Plastic enclosure fitted with DIN rail suitable for incorporating Three

providing and erecting Approved make RCCBs conforming to IS:

12640 and having sensitivity of 30 mA and Short Circuit withstand

capacity of 10 KA and suitable for operation on single phase

V,50Hz. having characteristic of quick action & tripping with all

3.00 No. 71 advance feature & do not incorporate any electronic component. for 2235.13

following Max. rating erected as directed

(ii) 40 Amps. DP

Supplying & erecting Sheet Steel powder coated Cable end

termination Box to be mounted on Top or Bottom of the MCB

2.00 No. 72 Distribution Box for housing/covering Extra wires & Cables, suitable 291.89

for following size of MCB DB Box.

(B) Single Phase 6 Way

Supplying & erecting Sheet Steel powder coated Cable end

termination Box to be mounted on Top or Bottom of the MCB

2.00 No. 73 Distribution Box for housing/covering Extra wires & Cables, suitable 326.23

for following size of MCB DB Box.

(B) Single Phase 8 Way

providing and erectingMains with 1.1KVgrade FRL SPVC insulated

ISI marked stranded Copper conductor wire in following type of pipe

to be erected in/onwall /ceiling with 2.5 sq.mm copper conductor

FRLSPVC insulated stranded wire of green colour for earth continuity

of following size

(h) 4 wire 6 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated

ISI marked stranded Copper conductor wire in following type of pipe

to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor

50.00 Rm. 75 FRLS PVC insulated stranded wire of green colour for earth continuity 260.58

of following size

(A) (A) with medium class Rigid PVC pipe and accessories

(a) 4 wire 6 sq. mm

Supplying & erecting 20 Amp 10 KA ‘C Curve’ single pole MCB with

3.00 No. 76 20 Amp. Plug socket, company fabricated powder coated sheet steel 527.22

enclosure erected as directed with connection.

Providing & fixing White River (Stone) Pebbles size of 2" to 2.5" dia in

natural colour at site of work including loading, unloading, carriage

and all taxes paid etc.and as per direction of officer in charge

Fine dressing of the ground including levelling, clearing of debris,

1510.34 Sqm 78 stones and unwanted material to make the ground suitable for garden 18.13

work, as per direction of Enginner-in-charge.

Spreading of sludge, dump manure and/or good earth in required

thickness as per direction of officer-in-charge

Grassing with selection No. 1 doob grass including watering and

maintenance of the lawn for 30 days or more till the grass forms a

thick lawn, free from weeds and fit for mowing including supplying

good earth With Grass Turf

Providing and stacking of Duranta Golden, having ht.15 to 20 cm

bushty shape with fresh and healthy leaves in 15 cm size of

Earthen Pot / Plastic Pot & as per direction of the officer-incharge..

Providing, supplying, installing, testing and commissioning of garden

sprinklers rated for 2.0 to 3.0 kg/cm² for irrigation system including

12.00 Each 82 connection, sprinkler heads, valves, fittings, and all accessories 2222.00

complete in all respects as per approved layout, specifications and

direction of Engineer-in-Charge.

Providing and supplying in standard length ISI mark high density

Polyethylene H.D.P.E. Pipes suitable for potable water as per IS

specification no. 4984/1995 including all local and central taxes,

transportation, freight charges, octroi, inspection charges, loading,

unloading, conveyance to the dept. stores etc. comp

(1) Rate for HDPE (PE-100) Pipe based on the rate of HDPE Resin

Providing and supplying in standard length ISI mark high density

Polyethylene H.D.P.E. Pipes suitable for potable water as per IS

specification no. 4984/1995 including all local and central taxes,

transportation, freight charges, octroi, inspection charges, loading,

unloading, conveyance to the dept. stores etc. comp

(1) Rate for HDPE (PE-100) Pipe based on the rate of HDPE Resin

Providing and erecting approved make splitair conditioning unit

consisting of copper condensing unit with fanmotor, hermetically

sealedrotary compressor with accessories etc. duly connected

separately erecte devaporating unit and blower motor with its

accessories by means of extra supplied proper insulated copper

tubing,drainPVCpipes suitable for ( cost includes powder coated

Stand, Eco Friendlygreengascharging, 15A plug top & Remote

Control) with necessary core cutting.

Place Identification Sign :-Providing and fixing sign boards made out

of 2mm aluminium sheet / 4mm ACP (Aluminum composite Panel);

size 150x90 cms. rectangular as per design of IRC-67-2012. Pre

treated with phospheting process & acid etching; coated with one

coat of epoxy primer and two coats of best quality epoxy paint ;

reflectorised with High Intensity Prismatic Grade retro

refiectivesheeting of Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 4.0mtr (2Nos.) long stand post of Iron Angle

75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame

1.00 Each 86 fabricated from suitable size iron angle of 35 x 35 x 3mm; painted 12341.52

with bestquality epoxy coatings in black and white bends. The details

of symbol for each board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x

60 Cms. for each leg including excavation, curing etc.complete under

the supervision of engineer in charge. A warranty for 7 years for the

Retro reflective sheeting from original manufacturer & a certified copy

of 3 year outdoor exposure test report from third party test lab for the

product offered shall be submitted by contractor. (B) Class-B Type-4

Retro Reflective sheeting

Solder less crimping type Copper lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/cadmiumplated nutbolts

in an approved manner.

Supplying & erecting Galvanized M.S pipe post “B” class 88.9 mm

O.D 4mtr. Long duly painted with two coats of aluminium paint

2.00 Each 88 complete with metallic baseplate of 300 mm x 300mm x 4mm thick for 3225.94

using as a compound light pole with approx. weight 32 Kg.

Providing & erecting approved make CFL outdoor s type Post top

lantern / flying saucer type fittings cast Aluminium/M.S. Powder

2.00 Each 89 Coatedpolemounting type with BS lampholder&Clear acrylic diffuser 1498.84

with CFL lamp complete.

[C] With One No. retrofit 65 / 85 watt CFL Cat III

Providing and erecting XLPE (IS:7098) (I)-88ISI armoured cable

multistrand Copper conductor for 1.1KV. tobe laid on wall with

100.00 Rmt 90 necessary clamps or in existing trench / pipe at road crossing or floor 1504.90

of following size of cables.

(C) 4 core 25 Sq. Mm

Providing & fixing heavy duty flange type brass cable gland with

4.00 Each 91 rubber ring for PVC insulated armoured cable, complete with out- 51.51

going tails & insulating tape –2 to 4 core 25 Sq. Mm

Solder less crimping type Copper lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/cadmium plated

nutbolts in an approved manner.

Providing and erecting Sheet Steel powder coated Vertical MCB

distribution board (VTPN) flush / surfacemounted double door (IP54)

fitted with copper insulated busbar, isolated neutralbar,earth barand

2.00 Each 93 DINrail,Conformsto IS8623-1&3, IEC61439-1&3, suitable for 8402.19

63/100AMPTPNMCCB +RCCBas incomer and three phase outgoing

as per following .(The DB sshould be used of same company of MCB

Providing & erecting approved make 4-Pole Moulded Case Circuit

Breaker (MCCB), breaking capacity ICU = 25 kA at 415 V, normal

1.00 Each 94 current rating 25 A to 100 A, fixed thermal & magnetic release, AC 6790.43

supply 50 c/s, with all internal Connections, spreader tinned copper,

ICS = 100% of ICU – Cat-III

Providing & erecting Sheet Steel powder coated Vertical MCB

Distribution Board (VTPN) – flush/surface mounted double door (IP-

54), fitted with copper insulated busbar, isolated neutral bar, earth bar

& DIN rail, conforming to IS 8623-1 & 3, IEC 61439-1 & 3, suitable for

63/100 Amp TPN MCCB + RCCB as incomer, 3-phase outgoing – 4-

way outgoing (new distribution panel)

Providing & erecting Pipe type earthing with 40 mm dia. 2.5 m long

"B" grade G.I. pipe with necessary coupling & buch, buried in

specially prepared earth pit with G.I. earth wire of 8 SWG, erected &

connected as directed

Providing salt and charcoal/coke as required for pipe type earthing

Providing & erecting required size Copper strip for earthing of LT

panel board, using copper clamp

I/We am/are willing to carry out the work at…...... % above/below percent(Should

be written in figures and words) of the estimated rate mentioned above. Amount of my /our tender

works out as under.

Estimated amount put to tender Estimated amount put to

Deduct………% below Add………% Above

In words In words

1)The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for

which no extra payment shall be made.

2) The labour cess will be deducted as per prevailing rules i.e.1% of the work done.

3) GST and Income tax TDS will be deducted at a source while making payments of bills.

4) In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.G.R.:PRC-10/2017 Cement

Consumption/16/C Date:11/05/2017 as stated in S.O.R.thereforeinR.C.C.items where there is a change as per actual mix design

the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate

mentioned in all the tender.

Signature of Nodal Officer and Executive Engineer

Contractor Dam Safety Organisation