Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.9 LAccepted-AOC 47 A SHIKARGARH ARMY AREA JODHPUR RAJASTHAN 342001 | JODHPUR | JODHPUR | RAJASTHAN | 342001 | L1 | Accepted-AOC Accepted being lowest bidder | |
| 2 | L2₹32.0 L+₹2.5 L (8.64%)Rejected-AOC | L2 | Rejected-AOC Rejected being higher bidder | |
| 3 | L3₹32.9 L+₹3.5 L (11.7%)Rejected-AOC SARDARPURA 1ST B ROAD NEAR HANUMAN JI KA MANDIR JODHPUR RAJASTHAN 342 003 | JODHPUR | JODHPUR | RAJASTHAN | 342003 | L3 | Rejected-AOC Rejected being higher bidder | |
| 4 | L4₹33.4 L+₹3.9 L (13.3%)Rejected-AOC 19 PAOTA C IIIRD ROAD JODHPUR RAJ 342001 | JODHPUR | JODHPUR | RAJASTHAN | 342001 | L4 | Rejected-AOC Rejected being higher bidder | |
| 5 | L5₹34.1 L+₹4.7 L (15.9%)Rejected-AOC | L5 | Rejected-AOC Rejected being higher bidder |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
11 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Jodhpur
GE (AF) Jodhpur
CERTAIN MISC BR REPAIR WORKS UNDER AGE BR II IN TECHNICAL AREA AT AF STATION JODHPUR
2023_MES_585923_1
8554/E8
Open Tender
Civil Works - Others
Item Rate
180 days
GE (AF) Jodhpur
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE (AF) Jodhpur
₹70,000
6 May 2023
15 Mar 2023
13 Apr 2023
15 Mar 2023
11 Apr 2023
30 Mar 2023
Amount
Dismantling posts or struts (Wood,steel or RCC) of any section embedded in concrete,including taking out embedded portion and making good disturbed ground complete all as specified and as directed.
Demolition of cement concrete(unreinforced) of any description and in any position not otherwise provided for all as specified and as directed.
Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete precast concrete block walling complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed .
Demolition of cement concrete in ground floors and pavings not exc 15 cm thickness ( below or above ground level ) and disposing of debries outside MD land complete all as specified and as directed .
Dismantling of fencing wire mesh of any type and removing from site complete all as specified and as directed.
Excavating in post holes in hard dense soil (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed .
M&L for PCC 1:3:6, type C-2 using 40 mm graded stone aggregate as in foundation filling or mass concrete complete all as specified and as directed.
S&F rolled mild steel work Fe 290 (Gde E-165 ) as in fencing posts with or without Y/U/Swan nek made of angle or other section, made to shape complete, welding, drilled for fixing for holding of barbed wire or concertina coil etc to be prepared for hanging or steel hanging fittings also fastening and fixing complete all as specified and as directed .
S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290 Gde E-165 complete all as specified and as directed .
S&F mild steel work conforming to Fe-290 Gde E-165 as in flat iron fillets for securing wire mesh, chain link fencing etc, Hand rails, half round or other steel section or core for wooden hand rail straight portion, drilled and countersunk for baluster running bar and screwing etc or securing bolts complete all as specified and as directed .
S&F for PVC coated galvanised iron chain link fencing, made of GI wire dia not less than 3 mm and minimum dia 4.5 mm after PVC coating, having 50 mm x 50 mm mesh size including line wire, any type of standards, rails, straining bolts, etc including provision of binding wire, fixed as knuckled type complete all as specified and as directed . ( Note :- Line wire shall be measured and paid separately as supply only hereunder)
S&F galvanised Iron (Hot dipped) steel punched type concertina coil of 1050 mm dia (Dia of coil unstratched) and fixed to angle iron posts/struts/swan necks with 3.15 mm dia GI wire including dismantling old unserviceable/rusted concertina coil complete all as specified and as directed
S&F in repair for galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. all as specified and as directed. (Note:Each line wire shall be measured and paid )
Restraining,resecuring including making good galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. all as specified and as directed. (Note:Each line wire shall be measured)
Supply only mild steel round bar 10 mm dia and over to be fixed as line wires etc complete all as specified and as directed.
S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n exc 10cm long and diameter of neck between 11 to 15mm complete all as specified and as directed.
M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.
M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise discribed, and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.
M&L for squared rubble walling, Jodhpur type, brought up to courses, well bonded, bedded and solidly hearted, built in CM 1:4 complete all as specified and as directed .
M&L for (except stone ) squared rubble walling, Jodhpur type, brought up to courses, well bonded, bedded and solidly hearted, built in CM 1:4 complete all as specified and as directed . Note:- Old stones obtained from item No. 03 shall be reused under this item.
M&L for precast cement concrete 1:3:6 type C1 (Using 20 mm graded stone aggregate) block masonry with solid blocks, exceeding 10 cm in width and setting in cement mortar 1:6 including demolition of old block masonry complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate in cills, steps, bands, copings, bed plates, blocks for inserting hold fasts etc. and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed .
M&L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick or cement concrete surfaces finished even and smooth without using extra cement complete all as specifed and as directed.
M&L for cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in, surface channels, drains complete all as specified and as directed.
M&L Extra for forming 30 cm inner girth fair finished drains or channels using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and as directed.
M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.
M&L for providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.
M&L for 75 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregates as in sub base complete all as specified and as directed.
M&L for preparation of new concrete surfaces of any description over 10cm in width or girth not otherwise discribed, and applying two coats of synthetic enamel paint (ordinary tint) complete all as specified and as directed.
M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate in sub floors complete all as specified and as directed .
M & L for Factory made Vitrified heavy Duty parking tiles coloured, matt finish,unglazed and unpolished of size 300x300x10mm thick including 15 mm thick screed bed in CM (1:4) complete all as specified and as directed .
Removing of demolished/excavated old building materials of any description and any type (Existing lying at various location in technical area at AF station) out side MD land including loading into vehicle and unloading at destination of dumping site by any means including making good the disturbed surfaces complete all as specified and directed. Note :- (i) Place/spot outside MD land for depositing demolished/excavated building materials shall be ascertained by the contractor at their own cost. (ii) One metric tonne shall mean 'one load' . The constant given on MES SSR Part-II shall be taken for calculating one load of various materials removed. (iii) Deduction to be made from the volume of loose heaps of different kind of materials to arrive at the solid volume as per standard engineering practice. (iv) The stack measurements of loose heaps shall be recorded in MB. In case it is practically not feasible to record the measurements of loose heaps volume of vehicle box may be recorded for stack measurements. (v) The pucca bound register of old material removed from technical area shall be maintained showing date,vehicle No, volume of box, gate pass No etc duly signed by the contractor, JE and Engineer-in-Charge.
Demoiltion/breaking to Old PCC of any type (unreinforced or reinforced) and removing the same to outside MD land including making good the disturbed surfaces complete all as specified and directed. Note :- (i) Place/spot outside MD land for depositing demolished/excavated building materials shall be ascertained by the contractor at their own cost.
Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for, disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 M complete all as specified and as directed .
M&L for precast cement concrete 1:2:4, type B1 (Using 20 mm graded stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and as directed .
M&L Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and as directed .
M&L for saw dust and sand mixture in a ratio of 1:1 (by volume) with proper sieving the sand of averaging size 1.18 mm, 100% passing through 2.36 mm and 100% retained on 600 micron, spreading in layers not exceeding 30 cm thick, watering, ramming/rolling and finishing to required size, shape, slope etc up to 5.00 mtr high from the base complete all as specified and directed . Note: stack measurement of mix shall be paid
Dismantling of Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
D DEV COMPANY
VIKAS CONSTRUCTION CO.
Om Trading Corporation
JAMWAY MATA CONSTRUCTION COMPANY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .