supply and installation play equipment, benches , open air equipments and repairing of play equipment at various gardens of mbmc iurisdiction (period- 1 year)

Amount

Supply & Installation Play Equipments, Benches, Open Air Equipments & Repairing of Play Equipments At Various Gardens of MBMC Jurisdiction (Period - 1 Year)

DELUXE SLIDE (SS) Rec. Age :- 4 - 12 yrs. The area :- 4.5 m x 0.7 m Safe play area :- 5.5 m x 1.7 m Height :- 1.5 m This item consists of ISI marked structure. The attractive deluxe ss slide chute is made in GI / ss. The stainless steel is of 304 grades with 16 SWG. The structure comprises of 20 NB and 25 NB powder coated GI pipes. The center support is made in 80 NB powder coated GI pipe. All pipes are ‘a’ class pipes, the ladder cum railing is made up of 20 NB and 25 NB GI pipes .the platform is made up of 14 SWG GI sheets with anti-skid for firm foot grip. There are triangular steps of 16 SWG GI sheets. The chute has its end such as it causes safe landing of the child.

TRIPLE WAVE SLIDE Rec. Age :- 4 – 12 yrs. The area :- 5.7 m x 2 m Safe play area :- 7.7 m x 3 m Height :- 2.1 m The triple wave slide is made up of fiberglass reinforced plastic. The most attractive and enjoyable of its kind. The trapezium platform of the slide is made up of the fiber glass reinforced plastic .the vertical platform support pipes used are of 80 NB powder coated GI pipes. The railing is made in rotational molding. The slide entry is made up of 20 NB powder coated GI pipes. All pipes are ‘A’ class pipes

WAVE SLIDE (FRP) Rec. Age :- 4 – 12 yrs. The area :- 4.8 m x 0.5 m Safe play area :- 5.8 m x 1.5 m Height :- 2.1m This item consists of isi marked structure. The attractive wave slide chute is made up of 4 mm thick fiber reinforced plastic materials. The structure comprises of 20 NB and 25 NB powder coated GI pipe. The center support is made in 80 NB powder coated GI pipe. The ladder cum railing is made 20 NB and 25 NB GI pipes. The platform is made up of 14 SWG GI sheet with anti-skid for firm foot grip. There are triangular steps 16 SWG GI sheet. The chute has its end such as it causes safe landing of the child. All pipes are ‘a’ class pipes

FRP DELUXE PLAIN SLIDE - 1.5 MTR. The area : 3 m x 0.6 m Safe play area : 4.2 m x 1.6 m Height : 1.5 m Rec. Age : 4 - 12 yrs. The attractive deluxe plain slide chute is made up of 6 mm thick fiber reinforced plastic materials. The center support is made of 80 mm powder coated GI pipe. The ladder cum railing is made 20 mm and 25 mm GI pipes. The platform is made up of 14 SWG GI sheet with anti skid for firm foot grip. There are triangular steps 16 SWG GI sheet.

FRP DELUXE PLAIN SLIDE - 2.1 MTR. The area : 4.2 m x 0.6 m Safe play area : 5.2 m x 1.6 m Height : 2.1 m Rec. Age : 4 - 12 yrs. The attractive deluxe plain slide chute is made up of 6 mm thick fiber reinforced plastic materials. The centre support is made of 80 mm powder coated GI pipe. The ladder cum railing is made 20 mm and 25 mm GI pipes. The platform is made up of 14 SWG GI sheet with anti skid for firm foot grip. There are triangular steps 16 SWG GI sheet.

FRP WAVE SLIDE - 1.5 MTR. The area : 3.3 m x 0.6 m Safe play area : 4.2 m x 1.6 m Height : 1.5 m Rec. Age : 4 - 12 yrs. The attractive wave slide chute is made up of 4 mm thick fiber reinforced plastic materials. The center support is made of 80 mm powder coated GI pipe. The ladder cum railing is made 20 mm and 25 mm GI pipes. The platform is made up of 14 SWG GI sheet with anti skid for firm foot grip. There are triangular steps 16 SWG GI sheet.

CURVE SLIDE Rec. Age :- 3-12 yrs. The area :- 3.6 x 2.9m Safe play area :- 5.1 x 4.4m Height :- 1.5m in this innovative product, the curve part is made from fiberglass-reinforced plastic giving it a mirror image. The thickness of the curve slide is 4mm thick. The center support of the slide is of 80 NB powder coated GI pipe. All pipes are ‘a’ class pipes, the support structure of the slide is made up of 25 NB powder coated GI pipe. In order to ensure safety while the ladder ms angle of 25 x 25 x5 is given so that the child does not fall while climbing. The ladder cum railing is made 20 mm and 25 mm GI pipes. The platform is made up of 14 SWG GI sheet with anti skid for firm foot grip. There are triangular steps 16 SWG GI sheet.

ROLLER SLIDE HT 1.5 MTR Rec. Age :- 3 – 12 yrs. The area :- 5.1 m x 0.5 m Safe play area :- 6.1 m x 1.5 m Height :- 1.5 m the most attractive and enjoyable of its kind, the chute of this slide consists of molded plastic rollers. The rollers are made up of high-density polyethylene plastic with UVstabilized. The main frame is made up of ms angle 50 x 50 x 5. The handrail is made in 25NB GI pipe. The structure comprises of 25 NB powder coated GI pipe. All pipes are ‘a’ class pipes, the ladder frame is made up of 20 NB and 25 NB powder coated GI pipes, while the center support is made from 80 NB GI pipe. The platform provided is made from 14 SWG GI sheet with anti-skid. The triangular steps provided are made out of 16 SWG GI sheet for firm grip and safety.

ROLLER SLIDE - 2.1 MTR. The area : 5.9 m x 0.5 m Safe play area : 6.9 m x 1.5 m Height : 2.1m Rec. Age : 4 - 12 yrs. Slide chute made of 50 x 50 x 5 ms angle & 50 x 10 ms flat, Top 25mm GI pipe. Blow moulded rollers 60 nos. The center support is made of 80 mm powder coated GI pipe. The ladder cum railing is made 20 mm and 25 mm GI pipes. The platform is made up of 14 SWG GI sheet with anti skid for firm foot grip. There are triangular steps 16 SWG GI sheet.

FRP ROLLER SLIDE – General information : Age group : 4 – 12 yrs. Product area :- 5.8 m x 1.0 m Safe play area :- 6.8 m x 2.0 m Height :- 2.1m Material specification : the roller slide is made up of fiberglass reinforced plastic. The most attractive and enjoyable of its kind, the slide chute consists of molded plastic rollers spread over the length. The rollers are made up of HDPE with uv stabilized pigment. The square platform of the slide is made up of the fiberglass reinforced plastic. The vertical platform support pipes used are of 80 NB powder coated GI pipes. The railing is made in rotational molding. The slide entry is affixed on 80 NB and 80 x 20 NB nylon clamp. The ladder frame is made in 20 NB and 25 NB powder coated GI pipes. The triangular steps are made in 16 SWG GI sheets.

FRP MINI WAVE SLIDE - 0.9 MTR. The area : 2.2 m x 0.6 m Safe play area : 3.7 m x 2.1m Height : 0.9m Rec. Age : 3 - 5 yrs. In this product the center support is made up of 50 mm pipe. The slide portion is made in fibreglass reinforced plastic. The thickness of the mini wave slide is 4mm with proper reinforcement to support the module. The triangular steps of the slide are of 16 SWG and ladder frame is made in 20 mm powder coated GI pipe. The landing support is made up of 25 mm GI pipes. The ladder is designed in such a way there won’t be entrapment of child’s foot while playing. All the sharp edges and corners properly grinded to GIve smooth finish so that children are not hurt while playing the pure polyester powder coating done on the pipes extends the life of equipments.

FRP SPIRAL SLIDE - 1.5 MTR The area : 3.5 m x 1.8 m Safe play area : 4.5 m x 2.5 m Height : 1.5 m Rec. Age : 4 - 12 yrs. The spiral slide chute is made up of 6mm thick fiber reinforced plastic chute has both side gel coat finishes. Slide is supported on 80 mm center support GI pipe. The platform shall be made up of fiber reinforced plastic (FRP) 6 to 8 mm thickness with anti skid surface. Platform on each side should be equal in length 1.0m x 1.0m. The platform is supported by 4 nos. Vertical 80 mm powder coated GI pipes. Railing is provided to the platform and is made from low-density polyethylene, supported by 20 mm GI pipe with nylon clamp. Ladder is made up of 25 mm GI pipe having railing of 20 mm. There are triangular steps 16 SWG GI sheet.

FRP SPIRAL SLIDE - 2.1 MTR The area : 3.5 m x 1.8 m Safe play area : 4.5 m x 2.5 m Height : 2.1 m Rec. Age : 4 - 12 yrs. The spiral slide chute is made up of 6mm thick fiber reinforced plastic chute has both side gel coat finishes. Slide is supported on 80 mm center support GI pipe. The platform shall be made up of fiber reinforced plastic (FRP) 6 to 8 mm thickness with anti skid surface. Platform on each side should be equal in length 1.0m x 1.0m. The platform is supported by 4 nos. Vertical 80 mm powder coated GI pipes. Railing is provided to the platform and is made from low-density polyethylene, supported by 20 mm GI pipe with nylon clamp. Ladder is made up of 25 mm GI pipe having railing of 20 mm. There are triangular steps 16 SWG GI sheet.

FRP MINI TUBE SLIDE - 1.5 MTR. The area : 3.3 m x 2.8 mm Safe play area : 4.3 m x 3.8 m Height : 1.5 m Rec. Age : 4 - 8 yrs. The massive tube slide structure is supported on an 80 mm powder coated GI pipe. The slide chute is made up of FRP material. The ladder of the slide is made out of 20 and 25 mm GI pipes and the platform is provided with 14 SWG GI sheets and railings provided for the safety of the children playing on it. The triangular steps provided are made out of16 SWG GI sheet for firm foot grip on the children.

DOUBLE ARCH SWING Rec. Age :- 4-14 yrs. The area :- 3 m x 1.5 m Safe play area :- 4 m x 3.5 m the arch shaped side frame of the swing is made up of 80 NB GI pipe and top pipe is made up of 50 NB GI pipe. All pipes are ‘a’ class pipes the frame is powder coated to GIve an esthetic look. The two swings are made up of 10 mm thick anti-skid chequered reinforced rubber top. The belt seat is suspended on 6 mm rubber coated GI chain. The ball bearings are mounted inside a specially designed nylon clamp.

DOUBLE SWING - ECO Area : 3 m x 2.5m Safe play area : 4 m x 3.5m Rec. Age : 4 - 12 yrs 50mm GI pipe is used as top bar having 2 nos of connecting junction box Four nos of leg support made up 40mm GI pipes. Clamps assembly noiseless and smooth movement to the swing, plastosol coated short link chain of 6 mm dia. Seat rubber with non skid surface with nylon lining pattern. Triangular hook are moulded in belt in such a way that it would not project from the top surface of the belt seats.

DOUBLE TODDLER SWING The area : 1.8 m x 1.0 m Safe play area : 2.5 m x 2.0 m Rec. Age : 3 - 8 yrs. The leg support of the swing is made up of 40 mm while the top bar is of 50 mm GI pipes. The GI pipes are powder coated. The bucket seats of the toddler swing are made of Rubber with non skid surface with nylon lining pattern.. The ball bearings are mounted inside specially designed nylon clamps. The bucket seat is affixed on 6mm thick GI chain. The seats are made with full care so that the child does not fall from it while swinging.

DELUXE SWING The area :- 1.8 m x 1.8 m Safe play area :- 2.8 m x 2.8 m the deluxe swing can easily accommodate three adults at a time. Its top pipe is made using 50 NB, while the leg supports are of 40 NB powder coated GI pipes. It is provided with a corrugated pvc roof. The seat frame is fabricated out of 20 NB GI pipe, while the seat is made from GI steel strips of 16 SWG. The belt seat is affixed on 6 mm rubber coated GI chain. The ball bearings are mounted inside a specially designed nylon clamp. All pipes are ‘a’ class pipes

GARDEN SWING The area :- 1.8 m x 1.8 m Safe play area :- 2.8 m x 2.8 m the deluxe swing can easily accommodate 03 adults at a time. Its top pipe shall be made using 50 mm NB g.i. Pipe, while the leg supports are of 40 mm NB powder coated g.i. Pipe. Decorative frame shall be GIven inside of two leg pipes. Leg pipe and top bar shall be attached with junction box which shall be made of 4 mm ms plate with GI plating .it shall be provided 2 mm thickness of FRP/roto roof. . This arihant brand item structure shall be specially design for children’s safety as well as mental and physical development .the roof frame shall be fabricated out of 20 mm NB GI pipes., the belt seat shall be affixed on 6 mm rubber coated GI chain. The ball bearings are mounted inside a specially designed nylon clamp.

THREE IN ONE The area : 1.8 m x 1.8 m Safe play area : 2.8 m x 2.8 m Rec. Age : 2 - 4 yrs. As the name suggests this item has a combination of three items such as swing, slide and see-saw. The complete frame of this item is fabricated from 20 mm and 25 mm powder coated GI pipes. The see-saw seats swing bucket seat and the slide chute is made from FRP. The bucket is attached to a chain of 4 mm thickness. The slide ladder is provided with triangular steps of 16 SWG. The ladder is made using 25 mm GI pipes.

FOUR IN ONE The area : 1.8 m x 2.8 m Safe play area : 2.8 m x 3.8 m Rec. Age : 2 - 4 yrs. The name suggests this item has a combination of four items such as swing, cross-n-zero, slide and seesaw. The complete frame of this item is fabricated from 20 mm and 25 mm powder coated GI pipes. The slide in the combination set is made up of fiberglass reinforced plastic. The slide landing support is made in 20 mm pipe. The slides are GIven a smooth finish so that the child does not hurt itself while playing on it. The cross n zero boxes are made up of lldp and pipes inserted are of 15mm pipe. The bucket swing is made up of FRP and is attached to a chain. The see saw lever and stand is made up of 20 mm GI pipe. The see saw seat is made out of FRP. The bearing used is of heavy-duty bush type.

FOUR SEAT ARCH SWING Area : 6 m x 1.5 m Safe play area : 7 m x 3.5 m Age : 6 - 12 yrs. The arch shaped side frame of the swing are made up of 80 mm GI pipe and top pipe is made up of 50 mm GI pipe. Supporting top bar of the swing is fitted with special design nylon clamps assembly. It GIves noiseless and smooth movement to the swing round plastosol coated short link chain of 6mm dia. Seat used is rubber with non skid surface with nylon lining pattern. Triangular hook are moulded in belt in such a way that it would not project from the top surface of the belt seats. All GI structure is powder coated / pu painted.

CROSS - N – ZERO The area : 1 m x 0.3 m Safe play area : 2 m x 1.3 m Rec. Age : 4 yrs onwards. This item provides brain-refreshing experience to the children and enhances their tactical strength by providing them an intelligent game. The prisms for the ‘x’ and ‘o’ of this item are made of blow moulded plastic while the frame is made up of low-density polyethylene in blow moulding. The prisms are fixed on a powder coated GI frame of 25 mm and 15 mm GI pipes.

PLATFORM MGR FRP TOP The area : 1.8 m dia. Safe play area : 2.8 m dia. Height : 1.0 m Rec. Age : 5 - 14 yrs. The platform of this merry - go - round consists of non-skid type FRP top of 8mm thickness. It is provided with handrails of 25mm GI pipes. The bearing used in this item is of dual heavy duty bearing lubricated with water sealant 51312 & 6310.

PLATFORM MGR METAL TOP The area : 1.5 m dia. Safe play area : 2.5 m dia. Height : 1.0 m Rec. Age : 5 - 14 yrs. The platform of this merry go round consists of non-skid type aluminum chequered plate of 16 SWG. The ring on which the chequered plate is placed is made out of 25 mm GI pipes. The support below the chequered plate is of 40 x 40 x 5 And 25 x 25 x 5 GI angle. The platform frame is made in 25 x 5 and 40x5 ms angle. It is provided with handrails of 20 mm GI pipes. The whole structure is mounted on heavy-duty bearing shaft permanently lubricated with water sealant. The stand of this mgr platform is made out of 80 mm GI pipes. The foundation frame is fabricated with 40 x 40 x 5 angle.

ANIMAL MERRY GO ROUND Rec. Age :- 3 - 12 yrs. The area :- 1.5 m dia. Safe play area :- 2.5 m dia. The main frame of the animal merry go round is made up of 25 NB & 40 NB GI pipes. The GI pipes are powder coated. The stand is made in 80 NB GI pipes. All pipes are ‘a’ class pipes, the whole structure is mounted on heavy-duty bearing shaft permanently lubricated with water sealant. The animal seats are made out of molded plastic in rotational molding process (LLDPE/HDPE). It accommodates 4 children at a time.

FOUR SEAT MGR The area : 1.5 m dia. Safe play area : 2.5 m dia. Height : 1.0m Rec. Age : 5 - 12 yrs. The item is having its structure made up of 40 mm GI pipes (isi). The bucket seats fitted are of FRP type. The bearing used in this item is of dual heavy duty ls 13, which is permanently lubricated and is with water sealant. Foot rest fabricated through 25mm GI pipes.

STANDARD SEE-SAW Rec. Age :- 4 - 10 yrs. The area :- 2.4 m x 0.5 m Safe play area :- 3.4 m x 1.5 m The standard see saw is a good entertainer for the children. The lever of the see –from moulded plastic. The lever is fitted on 40 NB GI pipe. All pipes are ‘a’ class pipes, the bearing used is of heavy duty bush type.

MULTI SEATER SEE – SAW Rec. Age :- 3 - 10 yrs. The area :- 3 m x 0.5 m Safe play area :- 4 m x 1.5 m the ms see saw comprises four roto (fiber reinforced plastic) /roto molding( LLDPE /HDPE) seats. The lever is consisted of 20 NB and 80 NB powder coated GI pipes. The bearing used in this item is heavy duty nylon bush type. The stand for see saw is made using 50 NB GI pipe. All pipes are ‘a’ class pipes

DOUBLE SEE SAW The area : 2.4 m x 1.5 m Safe play area : 3.5 m x 2.5 m Rec. Age : 4 -10 yrs. Height: : 0.5 m The lever is made of 40mm GI pipe, handle made of 20mm GI pipes. Seat of see saw shall be made of FRP Stand made of 50mm GI pipes & angle frame for foundation, with lubricating bush system.

A TO B SCRAMBLER Rec. Age :- 3 - 8 yrs. The area :- 4.5 m x 1.2 m Safe play area :- 5.5 m x 2.2 m The frame of a to b scrambler consists of alphabet shape ‘a’ and ‘b’ which is made from 25 NB GI pipes. It has spacers of 20 NB GI pipes of traders of 385 mm and riser 200 mm. It also consists of a ladder placed between ‘a’ and ‘b’ made from 20 and 25 NB GI pipes. All the pipes of the item are powder coated to avoid rusting of the pipes and for esthetic look. All pipes are ‘a’ class pipes.

WALKING BARREL Rec. Age :- 8 – 12 yrs. The area :- 1.3 m x 0.5 m Safe play area :- 2.3 m x 1.5 m Height :- 1.8m It consists of drum, which is made up of moulded linear low density polyethylene (LLDPE/HDPE) in one piece, which is supported with handles of 20 NB GI pipes. All pipes are ‘a’ class pipes, the barrel revolves in the bearings with special housing to prevent outside dust particles. The vertical support is made up of 80 NB GI pipe, with handles provided for holding while playing.

CIRCULAR SWING Rec. Age :- 3 - 10 yrs. The area :- 1.5 m x 2 m Safe play area :- 2.5 m x 3 m The leg support of this item is made up of 40 NB, while the top bar is from 50 NB powder coated GI pipes. The swing frame is made from 25 NB and 15 NB powder coated GI pipes. All pipes are ‘a’ class pipes There are two seats provided which are made out of molded plastic in roto moulding process. The platform is made using aluminum chequered plate for footrest and bearing assembly is made.

SKY ROCKER Rec. Age :- 6 – 12 yrs. The area :- 2.5 m x 0.6 m Safe play area :- 3.5 m x 1.6 m Height :- 1.7 m the most attractive and enjoyable of its kind is made up of 25 NB powder coated GI pipe. The main frame support is made from 80 NB GI pipes, while the top pipe is of 40NB and 25 NB GI pipe. All pipes are ‘a’ class pipes, the top pipe is inserted into a nylon bush which GIves the rider a swinGIng experience to enjoy

BALANCING BRIDGE The area : 6.9 m x 0.6 m Safe play area : 7.9 m x 1.6 m Height : 2.5 m Rec. Age : 5 – 12 yrs. This is an exciting item for children of age group from 5 to 12 yrs. Its main frame and the long spacers are made using 40 mm GI pipes. The bridge is made up of floats of moulded high density polyethylene of 600 mm dia and is kept swinGIng on two ms wire ropes. The bridge is kept at a height of 150 mm from the ground level. A rope of 18 mm thickness is provided overhead for the safety of children while balancing on it. The two support pipes are made from 40 mm GI pipes (04 nos). To hold the float there are GI clamps of 16 SWG.

CRYSTAL MAZE The area : 2.4 m x 2.4 m Safe play area : 3.4 m x 3.4 m Height : 2.6 m Rec. Age : 3 - 12 yrs. This globular structure is made for children and is fabricated out 20mm pipes having length 550mm 15 nos., 630mm 10 nos., 640mm 20 nos., 565mm 20nos,. 650mm 40 nos., 665mm 10 nos. These pipes are assembled together and are supported on 40mm GI pipes having length 1500mm 5 nos. Centre support having length 3000mm 1 no. Ms plate 8mm thick 150mm dia with 5 nos of holes 10 plates & 6 nos of holes 25 plates, support plates 6 nos with 5 nos of holes

CRISS CROSS SCRAMBLER The area : 1.5 m x 1.5 m Safe play area : 2.5 m x 2.5 m Height : 2.1 m Rec. Age : 4 - 12 yrs. The main frame of this item is fabricated from 25 mm powder coated GI pipe. There is one centre support of 40 mm GI pipe and horizontal bars of 20 mm pipe. The pipes are powder coated .

SWINGING LOOP SCRAMBLER The area : 3.2m x 1.0m Safe play area : 4.2m x 2.0m Height : 2.5m Rec. Age : 5 - 14 yrs. The frame is fabricated out of 50mm and 25mm GI pipes. There are 9 nos. Of loops fabricated out of 20mm GI pipe & Supported by hooks made up from ms flat 50 x 10mm.

TURBO TOWER Rec. Age :- 4 - 12 yrs. The area :- 1.8 m diameter Safe play area :- 2.8 m diameter Height :- 2.1 m In this interesting product the center support is made up of 80 NB powder coated GI pipe. The loop GIven to the turbo towers are made up of 15 GI powder coated GI pipe. The rings of the turbo tower are made up of 20 NB powder coated GI pipes. The bend pipes are made in 25 NB GI pipes. All pipes are ‘a’ class pipes; there is a sufficient distance between the rings for the children climbing on it.

S BRIDGE SCRAMBLER The area : 3.5 m x 2.0 m Safe play area : 4.5 m x 3.0 m Height : 2.1 m Rec. Age : 4 - 12 yrs. It is made up of 25 mm GI pipe as the main body, which is in 's' Shape, the vertical supports are made up of the 40mm GI pipes Of the total length of 2.1m above ground level. It has two numbers of ladders, which are made up of 40mm GI pipes. The heights of the ladders are 2.1m above ground level.

SATELLITE SCRAMBLER Rec. Age :- 4 - 12 yrs. The area :- 2.4 m x 2.4 m Safe play area :- 3.4 m x 3.4 m Height :- 3.4 m This item comprises top globular frame, ladder frame and support column and steps. The pipes used in this item are 25 NB and 40 NB GI pipes. The top globe is fabricated from 25 NB GI pipes supported on a 40 NB vertical GI pipes. All pipes are ‘a’ class pipes The structure is powder coated to avoid rusting and for esthetic look. The steps of the ladders are made from 15 NB GI pipes. The chain ladder is 7mm thk for climbing the scrambler.

NET ROCK SCRAMBLER HT 1.5 MTR The area : 2.5 m x 1.5 m Safe play area : 3.5 m x 2.5 m Height : 1.5 m Rec. Age : 5 – 14 yrs. This item is a combination of both rock and net scrambler. The platform of the rock scrambler is made up of 6 mm thick fibreglass reinforced plastic (FRP). The main frame is made from 40 mm GI pipes. The net scrambler is made from 18 mm diameter nylon rope attached by specially designed nylon ball clamps. These ropes are attached to the pipe frame fabricated from 40 mm GI pipes with ‘u’ hooks.

NET ROCK SCRAMBLER - 2.1 MTR The area : 2.8 m x 1.5 m Safe play area : 3.8 m x 2.5 m Height : 2.1 m Rec. Age : 7 - 14 yrs. This item is a combination of both rock and net scrambler. The platform of the rock scrambler is made up of 6 mm thick fiber reinforced plastic (FRP). The rocks are bolted on same platform, with a gradient of 65 degree from the ground. The main frame is made from 40 mm GI pipes and top bar 50mm GI pipe. The net scrambler is made from 18 mm diameter nylon rope attached by specially designed nylon ball clamps. These ropes are attached to the pipe frame fabricated from 40 mm GI pipes with ‘u’ hooks

DOUBLE BAR Rec. Age :- 6 - 14 yrs. The area :- 1.9 m x 1.5 m Safe play area :- 2.9 m x 2.5 m The double bar being from exercise range provides a structure for physical exercise to the children. The complete structure is made out using 40 NB powder coated GI pipes. The spacer pipes used are of 25 NB GI pipes. All pipes are ‘a’ class pipes.

LOOP RUNG Rec. Age :- 5 – 14 yrs. The area :- 3.2 m x 0.9 m Safe play area :- 4.2 m x 1.9 m This is another kind of item that provides hanGIng experience to the children. The frame is fabricated out of 40 NB and 25 NB powder coated GI pipes. All pipes are ‘a’ class pipes, there are 09 triangular loops made from 15 NB, which are welded to the top pipe of the frame. The top pipe is made out of 80 NB GI pipes. The ladder used is designed to the side support pipe itself.

TODDLER SWING Rec. Age :- 3-8 yrs. The area :- 2.8m x 1.0m Safe play area :- 4.0m x 2.0m In the toddler swing the center support is made up of 100 NB GI pipes. The horizontal bars are made up of 50 NB GI pipes. All GI pipes are powder coated. All pipes are ‘a’ class pipes, between the two horizontal bars there is a heavy-duty metal clamp attached to it. The bucket seats of the toddler swing are made of rubber with anti skid. The ball bearings are mounted inside specially designed nylon balls. The rubber seat is affixed on 6mm thkGI chain. The seats are made with full care so that the child does not fall from it while swinGIng. The toddler swing is designed specifically for toddlers of age 3-8 years.

ROCKING BOAT Rec. Age :- 3 - 8 yrs. The area :- 1.2 m x 0.5 m Safe play area :- 2.2 m x 1.5 m This item has a rocking movement limited by pipe ears situated symmetrically. It can accommodate two children at a time on its moulded plastic seats. The seats are made from low density polyethylene in rotational mould process. The structure of this item consists of 15 NB and 25 NB powder coated GI pipes bended to GIve the shape that of the boat. All pipes are ‘a’ class pipes The seat frame is made in 50 x 3 ms flat with GI plating.

VIP BENCH The area : 1.2 m x 0.6 m Capacity : 03 adults This is vip bench the seating portion and backrest portion is made up of FRP pultrusion process. At a time 3 adults can sit on the bench. And the stand is made up of cast iron in casting process. The vip bench can accommodate 3 adults at a time. The paint GIven to the bench will increase the life of the product.

STADIUM BENCH(FRP) The area :- 1.2 m x 0.6 m Capacity :- 3 adults. Having a spacious accommodating capacity of two persons the stadium bench is made in fiberglass reinforced plastic. The stands of the bench are made using 25 NB powder coated GI pipes. The flat of 50x10 is welded in the grounded level. There is a smooth finish GIven to the bench so that no damage is caused to the clothes of the person while sitting on it. All pipes are ‘a’ class pipes

DELUXE BENCH The area : 1.2 m x 0.6 m Capacity : 3 adults. This item is an attractive kind of bench for using it in gardens. It can comfortably occupy 3 adults at a time. The main frame is made up of 25 mm powder coated GI pipe. The seat consists of GI perforated sheet, which is bent to GIve maximum support to the human body.

DELUXE BENCH FRP The area : 1.2 m x 0.6 m Capacity : 3 adults. This bench consists of an FRP sheet with suitable curve to function as a seat and to comfortably accommodate human body. It has a capacity to suite 3 adults comfortably and easily. The structure of the bench is fabricated out of 25 mm powder coated GI pipe.

BLOSSOM BENCH The area : 1.5 m x 0.6 m Capacity : 03 adults. In this blossom bench the four leg supports are made from 40 mm powder coated GI pipes. The bench is made in FRP pultrusion process. At a time 3 adults can sit on the bench. The FRP pultrusion process c section is affixed by nuts and bolts on 50 mm GI pipes.

PLANK BENCH FRP The area : 1.5 m x 0.6 m Capacity : 3 adults. Having a spacious accommodating capacity of three persons this bench is made in fibreglass reinforced plastic. The stands of the bench are made using 40 mm powder coated GI pipes.

STANDARD BENCH The area : 1.8 m x 0.6 m Capacity : 4 adults. The bench stand is made up of 20 NB GI class pipe each bench has 4 nos of stand. Bench strip is made up of 16 SWG GI sheets. A specially designed slot shape is GIven to strip for shifting purpose. Each bench has 7 nos of strip. Four adults can seat comfortably on this bench. The strip & stand are available in different colour in powder coating.

DUSTBIN SS Height : 0.6 m Dia. : 0.3 m This novel kind of dustbin is especially designed for accommodating dry as well as wet kind of trash. The cylinder of the bin is fabricated out of ss sheet and 380 mm long. The drum is mounted on nylon clamp to provide it a complete rotation of the drum to facilitate the garbage removal. The frame of the dustbin is made up of 25 mm GI pipes

CARTOON BIN Height : 0.6 m Dia. : 0.4 m This dustbin is made up of FRP of 3 mm to 4 mm thick with a diameter of 1.25 feet given a shape of cartoon with attractive color.

TRUNK BIN Height : 0.6 m Dia. : 0.4 m This dustbin is made up of FRP of 3 mm to 4 mm thick with a diameter of 1.25 feet given a shape of cartoon with attractive color.

ICE CREAM BIN Height : 0.6 m Dia. : 0.4 m This dustbin is made up of FRP of 3 mm to 4 mm thick with a diameter of 1.25 feet Given a shape of ice cream with attractive color.

BRINJAL DUSTBIN Height : 0.6 m Dia. : 0.4 m This dustbin is made up of FRP of 3 mm to 4 mm thick with a diameter of 1.25 feet GIven a shape of brinjal with attractive color.

FROG DUSTBIN Height : 0.6 m Dia. : 0.4 m This dustbin is made up of FRP of 3 mm to 4 mm thick with a diameter of 1.25 feet GIven a shape of frog with attractive color.

FISH DUSTBIN Height : 0.6 m Dia. : 0.4 m This dustbin is made up of FRP of 3 mm to 4 mm thick with a diameter of 1.25 feet GIven a shape of fish with attractive color.

SPRING RIDER DUCK The area : 1 m x 0.5 m Safe play area : 2 m x 1.5 m Rec. Age : 3-6 yrs. The spring rider being a duck provides an unlimited fun to the children riding on it. The duck is made out from fiber reinforced plastic (FRP). The handles provided for gripping is made up of 15 NB GI pipes. The duck is mounted on a pair of heavy-duty compression spring. Also a GI flat is provided for footrest. The spring is mounted on 5mm thick plate. And the stand for support is made out of 40 NB pipe.

SPRING RIDER BIKE The area : 1 m x 0.5 m Safe play area : 2 m x 1.5 m Rec. Age : 3-6 yrs. The spring rider being a bike provides an unlimited fun to the children riding on it. The bike is made out from fiber reinforced plastic (FRP). The handles provided for gripping is made up of 15 NB GI pipes. The bike is mounted on a pair of heavy-duty compression spring. Also a GI flat is provided for footrest. The spring is mounted on 5mm thick plate. And the stand for support is made out of 40 NB pipe.

SPRING RIDER PONY The area : 1 m x 0.5 m Safe play area : 2 m x 1.5 m Rec. Age : 3-6 yrs. The spring rider being a pony provides an unlimited fun to the children riding on it. The pony is made out from fiber reinforced plastic (FRP). The handles provided for gripping is made up of 15 NB GI pipes. The pony is mounted on a pair of heavy-duty compression spring. Also a GI flat is provided for footrest. The spring is mounted on 5mm thick plate. And the stand for support is made out of 40 NB pipe.

Spring rider whale The area : 1 m x 0.5 m Safe play area : 2 m x 1.5 m Rec. Age : 3-6 yrs. The spring rider being a whale provides an unlimited fun to the children riding on it. The whale is made out from fiber reinforced plastic (FRP). The handles provided for gripping is made up of 15 NB GI pipes. The whale is mounted on a pair of heavy-duty compression spring. Also a GI flat is provided for footrest. The spring is mounted on 5mm thick plate. And the stand for support is made out of 40 NB pipe.

MULTI ACTIVITY PLAY SYSTEM : MAPS 06 Area : 9m x 7m Safe area : 10m x 8m Sq. Deck 7’ ht with window canopy : The platform is made in FRP/roto. The top of platform is anti-skid surface with multi colored, pigmented resin. The back coat of fiber-reinforced plastic is such that the mat strands are not visible and the surface is tack free. At the top of the deck there is a window canopy is made in FRP/roto of 1-2 mm thick which provides shade to the children playing on it. There is an FRP/roto slide entry to go on the roller slide. Roller slide 7’ ht : In the roller slide the rollers are made up of HDPE with uv stabilized pigment of 2.5 mm thickness provided with nylon bush and are mounted on 12 mm dia rod and are fixed inside the slide chute. Spiral slide 7’ ht : The spiral slide chute is made of FRP/roto having shell thickness of 5-6 mm. The center support of the spiral slide is made from 100 NB GI pipes / ‘a’ class pipes. The supports for landing are made up of 20 NB GI pipes / ‘a’ class pipes. The railing is made up of LLDPE/HDPE in roto molding process. It is supported by 20 NB GI pipes / ‘a’ class pipes. The support pipe is powder coated to avoid rusting of the pipe. Rock scrambler 7’ ht : The rock scrambler is made up of FRP/roto (FRP/roto). The rocks are molded on same platform and it has gradient from the ground. The scrambler is supported by 25 NB pipe at the bottom for ground support. FRP/roto bridge 8’ long : The FRP/roto bridge is made from FRP/roto of 4 – 5 mm thickness. The railing is made from roto molding process with support of 20 NB GI pipes / ‘a’ class pipes. The roto railings are attached to the 20 NB GI pipes / ‘a’ class pipes with the help of 80 NB and 80x20 NB nylon clamps. Loop rung : The frame of the loop rung is fabricated out of 40 NB and 25 NB powder coated GI pipes / ‘a’ class pipes respectively. The triangular loops are made from 15 NB GI pipes / ‘a’ class pipes, which are welded to the top pipe of the frame. The top pipe is made out of 80 NB GI pipes / ‘a’ class pipes. The ladder used is attached to the side support pipe itself. Vertical loop scrambler : The vertical loop scrambler is made of 25 NB GI pipes / ‘a’ class pipes with a center support of 40 NB GI pipes / ‘a’ class pipes . The scrambler is attached to the platform with an ms flat of 25x10 with the help of nut-bolts. Double swing: The leg support of double swing are made up of 150 NB while the top bar is of 50 NB GI pipes / ‘a’ class pipes. The GI pipes / ‘a’ class pipes are powder coated. The swing seats are made from 10 mm thick antiskid chequered reinforced rubber which is suspended with rubber, coated GI chain. The ball bearings are mounted inside a specially designed nylon clamp. Bubble panel : The bubble panel is provided for the decks for safety purpose is made up of LLDPE/HDPE in roto molding process. It is supported by 20 NB GI pipes / ‘a’ class pipes which are clamped to the vertical support pipe. The support pipe is powder coated to avoid rusting. Ladder 7’ ht : The ladder is made up of 20 NB & 25 NB GI pipes / ‘a’ class pipes respectively and triangular steps are made up of 16 SWG GI pipes / ‘a’ class pipes. The ladder has sufficient reinforcement to maintain strength and avoid bending.

MULTI ACTIVITY PLAY SYSTEM : MAPS 07 Area : 6m x 6m Safe area : 7m x 7m Hex deck with 5’ht with canopy: The platform is made up of FRP/roto with anti-skid surface. The platform will be powder coated. The platform should be of regular hexagonal shape. The top canopy is made of FRP/roto with a minimum thickness of 2-3 mm. The canopy is assembled from six modules and at the top of it a dome is fixed. FRP/roto ladder 5’ ht: The ladder is made up of FRP/roto with a conservative thickness of 4 mm. The ladder has a sufficient reinforcement to maintain strength and avoid bending. The top surface of the ladder is such that it should not deserve any kind of skiddy movement. Roller slide 5’ ht: In the roller slide the rollers are made up of HDPE with uv stabilized pigment of 2.5 mm thickness provided with nylon bush and are mounted on 12 mm dia. Rod and fix in slide chute. The frame of the slide is made from 50x50x5 ms angle and handrail is 25 NB GI pipes / ‘a’ class pipes. The landing support is made from 25 NB pipes. Spiral slide 5’ ht : The spiral slide chute is made of FRP/roto having shell thickness of 5-6 mm. The center support of the spiral slide is made from 100 NB GI pipes / ‘a’ class pipes. The supports for landing are made up of 20 NB GI pipes / ‘a’ class pipes. The railing is made up of LLDPE/HDPE in roto molding process. It is supported by 20 NB GI pipes / ‘a’ class pipes. The support pipe is powder coated to avoid rusting of the pipe. Roto railing: Railing is provided for all the decks for safety purpose. It is made up low-density polyethylene plastic in rotational mould process and has a support of 20 NB powder coated GI pipes / ‘a’ class pipes. The railing is attached to the support pipe using a nylon clamp. Double swing: In the double swing the leg support is made up of 40 NB GI pipes / ‘a’ class pipes and top pipe is of NB GI pipes / ‘a’ class pipes. The swing seat is made up of 10 mm thick rubber belt. The belt seat is affixed on 6 mm rubber coated GI chain. The ball bearings are mounted inside a specially designed nylon clamp. There is a FRP/roto butterfly on the top of the double swing stand. Spiral scrambler: The spiral scrambler fabricated out of 25 NB GI pipes / ‘a’ class pipes. The spiral structure is suitably bent and is kept standing with vertical 40 NB GI pipes / ‘a’ class pipes support.

MULTI ACTIVITY PLAY SYSTEM : MAPS 25 Area : 4.96 m x 8.80 m Safe play area: 6.96 m x 10.8 m Square deck 1.16 m x 1.16 m with canopy (1.5 m) : The platform shall be made up of GI coated ms sheet / fiber reinforced plastic with anti skid surface. The platform will be powder coated. Each of the side should be equal in length. The top canopy shall be made of fiber reinforced plastic with a minimum thickness of 2-3 mm. At the top a dome is fixed. Double slide with slide entry (1.5 m) : The double slide chute with top entry module shall be made up of 4 mm thick fiber reinforced plastic with self pigmented. The chute has its end such as it causes safe landing of the child. The landing portion should be in horizontal with respect to the ground. There should be support provided made up of 25 NBGI pipe. Crawling lane (2.1 m) : It is a pipe shaped module of specific diameter made from fiber reinforced plastic of 4 mm thickness. Spiral slide (1.5 m) : Spiral slide chute is made of fiber reinforced plastic having shell thickness of 4 mm. The back slide of the slides is surface mat with platform effect slide is supported on 100 NB center GI pipe. Landing module is supported by 15 NB pipe Ladder (1.5 m) : The ladder is made from fiber reinforced plastic of 4 – 5 mm thickness, self pigmented. Ladder should have reinforcement to maintain strength and avoid bending. The top surface of the ladder should be such that it should not deserve any kind of skiddy movement RaiNBow ladder (1.5 m) : The raiNBow shaped ladder shall be made up of powder coated GI pipe. The frame is made from 25 NBGI pipe with 20 NBGI pipe for support. The top surface of the ladder should be such that it should not deserve any kind of skiddy movement. The side railing is of fancy curve shape. Two seater arch swing : The two swings are made up of 10mm thick. Skid chequered reinforced rubber top, which is suspended with 6 mm rubber coated g.i chain. The ball bearings are mounted inside a specially designed nylon clamp. The side frame is of 80 NBGI pipe and top bar is of 50 NBGI pipe. Cross-n-zero : This item provides brain washing experience to the children and enhances their tactical strength by providing them a intelligent game. The prisms for the “x” and “o” of this item are made out of moulded plastic while the frame of it is made out of 20 NB and 15 NBGI pipes. Roto seat : These seats are made up of low linear density polyethylene on rotational process. C handle attachment assembly : It is made from 20 NBGI pipe. The pipe is powder coated to avoid rusting. Ball railing assembly : The balls for this item are made out of moulded plastic HDPE while the frame of it is made out of 25 NBGI pipes. The frame is powder coated. The balls are attached with 12 NB pipe to the frame. Slim railing assembly : These railings are made up of HDPE (high density polyethylene). It is supported by 20 NB powder coated GI pipe. Cross chequered railing assembly : It is made up linear low-density poly porethylene plastic with uv stabilized pigment from rotation process. The railing is designed in cross- chequered pattern. Bubble railing assembly : It is made up linear low-density poly porethylene plastic with uv stabilized pigment from rotation process. The dome made up of transparent acrylic is mounted on the panel. This feature GIves children the joy of viewing through glass.

MULTI ACTIVITY PLAY SYSTEM : THEME 06 Area : 9m x 7m Safe area : 10m x 8m Square deck 7’ ht with window canopy : The platform is made in fiber reinforced plastic. The top of platform is anti skid surface with multi colored, pigmented resin. The back coat of fiber-reinforced plastic is such that the mat strands are not visible and the surface is tack free. At the top of the deck there is a window canopy is made in FRP/roto of 1-2 mm thick which provides shade to the children playing on it. There is an FRP/roto slide entry to go on the roller slide. Roller slide 7’ ht : In the roller slide the rollers are made up of HDPE with uv stabilized pigment of 2.5 mm thickness provided with nylon bush and are mounted on 12 mm dia rod and are fixed inside the slide chute. Spiral slide 7’ ht : The spiral slide chute is made of fiber reinforced plastic with a shell thickness of 4 mm. The back side of the slide has a surface mat with platform effect. The slide center support is made up of 100 NB GI pipes / ‘a’ class pipes. The landing module is supported by 20 NB pipe. Rock scrambler 7’ ht : The rock scrambler is made up of fiber reinforced plastic (FRP/roto). Rocks are molded on same platform and it has gradient from the ground. The scrambler is supported by 25 NB pipe at the bottom for ground support. FRP/roto bridge 8’ long : The FRP/roto bridge is made from fiber reinforced plastic of 4 – 5 mm thickness. It has railing made from roto molding process with support of 20 NB GI pipes / ‘a’ class pipes. The roto railings are attached to the 20 NB GI pipes / ‘a’ class pipes with the help of 80 NB and 80x20 NB nylon clamps. Loop rung : The frame of the loop rung is fabricated out of 40 NB and 25 NB powder coated GI pipes / ‘a’ class pipes respectively. There are nine triangular loops made from 15 NB GI pipes / ‘a’ class pipes, which are welded to the top pipe of the frame. The top pipe is made out of 80 NB GI pipes / ‘a’ class pipes. The ladder used is designed to the side support pipe itself. At the top pipe a butterfly is welded which is made in FRP/roto with 2-3 mm thickness. Vertical loop scrambler : The vertical loop scrambler is made of 25 NB GI pipes / ‘a’ class pipes with a center support of 40 NB GI pipes / ‘a’ class pipes with powder coating done on it. The scrambler is attached to the platform with an ms flat of 25x10 with the help of nut-bolts. Character railings : The character railings are made in roto molding process. The character railings are attached to each other with the help of 20 NB GI pipes / ‘a’ class pipes. The pipes are powder coated in order to avoid rusting. FRP/roto reindeer / flower : The reindeer e is made from FRP/roto. The flowers are also made in FRP/roto and fixed to the deck with the help of 20 NB GI pipes / ‘a’ class pipes. Double swing with bucket seat: In the double swing the leg support is made up of 40 NB GI pipes / ‘a’ class pipes and top pipe is of 50 NB GI pipes / ‘a’ class pipes with GI junction box with powder coating. The swing seat is made up of 3-4 mm thick LLDPE/HDPE in roto moulding process. The bucket seat is affixed on 10 mm thk rope. The ball bearings are mounted inside a specially designed nylon clamp. Bubble panel :- The bubble panel is provided for the decks for safety purpose is made up of LLDPE/HDPE in roto molding process. It is supported by 20 NB GI pipes / ‘a’ class pipes which are clamped to the vertical support pipe. The support pipe is powder coated to avoid rusting.

MPPS 4 Square Deck - 1.5 MTR The platform shall be made up of Fiber Reinforced Plastic ( FRP ) 6 to 8 mm thickness with anti skid surface. Platform of each side should be equal in length 1.0m x 1.0m.. The platform 4 Nos. support with 80 mm GI pipe. Top railing made up of 20mm G.I. pipes, Braising Square frame shall be made from 40 x 40 x 5 mm thickness MS angle, Total area required for Square deck 1.0 x 1.0 Mtr. Platform support pipe and Braising frame shall be powder coated. Square Roof Square Canopy shall be made of single mould Fiber Reinforced Plastic ( FRP ) with thickness of 2-3 mm. Size of Canopy 1500mm x 1500mm Height 800mm FRP Step Ladder - 1.5 MTR The attractive Ladder chute shall be made from Fiber Reinforced Plastic (FRP) of 7 to 8mm Thickness. The chute has Non Skid gel coat finished. The hand railing made of 30mm & 25mm GI Pipes. Railing shall be powder coated or PU painted. FRP Spiral Slide - 1.5 MTR The Spiral slide shall be made of Fiber Reinforced Plastic having thickness of 6 to 8mm. Slide Centre support shall be 80 mm GI pipe landing module shall be supported by 20 mm GI pipe. Slide extension platform shall be made from Fiber Reinforced Plastic (FRP). The railing shall be made from 25 mm and 20 mm GI pipe. All pipes shall be powder coated or PU painted. Rock Scrambler - 1.5 MTR The rock climber shall be made of Fiber Reinforced plastic (FRP) of 6 to 7mm thick. Suspension Bridge - 2.9 MTR The Suspension Bridge shall be made of 10mm Thick tested chain link & FRP Steps, Steps made of 25 x 25 x 5 MS angle with 6mm FRP. Top Bar 40mm GI Pipe. The railing shall be made from 25mm & 20mm GI Pipes, All Pipe & frame shall be powder coated or PU painted. Rubber Net Climber - 1.5 MTR The Net climber made for challenge climbing shall be made up of Natural Rubber moulded with 6mm tested chain link, 400mm Length. & 30mm Diameter moulded rubber joint each other with MS Clamp. Clamp shall be powder coated. FRP Deluxe Wave Slide - 1.5 MTR. The Deluxe Wave slide shall be made of Fiber Reinforced Plastic (FRP) of 8 mm thickness both side gel coat finished. The Slide shape should be made of proper degree for safety sliding End support shall be made from 25 mm MM GI pipe. Double See Saw Lever 40mm GI pipe, handle made of 20mm GI Pipes, Stand made of 50mm GI Pipes & angle frame for foundation with lubricating Bush Roto Railing The railing shall be made from Blow moulding and shall be supported by 20 mm GI pipe and clamped with 80 mm nylon clamp. All pipes shall be powder coated to avoid rusting.

MPPS 18 Square Deck - 1.5 MTR The platform shall be made up of Fiber Reinforced Plastic ( FRP ) 6 to 8 mm thickness with anti skid surface. Platform of each side should be equal in length 1.0m x 1.0m.. The platform 4 Nos. support with 80 mm GI pipe. Top railing made up of 20mm G.I. pipes, Braising Square frame shall be made from 40 x 40 x 5 mm thickness MS angle, Total area required for Square deck 1.0 x 1.0 Mtr. Platform support pipe and Braising frame shall be powder coated. Square Roof Square Canopy shall be made of single mould Fiber Reinforced Plastic ( FRP ) with thickness of 2-3 mm. Size of Canopy 1500mm x 1500mm Height 800mm. FRP Deluxe Wave Slide - 1.5 MTR. The Deluxe Wave slide shall be made of Fiber Reinforced Plastic (FRP) of 8 mm thickness both side gel coat finished. The Slide shape should be made of proper degree for safety sliding End support shall be made from 25 mm MM GI pipe. Double Toddler Swing 50mm GI pipe is used as top bar having 2 Nos of Connecting Bush & special design clamps assembly, Vertical frame made up 40mm GI Pipes. chain of 6mm dia, Seat FRP Bucket. Arch Scrambler - 1.5 MTR The Arch Scrambler shall be made of 50 x 10 MS flat and 30mm GI Pipes with 25mm GI Pipes Steps, The Side Railing shall be made of 25mm GI Pipe. All Scarmblers shall be powder coated or PU painted. FRP Plain Bridge – 2.4 MTR The Platform shall be made of Fiber Reinforced Plastic (FRP) with anti skid Gel coat finish 6mm thick & M. S. Angle frame 40 x 40 x 5 The railing shall be made from 25mm & 20mm GI Pipes, All railing pipe shall be powder coated or PU painted. & made up of High Density Polyethylene Plastic (HDPE) FRP Spiral Slide - 1.5 MTR The Spiral slide shall be made of Fiber Reinforced Plastic having thickness of 6 to 8mm. Slide Centre support shall be 80 mm GI pipe landing module shall be supported by 20 mm GI pipe. Slide extension platform shall be made from Fiber Reinforced Plastic (FRP). The railing shall be made from 25 mm and 20 mm GI pipe. All pipes shall be powder coated or PU painted. FRP Step Ladder - 1.5 MTR The attractive Ladder chute shall be made from Fiber Reinforced Plastic (FRP) of 7 to 8mm Thickness. The chute has Non Skid gel coat finished. The hand railing made of 30mm & 25mm GI Pipes. Railing shall be powder coated or PU painted. Double Swing - STD 80MM Pipe 50mm GI pipe is used as top bar having 2 Nos of Connecting Bush & special design clamps assembly. Vertical frame made up 80mm GI Pipes. Plastosol coated short link chain of 6mm dia, Seat rubber with Non Skid surface with nylon lining pattern. Roto Railing The railing shall be made from Blow moulding and shall be supported by 20 mm GI pipe and clamped with 80 mm nylon clamp. All pipes shall be powder coated to avoid rusting.

MPPS THEME 08 HEXAGONAL DECK HT.1.5 MTR (MPPS) (1 NO) :- The platform shall be made up of Fiber Reinforced Plastic (FRP) 6 to 8 mm thickness with anti skid surface. Platform Diameter 2 Mtr. The platform 6 Nos. support with 80 mm GI pipe. Top railing made up of 20mm G.I. pipes, Braising Hexagonal frame shall be made from 40 x 40 x 5 mm thickness MS angle, Total area required for Hexagonal deck 2 x 2 Mtr. Platform support pipe and Braising frame shall be powder coated. Platform inside 40 x 40 x 5 mm thickness MS angle Frame. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. HEXAGONAL ROOF (MPPS) (1 NO) :- The hexagonal canopy Triangular part is made up of Fiberglass Reinforced Plastic 3mm thick. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. ROTO ROCK SCRAMBLER HT.1.5 MTR (MPPS) (1 NO) :- Roto Rock Scrambler shall be made up of 5mm to 6 thick Roto Moulding LLDPE. Ground support for the Scrambler shall be made of 25 mm B CLASS GI pipe of Reputed Brand like Tata/Zenith/Bhushan/GST. To be Fitted S.S. (Non Rusting) Nut Bolt 10mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. FRP ROLLER SLIDE HT.1.5 MTR (MPPS) (1 NO) :- The exciting roller slide is made up of Fibreglass Reinforced Plastic. The most attractive and enjoyable of its kind, the chute of this slide consists of molded plastic rollers spreaded over the length. Rollers are made up of HDPE with UV stabilized pigment.The platform shall be made up of Fiber Reinforced Plastic ( FRP ) 6 to 8 mm thickness with anti skid surface. Platform of each side should be equal in length 1.0m x 1.0m. All Pipes shall be powder coated. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. ROTO SPIRAL SLIDE HT.1.5 MTR (MPPS) (1 NO) :- The spiral slide chute is made up of 6mm thick Roto Mould of 6 to 8 mm thickness LLDPE (Low linear Density Poly Ethylene). Slide is supported on 80 mm center support GI pipe. The platform shall be made up of LLDPE (Low linear Density Poly Ethylene) 6 to 8 mm thickness with anti skid surface. Platform on each side should be equal in length 1.0m x 1.0m. The platform is supported by 4 Nos. Vertical 80 mm powder coated GI pipes. Railing is provided to the platform and is made from low-density polyethylene, supported by 20 mm GI pipe with nylon Clamp. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. ROTO STRAIGHT JOINING SLIDE HT.1.5 MTR (MPPS) (1 NO) :- The module is made up of LLDPE plastic. The inside dimension of the slide will be 420 mm. The length of the slide will be 10 ft 1 inch. This is a double wall slide. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. SPRING SCRAMBLER HT.1.5 MTR (MPPS) (1 NO) :- Spring Scrambler Centre Support made out of 50mm GI Pipes, The spring fabricated out of 25mm GI Pipe; Spring Diameter shall be 750mm. All Structure shall be powder coated or PU painted. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. ROTO LADDER HT.1.5 MTR (MPPS) (1 NO) :- The attractive Ladder chute shall be made from Low Linear Density Poly Ethylene (LLDPE) of 7 to 8mm Thickness. The chute has Non Skid gel coat finished. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. KIDDIES BENCH (MPPS) (2 NOS) :- This small kiddie’s bench is prepared in rotational moulding and made in linear low density polyethylene. It can accommodate 2 kids comfortably at a time. This bench can be used anywhere in the house or in the garden, as it is a lightweight but more useful product. CROSS-N-ZERO BELOW DECK (MPPS) (1 NOS) :- This item provides brain-refreshing experience to the children and enhances their tactical strength by providing them an intelligent game. The prisms for the ‘X’ and ‘O’ of this item are made of blow moulded plastic. The prisms are fixed on a powder coated GI frame of 25 mm and 15 mm GI pipes. and clamped with 80 mm nylon clamp made with 66 nylon Material. All pipes shall be powder coated to avoid rusting. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. FLOWER (MPPS) (1 NO) :- This item shall be completely made with Blow Moulding of 3 mm thickness. MS Frame with G I Pipe Fabricted mounting Nylon Clamp made with 66 nylon Material. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. BUTTERFLY (MPPS) (1 NO) :- This item shall be completely made with Blow Mould of 3-4 mm thickness. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material.

ROTO MPPS 01 SQUARE DECK HT.1.5 MTR (MPPS) (1 NO) :- The platform shall be made up of Fiber Reinforced Plastic (FRP) 6 to 8 mm thickness with anti skid surface. Platform of each side should be equal in length 1.0m x 1.0m. The platform 4 Nos. support with 80 mm GI pipe. Top railing made up of 20mm G.I. pipes, Braising Square frame shall be made from 40 x 40 x 5 mm thickness MS angle, Total area required for Square deck 1.0 x 1.0 Mtr. Platform support pipe and Braising frame shall be powder coated. Platform inside 40 x 40 x 5 mm thickness MS angle Frame. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. ROTO SQUARE ROOF (MPPS) (1 NOS) :- Tile Canopy made of Roto Mould 4 to 5 mm Thickness with anti skid surface. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. SPRING SCRAMBLER HT.1.5 MTR (MPPS) (1 NO) :- Spring Scrambler Centre Support made out of 50mm GI Pipes, The spring fabricated out of 25mm GI Pipe; Spring Diameter shall be 750mm. All Structure shall be powder coated or PU painted. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. ROTO ROCK SCRAMBLER HT.1.5 MTR (MPPS) (1 NO) :- Roto Rock Scrambler shall be made up of 5mm to 6 thick Roto Moulding LLDPE. Ground support for the Scrambler shall be made of 25 mm B CLASS GI pipe of Reputed Brand like Tata/Zenith/Bhushan/GST. To be Fitted S.S. (Non Rusting) Nut Bolt 10mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. FRP SPIRAL SLIDE HT.1.5 MTR (MPPS) (1 NO) :- The spiral slide chute is made up of 6mm thick Fiber reinforced plastic 6 to 8 mm thickness /LLDPE (Low linear Density Poly Ethylene). Slide is supported on 80 mm center support GI pipe. The platform shall be made up of Fiber reinforced plastic (FRP) 6 to 8 mm thickness with anti skid surface. Platform on each side should be equal in length 1.0m x 1.0m. The platform is supported by 4 Nos. Vertical 80 mm powder coated GI pipes. Railing is provided to the platform and is made from low-density polyethylene, supported by 20 mm GI pipe with nylon Clamp. Ladder is made up of 25 mm GI pipe having railing of 20 mm. There are triangular steps 16 SWG GI sheet. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. FRP DELUXE PLAIN SLIDE HT.1.5 MTR (MPPS) (1 NO) :- The Deluxe Plain slide shall be made of Fiber Reinforced Plastic (FRP) of 8 mm thickness both side gel coat finished. The Slide shape should be made of proper degree for safety sliding. Centre Support of slide 25mm G.I. Pipe, End support shall be made from 25 mm GI pipe. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material.

MPPS THEME 09 OCTAGONAL DECK HT.1.5 MTR (MPPS) (1 NO) :- The platform shall be made up of Fiber Reinforced Plastic (FRP) 6 to 8 mm thickness with anti skid surface. Platform Diameter 2.4 Mtr. The platform 8 Nos. support with 80 mm GI pipe. Top railing made up of 20mm G.I. pipes, Braising Octagonal frame shall be made from 40 x 40 x 5 mm thickness MS angle, Total area required for Octagonal deck 2.4 x 2.4 Mtr. Platform support pipe and Braising frame shall be powder coated. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. HEXAGONAL DECK HT.1.0 MTR (MPPS) (1 NO) :- The platform shall be made up of Fiber Reinforced Plastic (FRP) 6 to 8 mm thickness with anti skid surface. Platform Diameter 2 Mtr. The platform 6 Nos. support with 80 mm GI pipe. Top railing made up of 20mm G.I. pipes, Braising Hexagonal frame shall be made from 40 x 40 x 5 mm thickness MS angle, Total area required for Hexagonal deck 2 x 2 Mtr. Platform support pipe and Braising frame shall be powder coated. Platform inside 40 x 40 x 5 mm thickness MS angle Frame. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. HEXAGONAL ROOF (MPPS) (1 NO) :- The hexagonal canopy Triangular part is made up of Fiberglass Reinforced Plastic 3mm thick. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. BAMBOO CANOPY (MPPS) (1 NO) :- The Bamboo Canopy is made up by bi-axial rotational moulding process with the wall thickness of 2/3mm with UV stabilized Linear Low Density Polyethylene material. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. BRIDGE LADDER (MPPS) (1 NO) :- Frame made from 40mm GI Pipes & Steps 25mm GI Pipes. All Pipe & frame shall be powder coated or PU painted. The ladder used shall be designed to the side support pipe itself attached with Nylon Clamp. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. ROTO CURVE JOINING SLIDE HT.1.0 MTR (MPPS) (1 NO) :- The slide shall be made of Roto Moulded LLDPE. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted S.S. (Non Rusting) Nut Bolt 10mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. DOUBLE SWING ECO (MPPS) (1 NO) :- 50mm GI pipe is used as top bar having 1 No of Connecting junction Box 2 Nos of Leg support made up 40mm GI Pipes clamps assembly noiseless and Smooth movement to the swing round Plastosol coated short link chain of 6mm dia which can carry to hanging belt seat. Seat rubber with Non Skid surface with nylon lining is pattern. Triangular hook are moulded in belt in such a way that it would not project from the top surface of the belt Seats. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. CROSS-N-ZERO (MPPS) (1 NO) :- This item provides brain-refreshing experience to the children and enhances their tactical strength by providing them an intelligent game. The prisms for the ‘X’ and ‘O’ of this item are made of blow moulded plastic. The prisms are fixed on a powder coated GI frame of 25 mm and 15 mm GI pipes. and clamped with 80 mm nylon clamp made with 66 nylon Material. All pipes shall be powder coated to avoid rusting. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. BUBBLE PANEL (MPPS) (2 NOS) :- The frame of the bubble shall be made up FRP/ LLDPE (Low linear Density Poly Ethylene). The dome made up of transparent acrylic or Fiber Reinforced Plastic shall be mounted on the panel. This feature gives children the joy of viewing through glass. The railing shall be supported by 20 mm GI pipe and clamped with 80 mm nylon clamp made with 66 nylon Material. All pipes shall be powder coated to avoid rusting. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. FRP STEP LADDER HT.1.0 MTR (MPPS) (1 NO) :- The Ladder chute shall be made from Fiber Reinforced Plastic (FRP) / Low Linear Density Poly Ethylene (LLDPE) only of 7 to 8mm Thickness. The chute has Non Skid finished. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted S.S. (Non Rusting) Nut Bolt 10 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. LOLLIPOP SCRAMBLER (MPPS) (1 NO) :- The lollipop Scrambler shall be made of 50 x 10 MS flat and 50mm GI Pipes with 43mm GI Pipes Steps with ball shape welded. All Scramblers shall be powder coated or PU painted. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. ROTO SPIRAL SLIDE HT.1.5 MTR (MPPS) (1 NO) :- The spiral slide chute is made up of 6mm thick Roto Mould of 6 to 8 mm thickness LLDPE (Low linear Density Poly Ethylene). Slide is supported on 80 mm center support GI pipe. The platform shall be made up of LLDPE (Low linear Density Poly Ethylene) 6 to 8 mm thickness with anti skid surface. Platform on each side should be equal in length 1.0m x 1.0m. The platform is supported by 4 Nos. Vertical 80 mm powder coated GI pipes. Railing is provided to the platform and is made from low-density polyethylene, supported by 20 mm GI pipe with nylon Clamp. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. UPHILL SCRAMBLER HT.1.5 MTR (MPPS) (1 NO) :- The Snake Scrambler shall be made of 50 x 10 MS flat and 30mm GI Pipes with 20mm GI Pipes Steps. All Scramblers shall be powder coated or PU painted. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. ROTO ROCK SCRAMBLER HT.1.5 MTR (MPPS) (1 NO) :- Roto Rock Scrambler shall be made up of 5mm to 6 thick Roto Moulding LLDPE. Ground support for the Scrambler shall be made of 25 mm B CLASS GI pipe of Reputed Brand like Tata/Zenith/Bhushan/GST. To be Fitted S.S. (Non Rusting) Nut Bolt 10mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. ROTO DOUBLE WAVE SLIDE HT.1.5 MTR (MPPS) (1 NO) :- Roto wave slide is made up of specially formulated food grade LLDPE mixed with UV stabilizer & antioxidants to protect it from UV rays & its effects & to prevent oxidization respectively. The chute has its end such as it causes safe landing of the child. The landing portion should be in horizontal with respect to the ground. There should be support provided made up of 25 NB GI pipe. This is a double wall. slide. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. CROSS CHEQUERED RAILING (MPPS) (2 NOS) :- The railing shall be made from FRP (Fiber Reinforced Plastic) / LLDPE (Low linear Density Poly Ethylene) and shall be supported by 20 mm NB GI pipe and clamped with 80 mm NB and 80 (mm) x 20(mm) nylon clamp. All pipes shall be powder coated to avoid rusting. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. FRP TOP RAMP LT.2.4 MTR (MPPS) (1 NO) :- The Platform shall be made of Fiber Reinforced Plastic (FRP) with anti skid Gel coat finish 6mm thick & M. S. Angle frame 40 x 40 x 5 The railing shall be made from 25mm & 20mm GI Pipes, All railing pipe shall be powder coated or PU painted. The railing shall bemade from FRP (Fiber Reinforced Plastic) / LLDPE (Low linear Density Poly Ethylene) and shall be supported by 20 mm NB GI pipe and clamped with 80 mm NB and 80 (mm) x 20(mm) nylon clamp made with 66 nylon Material. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. SPLIT LEVEL LADDER (MPPS) (1 NO) :- The Frame of split level Ladder made 25mm MM GI Pipes & 20mm MM GI Pipes and clamped with 80 mm nylon clamp. All pipes shall be powder coated to avoid rusting. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. FLAG (MPPS) (1 NO) :- This item shall be fabricated of 16 SWG GI sheet /ROTO MOULD / FRP and vertical support 15 mm NB GI’ B’ class pipe and 4mm thick of MS plate. This item shall be fitted on cone canopy. Complete item shall be powder coated to avoid rusting. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. SLIDE HOOD (MPPS) (1 NO) :- Slide Hood are made of roto moulded plastic is low-density polyethylene in rotational moulding. The hood is fixed on a powder coated GI Pipe of 20 mm. and clamped with 80 mm nylon clamp. All pipes shall be powder coated to avoid rusting. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. DOUBLE SLIDE HOOD (MPPS) (1 NO) :- Slide Hood are made of roto moulded plastic is low-density polyethylene in rotational moulding. The hood is fixed on a powder coated GI Pipe of 20 mm. and clamped with 80 mm nylon clamp. All pipes shall be powder coated to avoid rusting. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. FLOWER (MPPS) (2 NOS) :- This item shall be completely made with Blow Moulding of 3 mm thickness. MS Frame with G I Pipe Fabricted mounting Nylon Clamp made with 66 nylon Material. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. BUTTERFLY (MPPS) (2 NOS) :- This item shall be completely made with Blow Mould of 3-4 mm thickness. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. LEAF (MPPS) (2 NOS) :- FF theaming shall be attractive, it shall be made of FRP (Fiber Reinforced Plastic) / LLDPE (Low linear Density Poly Ethylene) with thickness of 2 mm. Character. Attached this theaming on Deck pipe anywhere for specially children attraction. MONKEY (MPPS) (1 NO) :- The Monkey is made up by bi-axial rotational moulding process with the wall thickness of 2/3mm with UV stabilized Linear Low Density Polyethylene material.

ROTO MPPS 02 SQUARE DECK HT.1.5 MTR (MPPS) (2 NOS) :- The platform shall be made up of Fiber Reinforced Plastic (FRP) 6 to 8 mm thickness with anti skid surface. Platform of each side should be equal in length 1.0m x 1.0m. The platform 4 Nos. support with 80 mm GI pipe. Top railing made up of 20mm G.I. pipes, Braising Square frame shall be made from 40 x 40 x 5 mm thickness MS angle, Total area required for Square deck 1.0 x 1.0 Mtr. Platform support pipe and Braising frame shall be powder coated. Platform inside 40 x 40 x 5 mm thickness MS angle Frame. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. ROTO SQUARE ROOF (MPPS) (2 NOS) :- Tile Canopy made of Roto Mould 4 to 5 mm Thickness with anti skid surface. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. ROTO SPIRAL SLIDE HT.1.5 MTR (MPPS) (1 NO) :- The spiral slide chute is made up of 6mm thick Roto Mould of 6 to 8 mm thickness LLDPE (Low linear Density Poly Ethylene). Slide is supported on 80 mm center support GI pipe. The platform shall be made up of LLDPE (Low linear Density Poly Ethylene) 6 to 8 mm thickness with anti skid surface. Weight of Roto Spiral is 70 KG. Platform on each side should be equal in length 1.0m x 1.0m. The platform is supported by 4 Nos. Vertical 80 mm powder coated GI pipes. Railing is provided to the platform and is made from low-density polyethylene, supported by 20 mm GI pipe with nylon Clamp. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. CROSS CHEQUERED RAILING (MPPS) (1 NO) :- The railing shall be made from FRP (Fiber Reinforced Plastic) / LLDPE (Low linear Density Poly Ethylene) and shall be supported by 20 mm NB GI pipe and clamped with 80 mm NB and 80 (mm) x 20(mm) nylon clamp. All pipes shall be powder coated to avoid rusting. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. PIPE LADDER HT.1.5 MTR (MPPS) (1 NO) :- It is made up of 25mm GI pipe side support. There are triangular steps of 16 SWG GI sheets. Railing made of 20mm GI Pipe. All Pipe & frame shall be powder coated. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. ROTO ROCK SCRAMBLER HT.1.5 MTR (MPPS) (1 NO) :- Roto Rock Scrambler shall be made up of 5mm to 6 thick Roto Moulding LLDPE. Ground support for the Scrambler shall be made of 25 mm B CLASS GI pipe of Reputed Brand like Tata/Zenith/Bhushan/GST. To be Fitted S.S. (Non Rusting) Nut Bolt 10mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. CROSS-N-ZERO (MPPS) (1 NO) :- This item provides brain-refreshing experience to the children and enhances their tactical strength by providing them an intelligent game. The prisms for the ‘X’ and ‘O’ of this item are made of blow moulded plastic. The prisms are fixed on a powder coated GI frame of 25 mm and 15 mm GI pipes. and clamped with 80 mm nylon clamp made with 66 nylon Material. All pipes shall be powder coated to avoid rusting. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. ROTO STRAIGHT JOINING SLIDE HT.1.5 MTR (MPPS) (1 NO) :- The module is made up of LLDPE plastic. The inside dimension of the slide will be 420 mm. The length of the slide will be 10 ft 1 inch. This is a double wall slide. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. SLIDE HOOD (MPPS) (1 NO) :- Slide Hood are made of roto moulded plastic is low-density polyethylene in rotational moulding. The hood is fixed on a powder coated GI Pipe of 20 mm. and clamped with 80 mm nylon clamp. All pipes shall be powder coated to avoid rusting. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. ARCH BRIDGE LT.2.4 MTR (MPPS) (1 NO) :- The Bridge made of 40mm GI pipes for support & FRP Arch Platform. Platform made of 25 x 25 x 5 MS angle with 6mm FRP top. Side railing shall be made from 25mm & 20mm GI Pipes with Roto Railing, All pipe shall be Powder coated or PU painted. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material.

MPPS 22 SQUARE DECK HT 2.1 MTR The platform shall be made up of Fiber Reinforced Plastic (FRP) 6 to 8 mm thickness with anti skid surface. Platform of each side should be equal in length 1.0m x 1.0m. The platform 4 Nos. support with 80 mm GI pipe. Top railing made up of 20mm G.I. pipes, Braising Square frame shall be made from 40 x 40 x 5 mm thickness MS angle, Total area required for Square deck 1.0 x 1.0 Mtr. Platform support pipe and Braising frame shall be powder coated. Platform inside 40 x 40 x 5 mm thickness MS angle Frame. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. SQUARE DECK HT 1.5 MTR The platform shall be made up of Fiber Reinforced Plastic (FRP) 6 to 8 mm thickness with anti skid surface. Platform of each side should be equal in length 1.0m x 1.0m. The platform 4 Nos. support with 80 mm GI pipe. Top railing made up of 20mm G.I. pipes, Braising Square frame shall be made from 40 x 40 x 5 mm thickness MS angle, Total area required for Square deck 1.0 x 1.0 Mtr. Platform support pipe and Braising frame shall be powder coated. Platform inside 40 x 40 x 5 mm thickness MS angle Frame. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. SQUARE ROOF Square Canopy shall be made of single mould Fiber Reinforced Plastic ( FRP ) with thickness of 2-3 mm. Size of Canopy 1500mm x 1500mm Height 800mm. HEXAGONAL DECK HT 1.5 MTR The platform shall be made up of Fiber Reinforced Plastic (FRP) 6 to 8 mm thickness with anti skid surface. Platform Diameter 2 Mtr. The platform 6 Nos. support with 80 mm GI pipe. Top railing made up of 20mm G.I. pipes, Braising Hexagonal frame shall be made from 40 x 40 x 5 mm thickness MS angle, Total area required for Hexagonal deck 2 x 2 Mtr. Platform support pipe and Braising frame shall be powder coated. Platform inside 40 x 40 x 5 mm thickness MS angle Frame. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. HEXAGONAL ROOF The hexagonal canopy Triangular part is made up of Fiberglass Reinforced Plastic 3mm thick. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. FRP DELUXE PLAIN SLIDE HT 2.1 MTR The Deluxe Plain slide shall be made of Fiber Reinforced Plastic (FRP) of 8 mm thickness both side gel coat finished. The Slide shape should be made of proper degree for safety sliding. Centre Support of slide 25mm G.I. Pipe, End support shall be made from 25 mm GI pipe. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. ROCK SCRAMBLER HT 2.1 MTR Rock Scrambler platform shall be made up of 5 mm to 6 thick FRP (Fiber Reinforced Plastic) / LLDPE (Low linear Density Poly Ethylene) / ROTO. Rocks shall be bolted on same platform and ground support for the platform 25 mm NB GI pipe 50 x 10 MS flat shall be used. All pipes, flat shall be powder coated to avoid rusting. S.S. (Non Rusting) Nut Bolt 10mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. Powder Coating 60 Micron with PP Powder. ARCH SCRAMBLER HT 2.1 MTR The Arch Scrambler shall be made of 50 x 10 MS flat and 30mm GI Pipes with 25mm GI Pipes Steps, The Side Railing shall be made of 25mm GI Pipe. All Scarmblers shall be powder coated or PU painted. SPLIT LEVEL PIPE LADDER The Frame of split level Ladder made 25mm MM GI Pipes & 20mm MM GI Pipes and clamped with 80 mm nylon clamp. All pipes shall be powder coated to avoid rusting. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. FRP TOP RAMP LT 3.0 MTR The Platform shall be made of Fiber Reinforced Plastic (FRP) with anti skid Gel coat finish 6mm thick & M. S. Angle frame 40 x 40 x 5 The railing shall be made from 25mm & 20mm GI Pipes, All railing pipe shall be powder coated or PU painted. The railing shall bemade from FRP (Fiber Reinforced Plastic) / LLDPE (Low linear Density Poly Ethylene) and shall be supported by 20 mm NB GI pipe and clamped with 80 mm NB and 80 (mm) x 20(mm) nylon clamp made with 66 nylon Material. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted using S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. LADDER HT 1.5 MTR The Ladder chute shall be made from Fiber Reinforced Plastic (FRP) / Low Linear Density Poly Ethylene (LLDPE) only of 7 to 8mm Thickness. The chute has Non Skid finished. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted S.S. (Non Rusting) Nut Bolt 10 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. FRP DELUXE WAVE SLIDE HT 1.5 MTR The Deluxe Wave slide shall be made of Fiber Reinforced Plastic (FRP) of 8 mm thickness both side gel coat finished. The Slide shape should be made of proper degree for safety sliding End support shall be made from 25 mm MM GI pipe. S.S. (Non Rusting) Nut Bolt 6 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. Powder Coating 60 Micron with PP Powder. CROSS & ZERO This item provides brain-refreshing experience to the children and enhances their tactical strength by providing them an intelligent game. The prisms for the ‘X’ and ‘O’ of this item are made of blow moulded plastic. The prisms are fixed on a powder coated GI frame of 25 mm and 15 mm GI pipes. and clamped with 80 mm nylon clamp made with 66 nylon Material. All pipes shall be powder coated to avoid rusting. S.S. (Non Rusting) Nut Bolt 6 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. Powder Coating 60 Micron with PP Powder. DOUBLE SWING STD 50mm GI pipe is used as top bar having 1 No of Connecting junction Box 2 Nos of Leg support made up 40mm GI Pipes clamps assembly noiseless and Smooth movement to the swing round Plastosol coated short link chain of 6mm dia which can carry to hanging belt seat. Seat rubber with Non Skid surface with nylon lining is pattern. Triangular hook are moulded in belt in such a way that it would not project from the top surface of the belt Seats. S.S. (Non Rusting) Nut Bolt 10/6 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. Powder Coating 60 Micron with PP Powder. SUSPENSION BRIDGE LT 2.9 MTR The Swinging Bridge shall be made of 10mm Thick tested chain link & FRP/LLDPE Steps, Steps made of 25 x 25 x 5 MS angle with 5 mm FRP/LLDPE. Top Bar 40mm GI Pipe. The railing shall be made from 25mm & 20mm GI Pipes, All Pipe & frame shall be powder coated or PU painted. The railing shall be made from FRP (Fiber Reinforced Plastic) / LLDPE (Low linear Density Poly Ethylene) and shall be supported by 20 mm NB GI pipe and clamped with 80 MM NB and 80 (mm) x 20(mm) nylon clamp made with 66 nylon Material. U nut 12 mm 4 Nos. S.S. (Non Rusting) Nut Bolt 10 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. Powder Coating 60 Micron with PP Powder. FRP SPIRAL SLIDE HT 1.5 MTR The spiral slide chute is made up of 6mm thick Fiber reinforced plastic 6 to 8 mm thickness /LLDPE (Low linear Density Poly Ethylene). Weight of Roto Spiral is 70 KG & FRP Spiral Slide is 80 KG. Slide is supported on 80 mm center support GI pipe. The platform shall be made up of Fiber reinforced plastic (FRP) 6 to 8 mm thickness with anti skid surface. Platform on each side should be equal in length 1.0m x 1.0m. The platform is supported by 4 Nos. Vertical 80 mm powder coated GI pipes. Railing is provided to the platform and is made from low-density polyethylene, supported by 20 mm GI pipe with nylon Clamp. Ladder is made up of 25 mm GI pipe having railing of 20 mm. There are triangular steps 16 SWG GI sheet. S.S. (Non Rusting) Nut Bolt 10 mm/ 8 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. Powder Coating 60 Micron with PP Powder. LOOP SCRAMBLER This shall be the kind of item that provides hanging experience to the children. The frame shall be fabricated out of 50 mm and 20 mm NB GI pipe. There shall be 09 triangular loops made from 15 NB, which shall be welded to the top pipe of the frame / Nylon Triangular Swinging Loops with high Quality 66 nylon Material. The top pipe shall be made out of 50/80 NB GI pipe. The ladder used shall be designed to the side support pipe itself. S.S. (Non Rusting) Nut Bolt 12 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. Powder Coating 60 Micron with PP Powder. FRP LADDER HT 1.5 MTR The Ladder chute shall be made from Fiber Reinforced Plastic (FRP) / Low Linear Density Poly Ethylene (LLDPE) only of 7 to 8mm Thickness. The chute has Non Skid finished. Powder Coating Thickness 70-75 Micron with PP Powder of Reputed Brand only. To be Fitted S.S. (Non Rusting) Nut Bolt 10 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. ROTO RAILING The railing shall be made from Blow moulding and shall be supported by 20 mm GI pipe and clamped with 80 mm nylon clamp. All pipes shall be powder coated to avoid rusting. S.S. (Non Rusting) Nut Bolt 6 mm & Nylon Lock Nut with Nylon Cap made with 66 nylon Material. Powder Coating 60 Micron with PP Powder.

AIR WALKER Air Walker made from C class GI Pipe. The center pipe is of 80mm NB made from C Class MS pipe, 32mm NB:- Air Walker pedal frame duly bend, 25mm NB:- Air Walker handle frame duly bend and the bottom support of M.S. round plate of 250 mm dia & 10mm thickness is welded at bottom. MS plate of 245 x 113 x 2.8mm :- Footrest support plate. The leg movement frame is of 40mm NB made from C Class MS pipe. The handle frame is of 25mm NB made from C Class GI pipe. The foundation used for fixing is consists of three equal items i.e. 80mm NB made from C Class GI pipe, M.S. Round Plate of 250 mm dia & 10mm thickness & 25 mm X 25mm M.S. angle of 3 mm thickness. MS pipe 48 x 48 x 2.8mm:- Footrest frame support. MS Angle 23 x 23 x 1.8mm:- Foundation support frame. MS Flat 48 x 9mm:- Foundation plate support. MS bright material:- Pins made of Dia.25mm. MS plate of 8mm:- Air Walker Pedal L-bend, support. 60mm dia seamless pipe:- Bushes. Bearings:- Permanent lubricated bearings 6205. Closing Caps made from top quality FRP material with 2 mm thickness. HDPE / LLDPE Plastic:- Closing cap, Air Walker Footrest. The pins used are made up of 25mm diameter bright bar. The bearings used be permanent lubricated sealed bearing of reputed make. The nut bolts used for assembly are made from S.S. material. The serclips used for assembly are of 25 mm diameter. The Gym Equipment shall be finished smooth with a primer coating of at least 40 micron followed by epoxy based Powder Coating with Polyester Powder Coating of at least 60 to 70 micron thickness using Exonobel / Berger make paints or its equivalent paints.

SKY WALKER • DIMENSIONS:- 1720MM (Length) X 630mm (Width) X 1750m. (Height) • SAFE AREA:- 2.7Mtr X 1.6Mtr. Sky Walker Equipment made from “C” class G.I Pipe of different NB. NB stands for Nominal Bore Sizes i.e Internal Diameter of pipe in millimetres. The main frame pipe is of 80mm NB made from “C” Class G.I Material which is blend at the radius of 250mm. The leg movement frame is of 50 X 50mm X 3mm thick CRC square pipe. Sleeves are made up of 100mm OD M.S. pipe with thickness 5mm. This results in easy replacement of bearings, pins and handle. The handle frame is of 25mm NB made from “C” Class G.I pipe. The foundation used for fixing is a structure and made from centre pipe of G.I. of 80 NB “C” class. Welded with M.S. round plate of Ø250mm & 10mm thick. Main pipe supported with 25mm X 25mm M.S. angles of 3mm thickness and 20mm X 40mm CRC Square pipes of 3mm thickness. Two foundations are provided for rigid support. The Footrests made from Aluminium casting material of size 130 X 310 X 5mm. Closing Caps are made up of high quality Fiber reinforced Plastic material. The pins used are made up of Ø25mm SAFE8620 bright material. Pins are fixed at the outer end with M8 grub screws and Dia.8mm SS ball. The bearings used are “6205zz are permanent lubricated sealed bearing of reputed brand. High tensile steel with galvanized nuts & bolts are used for assembly. The circlips used for assembly are of A24 type. The powder coating is done with Pure Polyester Powder of Ackzonoble or berger with 60 to 70 micron thickness.

CROSS TRAINER / ELLIPTICAL • DIMENSIONS:- 1320mm (Length) x 600mm (Width) x 1750mm. (Height). • SAFE AREA: - 1.77 x 1.2Mtr. Cross trainer equipment made from C Class G.I. Pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimetres. The main frame Pipes are of 80NB C Class G.I. Pipe with single bend pipe with 250mm radius. The bottom support of M.S. round plate of DIA 250 mm & 10mm thick. The Handle Frame is made up of 25NB C Class G.I. Pipe. The foundation used for fixing is a structure and made from centre pipe of G.I. of 80 NB C class welded with M.S. round plate of DIA 250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 32 NB GI Pipe. To build structure bushes are used which are made from M.S. seamless pipe of 60mm OD With 5 mm thickness. The footrests are made from CI (Cast Iron) /Injection Moulded Plastic LLDPE / HDPE. Closing Caps are made up of Injection Moulded Plastic LLDPE / HDPE /M.S. Pins used of Diameter 35mm, 25mm, and 17mm are made up from SAE 8620 bright. The Bearings used are of 6007 2RS1 62052RS1 and 62032RS1 permanent lubricated sealed bearing of reputed brand. High tensile steel with galvanized nuts and bolts are used for assembly. The Gym Equipment shall be finished smooth with a primer coating of at least 40 micron followed by epoxy based Powder Coating with Polyester Powder Coating of at least 60 to 70 micron thickness using Exonobel / Berger make paints or its equivalent paints. A 16, A 24 mm circlips are used for assembly. Bolt M8X16 mm and NY lock nut of M8 made of SS304 used on nylon cap mounted on pins to protect bearings and pins from rain and dust.

HORSE RIDER / AERO RIDER • DIMENSIONS:- 1180mm (Length) x 400mm (Width) x 1400mm. (Height). • SAFE AREA: - 2.2Mtr x 1.4Mtr. Horse rider equipment made from C class G.I. Pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimetres. The main frame of 100NB made from C Class G.I. pipes welded with M.S. round plate of DIA 250 mm & 10mm thick. Seat provided are made up of MS deep draw quantity of 2mm thickness with no joint with Uniform outer edge radius 20mm. The foundation used for fixing is a structure and made from centre pipe of G.I. of 80 NB C class Welded with M.S. round plate of DIA 250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. The leg movement frame is of 32NB made from C G.I. pipe. The handle frame is of 32 NB made from C Class G.I. pipe. The footrests are made from 25 NB C class G.I. pipe. Pins used of Diameter 17 mm are made up from SAE 8620 bright material. N The bearings used of 62032RS1 permanent lubricated sealed bearing of reputed brand. High tensile steel with galvanized nuts & bolts for assembly. The circlips used for assembly are of A24 mm. The Gym Equipment shall be finished smooth with a primer coating of at least 40 micron followed by epoxy based Powder Coating with Polyester Powder Coating of at least 60 to 70 micron thickness using Exonobel / Berger make paints or its equivalent paints.

LEG LIFT POST Product Area : 1.8 X 0.8 Mtr Safe Play Area : 2.8 x 1.8 Mtr The main frame of LEG LIFT POST is made up of 80 NB G.I. pipes. 6 no of spacer pipes made by 25 NB G.I pipes are arranged in parallel at equidistance to form a back rest of product. The paired handle pipe consists of 25NB galvanized pipe fixed at the top and bottom of 80NB support pipe main frame. All pipes are uniformly powder coated up to minimum 60 micron thickness to avoid corrosion. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment.

SHOULDER BUILDER DOUBLE / SHOULDER SPINNER DOUBLE • DIMENSIONS:- 900mm (Length) x 900mm (Width) x 1580mm (Height). • SAFE AREA:- 1.9Mtr X 1.9Mtr. Shoulder Builder Equipment made from “C” Class G.I. pipe of different Nb. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimetres. The Centre Pipe is of 100mm NB made from “C” Class G.I. pipe, and the bottom support of M.S. Round plate of 250mm diameter & 10mm thickness. Sleeve provided of M.S. seamless pipe of Outer diameter 125mm with thickness 5mm provided. The handle movement frame is of 25mm NB made from “C” Class G.I. pipe. The foundation used for fixing is a structure and made from centre pipe of G.I. of 80mm NB “C” or “c” class welded with M.S. round plate of Ø250mm & 10mm thick. Main pipe supported with 25mm X 25mm M.S. angle of 3mm thickness and 20mm x 40mm CRC square pipe of 3mm thickness. Closing Caps are made up of high quality Fiber reinforced Plastic material. The pins used are made up of Ø25mm of SAE8620 bright material. The bearing used is “6201zz” & “6205zz” permanent lubricated sealed bearing of reputed brand. High tensile steel with galvanized nut bolts are used for assembly. The circlips used for assembly is of A 24. The nylon bush is used for handle knob. The powder coating done with Pure Polyester powder of Ackzonoble or Berger Paints with 60 to 70 micron thick.

THI – CHI SPINNER (4 WHEEL) Thi – Chi spinner Equipment made from “C” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimetres. The centre pipe is of 100NB made up of “C” Class G.I. pipe. The bottom welded with support of M.S. round plate of Ø250 mm & 10mm thickness. The handle movement frame is of 25mm NB made from “C” Class G.I. pipe. The foundation used for fixing is a structure and made from centre pipe of G.I. of 80 NB “C” class Welded with M.S. round plate of Ø250mm & 10mm thick. Main pipe supported with 25mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Foundation cover Closing Cap is made from FRP Material with 0.7 mm Thickness. Closing Caps are made up of high quality Fiber reinforced Plastic material. The pins used are made up of Ø 25mm of SAE 8620 bright material. The bearing used is “6201zz” & “6205zz” permanent lubricated sealed bearing of reputed brand. High tensile steel with galvanized nut bolts are used for assembly. The powder coating done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70micron thickness.

THI – CHI SPINNER (2 WHEEL) Thi – Chi spinner Equipment made from “C” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimetres. The centre pipe is of 100NB made up of “C” Class G.I. pipe. The bottom welded with support of M.S. round plate of Ø250 mm & 10mm thickness. The handle movement frame is of 25mm NB made from “C” Class G.I. pipe. The foundation used for fixing is a structure and made from centre pipe of G.I. of 80 NB “C” class Welded with M.S. round plate of Ø250mm & 10mm thick. Main pipe supported with 25mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Foundation cover Closing Cap is made from FRP Material with 0.7 mm Thickness. Closing Caps are made up of high quality Fiber reinforced Plastic material. The pins used are made up of Ø 25mm of SAE 8620 bright material. The bearing used is “6201zz” & “6205zz” permanent lubricated sealed bearing of reputed brand. High tensile steel with galvanized nut bolts are used for assembly. The powder coating done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70micron thickness

OG-HIP TWISTER Twister made from “C” Class Galvanized Iron (G.I.) Pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. The center Pipe is of 100NB made from “C” Class G.I. Round Pipe. The bottom support welded is of M.S. round plate of Ø250mm & 10mm thick. The standing frame is of 32NB made from “C” class G.I. pipe. The handle frame of triple twister is of 25mm NB made from “C” class G.I. pipe. The foundation used for fixing is a structure and made from center pipe of G.I. of 80mm NB “C” class welded with M.S round plate of Ø250mm & 10mm thick. Main pipe supported with 25mm X 25mm M.S. angle of 3mm thickness and 20mm x 40mm CRC square pipe of 3mm thickness. The standing plate is fitted on the frame made up of Ø80 NB GI. Pipe. M.S Round Plate of size Ø300mm x 10mm thickness. Closing Caps are made up of high quality Fiber reinforced Plastic material. The Pins used are made up of Ø35mm SAE 8620 bright material. The bearings used are of “6205zz” permanent lubricated sealed bearing of reputed brand. High tensile steel with galvanized nuts & bolts are used for assembly. The powder coating is done with Pure Polyester powders of Ackzonoble or Berger Paints with 60 to 70 micron thickness.

SIT BOARD DOUBLE • PRODUCT DIMENSIONS:- 1760mm (Length) X 1140mm (Width) X 660mm (Height). • SAFE WORKOUT AREA:- 2500mm (Length) X 1600mm (Width). The Sit Up Board double made from “C” Class GI pipe. Centre column made from 100mm NB “C” class G.I. Pipe. The main frame is of 25mm NB made from “C” Class GI pipe. FRP sheet of 3mm thickness is moulded on main frame. The remaining frame of the sit up board is of 32mm NB made from “C” class GI pipe. The powder coating is done with Pure Polyester powder Ackzonoble or Berger Paints with 60 to 70 micron thickness. The foundation used for fixing is a structure and made from centre pipe of G.I. of 80 NB “C” class Welded with M.S. round plate of Ø250mm & 10mm thick. Main pipe supported with 25mm X 25mm M.S. angles of 3mm thickness and 20mm X 40mm CRC square pipes of 3mm thickness.

CHEST PRESS DOUBLE • DIMENSIONS:- 2000mm (Length ) x 710mm (Width) x 2200mm. (Height). • SAFE AREA:- 3.0Mtr x 1.7Mtr. Chest press equipment made up of “C” Class G.I. pipe of different NB. NB stands for Nominal Bore sizes i.e. Internal Diameter of pipe in millimetres. The centre pipe is of 100NB made up of “C” Class G.I. pipe. The bottom welded with support of M.S. round plate of Ø250mm & 10mm thickness. The connecting pipes are made up from 25NB “C” class G.I. pipe. The handle frame is made up from 32NB “C” class G.I. pipe. To build structure bushes are used which are made from M.S seamless pipe of 60mm O.D. and 5mm thickness as well as 60mm diameter solid bar bush is used. The foundation used for fixing is a structure and made from centre pipe of G.I. of 80 NB “C” class. Welded with M.S. round plate of Ø250mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330mm X 300mm X 2mm thickness and deep drawn and pressed in tools and dies ton have uniform radius of 20 mm with no sharp edges. Closing Caps are made up of high quality Fiber reinforced Plastic material. Foundation cover Closing Cap is made from FRP Material with 0.7 thickness. Pins used of Diameter 25mm and 17mm are made up from SAE 8620 bright material. Bolt M8X16mm and Nylock nut of M8 made of SS 304 used on nylon cap mounted on pins to project bearing and pins from rain and dust. The bearings used are of “6205zz” & “6203zz” permanent lubricated sealed bearing of reputed brand. High tensile steel with galvanized nuts & bolts are used for assembly. The circlips used for locking is made up of A24 mm & A16mm. The powder coating done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness.

SURF BOARD / SURFING BOARD • DIMENSIONS:- 910mm (Length) x 860mm (Width) x 1400mm.(Height). • SAFE AREA:- 1.39 x 1.27Mtr. Surf Board Equipment made from “C” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimetres. The centre pipe is of 100mm NB made from “C” class G.I. pipe. The sleeve pipe is of 125mm OD seamless pipe with thickness of 5mm and bolted to main frame with M10 SS bolts. The bottom support welded of M.S. plate of Ø250mm & 10mm thickness. The handle frame is of 25NB made from “C” class G.I. Pipe. The paddle frame is of 50NB made from “C” class G.I. pipe is supported with 70X8mm bend M.S. flat and can be replaceable. The foundation used for fixing is a structure and made from centre pipe of G.I. of 80NB “C” class welded with M.S. round plate of Ø250mm & 10mm thick. Main pipe supported with 25mm X 25mm M.S. angles of 3mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Bushes are used 70mm Outer Diameter with 5mm thickness is used. The footrests made from Aluminum casting material of size 320mmX270mmX5mm. For support to footrest 200mmX250mm with 3mm thickness M.S. plate used. Closing Caps are made up of high quality Fiber reinforced Plastic material. The pins used are made up of Ø35mm SAE 8620 bright material. The bearing used are of “6007zz” permanent lubricated sealed bearing of reputed brand. High tensile steel with galvanized nut bolts are used for assembly. The circlips used for assembly is of A34. The powder coating done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness.

BACK EXTENSION • DIMENSIONS:- 1400mm (Length) x 700mm (Width) x 820mm (Height). • SAFE AREA:- 2.4Mtr x 1.7Mtr. Back Extension Equipment made from “C” G.I. Pipe of different NB pipe. (NB stands for Nominal Bore i.e. Internal Diameter of pipe in mm). The main frame is pf 50mm NB made from “C” Class G.I pipe. The Foot resting frame of 32mm NB made from “C” Class G.I. pipe. The handle frame is of 25NB made from “C” Class G.I. pipe. The seat fitted on the outer frames is made up of M.S. Sheet of size 330mm X 300mm X 2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20mm with no sharp edges. The foundation used for fixing is consists of 50mm NB made from “C” Class G.I. pipe. The footrests are made from casted Aluminium material, having sizes 130 x 310 x 5mm thick. With the support of 250mm X 115mm X 3mm thick MS plate. The powder coating done with Pure Polyester powder of Ackzonoble or Berger with 60 to 70 micron thickness.

ROWER / ROWING MACHINE • DIMENSIONS:- 1200mm (Length) x 1000mm (Width) x 920mm. (Height). • SAFE AREA:- 1.5Mtr x 1.5Mtr. Rower Equipment made from “C” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimetres. The Main frame is of 80NB “C” class G.I. Pipe welded with M.S. round plate of 250mm X 10mm. The handle frame 25NB is made from “C” class G.I. pipe. The foundation used for fixing is a structure and made from centre pipe of G.I. of 80NB “C” class Welded with M.S. round plate of Ø250mm & 10mm thick. Main pipe supported with 25mm X 25mm M.S. angles of 3mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. To join the movement frame to main frame connecting links made up from 32NB G.I.”C” class pipe. The seat fitted on the outer frames are made up of M.S. Sheet of size 330mm X 300mm X 2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20mm with no sharp edges. Pins used of Diameter 17mm are made up from SAE 8620 bright material. The bearings used are of “6203zz” permanent lubricated sealed bearing of reputed brand. High tensile steel with galvanized nuts and bolts are used for assembly. The P.U. bushes (Stopper) used to avoid the collision. The circlips used for assembly is of A 16. The powder coating done with Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness.

AIR WALKER CUM LEG PRESS CUM SHOULDER BUILDER • DIMENSIONS:- 2250mm (Length) X 860mm (Width) X 1600mm (height) • Safe area :- 3.0 Mtr X 1.8 Mtr Air walker cum leg press cum Shoulder Builder Equipment made from “C” class G.I. Pipe of different N.B. NB stands for Nominal Bore Sizes i.e Internal diameter of pipe in millimetres. The main frame of 100NB made from “c” Class G.I. Pipe. The sleeve frame is of 100 OD and M.S. seamless pipe with thickness 5 mm. This sleeve can be disassembled from main frame. The bottom support frame of M.S. 40 mm X 75 mm X 3 mm thick C Channel. The Leg movement frame is of 32 NB made from “C” Class G.I. Pipe. Closing caps are made up of High quality Fibre reinforced Plastic material. Pins used of Diameter 25 mm are made up from SAE 8620 bright material. Bolt M8X16 mm and nylock nut of M8 made of SS 304 used on nylon cap mounted on pins to protect bearing and pins from rain and dust. The bearings used are “6001zz” & “6205zz” & “6007zz” permanent lubricated sealed bearing of reputed brand. High Tensile steel galvanized nuts & bolts are used for assembly. A24 circlips are used for assembly. 300mm diameter X 10 mm thick plate used for rotating seat of seating twister with 50 NB “C” Class G.I. pipe The Footrests are made from casted Aluminium material, having sizes 130 mm x 310 mm x 5mm thick with the support of 250 mm X 115mm X 3 mm thick MS Plate. It has bolting provision for mounting on concrete slab. The powder coating done with pure polyester powders from Ackzonoble or Berger Paints with minimum 60 to 70 micron thickness. Bolt M8X16 mm and Nylock nut of M8 made of SS 304 used on nylon cap mounted on pins to protect bearings and pins from rain and dust.

AIR WALKER CUM LEG PRESS CUM SEATING TWISTER DIMENSION:- 2300mm (Length) x 860mm (Width) x 1600mm(Height). SAFE AREA:- 1.39 x 1.27 mtr Air Walker cum leg press cum seating twister Equipment made from “C” class G.I.Pipe of different NB.NB Stands for Nominal Bore Sizes i.e Internal Diameter of pipe in millimetres.The main frame of 100NB made from “C”class G.I. pipe. The Sleeve frame is of 100 OD and of M.S.Seamless Pipe with thicknes 5mm. This sleeve can be disassembled from main frame.The bottom support frame of M.S. 40mm x 75 mm x 3 mm thick C -channel.The Seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330 mm x 300 mm x 2 mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges.The leg movement frame is of 32NB made from “C” class G.I. Pipe.The handle frame is of 25 NB made from “C” class G.I Pipe.Closing caps are made up of high quality Fiber reinforced plastic material. Pins used of Diameter 25mm are made up from SAE 8620 bright material. Bolt M8 x 16mm and Nylock nut of M8 made of SS 304 used on nylon cap mounted on pins to protect bearings and pins from rain and dust.The bearing used are “6205zz” permanent lubricated sealed bearing of reputed brand. High tensile steel galvanized nuts & bolts are used for assembly. A24mm cerclips are used for assembly. 300 mm diameter x 10 mm thick plate used for rotating seat of seating twister with 50NB “C” class G.I. Pipe. The footrests are made from casted Aluminium material,having sizes 130mm x 310 mm x 5mm thick. With the support of 250mm x 115mm x 3mm thick MS plate.It has Bolting provision for mounting on concrete slab. The powder coating done with Pure Polyester powders from Ackzonoble or Berger Paints with minimum 60 to 70 micron thickness. Bolt M8 x 16 mm and Nylock nut of M8 made of SS 304 used on nylon cap mounted on pins to protect bearing and pins from rain and dust.

AIR WALKER CUM LEG PRESS CUM STANDING TWISTER • DIMENSIONS:- 2250mm (Length) X 860mm (Width) X 1600mm (height) • Safe area :- 3.0 Mtr X 1.8 Mtr Air walker cum leg press cum standing twister Equipment made from “C” class G.I. Pipe of different N.B. NB stands for Nominal Bore Sizes i.e Internal diameter of pipe in millimetres. The main frame of 100NB made from “c” Class G.I. Pipe The bottom support frame of M.S. 40 mm X 75 mm X 3 mm C Channel. The Leg movement frame is of 32 NB made form “C” Class G.I. Pipe. The Handle Frame is of 25 NB made from “C” Class G.I. Pipe. Closing caps are made up of High quality Fibre reinforced Plastic material. Pins used of Diameter 25 mm are made up from SAE 8620 bright material. The bearings used are “6205zz” permanent lubricated swaled bearing of reputed brand. High Tensile steel galvanized nuts & bolts are used for assembly. A24 cerclips are used for assembly. 300mm diameter X 10 mm thick plate can be used for rotating seat of seating twister with 50 NB “C” Class G.I. pipe The Footrests are made from casted Aluminium material, having sizes 130 mm x 310 mm x 5mm thick with the support of 310 mm X 130mm X 3 mm thick MS Plate. The Equipment has bolting provision for mounting on concrete slab. The powder coating done with pure polyester powders from Ackzonoble or Berger Paints with minimum 60 to 70 micron thickness. To Build structure bushes are used which are made from seamless pipe of 50 mm O.D. and 5 mm thickness as well as 50 mm diameter solid bar is used. Bolt M8X16 mm and Nylock nut of M8 made of SS 304 used on nylon cap mounted on pins to protect bearings and pins from rain and dust.

AIR WALKER CUM LEG PRESS CUM SURF BOARD • DIMENSIONS:- 2300mm ( Length) x 860mm (Width) x 1600mm. (Height). • Safe Area:- 1.39 x 1.27Mtr. Air walker cum leg press cum surfboard Equipment made from “c” class G.I. Pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimetres. The main frame of 100NB made from “c” Class G.I. pipe. The Sleeve frame is of 100 OD and of M.S. Seamless Pipe with thickness 5mm. This sleeve can be disassembled from main frame. The bottom support frame of M.S. 40mm x 80mm x 3mm thick C Channel. The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330mm X 300mm X 2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20mm with no sharp edges. The leg movement frame is of 32NB made from “c” Class G.I. pipe. The handle frame is of 25NB made from “c” Class G.I. pipe. Closing caps are made up of high quality Fiber reinforced Plastic material. Pins used of Diameter 25mm are made up from SAE 8620 bright material. Bolt M8X16mm and Nylock nut of M8 made of SS 304 used on nylon cap mounted on pins to protect bearings and pins from rain and dust. The bearings used are “6205zz” permanent lubricated sealed bearing of reputed brand. High tensile steel galvanized nuts & bolts are used for assembly. A24mm cerclpis are used for assembly. 300mm diameter x 10mm thick plate used for rotating seat of seating twister with 50NB “c” class G.I. pipe. The footrests are made from casted Aluminium material, having sizes 130mm X 310mm X 5mm thick. With the support of 250mm X 115mm X 3mm thick MS plate. It has Bolting provision for mounting on concrete slab. The powder coating done with Pure Polyster powders from Ackzonoble or Berger Paints with minimum 60 to 70 microns thickness. Bolt M8X16mm and Nylock nut M8 made of SS 304 used on Nylon cap mounted on pins to protect bearings and pins from rain and dust.

AIR WALKER CUM SURF BOARD CUM SHOULDER BUILDER • DIMENSIONS:- 2300mm (Length) X 860mm (Width) X 1600mm. (Height). • Safe Area:- 1.39 X 1.27Mtr. Air Walker cum leg press cum shoulder builder Equipment made from “C” class G.I. Pipe of different N.B. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimetres. The main frame of 100NB made from “C” Class G.I. Pipe The Sleeve frame is of 100 OD and of M.S. Seamless Pipe with thickness 5mm. This Sleeve can be disassembled from main frame. The bottom support frame of M.S. 40mm X 75mm X 3mm thick C Channel. The leg movement frame is of 32NB made from “C” Class G.I. pipe. The handle frame is of 25NB made from “C” Class G.I. pipe. The handle frame is of 25NB made from “C” Class G.I. pipe. Closing Caps are made up of high quality Fiber reinforced Plastic material. Pins used of Diameter 25mm are made up from SAE 8620 bright material. Bolt M8X16mm and Nylock nut of M8 made of SS 304 used on nylon cap mounted on pins to protect bearings and pins from rain and dust. The bearings used are “6001xx” & “6205zz” & “6007zz” permanent lubricated sealed bearing of reputed brand. High tensile steel galvanized nuts & bolts are used for assembly. A24 circlips are used for assembly. 300mm diameter X 10mm thick plate used for rotating seat of seating twister with 50NB “C” Class G.I. pipe. The footrests are made from casted Aluminium material, having sizes 130mm X 310mm X 5mm thick. With the support of 250mm X 115mm X 3mm thick MS plate. It has Bolting provision for mounting on concrete slab. The powder coating done with Pure Polyester from Ackzonoble or Berger Paints with minimum 60 to 70 micron thickness. Bolt M8X16mm and Nylock nut of M8 made of SS 304 used on nylon on nylon cap mounted on pins to protect bearings and pins from rain and dust.

SEATING & STANDING TWISTER • DIMENSIONS:- 1700mm (Length) x 540mm (Width) x 1250mm.(Height). • SAFE AREA:- 3Mtr x 1Mtr. Seating & Standing Twister equipment made from “C” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. The Center Pipe is of 100mm NB made from “C” Class G.I. Round plate of Ø250mm & 10mm thickness is welded bottom. Handle and Bottom sleeve pipe of 125mm OD with thickness 5mm provided for easy assembly, replacement and maintenance. The bottom frame of the Seating & Standing twister is of 32NB , 50NB, and 25NB made from “C” class G.I. Pipe. The handle frame of Seating & Standing twister is 25 NB & Foot resting frame of seating side is made from “C” class G.I. pipe of 25mm NB. The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “C” class, Welded with M.S. round plate of Ø250mm & 10mm thick. Main pipe supported with 25mm X 25mm M.S. angles of 3mm thickness and 20mm x 40mm CRCA square pipes of 3mm thickness. The Twister plate fitted on the bottom frame is made up of M.S. Round Plate of size 300mm diameter and 10mm thickness. Closing Caps are made up of high quality Fiber reinforced Plastic material. The Pins used are made up of Ø35mm SAE 8620 bright material. The bearings used are of “6205zz” permanent lubricated sealed bearing of reputed brand. High tensile steel with galvanized nuts & bolts are used for assembly. The powder coating is done by Pure Polyester powder of Berger Paint with 60 to 70 micron thickness.

Triple Seating Twister • DIMENSIONS:- 1150mm (Length) X 1150mm (Width) X 1300mm (Height). • SAFE AREA:- 2Mtr X 2Mtr. Seated Twister Equipment made from “C” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. The Center Pipe is of 80 NB made from “C” Class G.I. Pipe. The chair Pipe is of 50 NB made from “C” Class G.I. Pipe. The M.S. round plate of Ø250mm & 10mm thickness is welded at bottom. The Sleeve frame for handle and bottom is of 125 OD and M.S. Seamless Pipe with thickness 5mm. This sleeve can be disassembled from main frame. The supporting frame of the seated twister is of 32 NB made from “C” class G.I. pipe. The handle framer of seated twister is of 25mm NB made from “C” class G.I. Pipe. The foundation used for fixing is structure and made from center pipe of G.I. of 80 NB “C” class, Welded with M.S. round plate of Ø250mm & 10mm thick. Main pipe supported with 25mm X 25mm M.S. angles of 3mm thickness and 20mm X 40mm CRC square pipes of 3mm thickness. The twister plate is fitted on the supporting frame is made up of 60 NB seamless pipe. Ø300mm X 10mm thickness M.S. Round Plate. Closing Caps are made up of high quality Fiber reinforced Plastic material. The Pins used are made up of Ø35 mm SAE 8620 bright material. The bearings used are of “6205zz” permanent lubricated sealed bearing of reputed brand. High tensile steel with galvanized nuts and bolts are used for assembly. The powder coating done with Pure Polyster powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness.

DOUBLE STANDING TWISTER • DIMENSIONS:- 1500mm (Length) x 600mm (Width) x 1300mm. (Height). • SAFE AREA:- 2.5Mtr X 1.5Mtr. Double Twister equipment made from “C” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. The Center Pipe is of 100 NB made from “C” Class G.I. material. The bottom welded with support of M.S. round plate of Ø250mm & 10mm thickness. The bottom frame is of 32NB made from “C” class G.I. pipe. The handle frame is of 25BN made from “C” class G.I. pipe. The foundation used for fixing is a structure and made from center pipe of G.I. of 80NB “C” class welded with M.S. round plate of Ø250mm & 10mm thick. Main pipe supported with 25mm X 25mm M.S. angles of 3mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. The twister plate fitted on the bottom frame is made up of M.S. Round Plate of size Ø300mm and 10mm thick. Closing Caps are made up of high quality Fiber reinforced Plastic material. Pins used of Diameter 35mm are made up from SAE 8620 bright material. The bearings used are of “6205zz” permanent lubricated sealed bearing of reputed Brand. High tensile steel with galvanized nuts and bolots are used for assembly. The powder coating done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness.

LEG PRESS DOUBLE • DIMENSIONS: - 1840mm (Length) X 360mm (Width) X 1560mm(Height). • SAFE AREA: - 2.8 x 1.4 Mtr Leg Press equipments made from “C” Class G.I pipe of different N.B. NB stands for Nominal Bore Sizes I.e Internal Diameter of pipe in millimeters.The Center pipe is of 100mm NB made from “C” Class G.I.Pipe.The Sleeve frame is of 100 OD and of M.S. Seamless pipe with thickness 5mm.This Sleeve can be disassembled from main frame.The bottom support of M.S. round plate of ᴓ250mm & 10 mm thick.The remaining outer frame is of 32NB made from “C” class G.I.pipe The Foundation used for fixing is structure and made from center pipe of G.I. of 80mm. NB “C” Class welded with M.S. round plate of ᴓ250mm & 10mm thick.Main pipe supported with 25mm X 25mm M.S. angle of 3mm thickness and 20mm X 40mm CRC square pipe of 3mm thickness.Seat & Back rest provided are made up of MS deep draw quantity of 2mm thickness with no joint with uniform outer edge radius 20 mm.The footrest are made from casted Aluminium material,having sizes 130mm X 310mm X 5mm thick. With the support of 310mm X 130mm X 3mm thick MS plate.The frame of footrest made up of 25 NB ”C” class G.I.pipe.Closing caps are made up of high quality fiber reinforced Plastic material.To build structure bushes are used which are made from M.S. seamless pipe of 50mm O.D and 5mm thickness.The pins used are made up of ᴓ25mm SAE 8620 bright material.The bearing used are of “6205zz” permanent lubricated sealed bearing of reputed Brand. High tensile steel with galvanized nut bolts are used for assembly.The cerclips used for assembly are of A24 mm.The powder coating done with Pure Polyester powder of Ackzonable or Berger with 60 to 70 micron thickness.

4 IN 1 COMBINATION (SEATED PULLER + LEG PRESS + SURF BOARD+ SEATING TWISTER) • PRODUCT DIMENSIONS: - 2410mm(Length) x 1720mm (Width) x 2350mm(Height). • SAFE WORKOUT AREA: - 4500mm (Length) x 4500mm (Width). Combination made from “C” Class G.I. pipe.The center MS pipe is of 100mmx100mm size.Round plate of 250mm diameter & 100mm thickness is welded at bottom.The links are made up of 25mm NB “C” class G.I. pipe.The handle and seat frame of seated puller is made from 32mm NB “C” class G.I. pipe. For the assembly different bushes are used which is made from seamless pipe of 50mm OD and 5mm thickness & 50mm solid bar is used.Leg press center frame is of 32mm NB made from “C” class GI pipe. The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330mm x 300mm x 2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. The leg press footrest consists of 25 NB made from “C” class GI pipe. The pins used in are made up of 25mm diameter hardened low carbon steel material.The Nut Bolts used for assembly are made from S.S.material.The bushes(stopper)Used to avoid the collusion made from poly Urethane Plastic material of 50 mm diameter.Surfing frame is of 32NB made from “C” Class G.I.Pipe.Surf board handle frame is of 25NB made from “C” class G.I.pipe.300mm diameter x 10mm thick plate can be used for rotating seat of seating twister with 50NB vertical G.I pipe.Closing caps made from high quality FRP material which is of 2mm thickness.The pins used are made up of 17mm diameter solid bar.The bearing used are of “6203,6205” permanent lubricated sealed bearing of reputed make.The nut bolts used for assembly are made from M.S pre-galvanized material.A17,A24,A34 circlips are used for assembly.The footrests are made from casted Aluminium material,having sizes 130mm x310mm x 5mm thick.With the support of 310mm x 130mm x 3mm thick MS plate. It has Bolting provision for mounting on concreate slab. Polycarbonate Sheet is used for roof with supporting frame which made from 25x25mm,40x20mm MS pipe and 25mm NB “C” class G.I.pipe.MS 8mm thick round plate can be used for splitting roof structure from main frame.The powder coating done with pure Polyester powders from Ackzonoble or Berger paints with minimum 60 to 70 micron thickness.

8 IN 1 COMBINATION (SEATED PULLER +STANDING TWISTER +SURF BOARD + HORSE RIDER + LEG PRESS + CROSS TRAINER + PUSH UP BARS + AIR WALKER) • PRODUCT DIMENSIONS: - 4000 mm • SAFE WORKOUT AREA:- 5000mm Combination made from “C” Class G.I. pipe. The octagonal structure is made up of 100mm NB “C” class GI pipe. Round plate of 250mm diameter & 10mm thickness is welded at bottom of octagonal structure. The links are made up of 25mm NB “C” class G.I. pipe. The handle and seat frame of seated puller is made from 32mm NB “C” class G.I. pipe. For the assembly different bushes are used which is made from seamless pipe of 50mm OD and 5mm thickness & 50mm solid bar is used. The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330mm X 300mm X2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20mm with no sharp edges. Leg press center frame is of 32mm NB made from “C” class GI pipe. The leg press footrest consists of 25 NB made from “C” class GI pipe. The pins used in are made up of 25mm diameter hardened low carbon steel material. The Nut Bolts used for assembly are made from S.S. material. The bushes (stopper) used to avoid the collusion made from Poly Urethin Plastic material of 50mm diameter. Surfing frame is of 32NB made from “C” class G.I. pipe. Surf board handle frame is of 25NB made from “C” Class G.I. pipe. 300mm diameter x 10mm thick plate can be used for roating seat of seating twister with 50NB vertical G.I. pipe. Closing caps made from high quality FRP material which is of 2mm thickness. The pins used are made up of 17mm diameter solid bar. The bearing used are of “6203,6205” permanent lubricated sealed bearing of reputed make. The nut bolts used for assembly are made from M.S. pre-galvanized material. A17, A24, A34 circlips are used for assembly. The footrest are made from casted Aluminium material, having sizes 130mm X 310mm X 5mm thick. With the support of 310mm X 130mm X3mm thick MS plate. It has Bolting provision for mounting on concrete slab. Polycarbonate sheet is used for roof with supporting frame which made from 25x25mm, 40x20mm MS pipes and 25mm NB “C” class G.I. pipe. MS 8mm thick round plate can be used for splitting roof structure from main frame. The power coating done with Pure Polyester powders from Ackzonoble or Berger Paints with minimum 60 to 70 micron thickness.

Rubber flooring - Proving and fixing rubber flooring : 36 mm consist of rubber crump : 30 mm granules (epdm ) 6mm epdm rubber flooring epdm rubber (ethylene propylene diene monomer (m class rubber )having following characteristic mooney viscosity , ml 1+ 4 @ 125° c 5 200+ ethylene content, wt. % 45 to 80 wt % diene content , wt % 0 to 15 % wt. % specific gravity , gm /ml 0.855- 0.88 ( depending on polymer composition ) Ground surface required under rubber flooring 1. Excavation for foundation in earth, soil of all types, sand, gravel and soft murum up to 1.50 meter depth including removing the excavated material , stacking and spreading as directed including dewatering (unless provided elsewhere,)preparing the bed for the foundation and necessary backfilling, ramming, watering complete excluding shoring and strutting . 2. Providing dry trap/ rubber stone soling 15 cm to 20 cm thick including hand packing and compacting etc. Complete. 3. Proving and laying in situ plain cement concrete 1:1 1/2: 3 (m- 20) of trap metal for foundation and bedding including bailing out water manually, form work , compacting and curing. 4.proving second class burnt brick masonry with conventional / i.s. Type brick in cement mortar 1: 6 in foundation and plinth of inner walls/ in plinth of external walls including bailing out water manually , striking joints on unexposed faces racking out joints on exposed faces and watering completing. 5.proving external cement plaster 20mm thick in one coat in cement mortar 1: 4 to concrete or brick surface or stone surface in all positions and curing complete.

SWINGS - 2" G I CLAMP

SWINGS - S HOOK

SWINGS - CHAIN ASSEMBLY 1 NO

SWINGS - BEARING CASTIN WITH M/S

SWINGS - SWING CLAMP ASSEMBLY (NYLON)

SWINGS - RUBBER BELTWITH HOOK ONLY

SWINGS - BELT ASSEMBLY

SWINGS - ROTO BUCKET ASSEMBLY

SWINGS - RUBBER BUCKETWITH HOOK (TODDLER )

SWINGS - TODDLER CHAIN WITH HOOK SET

SWINGS - JOKER FACE ( TODDLER )

SWINGS - TOP PIPE

SWINGS - LEG PIPE 1 NOS

SWINGS - NUT BOWLD PACK

SWINGS - JUNCTION BOX

SWINGS - WELDING

DELUXE SWING - ROOF FRAME WITHOUT SHEET

DELUXE SWING - SEAT FRAME WITHOUT STRIP &CHAIN

DELUXE SWING - SEAT STRIP

DELUXE SWING - SEAT ASSLY. WITH CHAIN & BEARING

DELUXE SWING - FRP BACKREST

DELUXE SWING - FRP SEATING ARRANGEMENT

DELUXE SWING - PVC SHEET

CIRCULAR SWING - FRP SEAT

CIRCULAR SWING - TOP PIPE

CIRCULAR SWING - BEARING ASSEMLYBLY

CIRCULAR SWING - SEAT FRAME

CIRCULAR SWING - "T" JOINTS 1/2 '' X 1/2'' SET

CIRCULAR SWING - "T" JOINTS 1/2 '' X 1'' SET

CIRCULAR SWING - GI PLATFORM

CIRCULAR SWING - CIRCULAR SWING FRAME

CIRCULAR SWING - SPACER PIPE

STD, SEE SAW - SEESAW LEVER WITHOUT SEAT.

STD, SEE SAW - T PIPE

STD, SEE SAW - FOUNDATION STAND

STD, SEE SAW - SEE SAW T HANDLE

STD, SEE SAW - BUSH BEARING

STD, SEE SAW - WELDING WORK

STD, SEE SAW - CHARACTER

STD, SEE SAW - HANDLE SS

STD, SEE SAW - ROTO SEAT

MULTY SEATER SEE – SAW - SEESAW LEVER WITHOUT SEAT.

MULTY SEATER SEE – SAW - T PIPE

MULTY SEATER SEE – SAW - FOUNDATION STAND

MULTY SEATER SEE – SAW - ROTO ECONOMY SEAT

MULTY SEATER SEE – SAW - SPRING ( 1 NO )

MULTY SEATER SEE – SAW - CHAIR SEAT

MULTY SEATER SEE – SAW - STAND

MULTY SEATER SEE – SAW - WELDING

ROADRASH - STEERING WHEEL

ROADRASH - T-JOINT 1/2 X 1 "

ROADRASH - SIDE WHEEL

ROADRASH - SIDE RAILING

ROADRASH - ROTO SEAT

ROADRASH - CONECTING FLANGE

ROADRASH - NUT BOWLD PACK

ROCK N ROLL - T' CLAMP 1/2 X 1"

ROCK N ROLL - CONNECTING PIPE

ROCK N ROLL - WELDING

ROCK N ROLL - FRP WHEEL GARD

ROCK N ROLL - SIDE FRAME

ROCK N ROLL - NUT BOWLD PACK

MERRY GO ROUND - BEARING SHAFT

MERRY GO ROUND - FRP TOP

MERRY GO ROUND - CHAIR SEAT

MERRY GO ROUND - Sp M.S PLATE 200X 150 X 6 MM

MERRY GO ROUND - PEDDEL

MERRY GO ROUND - ROTO DUCK

MERRY GO ROUND - CONACTING PIPE 1 NO

MERRY GO ROUND - ARM FREAM

MERRY GO ROUND - SEAT FREAM

MERRY GO ROUND - FOUNDATION STAND

MERRY GO ROUND - MS PLATE

MERRY GO ROUND - WELDING

MERRY GO ROUND - NUT BOWLD PACK

CRYSTAL MAZE - CONNECTING PIPE

CRYSTAL MAZE - PLATES

CRYSTAL MAZE - SUPPORT PIPE

CRYSTAL MAZE - NUT BOWLED PACK

SATELLITE SCRAMBLER - CHAIN SET LADDER

SATELLITE SCRAMBLER - WELDING

SATELLITE SCRAMBLER - NUT BOWLD PACK

All Net Climber - STRAIGHT NET ASSEMBLY

All Net Climber - SPIDER WEB NET ASSEMBLY

All Net Climber - A TO B NET ASSEMBLY

All Net Climber - NET ROCKCLIBER ASSEMBLY

All Net Climber - CLAMP ASSEMBLLY

All Net Climber - FRP ROCK ( 1 PCS )

All Net Climber - NUT BOWLD PACK

All Net Climber - SPACER PIPE

ECONOMIC SLIDES - ECONOMY SLIDE CHUTE 7'

ECONOMIC SLIDES - ECONOMY SLIDE CHUTE 5'

ECONOMIC SLIDES - RAILING GI

ECONOMIC SLIDES - TRIANGLE STEPS

ECONOMIC SLIDES - LADDER FREAM

ECONOMIC SLIDES - PLATFORM ( GI )

ECONOMIC SLIDES - SMALL 'H'

ECONOMIC SLIDES - MIDDLE 'H'

ECONOMIC SLIDES - BIG "H"

ECONOMIC SLIDES - NUT BOWLD PACK

ECONOMIC SLIDES - CENTER SUPPORT PIPE

WAVE SLIDE - SLIDING CHUTE 5' HT

WAVE SLIDE - SLIDING CHUTE 7' HT

WAVE SLIDE - GEL COATING 5' HT

WAVE SLIDE - GEL COATING 7' HT

WAVE SLIDE - FRP LANDING MODULE

WAVE SLIDE - ROTO LANDING MODULE

WAVE SLIDE - LADDER ASSEMBLY

WAVE SLIDE - NUT BOWLD PACK

WAVE SLIDE - TRAINGLE STEP

WAVE SLIDE - LADDER FRAME

DELUXE SLIDE

DELUXE SLIDE - SLIDE CHUTE S.S. (5')

DELUXE SLIDE - SLIDE CHUTE S.S. (7')

FRP ROLLER SLIDE

FRP ROLLER SLIDE - ROLLER SLIDE – ROLLER

FRP ROLLER SLIDE - ROLLER SLIDE

FRP ROLLER SLIDE - " " " ROLLER PIPE & Pin

FRP ROLLER SLIDE - ROD

TUBE SLIDE

TUBE SLIDE - SLIDING MODULE

TUBE SLIDE - COVER

TUBE SLIDE - LANDING MODULE

TUBE SLIDE - T SUPPORT

TUBE SLIDE - CENTER SUPPORT PIPE

SPIRAL SLIDE - SLIDING MODULE 5' - 1 SET

SPIRAL SLIDE - SLIDING MODULE 7' - 1 SET

SPIRAL SLIDE - FRP PLATFORM FOR LADDER

SPIRAL SLIDE - LANDING MODULE / FRP / ROTO

SPIRAL SLIDE - GEL COATING

SPIRAL SLIDE - RAILLING

SPIRAL SLIDE - PLATFORM FRP

SPIRAL SLIDE - MODULE

MINI WAVE SLIDE - SLIDING MODULE / FRP / ROTO

MINI WAVE SLIDE - CENTER SUPPORT PIPE

MINI WAVE SLIDE - GI LADDER

ROTO WAVE SLIDE - SLIDE CHUTE (5')

ROTO WAVE SLIDE - SLIDE CHUTE (7')

ROTO SPIRAL SLIDE - SLIDE CHUTE (5')

ROTO SPIRAL SLIDE - SLIDE CHUTE (7')

ROTO SPIRAL SLIDE - ROTO SPIRAL SLIDE ENTRY

STD.BENCH - G I STRIP

STD.BENCH - STAND 1 NOS

STD.BENCH - WELDING

STD.BENCH - NUT BOWLD PACK

VIP/VICTORIA/REGAL/ROYAL - FRP STRIP

VIP/VICTORIA/REGAL/ROYAL - STABILITY STRIP

VIP/VICTORIA/REGAL/ROYAL - FRP SEATING ARRANGEMENT

VIP/VICTORIA/REGAL/ROYAL - NUT BOWLD PACK

PLANK / PODIUM BENCH - FRP PLANK

BALANCING BRIDGE - Multi Braided steel core nylon Rope

BALANCING BRIDGE - WIRE ROPE

BALANCING BRIDGE - FLOAT CLAMPS 1 SET (INSIDE-OUTSIDE)

BALANCING BRIDGE - ROTO FLOATS

BALANCING BRIDGE - D' SHACKLES 3/4"

BALANCING BRIDGE - NUT BOWLD PACK

BALANCING BRIDGE - WELDING

SWINGING BRIDGE - PLANK ROTO/WOODEN WITH CLIMP

SWINGING BRIDGE - CHAIN SEAT

SWINGING BRIDGE - D' SHACKLES 3/4"

SWINGING BRIDGE - NUT BOWLD PACK

GLIDER - PULLY BEARING ONLY

WALK. BARREL - ROTO DRUM

WALK. BARREL - BEARING ASSLY

WALK. BARREL - C HANDEL

WALK. BARREL - WELDING

WALK. BARREL - NUT BOWLD PACK

CROSS & ZERO

CROSS & ZERO - T JOINT

CROSS & ZERO - X' & 'O' BOX (1 BOX)

CROSS & ZERO - SPACER PIPE

COMBINATION SET - ROTO / FRP SLIDE

COMBINATION SET - BUCKET ASSEMBLY

COMBINATION SET - SEESAW LEVER

COMBINATION SET - SEE SAW ( BABY SEAT )

COMBINATION SET - SMALL 'H'

COMBINATION SET - STEP

COMBINATION SET - SWING TOP PIPE

COMBINATION SET - T JOINT 1"X 1/2"

SPRING RIDER - PAINTING

SPRING RIDER - DUCK

SPRING RIDER - WHALE

SPRING RIDER - PONY

SPRING RIDER - SPRING

SPRING RIDER - DOUBLE SPRING SET – OLD

SPRING RIDER - OCRA

SPRING RIDER - PEDDLE

SPRING RIDER - BIKE

SPRING RIDER - JUMBO

SPRING RIDER - BIRD

SPRING RIDER - DOLPHIN

SPRING RIDER - STAND

MULTI ACTIVITY PLAY SYSTEMS - ROTO RAILING BIG

MULTI ACTIVITY PLAY SYSTEMS - SQUARE PLAT FORM – FRP

MULTI ACTIVITY PLAY SYSTEMS - SQUARE CANOPY - 1 TRIANGULAR PART

MULTI ACTIVITY PLAY SYSTEMS - TILE CANOPY

MULTI ACTIVITY PLAY SYSTEMS - FLOWER LEAF

MULTI ACTIVITY PLAY SYSTEMS - SUNFLOWER FRP

MULTI ACTIVITY PLAY SYSTEMS - BUTERFLY ROTO

MULTI ACTIVITY PLAY SYSTEMS - FRP LADDER 5'

MULTI ACTIVITY PLAY SYSTEMS - GI LADDER ASSEMBLY

MULTI ACTIVITY PLAY SYSTEMS - RAINDEER

MULTI ACTIVITY PLAY SYSTEMS - VERTICAL NET ASSEMBLY

MULTI ACTIVITY PLAY SYSTEMS - TRAINGLE PLATFORM

MULTI ACTIVITY PLAY SYSTEMS - OCTAGANOL PLATFORM

MULTI ACTIVITY PLAY SYSTEMS - SPLIT LEVEL LADDER

MULTI ACTIVITY PLAY SYSTEMS - CURVE BRIDGE RAILLING

MULTI ACTIVITY PLAY SYSTEMS - SQUARE CANOPY FLAG

MULTI ACTIVITY PLAY SYSTEMS - WINDOW CANOPY FULL ROTO

MULTI ACTIVITY PLAY SYSTEMS - HEXAGONAL CANOPY 1- TRIANGULAR PART

MULTI ACTIVITY PLAY SYSTEMS - HEXAGONAL PLATFORM

MULTI ACTIVITY PLAY SYSTEMS - CONE CANOPY FRP / ROTO

MULTI ACTIVITY PLAY SYSTEMS - ARCH CANOPY FRP / ROTO

MULTI ACTIVITY PLAY SYSTEMS - DOME CANOPY FRP / ROTO

MULTI ACTIVITY PLAY SYSTEMS - FROG CANOPY FRP / ROTO

MULTI ACTIVITY PLAY SYSTEMS - CHARACTER RAILING

MULTI ACTIVITY PLAY SYSTEMS - SLIDE ENTRY

MULTI ACTIVITY PLAY SYSTEMS - PLAIN BRIDGE – FRP

MULTI ACTIVITY PLAY SYSTEMS - PLAIN BRIDGE RAILINNG 1 SIDE

MULTI ACTIVITY PLAY SYSTEMS - BALL RAILING

MULTI ACTIVITY PLAY SYSTEMS - BUBBLE PANEL DOME

MULTI ACTIVITY PLAY SYSTEMS - BUBBLE PANEL FRAEM

MULTI ACTIVITY PLAY SYSTEMS - C HANDEL

MULTI ACTIVITY PLAY SYSTEMS - HEXAGONAL PLATFORM

MULTI ACTIVITY PLAY SYSTEMS - SPIRAL SCRAMBLER 2.1

MULTI ACTIVITY PLAY SYSTEMS - ROTO RAILING SMALL

MULTI ACTIVITY PLAY SYSTEMS - 80 NYLON CLAMP

MULTI ACTIVITY PLAY SYSTEMS - 80 X 20 NYLON CLAMP

MULTI ACTIVITY PLAY SYSTEMS - NUT BOWLD PACK

MULTI ACTIVITY PLAY SYSTEMS - BOWL SLIDE

MULTI ACTIVITY PLAY SYSTEMS - MAPS PAINTING DECK 1 NOS

MULTI ACTIVITY PLAY SYSTEMS - MAPS REINSTALLATION DECK 1 NOS

MULTI ACTIVITY PLAY SYSTEMS - MAPS DISSMENTAL DECK 1 NOS

MULTI ACTIVITY PLAY SYSTEMS - ALUM CHERKED PLATE 72 INCH X 30 INCH

MULTI ACTIVITY PLAY SYSTEMS - ALUM CHERKED PLATE 30 INCH X 30 INCH

MULTI ACTIVITY PLAY SYSTEMS - ALL TYPE SWING PAINTING

MULTI ACTIVITY PLAY SYSTEMS - ALL TYPE SLIDE PAINTING

MULTI ACTIVITY PLAY SYSTEMS - ALL TYPE MERY GO ROUND PAINTING

MULTI ACTIVITY PLAY SYSTEMS - ALL TYPE SEE SAW PAINTING

MULTI ACTIVITY PLAY SYSTEMS - ALL TYPE SCRAMBLER PAINTING

MULTI ACTIVITY PLAY SYSTEMS - ALL TYPE SCRAMBLER REINSTALLATION

MULTI ACTIVITY PLAY SYSTEMS - ALL TYPE SWING REINSTALLATION

MULTI ACTIVITY PLAY SYSTEMS - ALL TYPE SLIDE REINSTALLATION

MULTI ACTIVITY PLAY SYSTEMS - ALL TYPE MERY GO ROUND REINSTALLATION

MULTI ACTIVITY PLAY SYSTEMS - ALL TYPE SEE SAW REINSTALLATION

MULTI ACTIVITY PLAY SYSTEMS - ALL TYPE SCRAMBLER REINSTALLATION

MULTI ACTIVITY PLAY SYSTEMS - ALL TYPE SWING DISSMENTAL

MULTI ACTIVITY PLAY SYSTEMS - ALL TYPE SLIDE DISSMENTAL

MULTI ACTIVITY PLAY SYSTEMS - ALL TYPE MERY GO ROUND DISSMENTAL

MULTI ACTIVITY PLAY SYSTEMS - ALL TYPE SEE SAW DISSMENTAL

MULTI ACTIVITY PLAY SYSTEMS - ALL TYPE SCRAMBLER DISSMENTAL

MULTI ACTIVITY PLAY SYSTEMS - ALL TYPE SWING WELDING WORK

MULTI ACTIVITY PLAY SYSTEMS - ALL TYPE SLIDE WELDING WORK

MULTI ACTIVITY PLAY SYSTEMS - ALL TYPE MERY GO ROUND WELDING WORK

MULTI ACTIVITY PLAY SYSTEMS - ALL TYPE SEE SAW WELDING WORK

MULTI ACTIVITY PLAY SYSTEMS - ALL TYPE SCRAMBLER WELDING WORK

MAGIC CARPET - PAINTING

MAGIC CARPET - REINSTALLATION

MAGIC CARPET - WELDING

MOON CLIMBER - PAINTING

MOON CLIMBER - REINSTALLATION

SQUARE JUNGLE GYM - PAINTING

SQUARE JUNGLE GYM - REINSTALLATION

SQUARE JUNGLE GYM - SUPPORT PIPE

FITNESS EQUIPMENT SPARE PARTS - BEARING

FITNESS EQUIPMENT SPARE PARTS - HANDLE

FITNESS EQUIPMENT SPARE PARTS - SURF BOARD BEARING

FITNESS EQUIPMENT SPARE PARTS - NOBE

FITNESS EQUIPMENT SPARE PARTS - ABS BOARD FRP SHEET

FITNESS EQUIPMENT SPARE PARTS - NUT BOULT PACK

FITNESS EQUIPMENT SPARE PARTS - LEG EXTENTION SEAT

FITNESS EQUIPMENT SPARE PARTS - RUBBER GRIP

FITNESS EQUIPMENT SPARE PARTS - PADDLE

FITNESS EQUIPMENT SPARE PARTS - LINKS

FITNESS EQUIPMENT SPARE PARTS - AERO RIDER SEAT

FITNESS EQUIPMENT SPARE PARTS - HIP TWISTER BEARING

FITNESS EQUIPMENT SPARE PARTS - BACK EXTENTION SEAT

FITNESS EQUIPMENT SPARE PARTS - SURF BOARD FOOT REST

FITNESS EQUIPMENT SPARE PARTS - WELDDING

FITNESS EQUIPMENT SPARE PARTS - HIP TWISTER PLATFORM PLATE

FITNESS EQUIPMENT SPARE PARTS - PAINTING

FITNESS EQUIPMENT SPARE PARTS - DISSMENTAL

FITNESS EQUIPMENT SPARE PARTS - REINSTALLATION

FITNESS EQUIPMENT SPARE PARTS - FOUNDATION STAND

FITNESS EQUIPMENT SPARE PARTS - AERIAL STROLLER ASSEMBLY

FITNESS EQUIPMENT SPARE PARTS - SEAT

FITNESS EQUIPMENT SPARE PARTS - HAND ROWER ASSEMBLY

FITNESS EQUIPMENT SPARE PARTS - CHEST PRESS ASSEMBLY

FITNESS EQUIPMENT SPARE PARTS - SURF BOARD ASSEMBLY

FITNESS EQUIPMENT SPARE PARTS - LEG PRESS ASSEMBLY

FITNESS EQUIPMENT SPARE PARTS - CROSS TRAINER ASSEMBLY

FITNESS EQUIPMENT SPARE PARTS - SURF BOARD SHEET

FITNESS EQUIPMENT SPARE PARTS - WHEEL ASSEMBLY

FITNESS EQUIPMENT SPARE PARTS - SKY WALKER ASSEMBLY

FITNESS EQUIPMENT SPARE PARTS - STANDING TWISTER ASSEMBLY

FITNESS EQUIPMENT SPARE PARTS - END CAP

BABA PLAY WORLD

HONEY FUN N THRILL CO