REPAIR AND MAINTENANC/ PAINTING/PLASTER ETC OF INNER SIDE OF SOS MESS BLOCK AT 72 BN CRPF SUNDERBANI

Amount

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand)

Distemperng with 1st quality acrylic distemper (Ready mix) having VOC content less than 50 grams/litre of approved brand and manufacture to givean even shade : (meke- Dulux/Asian/Berger) Old work (One or more coats).

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead: Of area 3 sq. metres and below

25 mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762 mm x 25 mm or less as per requirement with an average wall thickness of 1 mm (±0.3mm). PVC foam end cap of size 23 x 10 mm are provided on both vertical edges to ensure the overall thickness of 25mm. M.S. tube having dimensions 19 mm x 19 mm and 1.0 mm (±0.1 mm) is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25 mm x 11 mm . Door shutter shall be reinforced with special polymeric reinforcements as per manufacturer’s specification and direction of Engineer-in charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places.

M/s Aditya Enterprises

M/S OSHO DHARA TRADERS

SUSHIL KUMAR