Day to day maintenance of internal electrification, light fittings, fixtures, accessories and petty repairs, roof treatment, periodical services at certain OTM accn at AFS Mandore under GE(AF) No. 2 Jodhpur

Amount

Excavating in trenches n exc 1.50 m in width and n exc 1.50 m in depth for foundation,manholes etc as well as n exc 10 sqm on plan area and getting out in soft/disintegrated rock all as specified and directed.

Removal of exacavated soil in soft & loose soil to a distance exc 250 and n. exc. 500m m and depositing where as directed at a level of 1.5 m above the starting point complete all as specified and directed.

Demolition of unreinforced cement concrete in ground floors and paving n.exc 15cm thickness(below or above ground level) complete all as specified and directed by Engineer-in-Charge.

M & L for PCC 1:4:8 , type D-2, using 40mm graded crushed stone aggregate as in foundation , filling and mass concrete.

M & L for RCC 1:1.5:3, type B-1 (volumatric mix)using 20mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete.

Dismantling structural steel work including doors, gates but excluding framed truss etc.as in girder, purlin, trusses, wind ties or framed work of false ceiling in any position and in any description complete all as specified and directed by the Engineer-in-Charge.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) (Fe-410 Grade E-250) including distance pieces, cleats etc

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment

Dismantling asbestos cement (corrugated / semi corrugated) sheets including ridges as in roof covering all as specified & directed by Engineer-in-Charge.

Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed by Engineer-in-Charge.

M&L for PCC block masonary with solid blocks exc 10 cm in width 1:3:6 Type C1 20 mm graded aggregate and setting in mortar complete .

M&L for Squared rubble stone walling , well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed

Taking down cement or cement lime plaster, any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed by Engineer-in-Charge

M & L 15 mm thick rendering on fair faces of brick walls in CM 1:4 , finished fair & smooth w/o using extra cement.

M & L 15 mm thick rendering on fair faces of brick walls in CM 1:6 , finished fair & smooth w/o using extra cement.

M & L 10 mm thick rendering on fair faces of brick walls in CM 1:3 , finished fair & smooth w/o using extra cement.

M&L for rendering 15 mm thick in CM 1:6 stone masonry surfaces finished even and smooth (without using extra cement).

Dismantling floor, hearth or wall tiling, including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge

M&L for light coloured vitrfifed cermaic tiles 10 mm thick area of each tiles not less than 0.36 sqm in on vertical surfaces such as dados skirting and risers to step set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick renedering in CM 1:4 on stone masonary surfacesas directed by Engineer-in-Charge

M&L for coloured Non Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match thick over cement screed 15mm thick in cement mortor 1:6 laid and jointed complete

M&L for coloured glazed ceramic coloured tiles of size 350x 250x 7mm/450x350x7mm thick on walls/vertical surfaces including 10mm thick rendering in CM 1:4, all as directed.

Chequered cement concrete tiles 20cm x 20cm x 25mm thick with grey cement and no pigment , set, jointed and pointed in neat cement slurry in floors

M & L Non skid parking tiles shade as approved by GE of 300x300x7-8 mm thick, coloured in floor etc set and jointed in neet cement slurry and pointed in coloured cement to match the shade of tiles over 15 mm thick screed bed of CM 1:6 all as directed by Engineer in Charge. complete all as specified and directed by Engineer -in- Charge

M & L glazed wall tile exterior grade tiles shade as approved by GE of 300x 600x10 mm thick, coloured in floor etc set and jointed in neet cement slurry and pointed in coloured cement to match the shade of tiles over 15 mm thick screed bed of CM 1:6 all as directed by Engineer in Charge. complete all as specified and directed by Engineer -in- Charge

M&L for preparing old plastered ceiling/soffits of chajjas surfaces and applying one coat of white wash complete all as specified and directed by Engineer-in-Charge.

M & L for preparation of Old plastered surfaces of walls and applying two coats of white wash complete as spd & directed

M&L for preparation of removing/scrapping down existing surface where ever necessary of old plastered or unplastered surfaces of walls and applying one coat of oil emulsion distemper white or tinted removing existing nails if any nos and filling the disturbed /uneven surface holes /voids to achieve the smooth surface as directed by Engr-in-charge..

M&L for preparation of old plastered and unplastred surfaces of walls and applying two coats of oil emulsion distemper white or tinted including removing existing nails if any nos filling the disturbed surface/holes making good smooth surface complete all as directed .

M&L for preparation of old plastered and unplastred surfaces of walls and applying two coats of weather proof exterior emulsion paint in patterncomplete all as directed .

M & L for preparation of old wooden surfaces of any description , not otherwise described ,over 10 CM width or girth and applying one coats of synthatic enamel paint .

M & L for preparation of old steel surfaces of any description not otherwise described over 10 CM width or girth and applying one coats of synthatic enamel paint.

M&L for preparation of new steel & Iron surface of width or grith exceeding 10cm & applying two coats of synthetic enamel paint of 1st quality complete all as spd & directed.

Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and removing from site complete all as specified and directed by Engineer -in-charge.

S & F for factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struk inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement, as per specifications and drawings given on page No 146 of SSr part-I of 2004 complete.

Taking down steel window/ ventilator of any description and of any type with or without guard bars.

S & F factory made steel windows with side hung shutters including box type hinges with steel handles & steel pag stay complete with glazing bars,dovetailed or welded incl fixing of lugs in PCC (1:2:4) type B-I (using 20mm graded stone aggregate) & making good walls & cills to match the existing complete all as spd & directed.

S&F factory made steel windows with side hung shutters incl. box type hinges with steel handles & steel peg stay (without glazing bars) incl. Fixing of lugs in PCC (1:2:4) type B-1 (using 20mm graded stone aggregated) & making good to walls to match the existing incl. one coat of red oxide primer all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed by Engineer-in-Charge.

M&L for 3mm thick sheet glass ordinary quality and glazing fixed with wooden beads in squares not exc. 0.5 Sqm in each panel complete all specified and as directed by Engineer-in-Charge.

M&L for 3mm thick figured glass pin head type and glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all specified and as directed by Engineer-in-Charge

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; cooler stand; 12 mm sq gaurd bar framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

Taking down Aluminium windows/ventilators of any description and of any type with or without protection of Aluminium window by m.s.guard bars and making good the disturbed portion complete all as specified and directed by Engineer-in-charge.

S & F Powder Coated(thickness or powder coating not less than 50 micron) aluminium anodised doors shutters of aluminium section weighing 0.55 Kg/m including necessary joining cleats glazing clip, ruber neoprane packing, aluminiun handle 02 Nos in shutter, suitable hinge 100 mm long, anodised aluminium snap beading, screw complete all as spd. & dierected

S & F powder coated Aluminium anodised doors frame for doors, window/ventilators with one or more rebates including joining cleats for fixing complete complete all as spd. & dierected Engg. In. Charge.

S & F Powder Coated(thickness or powder coating not less than 50 micron) Aluminium anodised window and ventilators shutters side hung type without sash bars of aluminium section weighing 0.55 Kg/m including necessary joining cleats glazing clip, ruber neoprane packing, anodised aluminiun snap beading, screw anodised aluminium fitting such as peg stays 150mm long (01 Nos), hinge type B-21, 100 mm long (02Nos), suitable hadle and 100 mm long tower bolt, complete all as spd. & dierected.

S & F in repair aluminium grill of any size and shape , weight not less than 2.00 kg per sqm, including all necessary fixing arrangement such as aluminium channels, aluminium screwa etc complete.

M&L 5.5mm thcik sheet glass ordinary quality fixed to aluminim doors with beading and glazing clips complete all as specified and directed by Engineer-in-Charge.

S&F rubber neoprene packing for aluminium door/aluminium window/aluminium partition etc complete all as specified and directed by EIC.

S&F mild steel 4 lever, mortice lock, vertical type, size 100mm complete all as specified and directed by Engineer-in-Charge.

S&F in repair Aluminium alloy, anodised, sliding door bolt 300 mm long with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F in repair Mild steel barrel tower bolts 200 mm long, stove enamelled black, with bright bolt and fixed

S&F in repair Aluminium anodised, barrel tower bolts of extruded section 150 mm long and fixed

S&F in in repair 125 mm size Extruded aluminium alloy handles, fabricated type, anodised all as spd & directed.

S&F in in repair 150 mm size Extruded aluminium alloy handles, fabricated type, anodised all as spd & directed.

S&F in repair mild steel cold rolled medium weight butt hinges 100mm size fixed screws to wooden frames or with welding to steel frames all as specified and directed by Engr-in-charge.

S&F in repair Butt hinges 100mm size, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type B-21

S&F as in repairs Floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified.

S&F in repair mild steel helical door spring 300 mm ordinary rat tail type incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed by Engr-in-charge.

S & F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete.

S&F in repair door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

S&F in repair Galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples.

S & F in repairs 125 mm long mild steel, steel window handle incl nuts & bolts ( all as per sample kept in GE office) complete all as specified and directed by Engineer-in-Charge.

M & L in repair Mild Steel Mortice lock, vertical type, size 100 mm size 100 mm 4 Levers

Supply & fixing in replacement vitreous china wash down water closet pan (pedestal pattern), white, with PVC(SWR) 'P' trap 110/110mm bore, (excluding flushing cistern and flush pipe) including connection to drain and to flushing pipe anti syphonage etc., including plastic water closet seat with cover white closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engineer-in-Charge.

S&F in repairs vitreous china squatting pan Orissa pattern size 580 x 440 mm white with integral foot rests (excl flushing cistern) but including PVC(SWR) 'P' or 'S' trap set in and including concrete filling making good to floor complete all as specified and directed by Engr-in-Charge.

S&F in repairs vitreous china wash basin white flat back size 550 x 400mm size excluding taps, waste chain and plug and porcelain stopper but including brackets and cutting for piinning in ends of brackets or cracking but inclusive of fixing of waste pipe.

S&F in repair 10 litres capacity PVC valveless syphonic action type low level flushing cistern white with inlet incl flush pipe of low or high density of PVC 32mm dia, 90cm long and 15mm stop cock making connection incl ball valve, float, handle including brackets and 32mm dia PVC flush pipe complete all as specified and directed by Engineer-in-Charge.

Taking up or down 15mm bore steel tubing and connections with fittings including cleaning for refixing or removal complete all as specified and directed by Engineer-in-Charge

Taking up or down 20 mm bore steel tubing and connections with fittings including cleaning for refixing or removal complete all as specified and directed by Engineer-in-Charge

S&F water tubing 15mm bore, medium weight ISI marked galvanized with all fittings & fixed to walls, ceiling or laid in floors complete all as spd & directed.

S&F water tubing 20mm bore, medium weight ISI marked galvanized with all fittings & fixed to walls, ceiling or laid in floors complete all as spd & directed.

S&F repair plastic water closet seat, white/ black closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device all as specified and directed by Engr-in-charge.

S&F in repair 15mm bore cast copper alloy, chromium plated bib tap with crutch or butterfly handle screwed down, screwed for iron pipe or brass ferrule

S&F in repair 15mm bore pillar taps cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered HOT or COLD with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed by Engineer-in-Charge.

S & F in repair brass chromium plated shower rose, 125 mm sise with swivel joint complete.

S&F in repair stop valve ,angular type, cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union 15mm dia, ISI marked complete all as spd & directed.

S&F in repair ball brass valves high pressure with polythene float & nut conforming to IS, screwed for iron pipe or brass ferrule 20mm bore complete all as specified and directed

S&F in repair flexible waste pipe for fixing with 32/38/40mm bore waste coupling of kitchen sink, wash basin etc. all as specified and directed by Engr-in-charge.

S&F 15mm bore, 450mm long PVC connection with PTMT nuts at each end

S&F grating doom CP 100mm dia of platedwith waste hole

Taking down eaves gutters and rain water pipe (any size or any pattern) including all fittings, heads, shoes, bends, swan necks etc (measured over all as fixed along the central line over fittings and accessories) complete all as specified and directed by Engineer -in-charge.

PVC (SWR) pipes bore 110 mm single socketed in any length with rubber ring joints fixed to walls

Dismantling of wall and ceiling boards(fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets.

S&F Anodised aluminium snap grid frame work for false ceiling all as specified 605 x 605mm

S&F in repair for 4mm thick E board fibre cement designer ceiling board of Everest make embossed texture of size 595 x595mm fixed with screws to snap grid works in ceiling complete all as specified and directed by Engineer -in-charge

Taking down old existing roof treatment (APP membrane & plaster ) and removing outside MOD and cleaning of roof slab / chajjas sweeping with brooms removing all loose materials debris etc complete all as specified and as directed by Engr-in-charge

M&L for demolitation of cement concrete of any description and in any position not otherwise specifically provided for and complete all as specified.

M&L for 50 mm thick (average) cement concrete type B-1, 1:2:4 (20 mm graded aggregate) in padding over roof complete all as specified and as directed by Engineer-in-Charge.

M&L10 mm thick screed bed with CM 1:4 with water proofing compound @ 3% by weight of cement finish even and smooth surfaces using without extra cement. Water proofing compound shall be measured and paid seperately as directed by Engineer-in-Charge

M/L APP modified membrane minium weighting 3 Kg/Sqm with polyster non woven polyster reinforcement ( weight not less than 150 gms/sqm )shall be laid over one coat of oil based bituminous primer(0.5 Kg/sqm) by torch application method and overlapped by 100 mm in all sides as directed by Engr-in-Charge

Supply only integral water proofing compound ISI marked as directed by Engineer-in-Charge

S&F in repairs internal flushing cistern kit, washer, flushing handles etc.

S&F in repairs brass chromium plated health faucet of 15 mm bore complete all as specified.

S&Fsinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm

Taking down copper/aluminium point wiring for (light, fan, bell, socket power socket etc )complete including fixture and fittings such as switches, sockets lamp holder bracket light fittings tube light fittings, regulators, ceiling rose , mirror light fitting , ceiling light fitting, fancy light fitting , fall ceiling light fitting bell/ buzzer and removing materials to store for keeping in safe custody or for taking credit ( credit for above items should be made as per condition separately) and making good disturbed surfaces of wall floor etc.

M&L Point wiring complete with 1.5 Sqmm single core multi standard copper conductor PVC FLRS insulated unsheathed cable in and incl PVC casing capping / PVC Conduit with accessories existing pressed steel terminal boxes (sunk in wall) including new 3.00 mm thick plastic laminated sheet top cover with 1.50 Sqmm insulated unsheathed PVC covered copper conductor for common earth and connecting to earth dolly for :-

One light point controlled by one one way switch

One fan point controlled by one one way switch

One bell point controlled by one bell push switch

One socket out let 5 Amps on the same board

One socket out 3 pin 5 Amps on the independent board.

All as per item No 98.00 here-in-before but with 2.5 Sq mm single core multi standard copper conductor cable for 6 pin 15 Amps socket out let on independent board.

S&F switch flush type 5 Amp, 240 V single pole one way ISI Marked.

S&F switch socket combination 2 in 1,5 Amps flush type

S&F switch socket combination outlet 6 pin ,6/16 Amps flush type

S&F ceiling rose, 3 Terminal Point/PVC/polycarbonate, isolated body.

S&F lamp holder , PVC /Polycarbonate type with back plate suitable for batten fitting complete with necessary wire connection etc.

S & F in replacement for sheet metal enclosures distribution board where MCB to be used with 200 Amps rated bus bar CL-IP-43 240 V, 8 way single pole & neutral link

All as per itme No 105.00 here-in-before but 12 way 240 V,

All as per item No 105.00 here-in-before but 4 way 240 V,

M&L in replacement for MCB single pole 6-32 Amps, 240 V .

M&L in replacement for MCB single pole & neutral 32 to 63 Amps, 240 V .

M&L in replacement for MCB triple pole & neutral 63 Amps, 240 V

S&F in replacement 20 W LED batten (1.2 m) made of CRCA sheet housing with a PC glossy diffuser and mounting accessories duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 105 lumens per watt and total power consumption not more than 19 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete. Make - Crompton Cat No LCTLN-20-WW or equivalent in Philips/Wipro.

S&F in replacement LED Recessed full it luminaire with glare free uniform illumination with longer life and less maintance wattages in 2 ft x 2 ft not less then 100 lumen /watt complete all as specified and as directed. temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete. Make - Crompton Cat No LCTLRNE -36-FO-CDL or equivalent in Philips/Wipro.

S&F in replacement LED Stud Bulk Head 10 watt fixture perfect interior and exterier application within car parks, walkway, stairwells, carridoors, local authorities and housing accosiation as well as commercial building including connectioncomplete all as specified and directed by Engineer in Charge.

S/F in replacement elect bell AC 230 V single pole ISI Marked.

S&F in replacement sub main wiring with 2 run of 6 Sq mm single core copper conductor cable drawn through in rigid PVC conduit ISI marked with fitting and 6.0 Sq mm single core copper conductor cable for continues earth wire all as directed.

M& L in repairs for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and as directed.

S&F in replacement mirror light fitting LED of 10 Watt 2 feet long complete 230V, 6000k rated CCT energy efficient with automatic ballast pen holders stsrters blocks ,diffusers complete with all accessories including tube internally prewired and including connecting with twin core twisted flexible copper cable complete all as specified and as directed.Make -orient model no-LBLN-10-C /bajaj/crompton.

Supply and fixing in replacement fan electronic regulator 300w step type all as specified and as directed by Engr-in-Charge.

M&L for taking down ceiling fan and refixing the same after repair replacement of unserviceable other parts like clamps, nut, bolt, washer and locking arrangement, rubber reel, flexible wire, canopy, shaft, capacitor etc. testing complete all as specified and directed by Engineer-in Charge .Note:- Replacement of unserviceable other parts like clamps, nut, bolt, washer and locking arrangement, rubber reel, flexible wire, canopy, shaft, capacitor etc. shall be measured & paid for separately.

1200 mm (48") sweep.

1400 mm (56") sweep.

All as per item No. 119.00 here-in-before but exhaust fans of following sizes:-

230 mm (9") sweep

300mm (12") sweep

380/400mm (12") sweep

Supply and fixing Gun metal bush of ceiling fans any type of any sweep including cutting of grooves for fixing of bearing instead of bush any type/any size.

M & L for rewinding of burnt Ceiling fan by opening covers of ceiling fan ,remove the burnt winding ,cleaning the slots and rewinding the fan with super enammeled copper wire of same wire gauge,warnishing after winding all as directed by Engineer-in-charge .

M & L of rewinding of burnt Exhaust fan motor size of 300/400 mm sweep fans by opening covers by unscrewing nuts/screws ,cleaning the slots and rewinding the fan with super enammled copper wire of same wire gauge complete call as directed by Engineer-in-charge .

Supply and fixing ball bearing of 1200 mm (48")/1400mm sweep make: NBC/SKF/National suitable for ceiling fan.

Supply and fixing ball bearing of make: NBC/SKF/National any sweep suitable for exhaust fans/pedestal fans of any make & size.

Supply and fixing aluminum blades of 1200/1400 mm celing fans of complete all as specified and directed.

Supply and fixing oil type condenser of Usha/Bajaj/Unistar Make, 230 volts AC including necessary soldering of capacity 2.5 MFD.

All as per item No.31 above but capacity 4 MFD for exhaust fans/pedestal fans.Make: Jamco/GEC/Crompton

M&L for disconnecting, taking down and refixing the same after repair the geyser of any cap including striping, cutting the existing copper inner tank after welding, brazing and tightening the hold fast ,nuts, bolts, washer etc complete and including making good to disturbed existing surface with plastering all as dircted by Engr-in-Charge

Supply and fixing in replacement heating element of Geysers of 2 KW rating required at site including rubber washers. Make – Theeta/ Recold/Bajaj (ISI Marked)

Supply and fixing in replacement thermostat for the Geyser of 25/50 ltr capacity ISI marked

Supply and fixing in replacement PVC heavy duty hot type connecting pieces nylon braided with brass adopters 600 mm/450 mm long and fixing in position suitable for Geyser of 25/50 Litre capacity

Supply and fixing in replacement copper connection heavy duty hot type connecting with 02 Nos brass adopters and washer of size 600 mm/450 mm long and fixing in position suitable for geyser of 25/50 litre capacity

Supply and fixing in replacement geyser indicator lamp square type/round type

POOJA CONSTRUCTION (BID ID -3090345)

BABU LAL PARIHAR (BID ID -3092909)