Construction of Housing Dwelling Units for SIDBI at Plot no C-40 , C-82 at Inderpuri, Delhi

Bill of Quantity

Name of Work: Construction of Housing Dwelling Units for SIDBI at Plot no. C-40 & C-82 at Inderpuri, Delhi

S. No. Description DSR Amount Non-DSR Amount Total Amount (DSR+NS)

S. No. Description DSR Amount Non-DSR Amount Total Amount (DSR+NS)

7 Fire Fighting & Fire Alarm 20,42,390.00 6,39,642.00 26,82,032.00

Digitally signed by

CHANDRESH KUMAR

Construction of Housing Dwelling Units for SIDBI at Plot no. C-40 & C-82 at Inderpuri, Delhi

BILL OF QUANTITY

SUB-HEAD- I - CIVIL WORK

S.NO DSR- SUB-HEAD(ITEM WISE) UNIT TOTAL DSR -2023 NS Amount Amount

2023 QTY DSR-2023 (Non-Schedule)

1 A Sub- Head I- Earthwork

1 2.6.1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas cum 2724.95 177.50 483678.60 -

(exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and

disposal of excavated earth, lead up to 50m and for all lift ,as directed by Engineer-in-Charge. All

2 2.10.1.1 Excavating trenches by mechinical / manual means of required width for pipes, cables, etc cum 10.00 215.60 2156.00 -

including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth,

including getting out the excavated soil, and then returning the soil as required, in layers not

exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering,

etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :

All kinds of soil

Pipes, cables etc, not exceeding 80 mm dia.

3 2.22.1 Open timbering over areas including strutting, shoring etc. complete. (Measurements to be taken sqm 115.00 44.85 5157.75 -

of the face area timbered):

Depth not exceeding 1.5 m

4 2.22.2 Open timbering over areas including strutting, shoring etc. complete. (Measurements to be taken sqm 115.00 54.95 6319.25 -

of the face area timbered):

Depth exceeding 1.5 m but not exceeding 3 m

5 2.22.3 Open timbering over areas including strutting, shoring etc. complete. (Measurements to be taken sqm 115.00 71.30 8199.50 -

of the face area timbered):

Depth exceeding 3 m but not exceeding 4.5 m

6 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in cum 1265.62 196.00 248061.01 -

layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and

watering, lead up to 50 m and lift up to 1.5 m.

7 2.26.1 Extra for every additional lift of 1.5 m or part thereof in excavation /banking excavated or cum 2028.12 126.80 257165.09 -

stacked materials. All kinds of soil

8 2.27 Supplying and filling in plinth with sand under floors, including watering, ramming, cum 77.94 2123.75 165525.08 -

consolidating and dressing complete.

9 2.31 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of Sqm 1038.92 17.6 18284.95 -

girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a

distance of 50 m outside the periphery of the area cleared.

10 2.34.1 Supplying chemical emulsion in sealed containers including delivery as specified: litre 107.17 234.75 25157.57 -

Chlorpyriphos/ Lindane emulsifiable concentrate of 20%

11 2.35.2.1 Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres sqm 708.76 53.45 37883.22 -

per linear metre including drilling and plugging holes etc.:

With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration

Sub-Total (Earth Work) 12,57,588.02 -

Sub-Head II - Concrete Work

12 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of

centering and shuttering - All work up to plinth level :

13 4.1.3 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) cum 5.31 7878.50 41818.29 -

14 4.15 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone cum 10.80 7294.70 78782.76 -

aggregate 20 mm nominal size derived from natural sources)

15 4.20.1.1 Providing and laying in position ready mixed or site batched design mix cement concrete for plain cum 90.58 8835.15 800269.89 -

cement concrete work; using coarse aggregate and fine aggregate derived from natural sources,

Portland Pozzolana/Ordinary Portland /Portland Slag cement, admixtures in recommended

proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and

workability without impairing strength; including pumping of concrete to site of laying, curing,

carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction

of the engineer-in-charge; for the following grades of concrete.

Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be

payable separately. In case the cement content in design mix is more than 110% of the minimum

specified cement content, the contractor shall have discretion to either re-design the mix or bear

the cost of extra cement.

All works upto plinth level : Concrete of M10 grade with minimum cement content of 220 kg /cum

16 4.2.3 Providing & laying cement concrete in retaining wall , return walls ( any thickness ) ,including Cum 11.88 9895.20 117554.98 -

attached pillasters,columns peirs, abuttments ,pillars ,posts , struts, buttresses , string or lacing

courses,parapets ,coping , bed blocks , anchor blocks,plain window sills,fillets , sunken

floors,etc.upto floor five level , excluding the cost of centring , shuttering & finishing.1:2:4 ( 1

cement :2 coarse sand :4 stone aggregate20mm nominal size

Sub-Total (Concrete Work) 10,38,425.91 -

Sub-Head- III- RCC Work -

17 5.9 Centering and shuttering including strutting, propping etc. and removal of form for : -

18 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete sqm 439.79 392.15 172462.65 -

19 5.9.2 Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. sqm 1370.46 842.50 1154609.18 -

20 5.9.3 Suspended floors, roofs, landings, balconies and access platform sqm 414.11 927.25 383981.48 -

21 5.9.4 Shelves (Cast in situ) Sqm 86.40 927.25 80114.40 -

22 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers. sqm 2687.04 736.40 1978739.05 -

23 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts sqm 1731.56 961.30 1664548.63 -

CHANDRESH KUMAR

Construction of Housing Dwelling Units for SIDBI at Plot no. C-40 & C-82 at Inderpuri, Delhi

BILL OF QUANTITY

SUB-HEAD- I - CIVIL WORK

S.NO DSR- SUB-HEAD(ITEM WISE) UNIT TOTAL DSR -2023 NS Amount Amount

2023 QTY DSR-2023 (Non-Schedule)

24 5.9.7 Stairs, (excluding landings) except spiral-staircases sqm 117.36 764.95 89774.53 -

25 5.9.14 Extra for shuttering in circular work (20% of respective sqm 583.69 185.45 108245.76 -

centering and shuttering items)

26 5.9.15 Small lintels not exceeding 1.5 m clear span, mouldings as in cornices, window sills, string Sqm 102.59 392.15 40228.71 -

courses, bands, copings, bed plates, anchor blocks and the like.

27 5.9.16.1 Edges of slabs and breaks in floors and walls Under 20 cm wide Rmt 666.90 208.55 139082.00 -

28 5.9.19 Weather shades, chajjas, corbels etc. including edges. Sqm 321.60 951.10 305873.76 -

29 5.9.20 Suspended floors, roofs, landings, balconies and access Sqm 2346.61 1028.40 2413254.73 -

platform with water proof ply 12 mm thick

30 5.22.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position kg 63590.14 107.85 6858196.49 -

and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D

31 5.22A.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position kg 144551.6 107.85 15589887.26 -

and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D

32 5.3 Add for plaster drip course/ groove in plastered surface or moulding to metre 824.2 78.40 64614.14 -

R.C.C. projections.

33 5.3 Reinforced cement concrete work in beams, suspended floors, roofs cum 8.64 11505.50 99407.52 -

having slope up to 15° landings, balconies, shelves, chajjas, lintels,

bands, plain window sills, staircases and spiral stair cases above plinth

level up to floor five level, excluding the cost of centering, shuttering,

finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse

sand(zone-III) derived from natural sources : 3 graded stone aggregate

20 mm nominal size derived from natural sources).

34 NS-1 Providing and laying in position ready mixed design mix cement concrete for reinforced cement -

concrete work (Mass concrete work of Footing, Slab, Retaining wall, Column etc.); using coarse

aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary

Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to

accelerate / retard setting of concrete, to improve durability and workability without impairing

strength; including pumping of concrete to

site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering,

finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of

Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be

payable separately. In case the cement content in design mix is more than 110% of the minimum

specified cement content, the contractor shall have discretion to either re-design the mix or bear

the cost of extra cement. All works above plinth and upto floor V level

35 NS-1.1 All works upto plinth level. Concrete of M25 grade with minimum cement content of 330 kg /cum. cum 602.01 9,700.00 0.00 58,39,499.72

36 NS-1.1 All works above plinth level upto floor V level. Concrete of M25 grade with minimum cement cum 876.36 9,700.00 0.00 85,00,727.50

content of 330 kg /cum.

37 5.33.1.1 Providing and laying in position ready mixed or site batched design mix cement concrete for cum 40.00 9,504.75 380190.00 -

reinforced cement concrete work; using coarse aggregate and fine aggregate derived from

natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in

recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve

durability and workability without impairing strength; including pumping of concrete to site of

laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and

reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.

Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be

payable separately. In case the cement content in design mix is more than 110% of the specified

minimum cement content, the contractor shall have discretion to either re-design the mix or bear

the cost of extra cement.

Concrete of M25 grade with minimum cement content of 330 kg /cum

38 5.33.1.2 Concrete of M30 grade with minimum cement content of 350 kg /cum cum 40.00 9,655.70 386228.00 -

39 5.41.1 Supplying and applying pre tested and approved water based concrete sqm 414.11 69.05 28594.14 -

curing compound to concrete/ masonry surface, all as per manufacturer’s specification and

direction of Engineer-in-charge

Non pigmented wet curing compound

40 5.35 Add for using extra cement in the items of design mix over and above quintal 4561.64 733.50 3345960.01 -

the specified cement content therein

Sub-Head- IV- Brick Work -

41 6.1.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cum 20.00 7,132.50 142650.00 -

foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)

42 6.4.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cum 20.00 9,105.90 182118.00 -

superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6

(1 cement : 6 coarse sand)

43 6.34.2 Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average cum 647.91 8,752.55 5670881.78 -

compressive strength in super structure above plinth level up to floor V level in :Cement mortar

1:6 (1 cement : 6 Coarse sand)

CHANDRESH KUMAR

Construction of Housing Dwelling Units for SIDBI at Plot no. C-40 & C-82 at Inderpuri, Delhi

BILL OF QUANTITY

SUB-HEAD- I - CIVIL WORK

S.NO DSR- SUB-HEAD(ITEM WISE) UNIT TOTAL DSR -2023 NS Amount Amount

2023 QTY DSR-2023 (Non-Schedule)

44 6.45.2 Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average sqm 1400.00 1105.80 1548120.00 -

compressive strength in super structure above plinth level up to floor V level in :Cement mortar

1:6 (1 cement : 6 Coarse sand)

45 NS-2 Providing and fixing chicken wire mesh of 150 mm wide fixed with U nails 150 mm centre to Rmt 1100.00 38.00 0.00 41,800.00

centre before plastering between junctions of column/beam and walls

Sub-Total (Brick Work) 75,43,769.78 41,800.00

Sub-Head- V- Stone work

46 7.32.2 Stone work, plain in copings, cornices, string courses and plinth courses, upto 75 mm thick in cum 3.76 107965.10 405446.06 -

Cement mortar 1:6 (1 cement : 6 coarse sand), including pointing with white cement mortar 1:2

(1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade.White

47 8.2.2.1 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, 0.00 -

machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of

required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4

(1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment,

epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss

finish etc. complete at all levels. Granite stone slab of colour black, cherry/Ruby red or as

approved by Engineer incharge

50 8.4 Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and metre 14.85 568.55 8442.97 -

drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.

51 8.3.2 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine metre 261.60 510.95 133664.52 -

polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-

Charge. Granite work

52 8.5 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen Each 189.67 978.70 185625.14 -

platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary

holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

53 8.9.1.2 Providing & fixing Granite Stone (polished) work for wall lining over 12 mm thick bed of cement Sqm 391.23 3860.00 1510128.50 -

mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in

white cement complete.Granite of any colour and shade

Sub-Total (Stone Work) 31,85,110.13 -

Sub-Head- VII- Wood & PVC work

54 9.1.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, cum 6.54 142949.70 934274.57 -

wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia &

length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood

55 NS-3 Providing and fixing factory made Prelaminated Solid door shutter made of HDHMR Board (High 0.00 -

Density High Moisture Resistance) of BSL(Metallic )grade. ,with prefinished both side laminate

including liping,cutting rebate, fixing over frame with stainless steel butt hinges Rate should

include Door hardware of Stainless steel (316 Grade) Door Knob,Hinges ( 125 mm ),

58 ARCHITETURAL HARDWARES 0.00 -

59 9.71.1 Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless Each 324.00 129.85 42071.40 -

steel screws etc. complete : 125x64x2.50 mm

60 NS-4 Providing and fixing bright finished SS ASI 316 grade tower bolts with necessary screws etc Each 99.00 712.00 0.00 70,488.00

complete .300 x 10mm

61 NS-5 Providing and fixing bright finished SS ASI 316 grade tower bolts with necessary screws etc Each 12.00 1200.00 0.00 14,400.00

complete .600 x 10mm

62 NS-6 Providing and fixing bright finished SS-316 Grade 100 mm mortice latch and lock with 6 levers Nos. 75.00 3060.01 0.00 2,29,500.47

and a pair of lever handles with necessary screws etc. complete (best make of approved quality).

63 NS-7 Providing and fixing SS (304) grade Double door buffer floor door stopper, ISI marked, Each 126.00 386.75 0.00 48,729.87

transparent or dyed to required colour and shade, with necessary screws etc. comple te.Twin

64 NS-8 Providing and fixing Pull Handle- H Type (304 Grade)Back to back over Glass/Wood Door with Each 33.00 5648.00 0.00 1,86,384.00

necessary SS screws of complete as per direction of Engineer in charge 25 mm x450 mm

65 NS-9 Supply & installation of Frameless Glass Partion for Bath shower. The Suspended System held sqm 86.94 7217.42 0.00 6,27,482.64

with Glass connector of SS-316 Grade Steel of approved manufacturer & glass panel should be 12

mm thick clear toughened glass held together . The Glass connector to fixed 3 nos on Floor & 3

nos in side wall with screws all complete to perform as per specification and approved drawings

.The rate shall include all fitting fixers nut bolts, washer. all complete. For the purpose of

payment, actual elevation area of Glass shall be measured.

66 NS-10 Providing and fixing stainless steel grade 316 180 degree door viewer -PC finish. with necessary each 14.00 999.00 0.00 13,986.00

stainless steel screws etc. complete as per the direction of Engineer-In-Charge.

CHANDRESH KUMAR

Construction of Housing Dwelling Units for SIDBI at Plot no. C-40 & C-82 at Inderpuri, Delhi

BILL OF QUANTITY

SUB-HEAD- I - CIVIL WORK

S.NO DSR- SUB-HEAD(ITEM WISE) UNIT TOTAL DSR -2023 NS Amount Amount

2023 QTY DSR-2023 (Non-Schedule)

67 NS-11 Supplying, installation, testing and commissioning of Digital door locks in SS304 corrosion each 12.00 17658.00 0.00 2,11,896.00

free having 5-in-1 Access (Bio+Pin+Card+Key with Wi-Fi in builts) features, low battery

alarm, Auto/Manual/Privacy locking features , fMotice latch etc, compatible for door

thickness of 35 mm - 60 mm

Sub-Total (Wood work & PVC) 976345.97 24,32,440.79

Sub-Head-VII- Steel Work -

68 10.4 Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40 sqm 7.56 6566.20 49640.47 -

x40 x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley,

40x40x6 mm angle and T- iron guide at the top and bottom respectively, including applying a

priming coat of approved steel primer.

69 NS-12 Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of each 177.00 220.65 0.00 39,055.05

internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked

for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3

mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S.

bar bent to shape as per standard drawing.

70 NS-13 Glass Railing System :- Supply of modular Transline Block system at Balcony area of suitable for Rmt 253.38 15714.00 0.00 39,81,613.32

laminated glass ( 6mm + 1.52 PVB + 6mm) supported with structural Aluminium U T6-6005/ 6063-

T6 channel 120X69mm wide in profile in blocks sizes 150mm in intervals and 250 mm blocks at

every glass junctions, with Aluminium cover plates with T6-6063 grade side fixed to RCC with

M10X120mm sleeve Fasteners / mechanical anchors and adjusted to be plum and in-line with all

fixing points with necessary EPDM (Grade IHRD MCR 70) bidding and Packings ( PA 6 -Nylon)

tested and certified as per company norms along with handrail of Dia.43mm aluminium ( T6-

6063) round handrail suitable for 13.52 mm glass thickness. Total railing height up to 1000 mm

from the FFL. Standard finish- Anodised Champagne 20-25 Microns. Must be suitable for Load

Criteria 1.5 -2 Kpa of wind load and 1 KN of live load.

Sub-Total (Steel Work) 49,640.47 40,20,668.37

Sub-Head- VIII- Flooring -

71 11.26 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement sqm 14.28 1948.25 27821.01 -

slurry mixed with pigment to match the shade of the slab, including rubbing and polishing

complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :11.26.1 25 mm thick

72 11.27 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) sqm 2.86 2354.70 6725.02 -

thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed

with pigment to match the shade of the slabs, including rubbing and polishing complete.

73 11.55.1 Providing and laying flamed finish Granite stone flooring in required design and patterns, in sqm 1370.71 3186.70 4368049.52 -

linear as well as curvilinear portions of the building all complete as per the architectural drawings

with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4

coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed

with pigment of matching shade including rubbing, curing and polishing etc. all complete as

specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black,

Cherry Red, Elite Brown, Cat Eye or equivalent.

74 11.56.1 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as Sqm 265.81 4481.30 1191169.87 -

well as curvilinear portions of the building all complete as per the architectural drawings with 18

mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse

sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with

pigment of matching shade including rubbing, curing and polishing etc. all complete as specified

and as directed by the Engineer-in-Charge. Polished Granite stone slab colour of Black,

Cherry/Ruby Red or equivalent

75 NS-14 Providing and fixing Ist quality Ceramic glazed wall tiles of size not less 600 x 1200 mm sqm 1006.70 1700.00 0.00 17,11,381.50

conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all

colours, design & shades as approved by Engineer-in-Charge, in skirting, risers of steps and

dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with

grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of

matching shade complete.

76 11.41A.2 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the sqm 546.48 1728.80 944746.84 -

.3 manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved

brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1

cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the

joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping

diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of

required thickness, leveling system and rubber mallet for placing the tiles gently and easily.:

Glazed vitrified floor tiles polished finish of size of Tile 800 x 800 mm

77 11.41A.2 Glazed vitrified floor tiles polished finish of size of Tile 800 x 1200 mm sqm 392.26 2056.90 806831.37 -

78 11.41A.3 Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 600 x 600 mm sqm 517.11 1464.85 757489.46 -

79 11.46.3 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer ), sqm 98.74 1958.45 193369.52 -

with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all

colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement:

3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with

white cement & matching pigments etc. complete. Size of Tile 800x800 mm

CHANDRESH KUMAR

Construction of Housing Dwelling Units for SIDBI at Plot no. C-40 & C-82 at Inderpuri, Delhi

BILL OF QUANTITY

SUB-HEAD- I - CIVIL WORK

S.NO DSR- SUB-HEAD(ITEM WISE) UNIT TOTAL DSR -2023 NS Amount Amount

2023 QTY DSR-2023 (Non-Schedule)

Sub-Total (Flooring) 82,96,202.62 17,11,381.50

Sub-Head- IX- Roofing

80 12.21.1 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 stone aggregate metre 166.39 305.15 50773.91 -

10 mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as

per standard design In 75x75 mm deep chase

81 12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 Each 16.00 298.25 4772.00 -

cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m

x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat

of neat cement, rounding the edges and making and finishing the outlet complete.

82 12.41.2 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : Rmt 298.40 377.40 112616.16 -

13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for

thermal expansion, (i) Single socketed pipes. 110 mm diameter

83 12.42 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for 0.00 0.00 -

unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with

seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion

84 12.42.3 Single tee with door 110 mm Each 16.00 234.15 3746.40 -

86 12.43.2 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain Each 152.00 371.30 56437.60 -

water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required

length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand)

and making good the wall etc. complete. 110 mm

87 12.44 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and Each 16.00 54.70 875.20 -

weighing not less than 440 grams.

88 12.31.1 12.31 Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling Sqm 162.00 1718.95 278469.90 -

up to a height of 5 m above floor level, over first class kail wood

strips 25x6 mm with 10 mm gap in between and reinforced with

rabbit wire mesh fixed to wooden frame (frame work to be paid

separately): Flat surfaces

89 R.A-12 Providing and fixing at all height Wooden veneer false ceiling of 12 mm thick MR garde Particle Sqm 102.00 7856.00 801312.00 -

board including providing and fixing of frame work made of special sections power pressed from

M.S. sheet and galvanized in accordance with zinc coating 600 as per IS: 277 and consisting of

angle cleats of size 25 mm wide X 15 mm thick with flanges of 22 mm and 37 mm at 1200 mm

centre to centre one flange fixed to the ceiling with dash fastner 12.5 mm dia X 40 mm long with

6 mm dia. Bolts to the angle hangers of 25 X 25 X5 mm of required length, and other end of angle

hanger being fixed with nuts and bolts to 6.1 channels 45 mm X 15 mm X 0.9 mm running at the

rate of 1200 mm centre to centre to which the ceiling section 0.5 mm thick bottom wedge of 80

mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450 mm centre to centre

shall be fixed in a direction perpendicular to 6.1 channel with connecting clips made out of 2.64

mm dia. X 230 mm long 6.1 mm wire at every junction including fixing the gypsum board with

ceiling section and perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30

90 mm long, the

12.59 Providing perimeter

& fixing false of ceiling

ceiling at fixed to wall/partition

all height with the &

including providing help of rawl

fixing plugs at 450made

of framework mm of 0.00 -

special section, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/

sqm (both side inclusive) as per IS : 277 and consisting of angle cleat of size 25mm wide x 1.6mm

thick with flanges of 27mm and 37mm, at 1200mm c/c, one flange fixed to the ceiling with dash

fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle

hangers of 25 x10 x0.50mm of required length with nuts & bolts of required size and other end of

angle hanger fixed with intermediate G.I chanels 45 x15 x 0.90mm running at the spacing of 1200

mm c/c, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of

26 mm each having lips of 10.5mm, at 450mm c/c, shall be fixed in a direction perpendicular to

G.I intermediate channel with connecting clip made out of 2.64mm dia x 230mm long G.I wire at

every junction, including fixing perimeter channels 0.50mm thick 27mm high having flanges of

20mm and 30mm long, the perimeter of ceiling fixed to wall/ partitions with the help of Rawl

Calcium with 25mm

Silicate Board long

madedry wallCalcareous

with screws @ 230mm interval,

& Siliceous including

materials fixing of

reinforced with Sqm 133.00 1572.30 209115.90 -

cellulose fiber manufactured through autoclaving process.

92 12.52 Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true 0.00 -

horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (

galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably

spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum)

sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm

thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to

form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made

of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to

form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of

approved texture in the grid including, required cutting/making, opening for services like

diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended

from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia

12.52.1 GI 50 mm long Lay

Ceiling dashinfasteners, 4 mmedge

plain Tegular GI adjustable rodscolour

Global white with galvanised

tiles of sizebutterfly

mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides

inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum),

including factory painted after bending.

Sub-Total (Roofing) 3112997.82 0.00

Sub-Head-X- Finishing

94 13.4.2 12 mm cement plaster of mix : :6 (1 cement: 6 coarse sand) sqm 6640.71 343.65 2282080.68 -

95 13.5.2 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 sqm 2817.01 395.35 1113704.31 -

96 13.16.1 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) sqm 2760.72 300.45 829457.96 -

97 13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand sqm 10246.67 156.05 1598993.32 -

and manufacturer, over the plastered wall surface to prepare the surface even and smooth

98 13.83.2 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic sqm 769.95 142.80 109949.22 -

Compound ) content less than 50 grams/ litre of approved brand and manufacture, including

applying additional coats wherever required to achieve even shade and colou r Two coats

99 13.85.3 Applying priming coats with primer of approved brand and manufacture, having low VOC sqm 521.95 73.95 38598.39 -

(Volatile Organic Compound ) content With water thinnable cement primer on wall surface

having VOC content less than 50 grams/litre

CHANDRESH KUMAR

Construction of Housing Dwelling Units for SIDBI at Plot no. C-40 & C-82 at Inderpuri, Delhi

BILL OF QUANTITY

SUB-HEAD- I - CIVIL WORK

S.NO DSR- SUB-HEAD(ITEM WISE) UNIT TOTAL DSR -2023 NS Amount Amount

2023 QTY DSR-2023 (Non-Schedule)

100 NS-15 Painting with acrylic emulsion paint of Stucco Marble satin finish and manufacture to give an sqm 6640.71 1148.00 0.00 76,23,537.38

even shade to wall and ceiling etc. applied evenly with roller to give approved matt or stippled

finish complete, including cleaning preparation , putting etc. over coat of cement primer of

surface and coat of approved primer as per manufacturer’s specification:Two or more coats on

new work/and old work including scraping of old paint and disposal of mulba to authorized

dumping grounds.( for old and new work including peeling/removing old paint. ) FOR ROOMS

CEILING, TOILET, KITCHEN & CORRIDOR WALLS/CEILING.make (acro/asian)

101 13.62.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : sqm 553.30 226.25 125183.77 -

Two or more coats on new work

102 13.48.1 Finishing walls with textured exterior paint of required shade : 13.45.1 New work (Two or more sqm 1645.46 223.60 367924.86 -

coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @

Sub-Total (Finishing) 64,65,892.51 76,23,537.38

Sub-Head -XI - Aluminum & UPVC Work

103 9.147.A Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead 0.00 -

free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded

profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for

Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design dully

reinforced with galvanized mild steel section made of required shape & size as per CPWD

Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever

required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum

8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing

frame to finished wall as per IS 1367: Part 1 to 14, plastic packers, plastic caps and necessary

stainless steel screws etc. Profile of frame, sash & multion (if required) shall be mitred cut and

fusion welded /mechanically jointed duly sealed at all comers, including driling of holes for fixing

hardware and drainage of water etc. After fixing frame the gap between frame and adjacent

104 9.147.C1. finished wall shall be filledwithout

Fixed window/ventilator with weather proof silicon sealant

mullion/transom.Using over backer

R1 series rod of(33

with frame approved size

1 x 135 mm & above). (Height upto 0.90 metre)

105 9.147.A4 Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium Sqm 247.37 10993.55 27,19,419.50 -

.1 channel for roller track, wool pile, nylon rollers with SS 304 body. Using R2 series with frame (70

mm & above) x (40 mm & above) & both glazed and fly screen sash (25 mm & above) x (50 mm &

above) with zinc alloy (zamak) powder coated touch locks with hook. (Height upto 1.2 metre)

106 9.147.B1. Two track two panels sliding door with Aluminium channel for roller track, wool pile, zinc alloy Sqm 89.78 8106.30 7,27,743.08 -

1 (zamak) powder coated handle on every panel along with multi-point locking system, adjustable

nylon rollers with SS 304 body. Using R3 series with frame (55 mm & above) x (40 mm & above) &

sash (30 mm & above) x (74 mm & above). (Height upto 2.5 metre).

107 21.3 Providing and fixing glazing in PVC / aluminum door, window, ventilator shutters and partitions - -

etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the

directions of engineerin- charge. (Cost of aluminum snap beading shall be paid in basic item.)

108 21.3.2 With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) sqm 233.15 1505.25 3,50,941.51 -

109 21.3.3 With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) sqm 67.33 1685.40 1,13,480.09 -

110 9.15 Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC sliding window with Each 147.00 115.80 17,022.60 -

necessary screws etc. complete.

111 9.15 Providing and fixing steel roller for uPVC sliding window with necessary screws etc. complete Each 162.00 185.50 30,051.00 -

112 9.135.2 Providing and fixing fly proof stainless steel grade 304 wire gauge, to Each 105.11 1228.00 1,29,077.00 -

windows and clerestory windows using wire gauge with average width

of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all

complete. With 12 mm mild steel U beading

113 NS-16 Providing and fixing 19mm dia Stainless Steel drapery rod in required shade including rings, @ Rmt 228.35 1754.20 - 4,00,562.80

100mm C/C, brackets, finial i.c fixing with necessary SS screws and PVC sleeve etc. complete as

per direction of Engineer in charge.

Sub-Total (Aluminium & UPVC Work) 42,61,421.86 4,00,562.80

Sub-Head-XIII- Water Proofing

114 NS-17 Supplying and installing 1.5 mm composite thick fully bonded weldable HDPE sqm 634.44 1515.60 - 9,61,553.48

membrane conforming to IS 16471:2017 requirements of UG waterproofing

structures, requirements to provide Type A fully bonded protection of UG

waterproofing structures. The membrane shall exhibit 25 years of service life tested and complied

in accordance with EN 13251:2016 durability certification. The membrane should be minimum

2.4 m wide comprising of an HDPE layer and a

pressure sensitive adhesive layer which is covered by a weatherproof protective

layer with lap Joint Strength at overlaps >15000 N/m ASTM D 1876. The membrane shall have

minimum of 100mm side and end laps which shall be thermofused with leister machines at all

the joints for assuring watertightness and achieving monolithic membrane. End laps and side laps

should be a minimum of 100 mm with the weld size of minimum 50 mm in case of a single weld

system. In case of a double weld system, comprising of two parallel welds of 15 mm wide each

with a 20 mm air channel gap in between the two weld lines.The size of the membrane should

not be less than 2.4 Mtr. x 20 Mtr. to minimize the joints. This membrane shall be continued over

the vertical surface but terminated minimum 100mm below the top edge of the raft slab/footings

and fixed as per recommendation. Basic Propoerties are as follows:

1. Thickness of complosite memberane 1.5 mm

2. Tensile strength 25 mpa

3. Elongation 500%

4. Low temperature flexibility -25 Degree

5. Hydrostatic head resistance 70 m

CHANDRESH KUMAR

Construction of Housing Dwelling Units for SIDBI at Plot no. C-40 & C-82 at Inderpuri, Delhi

BILL OF QUANTITY

SUB-HEAD- I - CIVIL WORK

S.NO DSR- SUB-HEAD(ITEM WISE) UNIT TOTAL DSR -2023 NS Amount Amount

2023 QTY DSR-2023 (Non-Schedule)

115 NS-18 Providing & applying 2 components, solvent free, liquid applied elastomeric seamless hybrid sqm 470.89 2500.00 - 11,77,223.75

Polyurea Polyurethane Membrane, using high pressure plural component spray equipment, to

form a minimum system thickness of 1.5 mm in two or more passes with a total consumption of

1.5-1.6 kg / m2. The membrane should have 100% Solids, VOC Free, Tensile strength 15 Mpa as

per ASTM D 412, Elongation 450% as per ASTM D 412, Low temperature Crack bridging ability of

3.2mm as per ASTM C 1305, Shore A Hardness 85 ASTM D 2240, Puncture Resistance 1000 N as

per ASTM E 154, Water Head Resistance 7 Bar as per ASTM D 5385.The coating should pass

Dynamic Crack Bridging as per EN 1062-7, Method B for 20,000 cycles at -20 degree temperature.

The membrane should exhibit 25 years of service life tested and complied in accordance with EN

13251:2016 durability certification. Apply primer coat of epoxy primer by roller/ airless spray

guideline and coverage @ 5-6 m2/ltr depends on porosity

of concrete. Allow to cure for max 5-6 hours. Broadcast anti slip grains of 200-300

micron (dried sand) on wet primer at coverage of 0.8-1 kg/m2 and allow to come to touch dry

condition before application of Membrane.

115 NS-19 Providing and fixing water profing treatment in Bath room/ toilet Providing and applying High sqm 147.42 967.39 - 1,42,613.06

Performance Two Component Acrylic Polymer Modified Cementitious flexible flexible

waterproofing, Dr. Fixit Fastflex having film build up of 1.2mm to 1.5mm with elongation upto

120%. Applying coating in two coats @1.0 kg/ M2/ coat in the time interval of 6-8 hrs. Coating

shall be done on the entire horizontal surface and vertical surface upto 7 ft from FFL adjust walls

of shower. (Rest upto 1ft.) After 2nd coat fine washed sand is sprinkeled on Vertical wall while

the coat is tacky for key to succesive plaster or screed. Note : 1st coat must be applied on damp

(SSD) surface not on dry surface. (Cement, sand, electricity, water and other civil products should

be supplied by civil contractor for free of cost).Water Ponding Test : After 2nd Coat allow these

coating to cure for 7 Days as per curing process given in TDS. Check coating for any damage or

cracks during 7 days of curing. If found repair it. Cure it. Conduct Water Ponding Test.Close all

the outlets properly by suitable means. Fill the water minimum up to 50mm height.Keep this

115 NS-20 water for maximum

Providing & applying48PU

based highthe leakage or dampness

performance on other

waterproofing side. Ifover

treatment No dampness

pure polyurethane based, single component, low VOC, elastomeric, seamless, moisture curing,

waterproof membrane, Dr. Fixit FlexiPU 270(I), applied in 2 coats over After carrying the

necessary preparation with roller at a total consumption of 1.5 Kgs/Sqmt, having specific gravity

of minimum 1.30, having an elongation capacity of over 400%, with tensile strength of >

2.00Mpa, Adhesion to concrete surface over 2.00N/mm2, Shore A Hardness of 75, Fire resistance

EURO Class-F, with Anti-root propertise, with a service temperature range of -40deg C to 80deg C,

with solids content of around 90%, to be applied by brush/roller over the RCC slab and on the

vertical surfaces upto 300mm above FFL, thereafter ponding with water for 3 days etc. complete.

The work shall be carried out all complete as per specification and the direction of the engineer-

in-charge. The product performance shall carry guaranteed for 10 years against any leakage

115 22.14.1 Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand cum 61.94 7510.75 4,65,244.02 -

: 4 graded stone aggregate 20 mm nominal size)

Sub-Total (Water Proofing) 4,65,244.02 68,75,091.53

TERRACE GARDEN -

116 2.2 Supplying and stacking of good earth at site including royalty and carriage up to 1 km cum 254.25 469.50 1,19,371.50 -

(earth measured in stacks will be reduced by 20% for payment).

117 2.4.1 Supplying and stacking at site dump manure from approved source, including carriage cum 190.69 229.95 43,849.00 -

(manure measured in stacks will be reduced by 8% for payment) : Screened through

sieve of I.S. designation 20 mm

118 2.3 Supplying and stacking at site sludge from approved source, including carriage (manure cum 190.69 276.90 52,801.87 -

measured in stacks will be reduced by 8% for payment) :

119 2.8 Spreading of sludge, dump manure or/and good earth in equired thickness (Cost of cum 635.63 46.15 29,334.37 -

sludge, dump manure or/ and good earth to be paid separately).

120 2.9 Mixing earth and sludge and manure in proportion specified or as directed. cum 635.63 32.10 20,403.76 -

121 NS-20 Grassing with Selected type of I grass at Terrace in following stages: sqm 1906.89 423.00 - 8,06,615.74

Stage-1:Providing & Laying of 13 mm thick Light Weight , high strength,Hi -Impact

Polypropylene modular drainage cells which is to be especially designed for sub surface

Drainage and Water Proofing Membrane Protection.

Stage-2 : Providing and Laying of Non -woven Geo Textile 150 gsm over the Drainage

Cells. Stage-3 :Supplying & Laying of Coco-pit Layer ( minimum 20 mm thick )

Stage-4:Grasing with Selected type of grass as approved by the Architect including

watering and maintenance of the Terrace lawn for 30 days or more till the grass forms a

thick lawn free from weeds.

122 2.5 Providing & fixing of White River (Stone) Pables size of 2" to 2.50" dia in natural colour Qtl 10.00 2400 24,000.00 -

at site of work including loading, unloading, carriage and all taxes paid etc.and as per

direction of officer in charge.

Sub-Total (Terrace Garden) 2,89,760.50 8,06,615.74

TOTAL COST(CIVIL WORK) 7,22,26,392.04 3,82,52,325.32

SUB-HEAD- II - SANITARY & WATER SUPPLY WORK

SANITARY FIXTURES

123 17.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat Each 42.00 8006.60 3,36,277.20 -

and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.

brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito

proof coupling of approved municipal design complete, including painting of fittings and

brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI

marked white solid plastic seat and lid

124 17.7A Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of Each 39.00 3960.55 1,54,461.45 -

approved quality and make, including painting of fittings and brackets, cutting and making good

the walls wherever required:-White Vitreous China Wash basin size 550x400 mm with a 15 mm

CP Brass single hole basin mixer

125 17.10.1.1 Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets Each 12.00 6945.60 83,347.20 -

and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making

good the walls wherever required :Kitchen sink with drain board 510x1040 mm bowl depth 250

mm MAKE cera,kohler,xen

126 17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. Each 42.00 349.15 14,664.30 -

triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in -

CP BRASS FITTINGS 0.00 - -

127 17.34.1 Providing and fixing toilet paper holder C.P. brass Each 42.00 803.70 33,755.40 -

CHANDRESH KUMAR

Construction of Housing Dwelling Units for SIDBI at Plot no. C-40 & C-82 at Inderpuri, Delhi

BILL OF QUANTITY

SUB-HEAD- I - CIVIL WORK

S.NO DSR- SUB-HEAD(ITEM WISE) UNIT TOTAL DSR -2023 NS Amount Amount

2023 QTY DSR-2023 (Non-Schedule)

128 18.58.1.1 Providing and fixing PTMT grating of approved quality and colour.Circular type 100 mm nominal each 99.00 37.60 3,722.40 -

dia MAKE cera,kohler,xen

129 18.50.1 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards Each 63.00 820.70 51,704.10 -

and weighing not less than 810 gms.15 mm nominal bore

130 18.53.1 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality Each 84.00 574.30 48,241.20 -

conforming to IS:8931 15mm nominal bore

131 17.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the Each 42.00 1034.80 43,461.60 -

direction of Engineer-in-charge

132 NS-21 Providing and fixing SS AISI-316 Grade Towel rail complete with brackets fixed with CP brass 42.00 2993.00 - 1,25,706.00

screws PVC sleeves etc. Complete: 650 mm long .Model No- SDA-060, of Acquaviva or each

equivalent,,(Make: Kich/Jaquar/Roca/ Cera/Grohe/ Arch/ D-Line)

133 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm,breadth 102mm, height of Each 42.00 111.45 4,680.90 -

75mm with concealed fitting arrangements,weighing not less than 106 gms.

134 17.28.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings Each 12.00 119.55 1,434.60 -

complete.Flexible pipe

135 17.71 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm Each 42.00 168.35 7,070.70 -

distance from wall of standard shape with bracket of the same materials with snap fittings of

approved quality and colour, weighing not less than 105 gms

136 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior nglass (of approved quality) Each 21.00 1607.95 33,766.95 -

complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and

washers complete.

137 NS-22 Providing & fixing cockcroch trap S.S. grating of approved design for floor traps etc. including Each 21.00 715.00 - 15,015.00

setting in floor with cement mortar. 100 mm dia

SOIL & WASTE PIPE & FITTINGS 0.00 - -

138 17.35.1.3 Providing and fixing soil, waste and vent pipes : Hubless centrifugally cast (spun) iron pipes Rmt 497.90 1169.30 5,82,194.47 -

epoxy coated inside & outside IS:15905: 100 mm diameter :

139 17.35.2.3 Providing and fixing soil, waste and vent pipes : Hubless centrifugally cast (spun) iron pipes Rmt 630.70 964.25 6,08,152.48 -

epoxy coated inside & outside IS:15905: 75 mm diameter :

140 17.38 Providing and fixing plain bend of required degree. Hubless centrifugally cast (spun) iron epoxy 0.00 - -

coated inside & outside as per IS:15905

139 17.38.1 Bend of required degree with access door, 0.00 - -

139 17.39 Plain bend of required degree. 0.00 - -

139 Heel rest sanitary bend 0.00 - -

139 17.44.2.2 Providing and fixing single equal plain junction of required degree :75x75x75 mmSand cast iron 0.00 - -

S&S as per IS - 3989

Sub-Total (Sanitary Fixtures) 23,51,805.15 1,40,721.00

WATER SUPPLY -

140 18.22.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :150 mm diameter Each 42.00 222.35 9,338.70 -

141 18.70 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot 0.00 - -

and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing

of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per

direction of Engineer-in-charge

142 Internal work-exposed on wall, including fixing the pipewith clamps at 1.00 meter spacing 0.00 - -

143 18.7.3 25mm nominal outer dia pipes. Rmt 516.50 401.55 2,07,400.58 -

144 18.7.4 32mm nominal outer dia pipes Rmt 517.70 518.75 2,68,556.88 -

145 18.7.5 40mm nominal outer dia pipes. Rmt 173.00 702.95 1,21,610.35 -

146 18.7.6 External work including trenching, refilling etc.50mm nominal outer dia pipes. Rmt 264.00 934.15 2,46,615.60 -

147 18.8.1 Internal work Concealed fixing the pipe with clamps at Metre 1134.50 497.80 5,64,754.10 -

1.00 meter spacing including cutting chases and making good the wall etc.15mm nominal outer

148 18.17 Providing material and labour for fixing gun metal gate valve with C.I. wheel of approved quality 0.00 - -

(screwed end) :

151 18.18.3 Supplying & fixing of 25 mm dia Ball brass valves, high pressure, with polythene float and flynut Each 45.00 464.05 20,882.25 -

complete, screwed for iron pipe or brass ferrule and fixed

152 18.48 Providing material and labour for placing on terrace (at all floor levels) superior qualtity water Ltr 9000.00 16.00 1,44,000.00 -

storage tanks under the brand name SINTEX manufactured using superior quality virgin raw

material with four layer design in approved colours including the ISI variety in black colour. The

four layered thermally insulated water tanks should be designed using the foam layer to minimize

the effects of sunlight & water cool in summers with cover . The rate shall including suitable

locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without

fittings and the base support for tank.

Sub-Total (Water supply) 16,22,494.25 -

EXTERNAL DRAINAGE

153 19.4.2.2 Providing and fixing square-mouth S.W. gully trap grade‘A’ complete with C.I. grating, brick Sqm 19.00 2711.70 51,522.30 -

masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight

of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design

150 x 100 mm size P type With Sewer bricks conforming to IS : 4885

154 19.7.1.1 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with Each 8.00 12770.55 1,02,164.40 -

R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate

20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8

graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar

1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in

cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size)

finished with a floating coat of neat cement complete as per standard design :Inside size 90x80

cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions,

total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of

frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

155 19.60 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff 0.00 - -

mixture of cement mortar in the proportion of 1;2 (1 cement : 2 fine sand) including testing of

joints etc. complete:

CHANDRESH KUMAR

Construction of Housing Dwelling Units for SIDBI at Plot no. C-40 & C-82 at Inderpuri, Delhi

BILL OF QUANTITY

SUB-HEAD- I - CIVIL WORK

S.NO DSR- SUB-HEAD(ITEM WISE) UNIT TOTAL DSR -2023 NS Amount Amount

2023 QTY DSR-2023 (Non-Schedule)

158 19.20 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone 0.00 - -

aggregate 40 mm nominal size) all-round SW/ RCC pipes including bed concrete as per standard

159 19.2.2 150 mm diameter SW/RCC pipe Metre 188.00 1179.85 2,21,811.80 -

160 19.2.4 250 mm diameter SW/RCC pipe Metre 81.00 1590.55 1,28,834.55 -

161 19.27.1 Constructing brick masonry road gully chamber 50X45X60 cm with brick of class designation 75 in Each 12.00 5957.90 71,494.80 -

cement mortar 1:4 (1 cement : 4 coarse sand) including 500*450 mm pre-cast R.C.C. horizontal

grating with frame complete as per standard design: With F.P.S. bricks

162 19.32.1 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with Each 2.00 26861.90 53,723.80 -

bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With

common burnt clay F.P.S. (non modular) bricks of class designation 7.5

163 NS-23 Providing and Fixing FRP Underground Anaerobic Septic Tank CAPACITY (Litres) 10000 ltr model Each 2.00 563155.00 - 11,26,310.00

no.AST-10 Sintex’ Anaerobic Septic Tank (AST Model) made of FRP having capacity 10,000 liter

Supply of Factory made RCC Deadmans ( concrete blocks-to counter buoyancy) Supply of

necessary FRP Straps, Eye bolt, wire rope turn buckle for anchoring the tank including all

conection fitting of main hole sewer line

164 NS-24 Providing and Fixing S Underground water Tank CAPACITY (Litres) 5000 ltr 5000(MOC-LLDP) Each 3.00 112354.17 - 3,37,062.52

model no.UG-WT 500-01 Supply of necessary FRP Straps, Eye bolt, wire rope turn buckle for

anchoring the tank including all conection fitting 5000(MOC-LLDP)

Sub-Total (External Drainage 8,07,048.05 14,63,372.52

TOTAL COST (Plumbing Work) 47,81,347.45 16,04,093.52

165 18.42.3 Boring with 100 mm diameter casing pipe for hand pump / tubewell, in all soils except ordinary meter 57.00 1025.95 58,479.15 -

hard rocks requiring blasting, including removing the casing pipe after the hand pump / tube well

is lowered and tested :Beyond 12 m and up to 18 m depth

166 18.43 Providing and placing in position filters of 40 mm diameter G.I. pipe with brass strainer of meter 57.00 960.30 54,737.10 -

approved quality.

167 NS-25 Providing and erecting ISI marked PVC insulated PVC Shethed Flat flexible Submercible copper meter 116.00 110.00 - 12,760.00

cable approved make of following Size. (b) 3 Core x 2.5 Sq. mm.

168 NS-26 Supplying and erecting Kirloskar 1 HP single Phase 100 mm Borewell Submersible Monobloc Nos 2.00 13475.01 - 26,950.02

Pump, KDS 128+, 1 HP, Single Phase, 210 Volts, Size 32mm X 25mm MOTOR bearing ISI mark and

manufacture as per IS 8034/1989 to give the run for pumpset and motor for two hours and one

year guarantee alongwith ISI certificate including cost of all necessary accessories with starter

and 32 mm dia outlet connection etc. complete. Kirloskar or equivalent

TOTAL COST ( BORE WELL WORK) 1,13,216.25 39,710.02

Total Cost (Borewell) 1,13,216.25 39,710.02

169 NS-27 Description:- Pantry cabinetry lower carcass-upplying, and placing in position of pantry cabinets sqft 1000.00 2948.00 - 29,48,000.00

as per design approved and space avilable. a) Bottom carcass: made of 18mm thick Marine or

equivalent ply with both side pasted with 0.8 mm thick laminate of fabric or jute light colour as

per approval of engineer incharge. Exposed edges to be wrapped with machine glued only edge

banding tape of matching colours. Thickness of tape shall not be less than 0.8 mm with proper

edging and trimming of the corners. Back ply to be made in 6mm thick ply of Marine quality with

the same lining laminate of 0.8 mm thick of same colour and texture as of boxes material. This

ply shall be secured in the box with groove method and no screws are used to fix the ply. All ply

boxes to be fixed with rust proof screws only. No nails shall be used to fix the boxes. Size of

carcass D560x700H. length to be determined as per site. b) Shutters to be made with Merino or

equialent high gloss meister finish or Merino high gloss finish 1 mm thick laminate/ high gloss

acrylic with 2mm thick edge banding tape of same colour as of front colour, with bak laminate to

be matching to carcass shade laminate. Size shall vary as per requirement of design approval. all

shutter to be used with C type profile or j profile matching colour to the cabinet shutters. c) All

drawers hardware shall be innotech type with different uses like crockerey, cutlery, atta rack,

multipurpose drawersm end carrousel brands, G,T,P,T, brands like Hettich, Haffle, Grass, Blum. A

maximum of 10 nos in one pantry unit combined. d) All hinges used shall be auto stop soft

closing hinges for both upper and lower shutters of the approved brands brands like hettich,

Haffle, Grass, Blum. Rates per square feetSink area to be speacially made to 50x50x3mm thick

aluminium frame with 18mm thick WPC board of high density only of approved brand shall be

used to make the box of sink. Garbage bin shall be provided inside sink area. e) Additional 18mm

thick WPC board to be used after all lower boxes or carcasses are fixed in position and screwed

to them with rust free screws. f) Sink area to be specially made to 50*50*3mm thick aluminum

frame with 18 mm thick WPC board of high density only of approved brand shall be used to make

the box of sink. Garbage bin shall be provided inside sink area. Cutting of space for sink, final size

as per engineer incharge. g) Granite/ quartz stone top 16-18mm pasting over WPC, edge

polishing, facia 35mm, colour black galaxy or colours available in quartz as per decor. Rates per

square feet, The Size may be required to be varied per site upto±5%

170 Description:- Pantry Cabinetry Upper carecass-Upper Carcass: storage above cove counter: Shall sqft 580.000 2400.00 13,92,000.00

be made of 18mm thick marine ply with both side pasted with 0.8 mm thick laminate of fabric or

jute light colour as per approval of engineer incharge. Shutters to be made with merino or

equivalent high gloss mister finish or Merino high gloss finish 1mm thick laminate/ high gloss

acrylic with 2mm thick edge banding tape of same colour as of front colour, with back laminate

to be matching to carcass shade laminate. Size shall vary as per requirement of design. Expose

edges to be wrapped with machine glued only edge banding tape of matching colours. All

exposed surface of carcass to be fiished with similar material as of shutters, (Sides). Thickness of

tape shall not be less than 0.8 mm thick of same colour and texture as of boxes material. This ply

shall be secured in the box with groove method and no screws are used to dix the ply. All ply

boxes to be fixed with rust proff screws only. No nails shall be used to fix the boxes. Size of

carcass D305x770H. length to be be determined as per site.

166 NS-28 Supply and Fixing of Factory made wardrobe in HDHMR Boad of thickness 18 mm for carcass and meter 1607.00 2800.00 - 44,99,600.00

25 mm thick for shutter and having 8 mm ply both side laminated with 0.8 mm thick laminate.

Inner side of carcass shall be provided with 1mm thick of fabric or jute light color laminates on

innner side and 1.5m thickness High gloss, Anti scratch Acrylic laminates on all visible side with 2

mm thick macthing colour edge binding tap machine glued. Dept of wardrobe shall be 600 mm

with drawers as per drawings and approved design. Hinges should of soft closing type, sensor

light should be provided. (Refer Technical speficification for detail). Front area of shutter shall be

measured for payment

Total Cost (Borewell) - 88,39,600.00

CHANDRESH KUMAR

Construction of Housing Dwelling Units for SIDBI at Plot no. C-40 & C-82 at Inderpuri, Delhi

BILL OF QUANTITY

SUB-HEAD- II - Electrical Work

S.NO DSR- SUB-HEAD(ITEM WISE) UNIT TOTAL DSR-2022 NS Amount Amount

2023 QTY DSR-2022 (Non-Schedule)

SUB-HEAD-I: CIRCUIT POINT WIRING

Wiring for light point/ fan point/exhaust fan point/call bell point with 1.5

sq. mm FRLS PVC insulated copper conductor single core cable in

1.1) 1.10 surface/recessed medium class PVC conduit, with modular switch,

modular plate, suitable GI box and earthing the point with 1.5 sq. mm.

FRLS PVC insulated copper conductor single core cable etc as required.

a) 1.10.3 Group-C (Primary point ) Point 256.00 1467 375552 -

Wiring for group controlled (looping) light point /fan point / exhaust fan 0 -

point/call bell point (without independent switch etc) with 1.5 sqmm

1.2) 1.55 FRLS PVC insulated copper conductor cable in surface/recessed PVC

conduit and earthing the point with 1.5sqmm FRLS PVC insulated copper

conductor single core cable etc.as required.

a) 1.55.3 Group-C (looping point ) Point 592.00 858 507936 -

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated 31240 -

copper conductor single core cable in surface / recessed medium class

1.3) 1.11 PVC conduit, 2 way modular switch, modular plate, suitable GI box and Point 20.00 1562

earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor

single core cable etc as required.

Supplying and fixing suitable size GI box with modular plate and cover in 81090 -

front on surface or in recess, including providing and fixing 3 pin 5/6

1.4) 1.31 amps modular socket outlet and 5/6 amps modular switch, connection Each 170.00 477

etc. as required. (For light plugs to be used in non residential buildings).

Supplying and fixing suitable size GI box with modular plate and cover in 132436 -

front on surface or in recess, including providing and fixing 6 pin 5/6 &

15/16 amps modular socket outlet and 15/16 amps modular switch,

connection etc. as required.

Supplying & fixing suitable size GI box wih modular plate and cover in 40712 -

front on surface or in recess including providing and fixing 25 A modular

socket outlet and 25 A modular SP MCB, "C" curve including connections,

painting etc. as required.

Wiring for circuit/ submain wiring along with earth wire with the 0 -

1.7) 1.14 following sizes of FRLS PVC insulated copper conductor, single core cable

in surface/ recessed medium class PVC conduit as required

b) 1.14.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire For Light Circuit Point Metre 1,280.00 275 352000 -

c) 1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire For Power Circuit Point Metre 850.00 334 283900 -

4 X 10 sq. mm + 2 X 10 sq. mm earth wire For Submain Wire / Cable of DB 221100 -

CABLE TRAYS AND ACESSERIES :

Supplying and installing following size of perforated pre-painted M.S.

cable trays with perforation not more than 17.5%, in convenient

2.1) 4.1 sections, joined with connectors, suspended from the ceiling with M.S.

suspenders including bolts & nuts, painting suspenders etc as required.

a) 4.1.1 100 mm width X 50 mm depth X 1.6 mm thickness Metre 80.00 543.00 43440 -

b) 4.1.2 150 mm width X 50 mm depth X 1.6 mm thickness Metre 70.00 604.00 42280 -

Supplying and installing following size of perforated pre-painted M.S. 0 -

cable trays bends with perforation not more than 17.5%, joined with

2.2) 4.2 connectors, suspended from the ceiling with M.S. suspenders including

bolts & nuts, painting suspenders etc as required.

a) 4.2.1 100 mm width X 50 mm depth X 1.6 mm thickness Each 80.00 868.00 69440 -

b) 4.2.2 150 mm width X 50 mm depth X 1.6 mm thickness Each 70.00 1,018.00 71260 -

Supplying and installing following size of perforated pre-painted M.S. 0 -

cable trays reducers with perforation not more than 17.5%, joined with

2.3) 4.3 connectors, suspended from the ceiling with M.S. suspenders including

bolts & nuts, painting suspenders etc as required.

a) 4.3.1 100 mm width X 50 mm depth X 1.6 mm thickness Each 80.00 1,003.00 80240 -

b) 4.3.2 150 mm width X 50 mm depth X 1.6 mm thickness Each 70.00 1,186.00 83020 -

Supplying and installing following size of perforated pre-painted M.S. 0 -

cable trays Tee’s with perforation not more than 17.5%, joined with

connectors, suspended from the ceiling with M.S. suspenders including

bolts & nuts, painting suspenders etc as required.

a) 4.4.1 100 mm width X 50 mm depth X 1.6 mm thickness Each 80.00 1,139.00 91120 -

b) 4.4.2 150 mm width X 50 mm depth X 1.6 mm thickness Each 70.00 1,356.00 94920 -

Supplying and installing following size of perforated pre-painted M.S. 0 -

cable trays cross members with perforation not more than 17.5%, joined

2.5) 4.5 with connectors, suspended from the ceiling with M.S. suspenders

including bolts & nuts, painting suspenders etc as required.

a) 4.5.1 100 mm width X 50 mm depth X 1.6 mm thickness Each 80.00 1,003.00 80240 -

b) 4.5.2 150 mm width X 50 mm depth X 1.6 mm thickness Each 70.00 1,186.00 83020 -

EARTHING INSTALLATION

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including 59776 -

5.1) accessories, and providing masonary enclosure with cover plate having

locking arrangement and watering pipe 2.7 metre long etc. (but without

charcoal/ coke and salt ) as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess 9296 -

for connections etc. as required.

Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface 16904 -

for connections etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for 1952 -

connections etc. as required.

CHANDRESH KUMAR

Construction of Housing Dwelling Units for SIDBI at Plot no. C-40 & C-82 at Inderpuri, Delhi

BILL OF QUANTITY

SUB-HEAD- II - Electrical Work

S.NO DSR- SUB-HEAD(ITEM WISE) UNIT TOTAL DSR-2022 NS Amount Amount

2023 QTY DSR-2022 (Non-Schedule)

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop 336 -

5.5) 5.18 earthing along with existing surface/ recessed conduit/submain wiring/ RM 8.00 42.00

cable as required.

DISTRIBUTION BOARDS

Supplying and fixing following way, horizontal type three pole and

neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess,

3.1) 2.4 complete with tinned copper bus bar, neutral bus bar, earth bar, din bar,

interconnections, powder painted including earthing etc. as required.

(But without MCB/RCCB/Isolator)

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, “C” curve, 0 -

miniature circuit breaker suitable for inductive load of following poles in

the existing MCB DB complete with onnections, testing and

commissioning etc. as required.

Supplying and fixing following rating, four pole, (three phase and 0 -

neutral), 415 volts, residual current circuit breaker (RCCB), having a

sensitivity current 30 mA in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 volts, isolator in the 0 -

3.4) 2.13 existing MCB DB complete with connections, testing and commissioning

etc. as required.

Supplying and fixing Single Pole Blanking Plate in the existing MCB DB 20680 -

complete Etc. as required.

CONDUITING WIRING AND CABLING FOR TELEPHONE / TV NETWORK

Supplying and fixing of following sizes of medium class PVC conduit along

with accessories in surface/recess including cutting the wall and making

good the same in case of recessed conduit as required.

Supply, fixing, connecting and testing of elephone/computer/TV modular 0 -

4.2) sockets modular plate anodised MS box and blanking late in

surface/recessed including connectionetc as required.

1.24.6+1 RJ-11 telephone socket two line with shutter 32424 -

1.24.7+1 T.V. CO-axial cable socket outlets of one point 26656 -

c) M . R RJ-45 face plate( computer line) with shutter DN-460 Each 56.00 500 0 28,000.00

Providing, fixing connecting and testing of solder less telephone Tag 0 -

block of following capacity ties as required in suitable size of m.s.

hinged lockable cover box duly painted etc. as required of Krone type.

a) M.R 10 pair Tele Tag Blk Each 2.00 7,500 0 15,000.00

Providing, fixing connecting and testing of solder less Television Junction 0 -

Box of following capacity ties as required in suitable size of m.s. hinged

lockable cover box duly painted etc. as required of Krone type.

a) M.R 2 pair T.V Junction Box. Each 112.00 2800 0 3,13,600.00

Supplying drawing, connecting and testing of 0.61mm dia annealed 0 -

4.5) copper conductor PVC insulated PVC sheathed telephone Wire/cables in

Existing PVC conduit or a racks as required.

a) 1.18.2 2 pair Telephone cable. (0.61sq mm) RM 336.00 38 12768 -

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper 15792 -

4.6) 1.19 conductor PE insulated, shielded with fine tinned copper braid and RM 336.00 47

protected with PVC sheath in the existing surface/ recessed steel/ PVC

conduit as required.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing 22344 -

surface/ recessed steel/ PVC conduit as required.

Supplying and fixing metal box of following sizes (nominal size) on 0 -

4.8) 1.22 surface or in reces with suitable size of phenolic laminated sheet cover in

front including painting etc as required.

Supply, fitting, wiring, testing and commissioning of 40 W 2X2 RECESS 0 -

6.1) MR MOUNTED LED LIGHT all accessories as required . (Wipro Item Model Each - 7200

Number DG24065)

Supply ,fixing , testing and commissioning of 10 W LED CEILING ROUND 0 74,800.00

LIGHT all accessories as required.

Supply ,fixing , testing and commissioning of20 W LED CEILING TUBE 0 1,58,400.00

LIGHT all accessories as required.

Supply ,fixing , testing and commissioning of EXHAUST FAN. all 0 84,000.00

accessories as required.

Supply ,fixing , testing and commissioning of 15W CEILING LIGHT. all 0 8,20,000.00

accessories as required.

Supply ,fixing , testing and commissioning of 12W CFL CEILING LIGHT. all 0 2,20,800.00

accessories as required.

Supply ,fixing , testing and commissioning of MIRROR LIGHT. all 0 34,000.00

accessories as required.

CHANDRESH KUMAR

Construction of Housing Dwelling Units for SIDBI at Plot no. C-40 & C-82 at Inderpuri, Delhi

BILL OF QUANTITY

SUB-HEAD- II - Electrical Work

S.NO DSR- SUB-HEAD(ITEM WISE) UNIT TOTAL DSR-2022 NS Amount Amount

2023 QTY DSR-2022 (Non-Schedule)

Supply ,fixing , testing and commissioning of CEILING FAN (1200MM ) all 0 1,80,000.00

accessories as required.

Supply, installation, testing and commissioning of DVR-20-CH, 0 2,70,000.00

400/480fps display, 400f/480ps recording, H.264, Recording @704x480

Out, 16 Alarm In, 4 Relay Out, Network Port available for Remote View

7.1) M.R S/W with transmission up to 120 IPS @ 352x288 PAL, along with 3 TB Set 2.00 135000

HDD, complete all as specified with 230VAC power supply complete in all

respects as per specifications as per engineer in charge.

Supply, installation, testing and commissioning of High Resolution 32 0 85,000.00

7.2) inch LCD colour TV monitor with on screen adjustment menu, durable 42500

M.R Each 2.00

metal cabinet etc. complete in all respects as per specifications as per

engineer in charge.

Supply, installation, testing and commissioning of IR & IP Based dome 0 3,31,200.00

type indoor coloured fixed camera with of 1/3" CCD,540 TVL, Sensitivity

7.3) M.R @ 30 IRE: Color 0.5Lx/Night Sense 0.18 Lx, AWB / BLC / AGC /Auto Black, Each 46.00 7200

2.6 to 6 mm vari-focal lens Auto Iris, 12VDC/24VAC for indoor

application, complete in all respects as per specifications as per engineer

Supply, drawing, installation, testing and commissioning of Video co-axial 0 27,600.00

7.4) M.R cable RG 11 in the existing surface / recessed steel/PVC conduit as RM 690.00 40

Supply, drawing, installation, testing and commissioning of armoured 0 32,200.00

7.5) M.R video co-axial cable RG 11 including trenching, excavation and backfilling RM 460.00 70

PVC, HDPE PIPES & PVC FLEXIBLE PIPES:: Supply & erection of PVC pipes 0 -

7.6) & HDPE pipes (fire retardant) for wiring purposes including bends,

inspection boxes etc., where necessary including other petty material as

per PWD General Specifications 2010:-

Heavy gauge PVC conduit pipe 20mm dia. (ISI marked 2mm thick) 0 14,720.00

Supply and drawing of following sizes of PVC insulated copper conductor 0 -

7.9) M.R single core FRLS cable in the existing surface / recessed steel/PVC conduit

Supply, drawing, installation, testing and commissioning of PVC insulated 0 22,500.00

and PVC sheathed Instrumentation cable with electrolytic grade annealed

7.10. M.R bare flexible copper conductor shielded cable 2 core 16/0.2mm. cable in RM 300.00 75

the existing surface / recessed PVC/steel conduit as required.

Supply and laying of RG 59/RG 6 tinned copper co-axial cable with 0 10,500.00

7.11. M.R polythene insulation. RG 6 only in case of distance between camera and RM 300.00 35

ELECTRICAL FLOOR PANEL

Supply, installation, testing and commissioning of following M.V. cubicle

type totally enclosed, free standing type, dust, damp and vermin proof,

Distribution Board/Panel complete with busbars, M.V. danger notice

MR plate, interconnections with suitable capacity aluminium leads/ solid

aluminium strips/rods, connection of incoming and outgoing cables with

thimbles, powder coat painted and having following incoming and

outgoing switchgears complete as required.

a.) INCOMER: -

1 No. of 160 Amp 4P MCCB of 35 kA Breaking capacity with On Indicating -

Lamp with 2A SP MCB back-up.

Coloured (Red, Yellow, Blue) phase indicating lamp - 1 set -

(0 - 160 A) CT operated Ammeter with selector switch & 3 nos. CTs ratio -

160/5A ,15VA burden & accuracy class of 1.0 - 1 set

0-500 V Voltmeter with selector switch - 1 set -

b.) BUSBARS: -

200 Amp TPN Aluminium busbars -

c.) OUTGOING: -

8 Nos. 63 Amp DP MCB, with phase indicating lamps. -

2 Nos. 63 Amp DP MCB, SPARE. -

ELECTRICAL METER PANEL describe as above Set 2.00 3,36,300.00 6,72,600.00

CABLES, MAINS AND SUB MAINS

Cable jointing kit for 11 KV (Earthed) grade cable for indoor termination 0 7,00,524.00

cold shrink type joint complete with jointing material and accessories

suitable for 3 core XLPE armoured aluminium conductor cable of size 50

Supplying and making end termination with brass compression gland and

aluminium lugs for following size of PVC insulated and PVC sheathed /

XLPE aluminium conductor cable of 1.1 KV grade as required.

ELECTRICAL FEEDER PILLAR PANEL

8.1) M.R ELECTRICAL FEEDER PILLAR PANEL

CHANDRESH KUMAR

Construction of Housing Dwelling Units for SIDBI at Plot no. C-40 & C-82 at Inderpuri, Delhi

BILL OF QUANTITY

SUB-HEAD- II - Electrical Work

S.NO DSR- SUB-HEAD(ITEM WISE) UNIT TOTAL DSR-2022 NS Amount Amount

2023 QTY DSR-2022 (Non-Schedule)

1 No. 150 Amps FP MCCB with125 A changeover switch with following

VAF digital electronic meter with inbuilt selector switch and 150/5 Amps

suitable VA, CL 1 CTs . -1 Set

Phase indicating light shall be protected by 2 Amps SP MCB's -3 Set

250 Amps TPN Aluminium bars with heat coloured shrinkable insulation

63 Amps FP MCB - 10 No.

40 Amps FP MCB - 02 No.

32 Amps FP MCB - 02 No.

d) 63 Amps FP MCB - 02 No.

40 Amps FP MCB - 01 No.

i. All MCCB's shall be of 25 KA (Ics) breaking capacity.

ii All MCB's shall be of 10 KA breaking capacity.

ELECTRICAL FEEDER PILLAR PANEL described as above Set 2.00 2,35,000.00 0 4,70,000.00

CABLES, MAINS AND SUB MAINS

Supplying & laying of following 1100 volt grade XLPE insulated PVC

sheathed aluminium conductor armoured cables as per specification in

8.1) existing trenches, cable trays, ducts over bed of sand, clamped includes

anchor fastners wall with suitable clamps, saddles fixing bolts including

connecting testing and commissioning.

a.) M.R 3.5 core 70 sq. mm For External Lighting Panel RM 700.00 720.00 0 5,04,000.00

Supplying and making end termination with brass compression gland and

aluminium lugs for following size of PVC insulated and PVC sheathed /

XLPE aluminium conductor cable of 1.1 KV grade as required.

MAIN LT PANEL & MAIN DISTRIBUTION PANEL

Design, fabrication, assembling, wiring, testing, supply, forwarding to

site, unloading, shifting to location, inspection, installation, testing and

commissioning of DG & Transformer Changeover Panel cum Main LT

Panel, Main distribution panels/ sub-distribution panels and capacitor

panel, fabricated out of 14 gauge CRCA sheet steel in cubicle formation,

compartmentalized, from 3b consutruction, free standing floor mounted,

dust and vermin proof with reinforcement of suitable size angle iron,

channel, `T’ sections and/ or flats wherever necessary. 16 gauge CRCA

sheet steel shall be used for final distribution panels. 3 mm thick cable

gland plates shall be provided on top as well as at the bottom of the

panels. Panels shall be treated with all anticorrosive process before

powder coating as per specifications and final approved shade. 2 No.

earthing terminals shall be provided for all distrtibution panels. Panels

shall be suitable for 415V, 3 phase, 4 wire, 50 HZ supply system. Lifting

hooks shall also be provided in case of large panels. Approval shall be

taken for each panel in the form of shop drawings before fabrication.

Galvanised hardwares with zinc passivation shall be used in fabrication of

DG & TRANSFORMER CHANGEOVER CUM MIAN LT PANEL.

a) DG Incoming Air Circuit Breaker from 62.5 kVA DG set - 1

250 amps 4 pole electrically operated manually draw out type Moulded

circuit breaker with microprocessor release unit , for short circuit, over

current and earth fault protection with adjustable setting as per

specification and with following accessories :

i. Digital energy meter with Maximum demand indicator (conzerve – EM

6400 or equivalent) of accuracy class-I, with 3 Nos. 250/5 amps 15VA

ii. Phase sequence relay shall be protected by 2 Amps TP MCB - 1 Set

iii. Phase indicating light shall be protected by 2 Amps MCB’s. - 3 Sets

iv. Battery charger with voltmeter of range 0-50 volts and ammeter of range

0-50 amps for trickle and boost charging.

v. Breaker ON / OFF / TRIP indicating lights with control MCB’s. - 1 Set

vi 24 V DC Shunt trip coil. - 1 Set

vii 240 V under voltage release. - 1 Set

viii. Breaker control switch - 1 Set

ix Excitor field DC voltmeter and ammeter.

x. Emergency stop push button.

xi. Selector switch for Auto / Manual / Test

xii. Selector switch for engine control OFF/ON.

xiii. Five push buttons – start, stop, reset, test and accept.

xiv. Three indicating lamps “load on set’, ‘Load on Mains’ and “ Set fail to

xv. 12 Window alarm annunciators panel with hooter, push buttons, aux.

Contactors etc as required as per specification.

xvi. Suitable rating battery charger as per specifications

CHANDRESH KUMAR

Construction of Housing Dwelling Units for SIDBI at Plot no. C-40 & C-82 at Inderpuri, Delhi

BILL OF QUANTITY

SUB-HEAD- II - Electrical Work

S.NO DSR- SUB-HEAD(ITEM WISE) UNIT TOTAL DSR-2022 NS Amount Amount

2023 QTY DSR-2022 (Non-Schedule)

xvii. Temperature scanner (Messi Bus/Procon)

xviii. Auxiliary contacts required for necessary interlocking of breakers.

b) Incoming Air Circuit Breaker from 50 kVA Transformer-1

250 amps 4 pole electrically operated manually draw out type Moudule

circuit breaker with microprocessor release unit, for short circuit, over

current and earth fault protection with adjustable setting as per

specification and with following accessories :

Digital load manager (conzerve – EM 6400 with RS-485 or equivalent) of

accuracy class-I with 2 No. 250/5 amps 15VA CTs.

Phase indicating light shall be protected by 2 amps MCB’s- 3 Set

Three Phase Under voltage relay (27) - 1 Set

Three Phase Over voltage relay (59) - 1 Set

Breaker ON/ OFF/ TRIP indicating lights with control MCB’s- 1 Set

24 V DC Shunt trip coil. - 1 Set

240 V AC under voltage release. - 1 Set

Auto-manual / test selector / switch - 1 Set

Breaker control switch - 1 Set

Auxiliary contacts required for necessary interlocking of breakers.

Three phase Voltage sensor relay shall be protected by 2 amps TP MCB’s,

Transient voltage surge supressor with suitable contactor shall be

protected by 2 amps TP MCB’s. - 1 Set

Digital voltmeter with inbuilt selector switch- 1 set

500 A TPN electrolytic Al bus bar with heat shrinkable insulation sleeve

250 Amps 4 Pole MCCB - 6 No.

200 Amps 4 Pole MCCB - 7 No.

150 Amps 4 Pole MCCB - 5 No.

100 Amps 4 Pole MCCB - 6 No.

63 Amps 4 Pole MCCB - 5 No.

150 Amps 4 Pole MCCB - 3No. Spare

100 Amps 4 Pole MCCB - 2 No. Spare

e) Bus Coupler

500 amps 4 pole ACB, with ON/ OFF/ TRIP indicating lamps with

microprocessor release unit, etc complete as per specs.

All outgoing feeders shall have suitable range of followings:

i. All breakers shall be electrically interlocked as per schematic diagram.

ii. All ACB’s/ MCCB’s shall be suitable for 35 KA breaking capacity.

iii. PLC for load management and supervision.

v. Three phase indicating lamps shall be protected by 6 amps SP MCBs.

vi. 1 No. 1000/800/ 5, 15 VA dual ratio CT’s shall be provided for APFCR on

transformer's incomer.

vii. All outgoing feeders shall be provided with built-in short circuit & earth

fault relay module.

viii. All outgoing shall have dual Electronic energy meter (EM-6438 with RS-

485 or equivalent) with required number of CT's.

ix. Wiring and supply, installation of space heater, humidistat and control

MCB’s shall be provided for all vertical sections.

x. Suitable danger board shall be provided.

xi. All bus bar section/ backside panels shall have pad locking facility and

hinged type door.

xii. 9 W fitting with CFL lamp, switch shall be provided in each vertical

xiii. Incoming breakers shall have suitable provision for busduct connection..

xiv All Electronic Energy meter shall be pre wired for BMS connection upto

central point within the panel with sheilded cable.

M. R DG & Transformer Changeover Panel as described above. Set 2.00 9,43,000.00 0 18,86,000.00

5.2) M.R WATER SUPPLY PANEL

1 No. 150 Amps TPN MCCB with125 A changeover switch with following

VAF digital electronic meter with inbuilt selector switch and 150/5 Amps

suitable VA, CL 1 CTs . -1 Set

Phase indicating light shall be protected by 2 Amps SP MCB's -3 Set

250 Amps TPN Aluminium bars with heat coloured shrinkable insulation

32 Amps TP MCB - 2 No.

25 Amps TP MCB - 6 No.

20 Amps TP MCB - 2 No.

20 Amps FP MCB - 1 No.

3 Amps 4P MCB - 3 No.

i. All MCCB's shall be of 25 KA (Ics) breaking capacity.

ii All MCB's shall be of 10 KA breaking capacity.

WATER SUPPLY PANEL described as above Set 2.00 3,26,818.00 0 6,53,636.00

5.3) M.R FEEDER PILLAR PANEL FOR EXTERNAL LIGHTING.

CHANDRESH KUMAR

Construction of Housing Dwelling Units for SIDBI at Plot no. C-40 & C-82 at Inderpuri, Delhi

BILL OF QUANTITY

SUB-HEAD- II - Electrical Work

S.NO DSR- SUB-HEAD(ITEM WISE) UNIT TOTAL DSR-2022 NS Amount Amount

2023 QTY DSR-2022 (Non-Schedule)

Supply, installation, testing and commissioning of cubicle type totally

enclosed free standing, dust free, damp and vermin proof and water

proof outdoor (IP 55) Feeder pillar fabricated out of 2mm thick CRCA

sheet duly powder coated and including supply & fixing the following

items and interconnections, wiring with suitable size wires/ cables and

including all civil works like excavation, PCC, brick work pedestal,

plastering, refilling etc. and as per specifications as required.

1 No. 200 Amp four pole Moulded Case Circuit Breaker (Ics value 25 KA)

300 Amp TPN busbars of high conductivity electrolytic quality aluminium

INSTRUMENTS & ACCESSORIES

1 No. 96x96 analogue type Voltmeter suitable range for 3 phase, 4 wire

operation with LED display and selector switch withcontrolled by 3 sets

1 No.96x96 analogue typeAmmeter of suitable range ( 0 to 63Amp), for

3 phase 4 wire operation with LED display and selector switch

3 Nos of LED type phase indicating lamps (RYB) with controlled by 2Amp

1 No.6A, 2 pole Auto/OFF/Manual (2 way with OFF) selector switch.

2 Nos. of push button actuator

Outgoing 1 (6 PM - 6 AM )

TPN DB 6 No. 10 amps SP MCB per phase as outgoing with 3 No. 40

amps DP RCCB of 30 mA leakage current plus 1 No. 40 amps TP

Contactor, push button etc controlled through 0-24 hour timer, photo

sensor and 1 No. 40 amps 4 pole MCB as incomer).

Outgoing 2 ( 6 PM - 11.55 PM)

TPN DB 6 No. 10 amps SP MCB per phase as outgoing with 3 No. 40 amps

DP RCCB of 30 mA leakage current plus 1 No. 40 amps TP Contactor,

push button etc controlled through 0-24 hour timer, photo sensor and 1

No. 40 amps 4 pole MCB as incomer).

Fidder pillar as discribed above Set 2.00 38,856.00 0 77,712.00

5.4) M.R Design, fabrication, assembling, wiring, supply, installation, testing and

commissioning of Automatic control panels with mixed die electric type

capacitors, fabricated out of 14 gauge CRCA sheet steel in cubicle

compartmentised, 3b modular construction, free standing, floor

mounted, dust and vermin proof with reinforcement of suitable size,

angle iron, channel, `T’ sections and/ or flats wherever necessary. Cable

gland plates shall be provided on top the panels. Panels shall be treated

with all anticorrosive process before powder coating as per specifications

and final approved shade. 2 No. earthing terminals shall be provided for

all distribution panels. Panels shall be suitable for 415V, 3 phase, 4 wire,

50 HZ supply system. Lifting hooks shall also be provided in case of large

panels. Approval shall be taken for each panel in the form of shop

drawings before fabrication. Galvanized hardwares with zinc passivation

shall be used in fabrication of panels.

50 KVAR CAPACITOR AUTOMATIC CONTROL PANEL

150 amps TPN manually operated fully drawout type air circuit breaker

as per specification and with following accessories:

96 x 96 mm sq. 0-500 Volt digital voltmeter with selector switch

Phase indicating light shall be protected by 2 Amps SP MCB’s -3 Set

Power factor compensating relay (including power factor meter) in 10

steps for automatic cut off or add on capacitor units to keep the power

factor at 0.98 with variation of loads. All associated auxiliary contactors/

relays/ timer/ auto manual selector switches to be provided - 1 Set.

200 amps TPN Aluminium bus bars with coloured heat Shrinkable

insulated sleeves. - 1 set

c) Outgoings - I :

40 amps TPN MCB - 8 Set

Outgoing feeders consisting of following accessories.

80 amps or capacitor duty 525 volts 50 Hz contactors - 2 Sets

“ON” /”OFF” push buttons and indicating lamps - 2 Sets.

12.5 kVAr, 525 volts capacitor unit with detune filters as specified - 2 Sets.

d) Outgoings - II :

63 amps TPN MCB - 1 Set

Outgoing feeders consisting of following accessories.

80 amps or capacitor duty 525 volts 50Hz contactors - 1 Sets

“ON” /”OFF” push buttons and indicating lamps -1 Sets

25 kVAr, 525 volts capacitor unit with detune filters as specified - 1 Sets.

All MCCB’s shall be of 35 kA breaking capacity.

i. Fast response time of ‘ON’ capacitors 40-60 miliseconds.

ii. Necessary control and firing card with proper wiring and lugs of the

required rating to be provided.

iii. Heavy duty exhaust fans to be provided for cooling Thyristors

iv. LED indication for number of capacitor banks ‘ON’.

v. LED indication of Power Factor lagging or leading.

vi. The APFC system shall be provided with following :

CHANDRESH KUMAR

Construction of Housing Dwelling Units for SIDBI at Plot no. C-40 & C-82 at Inderpuri, Delhi

BILL OF QUANTITY

SUB-HEAD- II - Electrical Work

S.NO DSR- SUB-HEAD(ITEM WISE) UNIT TOTAL DSR-2022 NS Amount Amount

2023 QTY DSR-2022 (Non-Schedule)

a. Over voltage.

b. Voltage imbalance.

c. Over temperature-system should be in standby mode

& automatically restart after above condition restored.

d. Earth leakage.

e. 7% value reactors with iron core.

Capacitor automatic control panel (500 kVA) as described above. Set 2.00 5,11,905.00 0 10,23,810.00

SUPPLY AND INSTALLATION OF DG SET WITH ACCESSORIES

Supply, installation, testing & commissioning of 62.5 KVA (Prime rated) 0 11,56,420.00

diesel generating set in acoustic enclosure, heat exchanger type

alongwith day oil fuel tank including first fill of diesel with fuel piping to

and from DG set including AMF Panel, vibration mounts, base frame,

hardware Batteries, Engine control panel with accessories first fill of lube

4.1) M.R oil silencer with installation, flexible connection bellow / expansion joints Sets 2.00 5,78,210.00

etc.. complete and with all associated equipment / work , cable / Bus bar

terminal boxes and suitable mounting arrangement for mounting of

differntial CT,s protection as per specifications.

Providing, fixing & installing MS exhaust pipe 6 mm thk and all fixing

accessories and hardwares. The exhaust pipes shall be Painted with high

4.2) M.R temperature paint & insulated with 75 mm thick mineral wool (density

150 kg/m3) insulation wrapped in chicken mesh and clad with 26 gauge

aluminium sheet including all MS epoxy painted support structural as

Electrical Work 4307286 12331542

Supply, Installation, Testing and Commissioning of fully automatic 8

Nos. Passanger (Minimum) Elevator, in lift shaft of dimensions

1500mm (W) x 2100mm (D), 544 Kg., with variable voltage variable

frequency drive having a speed of 1.5 metre/ sec and travel height of

19.40 m (approx.) with 6 Stops and Microprocessor based control

suitable for operation on 415 V, 50 Hz, 3 phase A.C. electric Supplying

1.Type of machine Gearless, machine room less

2.Capacity 544 kg

3. Number of Passengers 8 Nos. (minimum)

4.Speed 1.5 mps.

5.No of landing 6 Landings(B+S+3+Terrrace Floor)

6.Number of openings 6 on the same side.

7.Travel approx 19.40 meter

8.Power Supplying 415V/240V, 50HZ 8.Acceptable voltage

Fluctuation +10 to -20%

9.Rate of Accelaration / 0.6-1.5 (adjustable at site) decelration

10.Jerk (m/sec.sq) 0.7-1.5 (adjustable at site)

11.Vibration in car horizontal 20/18 MG maximum

vertical 20/18MG maximum

12.Noise level in car 48dbA max.

13. Door noise level while closing and 52dbA max. opening at a

distance of 1mtr. from car door and 1.5 mtr. from floor level.

14. Type of Drive: Variable Voltage Frequency Drive V3F.

15. Location of Machine Room: Machine room less

16. Indicators car & landings: 7 Segment 25mm digital direction and

indicators in car and at all landings.

17. Special features/other features : Automatic Rescue Device with

dry maintenance free batteries

18. Call register type KDS-50 Micro pushbutton for Car and landing.

19. 3-Way Intercom

20. Manual Cranking operation

21. Integral shaft for gear and motor

22. Emergency Stop Button

23. CVT/Built Voltage Stablizer (Constant Voltage Transformer)

24. Pit ladder and ballustrade

25. Flooring : Provision for Granite flooring with 19mm recess.

26. Emergency cabin lighting and alarm.

27. FRD/Fire Man Drive (Fire Rescue Device)

28. Controls: Resolve Micro Processor based simplex full collective

control with or without attendant operation.

29. Door Safety : PANA 40-Full ray curtain for car door safety.

30. Load weighing device with indicator & bypass function.

31. Lift Announcement System (LAS)

32. Safety gears & over speed governer

33. Infra red door safety device

34. Civil works: All minor civil works such as scaffolding, making

holes, grouting, concreting etc.

35. Provision for connectivity of CCTV.

PASSENGER ELEVATORS-P1 as desctribed above Set 2 0 26,56,914.00 0 5313828

Electrical Work 0 5313828

CHANDRESH KUMAR

Construction of Housing Dwelling Units for SIDBI at Plot no. C-40 & C-82 at Inderpuri, Delhi

BILL OF QUANTITY

SUB-HEAD- II - Electrical Work

S.NO DSR- SUB-HEAD(ITEM WISE) UNIT TOTAL DSR-2022 NS Amount Amount

2023 QTY DSR-2022 (Non-Schedule)

TOTAL DSR AND NON DSR AMOUNT= 43,07,286.00 1,76,45,370.00

CHANDRESH KUMAR

Construction of Housing Dwelling Units for SIDBI at Plot no. C-40 & C-82 at Inderpuri, Delhi

S. No. Description Unit Total DSR Rate Amount (DSR) Amount (NS)

SUB HEAD -I: PUPM EQUIPMENT & ACCESSORIES IN TERRACE

Supplying, installation, testing and commissioning of electric driven terrace

18.4 pump suitable for automatic operation and consisting of following, complete in

all respects, as required: (Terrace Pump)

Horizontal type, multistage, centrifugal, split casing pump of cast iron body &

a) bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520

Suitable HP squirell cage induction motor TEFC type suitable for operation on

415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for

enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming

M.S.fabricated common base plate, coupling, coupling guard, foundation bolts

etc.as required.

Suitable cement concrete foundation duly plastered and with anti vibration pads

Providing laying, testing and commissioning of class 'C' heavy duty MS pipe

confirming to IS 3589/1239 including fittings like elbows, tees, flanges,

reducer, jointing with nuts bolts, gasket and welding etc. and supports, as

required and painting with tow or more coats of synthetic enamel paiing of

required shade complet as directed by Engineer-iin-charge.

Supplying, fixing, testing and commissioning of butterfly valve PN 1.6, with

18.11 Bronze/Gunmetal seat duly ISI marked complete with Nuts, Bolts, washers, - -

gaskets, confirming to IS 13095, of following sizes as required.

Providing, installation, testing and commissioning of dual plate non-return

18.14 valve of following sizes confirming to IS 5312 complete with rubber gasket, GI - -

bolts, nuts, washers etc. as required.

Providing & fixing 100mm dia bourden type, Stainless steel dial type pressure

MR Gauge (0 - 16 Kg ) range, 3 / 8 " BSP bottom entry on Pump Delivery Line Each 2 859.00 - 1,718.00

complete with Ball valve

SUB HEAD -II: INTERNAL HYDRANT, PIPING & ACCESSORIES

Supplying and fixing single headed internal hydrant valve with instantaneous

Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI

conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and

18.9.1 Single headed Gunmetal Set 14 7,646.00 1,07,044.00 -

Supplying and fixing first-aid Hose Reel with MS construction spray painted in

post office red, conforming to IS 884 complete with the following as required.

20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -

2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle.

Drum and brackets for fixing the equipmets on wall. Connections from riser

with 25 mm dia stop gun metal valve & M.S. Pipe and socket.

Supplying and fixing 63mm dia, 15 mtr long RRL hose pipe with 63mm dia

16 18.16.1 male and female gun metal couplings duly binded with GI wire, rivets etc. Each 28 5,202.00 1,45,656.00 -

confirming to IS 636 (type-A)as required. (Gun Metal)

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm

nominal internal diameter size nozzle conforming to IS 903 suitable for

connection to interconnect hose pipe coupling as required (Gun metal)

MR Supply & Fixing of Fire Man's Axe with heavy Insulated rubber tested up to 20

KV and confirming to IS ;926 as required.

MR Providing & fixing 100mm dia bourden type, Stainless steel dial type pressure

19 Gauge (0 - 16 Kg) range, 3 / 8" BSP bottom entry on Pump Delivery Line Each 14 859.00 - 12,026.00

complete with Ball valve

Providing and fixing M.S. fire hose door (Including door frame and all civil

work and finishing) of size 2000mm High x 1600mm Wide x 100 mm Deep

approx.Fabricated from 16 gauge M.S sheet.Provision for hole fasteners on

both sides with double dore & frame with 2 nos locking arrangement with 2

nos tower bolts and Glazed with 4mm thick Float clear glass (glass panel to be

fix in door panel - 700 mm from the bottom of the door and 100 mm from the

20 MR top /sides of door panel) suitably marked on the outside with the letters "FIRE Each 14 12,000.00 - 1,68,000.00

HOSE".all M.S. work to be stove in Enamled Fire Red Colour over appropriate

primer (Front side P.O. Red Paint & inside white paint two coat).The width &

height to depend upon the actual size of the fire shaft available.Contractor to

make shop drawings and get it approved by Enginner -in-charge/Consultant

before fabrication.(Cost shall be inclusive of providing break glass box

containing key for the door)

Providing laying, testing and commissioning of class 'C' heavy duty MS pipe

confirming to IS 3589/1239 including fittings like elbows, tees, flanges,

reducer, jointing with nuts bolts, gasket and welding etc. and supports, as

required and painting with tow or more coats of synthetic enamel paiing of

required shade complet as directed by Engineer-iin-charge.

Digitally signed by

CHANDRESH KUMAR

Construction of Housing Dwelling Units for SIDBI at Plot no. C-40 & C-82 at Inderpuri, Delhi

S. No. Description Unit Total DSR Rate Amount (DSR) Amount (NS)

Providing and fixing inspection & testing assembly/drain assembly consist of

i) 25 mm dia Inspection Test Valve (Ball Valve) & Piping - -

ii) Sight Glass - -

iii) Union - -

iv) 50 mm dia ball valve for drain with piping - -

The arrangment shall be complete as per drawing and as per NBC provisions.

The item will include all works from the sprikler header to the drain pipe.

Supplying and fixing air release valve made of 100 mm dia, required

accessories, as required

SUB HEAD -III: FIRE EXTINGUISHERS

Providing and fixing of carbon-di-oxide type fire extinguishers consisting of

welded M.S. cylindrical body, squeeze lever discharge valve fitted with

pressure indicating guage internal discharge tube 30 cms long high pressure

discharge hose, discharge nozzle, suspension bracket conforming to ID:15683

finished externally with red enamel paint and fixed to wall with brackets

complete with internal charge.

Providing and fixing of ABC Powder type fire extinguishers consisting of

welded M.S. cylinderical body, squeeze lever discharge valve fitted with

pressure indicating guage internal discharge tube 30 cms long high pressure

discharge hose, discharge nozzle, suspension bracket conforming to ID:15683

finished externally with red enamel paint and fixed to wall with brackets

complete with internal charge.

SUB HEAD-IV: FIRE ALARM SYSTEM

Supply, installation testing and commissioning of the following as per

Supplying, installation, testing & commissioning Sector panel sultable for

following zones, complete with visual Indications for short circuit Fault

26 17.1.9 condition and all other standard facilities as per IS: 2189 with mimic diagram

for all area/ zone covered, complete with all connections, interconnections as

Supplying, installation, testing & commissioning of heat detector operating at

54ºC/57ºC with rate of rise cum fixed temperature (dual thermistor) type with

mounting base complete with all connection etc. as required.

Supplying, installation, testing & commissioning of smoke detector with builtin

28 17.1.2 LED and mounting base complete with all connections etc. as required Each 0 1,153.00 - -

Supplying, installation, testing & commissioning of manual call boxes of MS

29 17.1.3 construction in surface/recess with stainless steel chain & hammer assembly Each 12 474.00 5,688.00 -

complete with glass and push button etc. as required

Supplying, installation, testing & commissioning response indicator on

30 17.1.5 surface/recess MS box having two LEDs metallic cover complete with all Each 0 196.00 - -

connections etc. as required.

Supply, installation testing and commissioning of 2W Double sided LED

signage with built in battery back-up for minimum of 3hrs continuous

31 MR operation in an active mode. luminaire shall be fitted with a bi-colour Each 12 9,263.00 - 1,11,156.00

Red/Green LED to indicate its status. complete with all accessories as per

Supplying and fixing of following sizes of steel conduit along with accessories

in surface/recess including painting in case of surface conduit, or cutting the

wall and making good the same in case of recessed conduit as required.

Supplying and Wiring following sizes of FRLS PVC insulated copper

33 conductor, single core cable in the existing surface/recessed steel / PVC - -

conduit as required.

SUB HEAD-V : SPRINKLER SYSTEM & PIPING

Providing laying, testing and commissioning of class 'C' heavy duty MS pipe

confirming to IS 3589/1239 including fittings like elbows, tees, flanges,

reducer, jointing with nuts bolts, gasket and welding etc. and supports, as

required and painting with tow or more coats of synthetic enamel paiing of

required shade complet as directed by Engineer-iin-charge.

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type

sprinklers of rating 68 degree centigrade with required accessories :

Digitally signed by

CHANDRESH KUMAR

Construction of Housing Dwelling Units for SIDBI at Plot no. C-40 & C-82 at Inderpuri, Delhi

S. No. Description Unit Total DSR Rate Amount (DSR) Amount (NS)

1.1) 1.9 Pendent Sprinkler Each 144 484 69,696.00 -

Total (Fire Fighting & Fire Alarm) 20,42,390.00 6,39,642.00

Digitally signed by

CHANDRESH KUMAR