SPECIAL REPAIRS TO PERIMETER FENCING FROM BOUNDARY PILLAR NO 131 TO 134 AT INF LINES JAMNAGAR.

Amount

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed by Engr In Charge.

Dismantling fencing wire mesh any type complete all as specified and directed by Engr In Charge.

Excavation in post holes (or similar holes) in hard/dense soil each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed by Engr In Charge.

Fixing only chain link fencing including line wires, any mesh, size and type of standards, rails straining bolts etc including provision of binding wires complete all as specified and directed by Engr In Charge. Note : -1. MS Flat & MS bar to be measured and paid separately.

Supply only chain link fencing made out of 4 mm dia galvanised iron wire of mesh 75mm x75mm size complete all as specified and directed by Engr In Charge.

S&F in repairs galvanised steel barbed wire 2 stand 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed by Engr In Charge. (each line wire to be measured).

M&L for providing precast reinforced cement concrete( 1:1.5:3)Type A1 using 20 mm graded stone aggregate) in precast post, fencing posts, straining or terminal post, struts etc. for fencing, average sectional area exc 100 and n.exc 250 sqcm, with or without chamfered angles and flat, splayed, rounded or mitred tops as direct and fixed all as specified and directed by Engr In Charge.

Material and Labour for mild steel TMT bars 10mm dia and over cut to length bent to shape required including crancking bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia as in reinforcement of fencing posts, columns, plinth beams in fencing complete all as specified and directed by Engr In Charge.

Material and Labour for mild steel TMT bars but 5mm dia and over up to and including 10mm dia as in stirrups, cut to length, bent to shape required including crancking bending hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or Securing with clips complete all as specified and directed by Engr In Charge.

S&F MS round bars 10mm dia conferming to Fe-410W or Fe-310-0 fixed indipendantly including hooking ends for fixing chain link fencing as in bearing bars and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed by Engr In Charge.

S&F 6 to 12 mm dia, MS bolts (Machine made) of length exc. 10cm but not exc 15cm with one washer and one nut complete all as specified and directed by Engr In Charge.

M&L for preparation of new steel surfaces of any description not exc 10cm width or grith and applying two coats of aluminium paint over a coat of red oxide (Zinc chrome) complete all as specified and directed by Engr In Charge.

M&L PCC 1:3:6 nominal mix type C-2 (Using 40 mm grade aggregate) as in foundations, fillings for embedding chain link fencing complete all as specified and directed by Engr In Charge.

M&L for preparation of new plastered and unplastered or concrete surfaces and applying three coats of white wash complete all as specified and directed by Engr In Charge.

S&F Mild steel works with angle iron, flat iron etc as in posts, struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed by Engr In Charge.

M&L for preparation of new steel surfaces Surfaces of any description, not otherwise described,over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr In Charge.

Quick Building Service

VINUBHAI P. CHANDRA