Construction of Bus Stop in CMPDI RI-V Colony complex, Bilaspur (C.G.)

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level: 1:4:8 concrete

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level: 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I. plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc.The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified- 2 mm thick flat

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction and of approved size and design/ shape laid in required colour and pattern over and including 50mm thick compacted bed of course sand, filling the joints with coarse sand etc. all complete as per the direction of Engineer-in-charge.

Providing and fixing 12 mm thick frameless toughened glass of approved brand and manufacture, including providing and fixing top & bottom pivot/spring type fixing arrangement and making necessary holes etc. for fixing required fittings, all complete as per direction of Engineer-in-charge.

Providing and fixing Cast Iron benches with the dimension of 0.4m height and area=0.7 * 1.5m . Leg support: Heavy Cast Iron frame. Weight approx. 65kg and above. Patti support=1" x2" tubular pipe support. The painting is to be done by an anti corrosive powder coated paint (Pure polyester powder weeds 60-70 micron thick) Of attractive shade including finishing of grinded area with metallic sealant. The rates are inclusive of cost of all material (sand cement etc.) labour civil works for fixing with cement concrete and anchor bolt, transportation at site

Supplying and fixing Security Cabin having overall dimensions of 6 Feet (Length) x 6 Feet (Width) x 7 Feet (Height). The cabin structure is to be fabricated using 40mm thick Puff Panel framed with 35x5mm angle. The cabin shall be provided with 3 Nos. of windows. The rate shall be inclusive of transportation charges and all complete works as per the direction of the Engineer-in-Charge.