Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.6 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹27.3 L−₹2.4 L (7.97%)Rejected-AOC | L2 | Rejected-AOC L2 |
Tender Value
₹29.7 L
EMD Value
₹2,760
Closing Date
7 Mar 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
Executive Engineer, PWD Roads Division, Muvattupuzha
One year Running contract for various PWD Roads
2023_PWD_562186_1
PWD/RB/TR/15594/2022_5_1_1/1
Open Tender
Civil Works - Roads
Item Rate
365 days
PWD Roads under road section Koothattukulam
Please refer Tender documents.
7 documents required · 7 mandatory
₹50,000
Yes
₹2,760
Yes
11 May 2023
27 Feb 2023
10 Mar 2023
27 Feb 2023
7 Mar 2023
27 Feb 2023
Amount
initial rectification works
55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement.
55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface.
OD109898/2022-2023:Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509
5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.
OD109899/2022-2023: Conducting and Reporting Routine Inspection for the entire length of the Project road at a frequency of 7 days throughout the agreement period of the Running contract as directed by the Departmental officers at site.
Pre monsoon works
OD109886/2022-2023:Clearing existing chocked culverts by jetting of appropriate machinery ( 5HP pump set & water tanker ) and including all charges etc complete as per dept officers
2.1.2:Cutting of trees, including cutting of trunks, branches and removal of stumps, roots, stacking of serviceable material with all lifts and up to a lead of 1000 metres and earth filling in the depression/pit. Girth from 600 mm to 900 mm
OD109887/2022-2023:Supplying and laying quarry waste for road formation
55.15:Refurbishment of existing signboardsRefurbishment of existing signboards of all size except gantry mounted ones to their original reflectivity & position by removing obstructions like overgrowth vegitation etc ,if any,washing the signboards with water & soap solution to remove all dirt, oil etc. , correcting any dislocations including minor repairs, replacement of lost nut and bolts etc complete.
OD109889/2022-2023:Hire charges for tipper for removing the materials to dumping place
OD109890/2022-2023:Hire charges of JCB
OD109891/2022-2023:Engaging manmazdoor
OD109892/2022-2023:Filling up potholes with bituminous ready mix compound (25 kg bag) and compacting by ramming to get a compact surface after applying bituminous priming coat measured seperately including cost of material, laying charges, transportation to site etc. complete rate is arrived for a bag of 25 kg
OD251750/2022-2023:Providing and fixing RC work board with non reflectorized vinyl sign with 1 year warranty manufactured vinyl printed sheeting fixed over aluminium sheeting 2mm thick/ aluminium composite material 4mm thick with area not exceeding 0.9 sqm, with suitable back supporting frame of MS angle 40x40x6 and supported on GI pipe pole 50mm NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete with min size 45cmX45cmX60cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy paint over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc
preventive maintenence
55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement.
55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface.
OD109894/2022-2023:Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509
5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.
Emergency works
OD109895/2022-2023:Hire charges for tipper for removing the materials to dumping place
OD109896/2022-2023:Engaging manmazdoor
OD109957/2022-2023:Hire charges of JCB
ERNAKULAM DISTRICT LABOUR CONTRACTING COOPERATIVE SOCIETY LIMITED
Bidder Name
BAIJU ISSAC
ERNAKULAM DISTRICT LABOUR CONTRACTING COOPERATIVE SOCIETY LIMITED
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_828473.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .