REPAIRS AND UPKEEP OF FURNITURE OF TRAINING HQ, ITS WORKSHOP CENTRES, SHORE ESTTB, DOCK UNITS UNDER UNDER GE(NB) VISAKHAPATNAM.

Amount

Dismantling and taking out carefully old Unserviceable / Worn – Out and broken components of Wooden and Steel Furniture without damaging the remaining serviceable members, furniture and Supplying and Fixing of the same with new components such as Prelaminated MDF Board, Exterior Grade, One side decorative lamination and other side balancing white conforming to IS – 14857, Plywood BWR Grade conforming to IS – 303, Mild Steel Sections, Iron mongery fittings, Builders Hardware, Tapestry Cloth, Foam, Plastic Cane, Cotton / Nylon Newar etc. and Wood Work made of First Class Hard Wood [Teak Wood], seasoned, free from knots and cracks, wrought finished including tightening the joints, pinning, screwing, nailing, wedging, gluing, providing hinges, polishing / painting the entire article with standard workmanship complete to its original shape and size all as shown on drawings, as specified and as directed for following articles: Note: All furniture items shall be painted / polished only after completing all repairs and renewals etc. All materials to be incorporated in the work shall conform to the latest IS Specification. Anti-termite and anti-bug treatment shall be done before polishing the wooden furniture and rate quoted is deemed to be including the same.

ALMIRAH LARGE WITH SHELF (DRG NO. DB-4116 / FD-109)

Shelf of size 910 x 410 x 20 mm made from teak wood.

Partition of size 1800x410x20 mm made from teak wood

Base frame of size base 1015x450x20 mm made from teak wood

SS handles 100 mm long fitted with SS screws/washer

Sratch the entire wooden surface(both internal and external), fill the uneven surface with wooden putty with emery paper and apply French polish with glossy finish after properly cleaned and smottened the surfaces

ALMIRAH MEDIUM WITH SHELF (DRG NO. DB-3050 / FD-110)

Shelf of size 910 x 410 x 20 mm made from teak wood.

Partition of size 1500x410x20 mm made from teak wood

Base frame of size base 1015x450x20 mm made from teak wood

SS handles 100 mm long fitted with SS screws/washer

Sratch the entire wooden surface(both internal and external), fill the uneven surface with wooden putty with emery paper and apply French polish with glossy finish after properly cleaned and smottened the surfaces

ALMIRAH LARGE 1/2 H X 1/2 S (DRG NO. DB-3951)

Shelf of size 450 x 410 x 20 mm made from teak wood.

Partition of size 1800x410x20 mm made from teak wood

Base frame of size base 1000x450x20 mm made from teak wood

SS handles 100 mm long fitted with SS screws/washer

Sratch the entire wooden surface(both internal and external), fill the uneven surface with wooden putty with emery paper and apply French polish with glossy finish after properly cleaned and smottened the surfaces

ALMIRAH MEDIUM 1/2 H X 1/2 S (DRG NO. DB-3952 / FD-108)

Shelf of size 450 x 410 x 20 mm made from teak wood.

Partition of size 1500x410x20 mm made from teak wood

Base frame of size base 1015x450x20 mm made from teak wood

SS handles 100 mm long fitted with SS screws/washer

Sratch the entire wooden surface(both internal and external), fill the uneven surface with wooden putty with emery paper and apply French polish with glossy finish after properly cleaned and smottened the surfaces

RACK STEEL 4 TIER (2 UNITS) (DRG NO. FD-129)

Shelves made of 1.25 mm made to shape (760 x 915 mm) as shown in drg

GI nut, machine threaded with hexagonal or square or round head fixed with washer and nut to fix the clits

Angular frame made out of 30x30x3 mm thick angle iron of 1905 mm long frame

Side sheet made out 1 mm thick MS sheet of required size (305 x315 mm) to be fitted to angular frame

Back sheet made out of 1 mm thick MS sheet of required size (915x315 mm) fitted to angular frame

TABLE OFFICE STEEL CLERK / SUBORDINATE / OFFICER - TP GODREJ

Top with new Prelaminated MDF of size 1199 x 590 mm with PCPP egding to Table Offce steel Godrej Model T-8 / T-101 or T- 111

Top with new Prelaminated MDF top size 1365 x 680 mm with PCPP egding to Table Offce steel Godrej Model T-9 or T-102

Top with new Prelaminated MDF top size 1665 x 900 mm with PCPP egding to Table Offce steel Godrej Model T-104

Top with new Prelaminated MDF top size 900 x 590 mm with PCPP egding to Table Offce steel Godrej Model T-31 / T-32

Lock of Godrej 4 lever lock to drawer of Table Offce steel Godrej Model T-8 /T-9/T-101/T-102/T-104/T-111/T-31/T-32

PVC handles to Table Offce steel Godrej Model T-8 /T-9/T-101/T-102/T-104/T-111/T-31/T-32

ALMIRAH LARGE STEEL /SMALL STEEL (GLAZED) (DRG NO. FD-104)

6 lever lock (Size 75 x 50 mm) with duplicate Flat key (2 Nos of key) Make Godrej/Harrison/Link/Bharat of existing size fixed with screw/ spot weld to shutter of almirah

3-way Assembly including 6mm thick bars round with necessary fittings of approved quality

Godrej pattern handle 120 mm length with necessary fittings of approved quality

Brass bush of 3 way lock device

New bottom made out of 1mm thick MS sheet made to shape and size (920 X 465 MM) as on drawing and fixing by welding matching with existing almirah with and including two coat of synthetic enamel paint over a coat of red oxide primer .

New legs of Almirah large steel made out of 1.5 mm thick MS sheet size 465 (L) x 100 (H) x 120 (W) and fixed with welding for the bottom portion as per existing size with and including two coat of synthetic enamel paint over a coat of red oxide primer.

New legs of Almirah medium/small steel made out of 1.5 mm thick MS sheet size 440 (L) x 100 (H) x 100 (W) and fixed with welding for the bottom portion as per existing size with and including two coat of synthetic enamel paint over a coat of red oxide primer.

MS hinges or U clips 70 / 75 mm long duly welded and all as specified and directed by Engr-in-Charge.

New shelves made out of 1mm thick MS sheet made to shape and size ( 465 W x 920 L ) on drawing and fixing with cleats, nuts and bolts with and including two coat of synthetic enamel paint over a coat of red oxide primer.

New shelves of Almirah small steel made out of 1mm thick MS sheet made to shape and size ( 440 W x 765 L ) on drawing and fixing with cleats, nuts and bolts with and including two coat of synthetic enamel paint over a coat of red oxide primer.

New Plain glass 5 mm thick of size 920 x 400 mm duly fixed to inside frames of shutter with screws

New Plain glass 5 mm thick of size 625 x 375 mm duly fixed to inside frames of shutter with screws

ALMIRAH STEEL MEDIUM WITH ADJUSTABLE SHELF. (DRG NO. FD-243)

6 lever lock (Size 75 x 50 mm) with duplicate Flat key (2 Nos of key) Make Godrej/Harrison/Link/Bharat of existing size fixed with screw/ spot weld to shutter of almirah

New 3-way Assembly including 6mm thick bars round with necessary fittings of approved quality

New Godrej pattern handle 120 mm length with necessary fittings of approved quality

Brass bush of 3 way lock device

New bottom made out of 1mm thick MS sheet made to shape and size (765 X 440 MM) as on drawing and fixing by welding matching with existing almirah and one coat of synthetic enamel paint over a coat of red oxide primer and all as specified.

New legs made out of 1.5 mm thick MS sheet size 440 (L) x 100 (H) x 100 (W) and fixed with welding for the bottom portion as per existing size and duly painted with two coats of synthetic enamel paint shade over a coat of red /zinc oxide all as specified.

New MS hinges for Almirah steel or U clips 70 / 75 mm long duly welded and all as specified and directed by Engr-in-Charge.

New shelves made out of 1mm thick MS sheet made to shape and size ( 440 W x 765 L ) on drawing and fixing with cleats, nuts and bolts

MS L-clamp made to shape 30x30x3 mm size and fixing with SS screws to join Adjascent shelf and Angular channel inside the almirah

TABLE FOR HAV AND ORS (DRG NO. FD-223)

Legs made of 1st class teak wood of size 60 x 60 at top and 30 x 30 at bottom of long 760 mm

Top rail (long) made of 1st class teak wood of size 900x65x25 mm duly fixed to legs as per drg

Top rail (short) made of 1st class teak wood of size 600x65x25 mm duly fixed to legs as per drg

Top of size 900 x 600 mm made with 18 mm prelaminated MDF exterior grade with and including 4 mm teak wood beading fixed with screws

Bottom stiffner (long) made of 1st class teak wood of size 900x40x25 mm duly fixed to legs as per drg

CHAIR CBA STEEL WITH HAND REST (DRG NO. FD-120)

MS Square pipe of 19 mm size, 16 G (1.6 mm thick) to be fix after cutting off Rusted legs or seat/back rest frames with hack-saw blade and welded duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.

Hand Pad of teak wood of size 300 x 300 x 20 mm made to shape as per drg, duly french polished and fixed with piano hinges as required.

Jointing of worn out MS Sq pipe 19 mm size of leg or frame by Gas welding and appluing red oxide primer at jointed area.

Hand rest of teak wood of size 50x20x255 duly french polished

Remove unserviceable / worn out cane from seat and back with Mat Pattern and supply and fixing new plastic cane of 2 mm wide 0.4 mm thick half-round in white colour, duly polish the existing wooden frames before caning

PVC hard shoe cap, duly removing worn out one

CHAIR STEEL WITH / WITHOUT ARMS CUSHIONED (MODEL CHR 8 / CHR 73 MAKE GODREJ)

Jointing of worn out MS Sq pipe 20 mm size of leg or frame by Gas welding and appluing red oxide primer at jointed area.

M & L to apply spray paint with Syn enamel paint (TA grey / Graphite grey shade) to all Steel frames

Hand rest made with teak wood of size 50x20x255 duly french polished

Remove u/s worn out / faded cushion seat and back and S & F of new Seat and back with cushion covered fitted on 12 mm Ply and cover with black colour leatherite duly fixed with screws to existing frames of chair for model CHR 8 / CHR 73

PVC hard shoe cap, duly removing worn out one

CHAIR STEEL WITHOUT ARMS MODEL CHR 18 / CHR 14 (MAKE GODREJ)

Jointing of worn out MS Sq pipe 20 mm size of leg or frame by Gas welding and appluing red oxide primer at jointed area.

M & L to apply spray paint with Syn enamel paint (TA grey / Graphite grey shade) to all Steel frames

Remove u/s worn out cane from seat/back and cane with Mat Pattern new plastic cane of 2 mm wide 0.4 mm thick half-round in white colour, duly polish the existing wooden frames before caning for MODEL CH-18 / CHR 14

PVC hard shoe cap, duly removing worn out one

CHAIR STEEL WITH ARMS MODEL CHR 7 / CHR 6 (MAKE GODREJ)

Jointing of worn out MS Sq pipe 20 mm size of leg or frame by Gas welding and appluing red oxide primer at jointed area.

M & L to apply spray paint with Syn enamel paint (TA grey / Graphite grey shade) to all Steel frames

Hand rest made with teak wood of size 50x20x255 duly french polished

Remove u/s worn out cane from seat/back and cane with Mat Pattern new plastic cane of 2 mm wide 0.4 mm thick half-round in white colour, duly polish the existing wooden frames before caning for MODEL CHR 7 / CHR 6

PVC hard shoe cap, duly removing worn out one

TABLE OFFICE DESK STEEL MODEL ENTERPRISE RH/LH WITH PEDESTAL UNIT (MAKE GIDREJ)

25 mm thick Prelaminated MDF exterior grade top Panel size 1500 x 900 mm with Colour shade LM 94 Saim teak+brown/ LM 93 Palau teak + White shade with all exposed edges are edge banded with 0.8 thick PVC curve edge banding

Locks 4 lever godrej model for pedestal

M & L to apply spray paint with Syn enamel paint (TA grey / Graphite grey shade) to all Steel frame including pedestal steel box of enterprises model

TABLE COMPUTER MAKE GODREJ MODEL BUDDY / COMPANION

18 mm thick Prelaminated MDF exterior grade top Panel size 900 x 590 mm with Colour Beech / Grey with all exposed edges are edge banded with 0.8 thick PVC curve edge banding for model Buddy Godrej

18 mm thick Prelaminated MDF exterior grade top Panel size 800 X 430 mm with Colour Beech / Saim Teak with all exposed edges are edge banded with 0.8 thick PVC curve edge banding for model Companion C1

18 mm thick Prelaminated MDF exterior grade top Panel size 1230 x 610 mm (oval shape at one end) with Colour Beech / Saim teak with all exposed edges are edge banded with 0.8 thick PVC curve edge banding for model Companion C3

18 mm thick Prelaminated MDF exterior grade top Panel size 1200 x 600 mm with Colour Beech / Saim Teak with all exposed edges are edge banded with 0.8 thick PVC curve edge banding for model Companion C2

18 mm thick Prelaminated MDF exterior grade top Panel size 810 x 810 mm with Colour Beech / Saim teak with all exposed edges are edge banded with 0.8 thick PVC curve edge banding for model Companion C4

18 mm thick Prelaminated MDF exterior grade top Panel size 1100 x 500 mm with Colour Beech / Saim teak with all exposed edges are edge banded with 0.8 thick PVC curve edge banding for model Companion C8

PPCP Key board tray for model Buddy Godrej

18 mm thick Prelaminated MDF exterior grade Mouse pad size 300 x 250 mm with Colour Beech / Grey with all exposed edges are edge banded with 0.8 thick PVC curve edge banding for model Buddy Godrej

Apply spray paint with Syn enamel paint (TA grey / Graphite grey shade) to all Steel frame including front Metallic cover sheet model Buddy

18 mm thick Prelaminated MDF exterior grade Key Board panel size 780 x 300 mm with Colour Beech / Grey with all exposed edges are edge banded with 0.8 thick PVC curve edge banding for model Companion C1 Godrej

18 mm thick Prelaminated MDF exterior grade Key Board panel size 675 X 300 mm with Colour Beech / Grey with all exposed edges are edge banded with 0.8 thick PVC curve edge banding for model Companion C3 Godrej

18 mm thick Prelaminated MDF exterior grade Scanner board panel size 300 X 550 mm with Colour Beech / Grey with all exposed edges are edge banded with 0.8 thick PVC curve edge banding for model Companion C3 Godrej

18 mm thick Prelaminated MDF exterior grade Key Board panel size 750 x 300 mm with Colour Beech / Grey with all exposed edges are edge banded with 0.8 thick PVC curve edge banding for model Companion C2 Godrej

18 mm thick Prelaminated MDF exterior grade Key Board panel size 780 x 350 mm with Colour Beech / Grey with all exposed edges are edge banded with 0.8 thick PVC curve edge banding for model Companion C4 Godrej

18 mm thick Prelaminated MDF exterior grade Key Board panel size 600 x 300 mm with Colour Beech / Grey with all exposed edges are edge banded with 0.8 thick PVC curve edge banding for model Companion C8 Godrej

SS 75 / 100 mm handles for drawer / shutter of model Companion C2 / C8

Powder coated (Ivory shade) soft MS channels of 15 inch (set of two) for Key baord of model Companion C1 / C2 / C3 / C4 / C8

SS channel 15 inch for Key board of model Buddy

Nylon Castor wheels for understructure of model Companion C1/ C2 / C3 / C4 / C8

CHAIR REVOLVING MB OR HB MODEL MELUHA MAKE METHODEX

Super soft PU foam for seat moulded (black colour) with density 32 fixed of size 460 x 460 mm over 12 mm thick commerical hot pressed plywood

Breathable form mesh 460 w x 610 H mm +/- 5% variance for back rest of MB

Breathable form mesh 460 w x 700 H mm +/- 5% variance for back rest of HB

Adjustable PU arm of Armrest having handle out 590 mm / Handle In 460 mm

Push button with spring in lieu of damaged for Arm rest handles

Refixing the worn out powder coated Slege base with new nickel Bolts

Hydraulic rod for pneumatic height adjustment

Twin wheel castor 50/60 dia

CHAIR VISITOR / WRITING MODEL MELUHA MAKE METHODEX

Super soft PU foam for seat moulded (black colour) with density 32 fixed of size 460 x 460 mm over 12 mm thick commerical hot pressed plywood

Breathable form mesh 460 w x 560 H mm +/- 5% variance for back rest

Adjustable PU arm of Armrest having handle out 590 mm / Handle In 460 mm

Push button with spring in lieu of damaged for Arm rest handles

Painting to under structure of the chair with two coats of Black enamel paint over a coat of redoxide zinc chrome primer.

Refixing the worn out powder coated Slege base with new nickel Bolts

Nylon bushed to the under structure U shape legs

CHAIR STEEL WITH DESK MODEL CHR-18B / CH18C MAKE GODREJ

Hand Pad with Prelaminated PLB size 300 x 600 x 20 mm made to shape with PVC beading as per drg and fixed with existing FI plate

FI plate with FI plate of size 180 x 15 x 5 mm thick duly painted with two coats of Black enamel paint over a coat of redoxide zinc chrome primer for Hand board pad

Jointing of worn out MS Sq pipe 20 mm size of leg or frame by Gas welding and appluing red oxide primer at jointed area.

Hand rest made with teak wood of size 50x20x255 duly french polished

Remove u/s worn out cane from seat/back and cane with Mat Pattern new plastic cane of 2 mm wide 0.4 mm thick half-round in white colour, duly polish the existing wooden frames before caning for MODEL CH-18 B

Remove u/s worn out / faded cushion seat/back and S & F of new Seat/back with cushion covered with black colour leatherite duly fixed with screws to existing frames of chair for model CHR-18-C

PVC hard shoe cap, duly removing worn out one

BOOK CASE STEEL (1675H x 840 W x 305D) (FD-90)

SS handles of 100 mm long fixed with srews

Plain glass size 230 x 740 mm of 3 mm thick duly fixed to existing MS frame

MS channel made to shade of 1 mm thick made to shape as gudie rail to inside glass Door frame duly painted

Stopper of size 20 x 10 mm made to shape duly painted

Lock 4 lever with flat type SS key in duplicate Make : Godrej / Harrison / Bharat / Link for door compartments

Bottom frame sheet of 1 mm as per shape and size (120 H X 760 L in MM) thick duly welded and painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer of existing shade to match with item

LOCKER STEEL (DSC) (DRG SD-6210 / FD-113)

CP handles of 100 mm long fixed with srews

Hasp & staple 75x40 of 3 mm thick

Aluminium conduit pipe of 20 mm dia of lengh 380 mm

Aluminium socket fixed to inner sheet as shown in drg to support conduit pipe

Leg made out of 1.5 mm thick MS sheet size 600 (L) x 100 (H) x 100 (W) and fixed with welding for the bottom portion as per existing size and duly painted with two coats of synthetic enamel paint shade over a coat of red /zinc oxide all as specified.

MS hinges or U clips 70 / 75 mm long duly welded and all as specified and directed by Engr-in-Charge.

M& L for Removing dented door / shutter (size 1020 x 380 mm) bringing the item to the original shape and refixing the repaired door shutters with suitable hinges all as specified and directed by Engr-in-Charge.

DESK 4'6" (DRG FD-107)

Rear leg made of 25 mm, 1.6 mm thick MS circular pipe 800 mm long, duly welded and painted

Front leg made of 25 mm, 1.6 mm thick MS circular pipe 740 mm long, duly welded and painted

Side stiffiner made of 25 mm dia, 1.6 mm thick MS circular pipe 430 mm long duly welded and painted

Foot rest made of 25 mm dia, 1.6 mm thick MS circular pipe 1220 mm long duly welded and painted

Hard rubber bush in lieu of worn out

20 mm thick teak wood plank of size 1220 x 530 mm in lieu of worn out one, duly fixed with screws and polished

6 mm OST Plywood at back of the desk top of size 200x1200 mm, duly fixed with screws in lieu of faded

CHAIR REVOLVING HB / MB MAKE GODREJ PCH-7001 / 7000

M & L to remove pressed foam cushion,elastic webbing tape, PVC lipping from seat and back by unscrewing the seat and back from frame of chair carefully. S&F new seat and back made by using 60mm thick 40 density foam sheets,new webbing tape,new PVC lipping duly covered with new tapestry cloth of approved colour and texture of rate not less than 250 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.The seat and back shall also be covered with plastic transparent film all as specified and as directed.

M & L to remove faded tapsetry cloth from seat and back of chair carefully after removing the PVC lipping.S&F new tapestry cloth of approved colour and texture to seat and back of chair along with PVC lipping to restore the chair in original shape ,the rate of cloth shall not be less than 250 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.Complete all as specified and as directed.

M & L to remove old unserviceable arm rest of chair and S&F new arm of same shape and size ,made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed by Engr -in -charge.

M & L to remove unserviceable castor twin wheels and S&F new castor twin wheel suitable for chair revolving godrej.Complete all as directed and shown on drawing.

M & L to remove unserviceable pedestal assembly, S&F new pedestal assembly having five arms with twin wheel castor wheels having wheel base not less than 70 cms.Complete all as directed and shown on drawing.

M & L to remove unserviceable hydraulic gas lift cylinder of chair ,S&F new hydraulic gas lift cylinder to chair.Complete all as directed and shown on drawing.

Painting to all steel portion of chair revolving with one coat of synthetic enamel black paint after cleaning,dusting and scratching the entire metal surface of chair with sand paper ,making surface neat and smooth

M & L to remove faded/worn out leatherite from seat or back of chair HB/MB carefully, S&F new leatherite of required colour to match with texture of seat or back of chair with edging duly machine stiched and fixed to the chair, the rate of tapestry shall not be less than 450 per mtr.

CHAIR WITH DESKLET MAKE GODREJ MODEL NO. PCH-7004

M & L to remove pressed foam cushion,elastic webbing tape, PVC lipping from seat and back by unscrewing the seat and back from frame of chair carefully. S&F new seat and back made by using 60mm thick 40 density foam sheets,new webbing tape,new PVC lipping duly covered with new tapestry cloth of approved colour and texture of rate not less than 250 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.The seat and back shall also be covered with plastic transparent film.Complete all as specified and as directed.

M & L to remove faded tapsetry cloth from seat and back of chair carefully after removing the PVC lipping. S&F new tapestry cloth of approved colour and texture to seat and back of chair along with PVC lipping to restore the chair in original shape ,the rate of cloth shall not be less than 250 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.Complete all as specified and as directed.

M & L to remove UNSV / broken hand board of Chair and S&F with screws new hand board made out of 18mm thick prelaminated MDF board (Size 300 x 550 mm) exterior grade both side laminated with same shade with 4mm teak wood edging all around the hand board.Complete all as directed and shown on drawing.

M & L to remove UNSV desklet from the chairs carefully and S&F new desklet made of 2mm dia wire as per existing shape and dimension. Complete all as directed and shown on drawing.

M & L to Paint steel portion of chair with desklet with one coat of synthetic enamel black paint after cleaning,dusting and scratching the entire metal surface of chair with sand paper ,making surface neat and smooth.Complete all as directed and shown on drawing.

CHAIR WITH ARMS MAKE GODREJ MODEL NO. PCH-7003

M & L to remove the existing pressed /unserviceable foam cushion,elastic webbing tape,PVC lipping from seat and back by unscrewing the seat and back from frame of chair carefully and S&F new seat and back made by using 60mm thick 40 density foam sheets,new webbing tape,new PVC lipping duly covered with new tapestry cloth of approved colour and texture of rate not less than 350 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.The seat and back shall also be covered with plastic transparent film.Complete all as specified and as directed.

M & L to remove faded tapsetry cloth from seat and back of chair carefully after removing the PVC lipping and S&F new tapestry cloth of approved colour and texture to seat and back of chair along with PVC lipping to restore the chair in original shape ,the rate of cloth shall not be less than 250 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.Complete all as specified and as directed.

M & L to remove unserviceable arm rest of chair and S&F new arm of same shape and size ,made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed.

M & L to Paint all steel portion of chair with arms with one coat of synthetic enamel black paint after cleaning,dusting and scratching the entire metal surface of chair with sand paper ,making surface neat and smooth.Complete all as directed and shown on drawing.

CHAIR WITHOUT ARMS MAKE GODREJ MODEL NO. PCH-7004

M & L to remove the existing pressed foam cushion, elastic webbing tape,pVC lipping from seat and back by unscrewing the seat and back from frame of chair carefully. S&F new seat and back made by using 60mm thick 40 density foam sheets,new webbing tape,new PVC lipping duly covered with new tapestry cloth of approved colour and texture of rate not less than 250 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.The seat and back shall also be covered with plastic transparent film.Complete all as specified and as directed.

M & L to remove faded tapsetry cloth from seat and back of chair carefully after removing the PVC lipping.S&F new tapestry cloth of approved colour and texture to seat and back of chair along with PVC lipping to restore the chair in original shape ,the rate of cloth shall not be less than 350 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.Complete all as specified and as directed.

M & L to paint all steel portion of chair without arms with one coat of synthetic enamel black paint after cleaning,dusting and scratching the entire metal surface of chair with sand paper ,making surface neat and smooth.Complete all as directed and shown on drawing.

CHARPOY GI PLYTOP (DRG NO. FD 220R)

M & L to Remove the unserviceable / worn out newar from the existing charpoy GI Pipe

M & L for removing the u/s long rail by loosing existing check nut and elbow and S & F of new 32 mm dia GI Pipe medium grade long rail 1980 mm length (approved brand i.e., TATA/ JINDAL/ BANSAL), duly threaded the ends upto 22 mm size as shown in the drawing and as directed

Removing the u/s short rail and fixing of 32 mm dia GI Pipe medium grade short rail 900 mm length made out of long rail retrived from item No 26.02, duly threaded the ends upto 22 mm size complete irrespective of what is shown in the drawing

Removing existing u/s legs and fixing of leg 440 mm length made out of long rail retrived from item No 26.02 or short rail retrived from item No.26.03, duly provided with MS base plate 6 mm welded & painted twice with black paint

Dismantling u/s 3-way elbow and S & F of new 36 mm dia 3-way elbow (ISI brand), having 32 mm bore for the joints of long/short rails as shown in the drg

Dismantling u/s check nut and S & F of new 6mm thick check nut for the corner joints of long/short rails as shown in the drg

S& F 25 mm square MS Pipe of 1.6 mm thick length 890 mm or Flat Iron 32 mm x 5 mm thick length 890 mm (approved brand : TATA/ SAIL/ JINDAL) duly welded the ends to the long rail at an equal distance as shown in the drg for resting the Ply top and connecting to 32 GI Pipe from underneath rails for better grip while placing the Ply top including two coats of synthetic enamel painting over a coat of red oxide primer after preparation of surface.

Tightening the legs ,junction points of long rail and short rail with pipe wrench ,duly fixing existing check nuts to make the stable from ground level before fixing plytop.

Supply and fixing of 12 mm size BWR Grade Plywood IS: 303 of size 6'.6" x 3' Type A / AA (approved brand i.e., Greenply/Kitply/Century/Sylvan/National/Assam ply/ARCHID) over the Long rails & short rails through drilling holes with 10 in No. Nickel Nut, bolt and washers. The four corner parts of plytop to be made curve shape as directed and also alround edge of Ply should be applied mixture of french chalk powder, shellac & spirit and added colour for smooth finish irrespective of drawing and as directed by Engr-in-charge

FORM WITH OUT BACK / WITH BACK

Seat plank 1525x255x 25 mm in lieu of broken one, duly french polished and fixed with GI Bolt, nut and washer for FD-77

Seat plank 1800 x 255 x 25 mm in lieu of broken one, duly french polished and fixed with GI Bolt, nut and washer for FD-78

Back rest plank 1800x150x25 mm in lieu of broken one, duly french polished and fixed with GI Bolt, nut and washer for FD-78

Dismantled 25 mm MS Sq pipe to be welded to joint one end to leg and seat plank, duly painted the welded portion

Legs of 25 mm square MS pipe with 16 Guage thickness of length 450 mm in lieu of rusted, duly welded and painted with one coat of redoxide primer and 2 coat of enamel paint to match with rest of the item

STEEL TABLE (DRG NO. FD-84(M)

Table top Size 1200 x 600 mm for Table clerk steel 18mm thick MDF (OST) Exterior grade and provide 4mm thick teakwood beading alround the top including polishing.

Table top size 1370 X 760 mm for Table office officer steel of MDF (OST) Exterior grade 18mm thick and provide 4mm thick teakwood beading alround the top including polishing.

M & L to remove u/s Drawer of tables office clk steel / typist steel and S & F new drawer made of 1 MM thick as size shown in drg (460 l X 325 W X 120 H in mm) duly painted with red oxide and 2 coat of OG /Smoke grey paint with spray machine

M & L to remove u/s Drawer and S & F of new one made with 1 mm thick as per size shown in drg (500 L x 325 W x 120 H mm ) for Table office officer steel duly painted with red oxide and 2 coat of OG / smoke grey paint with spray machine

M & L to remove rusted frames from leg base of tables and S & F 25 Sq mm MS pipe 16 Gauge thick as per standard drgs duly welded and painted with Zinc oxide and 2 coat of OG paint

S & F for hard rubber shoes to bottom of steel table's legs in shape as square 25mm.

Locks 4 lever (size 45 x 40 mm) with flat type SS key in duplicate Make : Godrej/Harrison/Bharat/Link for steel tables office clk steel/ officer steel /office typist steel/table 900x600x760mm.

Replace wornout PVC Receased handles (150 x 50 x 20 mm) for drawers of steel tables with new one

Joining the worn out / broken joinsts of table frames in length of 1 cms with Gas welding to stabilise the structure of the item

M & L for preparation of old steel surfaces by scraping with emery paper, cleaning, redusting, making the surfaces smooth and apply putty whereever required and two coat of synthetic enamel paint of approved shade inside and out side with spray machine or hand roller as directed.

Almirah large steel with shelves (DRG NO. FD-351)

Almirah medium steel with Adj shelves (DRG NO. FD-350)

Locker bedside steel (DSC) (DRG NO. SD-6210 / FD-113)

Book case steel (DRG NO. FD-90)

Locker steel 12 units (DRG NO. SK-91)

Locker steel 06 units (DRG NO. FD-127)

Locker steel 04 units (DRG NO. FD-127)

Locker steel 08 units (DRG NO. SK-92)

Rack pigeon hole (DRG NO. FD-106)

Rack steel 1.7 x 1.5 x 0.60 " (DRG NO. SK-84)

Rack steel 1830 x 1905 x 760 (DRG NO. SK-85)

Rack for tarpedo war heads (DRG NO. SK-89)

Rack 6 tier Adj shelf (1905 x 915 x 610 mm) (DRG NO. FD-106)

Rack 3 tier Adj shelf (990 x 915 x 610 mm) (DRG NO. FD-106)

Rack steel Adj shelf (3075 x 900 x 500 mm) (DRG NO. SK-90)

Rack steel size 6'3" x 36' x 18" with 6 shelf (DRG NO. SK-81)

Rack type A (DRG NO. FD-351sk-187)

Stool steel 510 / 600 / 760 mm high (DRG NO. FD-81)

Steel cabinet 78"x36"x19" with 18 No locker (12"x12"x17") (TO-ALLIED)

Steel card index cabinet with 4 drawer (TP-ALLIED)

Stool steel 2' high Model ST-2 Godrej

Stool steel with cushion and foor rest PCH 42C12 Godrej

Stand for fire extingusher MS angle 45x45x5 of 4' high (DRG NO. SK-2)

Rack 4 tier 2 unit (DRG NO. FD-129)

Rack 4 tier 1 unit (DRG NO. FD-129)

Table office steel Model T-8 /T-9/T-101/T-102/T-104/T-111/T-31/T-32 (TP GODREJ)

Almirah large steel Glazed (DRG NO. FD-104)

Almirah medium steel Glazed (DRG NO. FD-104)

Almirah medium steel Adjustable shelf (DRG NO. FD-243)

Chair CB 'A' with hand board steel (DRG NO. FD-120)

Rack Type A (DRG NO. F-8)

Rack type B (DRG NO. F-9)

Rack side 3 / 4 spaces steel (DRG NO. FD-1020 / 1023 / 97(M))

Locker bedside steel (OTM) (DRG NO. FD-1029)

Rack for riffle steel (DRG NO. FD-10)

Dias 4500 x 2100 x 150 (DRG NO. SK-269)

Dias 4500 x 1500 x 300 (DRG NO. SK-270)

Display rack periodical with 20 pegion holes (DRG NO. SK-261)

Display rack periodical with 25 pegion holes (DRG NO. SK-262)

Equipment rack (DRG NO. SK-263)

Hat stand onboard with 24 peg (DRG NO. SK-17)

Key board 36 X 26 mm with double glass door (DRG NO. SK-3)

Key board 80 x 60 cm with glass door (DRG NO. SK-4)

Key board 75 x 60 cm with 30 hooks (DRG NO. SK-5)

Key board 3x2 with glass door (DRG NO. FD-117)

Hat stand with mirror (OTM) (DRG NO. FD-233)

Office honour board 750 x 1200 mm (DRG NO. SK-6)

State Board roll names 1200 x 600 mm (DRG NO. SK-7)

State Board roll names 900 x 600 mm (DRG NO. SK-8)

Stool 610 mm high wooden (DRG NO. F-5)

Stand wash hand (DRG NO. FD-12)

Magazine rack medium (DRG NO. FD-365)

Table 900 x 600 with drawer (DRG NO. FD-283)

Table 900 x 600 without drawer (DRG NO. FD-284)

Table 900 x 900 (DRG NO. FD-291)

Teapoy (DRG NO. FD-232)

Workshop bench 1800 x 900 x 760 mm (DRG NO. FD-145)

Workshop bench 1500 x 900 x 760 mm (DRG NO. FD-145)

Table 1520 x 860 x 760 mm (DRG NO. FD-289)

Table 3050 x 1220 x 760 mm (DRG NO. FD-290)

Book shelf open large wooden (DRG NO. DB-3060)

Book shelf open small wooden (DRG NO. DB-3061)

Board notice 5 x 3 or 5 x 4 (DRG NO. FD-99)

Workshop bench 3300 x 300 (DRG NO. SK-265)

Workshop bench type A (DRG NO. FD-57)

Workshop bench type B (DRG NO. FD-57)

Workshop bench type C (DRG NO. FD-57)

Workshop bench 2 m x 1 m (DRG NO. SK-211)

Workshop bench 2100 x 300 mm (DRG NO. SK-266)

Workshop bench 6'6" x 2'6" x 2'6" (DRG NO. GE(P)/65)

Workshop bench 3 m x 1 m (DRG NO. SK-212)

The following wooden items to be completely french polished by scrapping the old tane shade polish, dirt stains on arms, outer surfaces of the item with emery paper or paper machine. The uneven surfaces to be filled with Bee-wax and then polish with French polish as specified to get the glossy look and as directed.

Table for HAVs and Ors (DRG NO. FD-223)

Form with out back (DRG NO. FD-77)

Form with back (DRG NO. FD-78)

Desk stand lecture (DRG NO. FD-125)

Desk 4' 6" (DRG NO. FD-107)

Board Notice (assorted sizes) (DRG NO. FD-99)

Mahesh Traders (BID ID -3233855)

VINAYAK BUILDTECHS (BID ID -3228153)

SOHAN ENGINEERING ASSOCIATES (BID ID -3223261)

Yash enterprises (BID ID -3228277)