Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹39.8 LAccepted-AOC | L-1 | Accepted-AOC L-1 | |
| 2 | L-2₹41.5 L+₹1.0 L (2.58%)Rejected-AOC | L-2 | Rejected-AOC L-2 | |
| 3 | L-3₹42.7 L+₹2.3 L (5.64%)Rejected-AOC | L-3 | Rejected-AOC L-3 |
Tender Value
₹44.8 L
EMD Value
₹89,700
Closing Date
29 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I RND DELHI
MILITARY ENGINEER SERVICE, GARRISON ENGINEER (I) RND, LUCKNOW ROAD, TIMARPUR, DELHI-110054
PROVN OF EMERGENCY DOOR OPENING, IMPROVEMENT UPGRADATION OF ENTRANCE AREA OF MAIN BUILDING AT DIPR, PROVN OF SPLIT ACs FORBLDG AT LAB NO 205 AND 206 AT CFEES, SPLIT ACs FOR RECEPTION ROOM AND REFRIGERATOR FOR OR MESS AT MHSU I, RENOVATION OF WAS
2024_MES_638476_1
GE/RND-95/DLI/2023-2024
Open Tender
Civil Works
Item Rate
180 days
DELHI
Class-D, Cat-a(i)
2 documents required · 2 mandatory
₹500
GE I RND DELHI
₹89,700
Yes
22 Mar 2024
20 Jan 2024
2 Mar 2024
20 Jan 2024
29 Feb 2024
10 Feb 2024
Amount
Cutting openings, through brick walls for door, window and other openings or enlarging existing openings, converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc. to store and rubbish not exc. 50m complete all as specified and directed
Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work making good with CM 1:6, complete all as specified and directed.
Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
Material and labour for brick work with sub class ‘B’ bricks of class designation 7.5 all as per IS-1077-1992 (minimum compressive strength of brick 75 kg / Sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified and directed.
All as per ser item No 4.00 above but except bricks Note : Old serviceable bricks retrived from item ser No 3.00 shall be reused.
Taking down cement plaster any description on brick/concrete surfaces etc including raking out joints, hacking for key, scrubing down with water etc complete all as specified and directed.
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means including loading, transporting, unloading to outside MoD land from 5KM upto 20KM lead at municipal dumping ground complete all as specified and directed.
M&L 15mm thick rendering in cement mortar 1:6 on fair faces of brick works or concrete work finished even & fair without using extra cement complete all as specified and directed.
M&L 15mm thick rendering in cement mortar 1:4 on other than fair faces of brick work or concrete work, finished even & fair without using extra cement complete all as specified and as directed.
M&L for 15 mm thick Rendering on brick work or concrete surfaces in CM (1:4) mixed with WPC as per manufacturer instruction finished even and fair without using extra cement complete all as specified and as directed.
M&L 5mm thick rendering in cement mortar 1:3 on ceiling concrete work finished even & fair without using extra cement complete all as specified and directed.
M&L for 10 mm thick cement plaster in CM (1:3) as in soffits of slabs/Chajja/Sunshade finishing the plastered surface even & fair without using extra cement complete all as specified and as directed.
M&L preparation of newly plastered surfaces of walls including all cornices, pilasters etc and applying two coats of acrylic exterior emulsion paint (weather proof) of approved tint / shade(s) over and including one coat of water based alkali resistant primer complete all as specified and directed.
M&L preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper (white or tinted) over a coat of 1mm thick wall care putty including sanding complete all as specified and directed.
M&L preparation of newly plastered surfaces of ceiling and applying two coat of oil bound distemper(white or tinted) over a coat of alkali resistant primer, complete all as specified and directed.
M&L preparation of newly plastered surfaces of walls and applying two coat of oil bound distemper(white or tinted) over a coat of alkali resistant primer over and including 2mm thick wall care putty(in two layers of 1mm thickness each) , complete all as specified and directed.
All as per items Ser No 16.00 above but on ceiling surface
M&L for Complete removal of existing treatment including preparation of plastered or unplastered old decorated surfaces of walls incl pillasters and cornices etc. incl washing, rubbing down and stopping the previously treated surfaces and applying two coat of oil emulsion distemper over and including a coat of 2mm thick wall care putty, to give an even finished fair of approved shade/tint complete all as specified and directed.
All as per items Ser No 18.00 above but on ceiling surface
M&L for Complete removal of existing treatment including preparation of plastered or unplastered old decorated surfaces of walls incl pillasters and cornices etc. incl washing, rubbing down and stopping the previously treated surface and applying two coat of acrylic exterior emulsion apex paint (weather proof) of approved tint / shade(s) over and including one coat of water based alkali resistant primer complete all as specified and directed.
Taking down chowkhats with shutter without taking off shutters from the frames (area n. exc. 1.50 sqm each) including making good the disturbed surfaces complete all as specified and directed.
Taking down chowkhats with shutter without taking off shutters from the frames (area exc. 1.50 sqm but n. exc. 4.00 sqm each) including making good the disturbed surfaces complete all as specified and directed.
M&L for pressed steel frames for doors of size 105 x 60 mm with one or more rebates incl necessary fixing lugs, hinges, lock, strike plates of 50 x 3mm welded with frame for making arrangement for fixing of door spring etc. complete all as specified.
S&F solid PVC door frame of size 50mm x 47mm made out 5mm plain colour PVC sheets re-inforced with MS square tube complete all as specified and directed
S&F 30mm thick flush shutter solid core construction with block board core and ply wood face panels commercial type on both sides complete all as specified and directed.
S&F factory made solid PVC moulded door shutter 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, with wood free EPS, supplying and fixing in frame at site as per specification and drawings shown in section 8 of SSR part -II complete all as specified and as directed .
M&L for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail & bottom rail panelling of plain colour PVC sheets to be filted in MS frame welded, sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with the solvent cement complete all as specified and directed.
S&F Mild steel butt hinge medium weight , cold rolled, 100mm, ISI marked, complete all as specified and directed.
S&F barrel tower bolt aluminium anodised extruded section of size 200 mm complete all as specified and directed.
S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed .
S&F aluminium fabricated type extruded handles of size 150mm complete all as specified and directed.
S&F 300 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing cleat of sheet, cast or extruded sections, bolt not less then 12mm dia with and including a minimum of 6 bolt and nuts ,fixed on plate or staple plate complete all as specified and directed.
S&F mild steel sliding door bolts 200 mm length , plate type , stove enamelled black, with bright bolt not less than 12mm diawith and including a minimum of 6 bolts and nut, four on bolt plate and two on staple plate and fixed
S&F 250mm size aluminium alloy anodised sliding door bolt with hasp staple (bolt type ) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.
M&L for prepapration of new or previously untreated surfaces of wood or wood based materials of any description not otherwise described, over 10cm width or girth & applying two coats of synthetic enamel paint coat complete all as specified and directed.
Providing and fixing aluminium work Powder coated with thickness of section not less than1.5mm (minimum thickness of powder coating 50 micron) for frames of doors, windows, ventilator, partitions, fixed portion and frames with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws all complete as per architectural drawings and complete all as specified and directed.. Note:-Glazing and particle board to be paid for separately.
Providing and fixing aluminium work Powder coated with thickness of section not less than1.5mm (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots, tower bolts , handles, peg stay etc and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / tainless steel screws, all complete as per architectural drawings and complete all as specified and directed.
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating not less than 50 micron thick) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and complete all as specified and directed.
S&F 12 mm thick prelaminated particle board exterior grade with decorative choice lamination, prelaminated both sides of approved shades fixed to aluminium shutters/partitions etc complete all as specified and directed.
S&F 4.8 mm thick sheet glass ordinary quality, area exc 0.50 Sqm in each pane and fixing by means of glazing pins and rubber beading etc in aluminium partitions, windows, doors etc complete all as specified and directed.
S&F 4.8 mm thick sheet glass ordinary quality, area not exc 0.50 Sqm each pane and fixing by means of glazing pins and rubber beading etc in aluminium partitions, windows, doors etc complete all as specified and directed.
M&L Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets complete all as specified and directed.
S&F bright finished 100 mm mortice lock with 4 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete all as specified and directed.
S&F designer glass film of approved pattern 25 micron reflective type with designer etching, LOGO of labs etc and similar work sticked to glass panes of doors, windows, partitions etc as per manufacturer's instructions complete all as specified and directed.
Demolition of cement concrete in ground floors and pavings etc not exc 15 cm thick above or below ground level complete all as specified and directed.
S&F factory made chequered cement concrete coloured tiles 300mm x 300mm x 22 to 25mm thick, set jointed and pointed in neat cement slurry with grey cement mixed with pigment to match the colour of tiles, laid over and including 20mm thick screed bed in CM 1:6, complete all as specified and directed.
M&L for 75mm thick cement concrete type D-2,1:4:8 (40mm graded stone aggregate) as in sub base of floors complete all as specified and directed.
S&F door closer hydraulically regulated, aluminium body designation No 3, universal type, suitable for door shutter of 851 to 1000 mm in width and weight between 61 to 80 kg and fixed complete all as specified and directed.
S&F in repair aluminum (Die cast) body door closer hydraulically regulated, designation No 2 universal type, suitable for door shutters of 701 to 850mm in width and weight between 36 to 60 Kg and fixed to door frame complete all as specified and as directed.
S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty fixed including taking down and refixing of Aluminium Doors and making fully functional complete all as specified and directed.
Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar etc complete all as specified and directed.
M&L Polished Granite stone flooring with 18 to 20mm thick stone slab granite machine cut as in flooring/shelves/counter for WHB/Window cill etc bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite, in linear as well as curvilinear portions of the building all complete as per the architectural designs/ patterns laid over and including 20 mm thick screed bed of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including roudind of edges, chamfering work, moulding work, rubbing, curing and polishing etc complete all as specified and directed.
M&L Granite Stone tile (polished) work 18 to 20mm thick machine cut of any colour and shade as in skirting/dado, wall lining on garden walls, on vertical surfaces,skirting, dado etc and similar work over and including 10 mm thick rendering of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement admixed with pigment of matching shade including roudind of edges, chamfering work, moulding work, rubbing, curing and polishing etc. all complete as specified and as directed.
M & L for PCC 1:4:8 type D-2 using 40mm graded stone aggregates for sub bases of floor, mass concrete finished even and rough to receive topping layer complete all as specified and directed.
M&L 100 mm thick cement concrete type D-2,1:4:8 (40mm graded stone aggregate) as in sub base of floors, filling and mass concrete etc complete all as specified and directed.
M & L for Factory made Rubber moulded precast concrete interlocking paver block (coloured),pre polished of any shape and size with white cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade laid over and including 50mm thick sand cushioning complete all as specified and directed.
M&L for Plain Cement concrete type B-0 (1:2:4) using 12.5 mm graded crushed stone aggregate as in seismic and other similar bands, shelves, copings, bed plates, hold fasts, plinth courses, chajjas, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, filling in pressed steel frame and the like finished fair and even incl necessary form work complete all as specified and directed.
Cutting chases, pinning in RCC members/ concrete blocks and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps cills etc or for concealed water tubing etc cutting not exc 20 cm width or girth complete all as specified and directed.
Supplying and laying of CPVC pipes having outer dia 32mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.
S&F anodised aluminium powder coating aluminium section weighing not less than 0.55Kg/m (minimum thickness of powder coating 50 micron)frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified
S & F Powder coated aluminium door shutters,aluminium section weighing not less than 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminum snap beading screws, and all necessary builder hardware etc complete all as specified and directed.
Supply & Fixing aluminium (powder coated with approved colour) ventilator, partially glazed and partially louvers, outer frame & mullion fabricated with aluminium section of size 82.50 mm x 38.00 mm x 1.70 mm thick (section No 20036), half portion glazed with 4 mm thick frosted glass including rubber beading, & glazing clip, half portion louvers of 80 mm wide & 4 mm thick frosted glass including aluminium louver partti including S.S wire gauge of fixing of 0.36mm dia and 1.40 width of aperture with 25x3mm thick aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position complete all as specified and directed.
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.
Providing and fixing 12mm thick frameless Toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing including required door fittings such as SS fancy type handles, SS mortice lock complete all as specified and directed.
M&L for 12mm thick Toughned glass work as in partitions opening, serving counters, windows opening,and similar work including cutting to shape, drilling holes required anf fixed using SS fancy type clamps complete all as specified and directed.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish of the premises complete all as specified and directed.
M&L for 1st quality non-skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) joint less / joint free, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.
M&L for glazed ceramic coloured designer tiles of size 450x350x 7mm thick on vertical surface as in skirting/dado set and jointed in neat cement slurry and pointed to in white or coloured cement to match the shade of tile surface over 10mm thick rendering in CM (1:4) on complete all as specified and directed.
M&L for glazed ceramic coloured designer tiles of size 600x300x 7mm thick on vertical surface as in skirting/dado set and jointed in neat cement slurry and pointing to in white or coloured cement to match the surface over 10mm thick rendering in CM (1:4) on brick wall complete all as specified and directed.
M&L for brick work with sub class'B' bricks old size straight or curved on plan to any radius in half brick thick wall built in cement morter 1:4 etc complete all as specified and directed.
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old/new surfaces complete all specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for as in pillar, roof slab, Manhole/Septic tank/Soakage well cover slab, Chajja, shelves, lintel band etc complete all as specified and as directed.
M&L for mild steel TMT bar 10 mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia etc complete all as specified and as directed.
M&L for reinforced cement concrete (1:2:4) type B-1 (using 20 mm graded mechanically crushed stone aggregate) as in roofs/Chajjas/shelve for WHB etc complete all as specified and as directed.
Use and waste of form work to roofs, chajjas, RCC Shelves and similar work for fair finish surfaces etc complete all as specified and as directed.
S&F Mild Steel Framed work such as Guard Bar/grill welded to window frame or fixed independently, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including necessary welding work at site as required etc complete all as specified and as directed.
M&L for Welded steel wire fabric supplied and fixed complete to steel members weight not exc. 4 kg/sqm complete all as specified and directed.
M & L for preparation of new/previously untreated steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified and directed.
M&L for chipping of spalled and loose concrete and cleaning rust from reinforcement by sand blasting scrubbing down concrete surface with wire brushes cleaning with water allowed to dry and applying a layer of zinc rich epoxy primer as antirust on all exposed reinforcement followed by a layer of bounding coat of approved epoxy adhesive on complete exposed surfaces of concrete to be gunited all as specified and applying two layers of guniting over steel welded mesh 2mm dia of wire and aperture 75mm, total thickness of gunite n.exc 40mm thick (average thickness) in cement mortar (1:2) using OPC 53 grade cement mixed with polycrete admixture @ 2% by weight of cement or as per manufacturer instructions and finally applying cement plaster over gunite surface of required thickness to give even uniform and fair finish conforming to proper geometrics in cement mortar (1:3) to match the existing surface as in sides and soffits etc of slabs, chajjas, fins, facias, parapets, lintels, columns and beams etc complete including necessary scaffolding, shuttering, necessary chases to brick work or RCC members at any height upto 6 storey building including removing of small trees shrubs etc all as specified and as directed.
Taking up or down 15 mm bore steel tubing & connection including cleaning for refixing serviceable tubing or offering credit as per sch of credit complete all as specified and as directed
Taking up or down 20 mm bore steel tubing & connection including cleaning for refixing serviceable tubing or offering credit as per sch of credit complete all as specified and as directed
Taking up or down 40/50 mm bore steel tubing & connection including cleaning for refixing serviceable tubing or offering credit as per sch of credit complete all as specified and as directed
S&F steel water tubing 15 mm bore, medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors including cutting in wall /floor for pipe complete all as specified and as directed.
S&F steel water tubing 20 mm bore, medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors including cutting in wall /floor for pipe etc complete all as specified and as directed
S&F steel water tubing 40 mm bore, medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors including cutting in wall /floor for pipe etc complete all as specified and as directed
S&F steel water tubing 50 mm bore, medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors including cutting in wall /floor for pipe etc complete all as specified and as directed.
Supply and fix 32 mm dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and a n t i m i c r o b i a l welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc complete all as specified. Note:- Cutting chases for concealing the pipes & fittings etc wherever required and making good, disturbed surface in Cement mortar 1:3 complete shall deemed to be included in the quoted rate.
All as per item Ser No 87.00 here-in-before but 25 mm dia complete all as specified and directed.
S&F in repair concealed fancy type stop valve/Angle valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe of 15 mm bore etc complete all as specified and directed.
S&F for 15mm bore brass chromium plated single lever basin mixture without pop up waste system with 450 mm long braided hoses etc complete all as specified and directed.
S&F in repair for 15mm bore brass chromium plated fancy type pillar tap with capesten head screwed down high pressure with or without lettred hot or cold with long screw shank & fly nuts etc complete all as specified and directed.
S&F in repair for 15mm bore brass chromium plated fancy type long body bib cock with wall flange fixed complete all as specified and directed.
S&F in repairs vitreous china, wash down water closet, pedestal pattern white (excluding fixing bolts, flushing cistern and flush pipe) complete but including PVC seat cover with aluminium hinging devices & EWC Jet chromium plated with 1.00 mtr long PVC connection pipe etc complete all as specified and directed.
S&F WC Orissa pattern vitreous china (white) size 580 x 440 mm fixed with all including accessories including integral footrest including taking down old WCs etc complete all as specified and directed.
S&F in repair sensor kit assembly with infrared sensor for detecting movement and battery capable of automatic flushing of water in urinal suitable for sensor type urinal pot of required size for proper functioning complete all as specified and directed.
S&F in repair PVC low level flushing cistern 10 ltr capacity sleek having weight not less than 1.80 KG including PVC bend, supporting brackets and complete accessories white colour complete all as specified and directed.
S&F in repair vitreous china half stall urinals,white, complete including providing and fixing plugs, securing urinals to plugs with and including 60mm long brass screws, fixing flush pipe, CP urinal Spreader fixed to water supply pipe, grating and union for discharge pipe complete all as as specified and as directed.
S&F in repair 10mm thick glass urinal partition of size 450 x900mm complete all as specified and as directed.
S&F in repair coloured oval type wash hand basin of size 550x490mm , waste pipe 32mm dia, coupling etc fixed as in counter slab complete all as specified and as directed.
S&F in repair brass chromium plated toilet Paper Holder with Flap complete all as specified and directed.
S&F in repair grating of size 125 mm CP for outlet of water complete all as specified and as directed.
S&F in repair PVC connection 60 cm long with brass check nuts on both sides suitable for 15 mm bore iron pipe complete all as specified and directed.
S&F in repair PVC connections 15mm bore, 450 mm length with PTMT nuts complete all as specified and as directed.
S&F in repair chromium plated health faucet, Telephonic type, with CP flexible arms and Jet,of approved make, suitable to fixed to 15mm bore CP angle valves, etc complete all as specified and directed.
S&F in repair CP brass bottle trap 32 mm dia including jointing to waste fitting and waste pipe complete all as directed.
S&F in repair Stainless steel towel Rail of size 600 mm with lower hanger fixed to wall complete all as specified and directed.
S&F in repair for 15mm bore brass cromium plated fancy type long body pillar tap (Clinical type) with 200mm long lever handle with capstan head screwed down high pressure with or without lettred hot or cold with long screw shank & fly nuts etc complete all as specified and directed .
S&F in repair chromium plated soap dish fixed to wall with CP brass screws etc complete all as specified and directed.
S&F for Corner shelf 12" made out of 5 to 7 mm thick superior quality glass with CP brackets and railing fixed etc complete all as specified and directed.
S&F in repair Push Button Soap Dispensers with ABS body of capacity 0.80 ltr complete all as specified and directed by Engineer-in-Charge.
S&F looking mirror 5.50 mm thick of superior quality, any size, with approved border design fixed with commercial plywood 6 mm thick or AC board and with teak frame fixed in repair complete all as specified and as directed.
Dismantling of old unservicable PVC water tank of capacity exc 500 ltr but n exc 1000 ltrs and removal from site, complete all as specified and directed.
S&F rotational moulded polythene water storage tank triple layered (Cylindrical vertical withclosed top)hoisted and fixed in position of 1000 ltrs capacity fixed with PVC tank nipples, complete all as specified and directed.
S&F in repair ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia etc complete all as specified and directed.
S&F in repair gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed for 15 mm bore iron pipes complete all as specified and directed.
All as per item No 115.00 above but 20 mm bore.
All as per item No 115.00 above but 40 mm bore.
Dismantling 100 mm bore cast iron soil, waste and vent pipes fixed on walls or laid in floors including fittings and taking out including removing from site complete all as directed.
Dismantling 75 mm bore cast iron soil, waste and vent pipes fixed on walls or laid in floors including fittings and taking out including removing from site complete all as directed.
Providing, fixing, jointing and testing in position of ISI marked UV stablized UPVC pipe size 110mm dia for soil, waste, and vent, Type-B as per IS-13592 suitable for rubber ring joints, including all necessary specials and fittings (Confirming to IS-4735) i.e. bends, tees , junctions (with or without any type doors), reducers, WC connectors, couplers, vents cowels, clamps, rubber rings, clean outs etc, fixing at walls/ceiling/in floor level supproted by clamp & hangers etc in concealed/inside duct/under floor & basement ceiling/external work etc. including chase cutting if required upto 06 storeyed building. Note : Fixng/Laying of pipes shall be carried out through a specialised firm approved by GE
All as per item No 120.00 above but 75 mm dia.
Providing & fixing UPVC Floor / Nahani Trap of self cleansing design with CP jally complete in all respects of size (110x 90mm) complete all as specified and as directed.
All as per item No 122.00 above but 110 x110 mm.
All as per item No 122.00 above but (110mm size) multifloor trap.
Providing & fixing UPVC Gully traps of self cleansing design with CP complete in all respects of size (160x 110mm) Single / double size as per site complete all as specified and as directed.
Cutting chases, pinning in, for brick walls built in cement mortar, making good in cement mortar 1:3 or PCC M-15 (nominal mix) type B-0 (using 12.5 mm graded aggregate) and finish to match with the existing as required for inserting corrugated sheets and concealed water tubing etc cutting exceeding 10 cm girth but not exc. 20 cm complete all as specified and directed.
Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed .
M & L for water proofing treatment to sunken slab portion complete all as specified and as directed in the following operations:- (a) Rendering 15 mm thick in CM 1 : 4 mixed with water proofing compound @ 1% by weight of cement including the cost of water proofing compound (b) After drying of plastered surface, suitable primer such as multiplas primer/ muliplas/cold sticker/ multiplas blow bitumen 85/25 or 90/15 shall be coated on the surface. (c) MULTIPLAS @ 3 Kg/Sqm shall be unrolled over the coated surface (with overlap of 10 cm) and bonded completely to the primed surface. The overlap shall them sealed by the tourch flame. (d) Toping with PLASFAL @ 2 Kg / Sqm. A layer of blown bitumen of 85/25 or 90/15 is applied @ 1.20 Kg/Sqm on MULTIPLAS. Plasfal memberance shall then bonded on top of MULTIPLAS blown bitumen on 85/25 or 90/15 shall be applied @ 1.20 Kg/Sqm on top of plasfal. The above water proofing treatment shall be carried out by a specialised agency as approved by GE upto G+5 floor without any extra cost.
M&L Cement concrete type B2 1:2:4 (40mm crushed stone graded aggregate ) in foundations, filling and mass-concrete in sunken portion and like compelete all as specified and as directed.
S&F Factory made precast heavy duty drain/ manhole covers with MS frame and reinforcement complete all as specified and directed.
M&L for Wiring for light point/fan point/exhaust fan point /wall mounted fan/call bell point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, with modular switch, modular plate suitable GI box and earthing the point with 1.5 sq mm FRLS pvc insulated copper conductor single core cable etc.(Group- A) complete all as specified and as directed.
M&L for Wiring for independent socket point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, with modular switch, modular plate suitable GI box and earthing the point with 1.5 sq mm FRLS pvc insulated copper conductor single core cable etc.(Group- A) complete all as specified and as directed.
S&F 1 module socket 3 pin 5/6 amps GI box alongwith modular base & cover plate for modular socket in recess etc complete.
S&F ceiling rose, surface bakelite 65x50mm three terminals complete all as specified and directed
S&F 5 amps to 32 amps rating 240/415 volts 10ka C curve miniature circuit breaker suitable for inductive load of single pole in the existing MCB DB complete with connections testing and commissioning etc as required.
S&F mirror light surface and wall mounted, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver LED 230 volt 50 Hz, 10 watt complete all as specified and directed
S&F exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and directed
S&F Surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver.trica batten 230 volt, 50 Hz, 22 watt and twin core 1.5 sqmm flexible copper cable for connecting to ceiling rose complete all as specified and directed.
Supply and fix LED bulb 12 Watt complete all as specefied and directed.
S&F LED light 34 W LED surface mounted bakalite panel 2' x 2' luminaire suitable for surface/grid ceiling for low ceiling applications with tube, driver and connecting cable including making electric connection to ceiling rose or connector complete all as specified and directed.
S&F Angle holder, PVC Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.
S&F in replacement TPN DB 4 way with provision of MCCB upto 125 Amps and replastering the damaged area complete all as specified and as directed.
Supply ,installation ,testing & comissioning of AMF panel for 750 KVA DG set, indoor type, 3 phase, 4 wire, 415 Volts, 50 Hz, AC supply floor mounted, made of 2 mm thick CRCA sheet, base channel 75X40X5mm, 1600 amp aluminum bus bar mounted on SMC supports, powder costed siemens gray shade with following components: ACB 1500 Amp , EDO microprocessor - 02 Nos AMF relay microprocessor- 01 Nos Battery Charger 12/24 Volts- 01 Nos Control relay with base-04 Nos MCB SP 6 Amp 10KA - 11 Nos MCB DP 16 Amp 10KA - 01Nos MFM VAF+PF- 01 Nos DC voltmeter 12/24 Volts- 01 Nos DC Amp meter 0-30Amp - 01 Nos Annunciator- 01 Nos Under voltage relay 415 Volts AC for Main-01 Nos Under voltage relay 415 Volts AC for DG set -01 Nos AC timer 230 Volts 02 Nos+2 NC- 01 Nos DC timer 12/24 Volts- 01 Nos-01 Nos Engine start relay 12/24 Volts-01 Nos Auto Manual Switch- 01 Nos Start Stop push button-01 Nos Hooter-01 Nos LED indicating light for mains & DG set (R,Y,B)-06 Nos LED indicating light for mains & DG set ON- 02 Nos LED indicating light for battery charger -01 Nos control relay- 01 Nos
Supply and installation hi wall split units indoor/outdoor of 2 TR capacity complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 of capacity completed all as specified and as directed.
Supply and install hi wall split units indoor / outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with mimimum BEE 5 star rated of capacity 2 TR including electrolyte grade copper tubing including synthetic rubber foam for insulation for refrigerant copper piping complete all as directed. Note- The quoted rate is inclusive of necessary T&P, Rope, Ladder etc with safety equipment for execution of work upto 4 story building complete all as directed.
Supply and install hi wall split units indoor / outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with mimimum BEE 5 star rated of capacity 1.5 TR including electrolyte grade copper tubing including synthetic rubber foam for insulation for refrigerant copper piping complete all as directed. Note- The quoted rate is inclusive of necessary T&P, Rope, Ladder etc with safety equipment for execution of work upto 4 story building complete all as directed.
S&F Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA complete all as specified and as directed.
Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 270 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA complete all as specified and directed.
Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 270 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 4 KVA complete all as specified and directed.
M&L for submain wiring including PVC casing capping/ Conduit and 2 run of 4 Sqmm cable PVC insulated copper conductor multi - stranded FRLS cable drawn through PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour / Caping Casing and its accessaries ISI marked of suitable size concealed in wall / on surface as per site requirement etc with all accessories including 4 Sqmm single core strand copper conductor cable PVC insulated unsheathed for earth continuity connected to common earth dolly complete all as specified .
M&L for wiring for circuit/submain wiring alongwith earth wire with the 2x6 Sqmm and 1x4.00 sqmm sizes of FR is PVC insulated copper conductor, single core cable in surface/concealed as required
S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 32Amps complete all as directed.
S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified.
S&F MCB DB SPN 8 way 230 volts 50 Hzs double door type complete all as directed
S&F IP-43 ,MCB DB 8 way ,double door, with 100 amp rated busbar 240 V, SPN concealed / surface on wall as directed by Engr in charge including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces complete all as specified.
S&F circuit breaker (MCB) SPN 63 Amps current carrying capacity in the DB complete with connection testing and commissioning.
S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and neutral, current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.
S&F refrigerator, electric driven (single phase), capacity 220 Ltr to 225 Ltr of approved make.BEE 3 star rated Direct cool single door with intellegent inverter compressor complete all as specified and directed.
S & F in replacement of electrolyte grade copper tubing of size 1/4" suitable for any type of split type AC complete all as specified and directed.
All as per ser item No. 159.00 here-in-before but size 1/2"complete all as specified and directed.
Supply and installation of AC out door stand on the wall suitable for outdoor unit upto 2 TR including grouting in the wall complete all as specified.
S&F PVC drain pipe in all respect complete with all necessary fitting such as elbow, tee, reducer etc of 25 mm dia complete in all as directed.
S&F synthetic rubber foam for insulation for refrigerant copper piping of size 1/2" internal dia split type AC complete all as specified.
S&F synthetic rubber foam for insulation for refrigerant copper piping of size 1/4" internal dia split type AC complete all as specified and directed.
S&F MCB, SP 20- 32 Amps,10 KA ,230 V, 'C'series complete all as specified.
S&F MCB, SPN, 40 Amps,10 KA ,230 V, 'C'series complete all as specified.
Supply and laying of LT cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 300sqmm 3.5 core including testing complete all as specified and directed.
Excavation in trenches in soft/loose soil not exceeding 1.5m depth not exceeding 1.5m in width over energised LT cables for carrying out brick work for preparation of cable duct including for taking out and relaying of LT cables complete all as specified and as directed.
Excavation in treches in hard/dense soil not exceeding 1.5m depth not exceeding 1.5m in width over energised LT cables for carrying out brick work for preparation of cable duct including for taking out and relaying of LT cables in hard standing surfaces, road cutting etc complete all as specified and as directed.
Returning filling in including spreading levelling watering as well ramming in layers not exceeding 25cm thick as in soft/loose soil complete all as specified and as directed.
Removing surplus soil to a distance not exceeding 50mtr and depositing where directed at a level and not exceeding 1.5mtr above the starting point complete all as specifed and as directed.
Supply & laying dry fine sand for cushioning of underground cable laid in trenches/duct complete all as specified and as directed. Note :- Punnced thickness shall be measured and paid.
M&L for sub class 'B' burnt brick flat across the cable, for protection of cable laid in trenches complete all as specified and directed.
S&F in replacement of 4 pole MCCB, 400Amp, 50Hz, 415V with rupturing cpacity 36KA complete all as specified and directed.
Supply and fix in replacement of 4 Pole MCCB, 630Amp, 50Hz, 415V with rupturing capacity 50KA complete all as specified and directed.
Supply and fix of aluminium thimble of size 300sqmm for terminal end of cable complete all as specified and directed.
V.V CONSTRUCTIONS
m/s Kailash Chander
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .