Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹2.8 L
Closing Date
11 Sept 2026, 12:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Deposit Work
4 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees. N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. Note: "The balance sheet and all other financial documents attested/certified by the Chartered Accountant (CA) to substantiate fulfillment of Financial Eligibility Criteria should be with UDIN, failing which the offer shall be considered as incomplete and will be summarily rejected without any further reference".
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Defination of Similar Work :- Any Civil Engineering Work involving Construction of Building/Quarters/Any other Work involving RCC Work.
36 conditions · 11 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderers shall submit a copy of certificate stating that all their statements/documents submitted alongwith bid are true and factual. Standard format of certificate to be submitted by the bidder is enclosed as Annexure-V. In addition to Annexure-V, in case of other than Company/Proprietary firm, enclosed as Annexure-V A shall also be submitted by the each member of a Partnership Firm/ Joint Venture (JV)/ Hindu Undivided Family (HUF)/ Limited Liability Partnership (LLP) etc. as the case may be. Non submission of above certificate(s) by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested/digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document. The format of Annexure V and Annexure VA are available at document section.
The tenderer whether sole proprietor / a company or a partnership firm / joint venture (JV) / registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shall be summarily rejected.
A separate power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, shall be submitted after award of work, specifically authorizing him/them to deal with all other contractual activities subsequent to signing of agreement, if required.
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. Following documents shall be submitted by the tenderer: -
Following documents shall be submitted by the tenderer in case of Sole Proprietorship Firm: All documents in terms of Para 10 of the Tender Form (Second Sheet).
Following documents shall be submitted by the tenderer in case of HUF: (i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) All other documents in terms of Para 10 of the Tender Form (Second Sheet).
Following documents shall be submitted by the tenderer in case of Company registered under Companies Act 2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms Para 10 of the Tender Form (Second Sheet).
Following documents shall be submitted by the tenderer in case of LLP (Limited Liability Partnership): (i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet).
Following documents shall be submitted by the tenderer in case of Partnership Firm: (i) A notarized copy of the Partnership Deed or a copy of the Partnership deed registered with the Registrar. (ii) A notarized or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm. (iii) An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP in which they were / are partners/members. Any Concealment / wrong information in regard to above shall make the bid ineligible or the contract shall be determined under Clause 62 of the Standard General Conditions of Contract. (iv) All other documents in terms of Para 10 of the Tender Form (Second Sheet).
Following documents shall be submitted by the tenderer in case of Registered Society & Registered Trust: (i) A copy of Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) A copy of Rules & Regulations of the Society (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet).
The Railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when so required by the Railway, make available all such information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification, by the Railway shall not relieve the bidder of its obligations or liabilities hereunder nor will it affect any rights of the Railway there under
In case of any information submitted by tenderer is found to be false, forged or incorrect at any time during process for evaluation of tenders, it shall lead to forfeiture of the tender Bid Security besides banning of business for a period of upto two years.
In case of any information submitted by tenderer is found to be false, forged or incorrect after the award of contract, the contract shall be terminated. Bid Security, Performance Guarantee and Security Deposit available with the railway shall be forfeited. In addition, other dues of the contractor, if any, under this contract shall be forfeited and agency shall be banned for doing business for a period of upto two years.
The following documents should be specified for submission along with tender:
A list of personnel / organization on hand and proposed to be engaged for the tendered work.
A list of Plant & Machinery available on hand and proposed to be inducted and hired for the tendered work
List of Works completed in the last three financial years giving description of work, organization for whom executed, approximate value of contract at the time of award, date of award and date of scheduled completion of work, Date of actual start, actual completion and final value of contract should also be given.
List of works on hand indicating description of work, contract value, and approximate value of balance work yet to be done and date of award.
Non-compliance with any of the conditions set forth therein above is liable to result in the tender being rejected.
Letter of credit as mode of payment in works tenders or service tenders is available. It is an option for the contractor to take payment from Railways through a letter of credit (LC) arrangement. The details letter of credit as Annexure B is available at document section
Please submit bank details of the firm individual JV/partnership etc. i.e. name of the bank along with bank branch code, account number, IFSC code, PAN number and other necessary & relevant documents.
All tenders for both supplies and works (including all service and maintenance contracts) having estimate value of Rs.10.00 Lakhs and above, an option for supplier/contractor to take payment from railway through a letter of credit (LC) arrangement. As per instruction of Railway Board's letter No.2018/CE-1/CT/9 dt. 04.06.2018 and FA & CAO/G/ECR's vide his letter No.ECR/Fin/Exp/LC dated 16.05.2018, a format (Annexure-B) is attached herewith for documents
The tenderers in their bids shall indicate the details of their Jurisdictional Assessing Officers (Designation, address & email Id). In case of a contract award, a copy of the LOA/Purchase Order shall be immediately forwarded by Purchaser to the Jurisdictional Assessing Officer mentioned in the Tenderer's bid.
Special criteria for evaluation if there is sub-sectioning (Railway Board letter no. 2001/CEI/CT/3 dated 12.04.2001). (Railway Board letter no. 2018/CE- I/CT/AP/2 dated 17.04.2016) i. If sub- sectioning has been done with a view to expedite the work then, only one tender will be awarded to one firm. ii. If the same firm becomes L-1 in all the sub-section, then evaluation of the firm for its fitness for award of all or a few tenders should be done for the tender as a whole/under consideration. This is with a view to avoid overloading of the firms beyond their financial capability
In case of more than one L-1 bidders, tender may be awarded to tenderer having higher Bid Capacity. In case Bid Capacity is also the same tenderer having done more value of similar work in last three previous financial years and the current financial year upto the date of opening of the tender, may be selected for the award instructions with respect to Bid Capacity will follow.
For those conditions for which standard formats have been given in the uploaded document titled- Formats for uploading of various format. The information should only be submitted in these standard formats.
Rates are inclusive of all taxes/octroi, license fee, royalty charges etc. legally leviable by State, Central Govt. and/or any other local authority.
The tenderer shall be required to submit the Bid Security with the tender for the due performance with the stipulation to keep the offer open till such date as specified in the tender, under the conditions of tender.
BOOKS OF REFERENCE: These tender documents are to be read with the followings books with versions updated/corrected/modified up to the date of tender opening: 1) Standard General Conditions of Contract April 2022 as amended by updated correction slips termed GCC 2022. 2) DSR-2021 as amended by updated correction slips. 3) E. C. Railway Engineering department unified standard schedule or rates 2021 as amended by updated correction slips (termed USSOR, 2021) up to the date of tender opening. 4) CENTRAL PUBLIC WORKS DEPARTMENT specifications contained in VOLUME-I and VOLUME-II, with updated corrections slips. These four books are where-inafter called the "Books of reference" and shall govern this tender as well as the contract resulting from the acceptance from this tender, to the extent that these contents do not conflict with the contains of the various chapters of these documents.
Balance work with respect to Handing over and taking over of superstructure of ROBs including 3rd party audit for health assessment/ structural inadequacy of newly constructed ROBs at LC No. LC-52, LC-54, LC-55, LC-57, LC-61, LC-62 LC-64, LC-65, LC-66, LC-67, LC-83, ROB at SSM S/L KM 572/33-35 (12 Bow string girder) + 01 RFO/GAQ, etc. by DFCCIL in GC section of DDU Division of E. C. Railway.
02-DDU-XEN-BR-26-27~ECR
02-DDU-XEN-BR-26-27
Open
Works - General
12 Months
Chandauli, Uttar Pradesh
₹0
₹2.8 L
19 Aug 2026
19 Aug 2026
28 Aug 2026
88 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil | cum | 375 | 205.45 | 77,043.75 |
| 2 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. | cum | 430 | 368.65 | 1,58,519.5 |
| 3 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. | Sqm | 1500 | 14.5 | 21,750 |
| 4 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 45 | 7,365.15 | 3,31,431.75 |
| 5 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 65 | 6,833.4 | 4,44,171 |
| 6 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. | Per bag of cement of 50kg | 350 | 57.15 | 20,002.5 |
| 7 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 215 | 8,364.2 | 17,98,303 |
| 8 | 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 108 | 10,185.05 | 10,99,985.4 |
| 9 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 250 | 307.95 | 76,987.5 |
| 10 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 520 | 766.55 | 3,98,606 |
| 11 | Lintels, beams, plinth beams, girders, bressumers and cantilevers | Sqm | 305 | 608.35 | 1,85,546.75 |
| 12 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 260 | 804.25 | 2,09,105 |
| 13 | Stairs, (excluding landings) except spiral-staircases | Sqm | 150 | 657.75 | 98,662.5 |
| 14 | Under 20 cm wide | Metre | 132 | 181.9 | 24,010.8 |
| 15 | Weather shade, Chajjas, corbels etc., including edges | Sqm | 45 | 814.95 | 36,672.75 |
| 16 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg | 33000 | 89.65 | 29,58,450 |
| 17 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum | 85 | 6,882 | 5,84,970 |
| 18 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum | 150 | 8,512.1 | 12,76,815 |
| 19 | Cement mortar 1:3 (1 cement : 3 coarse sand) | Sqm | 35 | 862.9 | 30,201.5 |
| 20 | Cement mortar 1:4 (1 cement :4 coarse sand) | Sqm | 25 | 1,018.05 | 25,451.25 |
| 21 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 150.5 | 1,063.45 | 1,60,049.23 |
| 22 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 31.22 | 1,881.95 | 58,754.48 |
| 23 | Fixed to openings /wooden frames with rawl plugs screws etc. | Kg | 850 | 197.7 | 1,68,045 |
| 24 | 250x16 mm | Each | 14 | 234.9 | 3,288.6 |
| 25 | 300x10 mm | Each | 24 | 117.65 | 2,823.6 |
| 26 | 125 mm | Each | 24 | 60.05 | 1,441.2 |
| 27 | Twin rubber stopper | Each | 18 | 62.25 | 1,120.5 |
| 28 | 1.0 mm thick | Sqm | 61 | 764 | 46,604 |
| 29 | Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (+/- 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge. | Metre | 99 | 462.25 | 45,762.75 |
| 30 | Decorative finish (wood grained finish) | Sqm | 31.52 | 4,018.4 | 1,26,659.97 |
| 31 | Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 +/- 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). | Sqm | 34.2 | 10,030.3 | 3,43,036.26 |
| 32 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 750 | 111.95 | 83,962.5 |
| 33 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | Kg | 1050 | 142.3 | 1,49,415 |
| 34 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | Kg | 250 | 612.25 | 1,53,062.5 |
| 35 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. | Kg | 314 | 103.7 | 32,561.8 |
| 36 | Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with local sand, with common burnt clay non modular bricks. | Sqm | 705 | 733.3 | 5,16,976.5 |
| 37 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. | Sqm | 57 | 935.6 | 53,329.2 |
| 38 | Size of Tile 600 x 600 mm | Sqm | 270 | 1,286.6 | 3,47,382 |
| 39 | Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent | Sqm | 135 | 3,908.8 | 5,27,688 |
| 40 | 110 mm diameter | Metre | 40 | 319.75 | 12,790 |
| 41 | 110 mm bend | Each | 20 | 132 | 2,640 |
| 42 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 222 | 671.55 | 1,49,084.1 |
| 43 | 1:4 (1 cement: 4 coarse sand) | Sqm | 2050 | 307.25 | 6,29,862.5 |
| 44 | 1:4 (1 cement: 4 coarse sand) | Sqm | 1950 | 354.5 | 6,91,275 |
| 45 | 1:3 (1 cement: 3 fine sand) | Sqm | 45 | 421.5 | 18,967.5 |
| 46 | Neat cement punning. | Sqm | 850 | 67.8 | 57,630 |
| 47 | New work (two or more coats) over and including water thinnable priming coat with cement primer | Sqm | 3150 | 162.55 | 5,12,032.5 |
| 48 | New work (Two or more coats applied @ 3.84 kg/10 sqm) | Sqm | 1700 | 97.6 | 1,65,920 |
| 49 | Two or more coats on new work | Sqm | 300 | 131.45 | 39,435 |
| 50 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | Sqm | 3150 | 123.85 | 3,90,127.5 |
| 51 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | cum | 2.15 | 2,007.1 | 4,315.27 |
| 52 | Of area 3 sq. metres and below | Each | 10 | 302.7 | 3,027 |
| 53 | For thickness of tiles 10 mm to 25 mm | Sqm | 65 | 60.5 | 3,932.5 |
| 54 | Asbestos Cement sheet | Sqm | 180 | 63.75 | 11,475 |
| 55 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | Sqm | 1050 | 45.05 | 47,302.5 |
| 56 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | cum | 60 | 219.35 | 13,161 |
| 57 | Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid for separately).(Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately). | cum | 65 | 8,277.55 | 5,38,040.75 |
| 58 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Each | 6 | 5,781.35 | 34,688.1 |
| 59 | White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap | Each | 6 | 1,913.75 | 11,482.5 |
| 60 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. | Each | 6 | 1,500.05 | 9,000.3 |
| 61 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. | Each | 6 | 886.25 | 5,317.5 |
| 62 | 32 mm dia | Each | 15 | 90.95 | 1,364.25 |
| 63 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | Each | 6 | 1,411.15 | 8,466.9 |
| 64 | Sand cast iron S&S pipe as per IS: 1729 | Metre | 85 | 1,018.05 | 86,534.25 |
| 65 | 100 mm dia pipe | Each | 25 | 163.45 | 4,086.25 |
| 66 | For 100 mm dia pipe | Each | 18 | 308.45 | 5,552.1 |
| 67 | Sand cast iron S&S as per IS - 1729 | Each | 15 | 530.7 | 7,960.5 |
| 68 | Sand cast iron S&S as per IS - 1729 | Each | 10 | 671.2 | 6,712 |
| 69 | 25 mm dia nominal bore | Metre | 85 | 491.2 | 41,752 |
| 70 | 15 mm dia nominal bore | Metre | 90 | 485.2 | 43,668 |
| 71 | 50 mm dia nominal bore | Metre | 55 | 654.2 | 35,981 |
| 72 | 50 to 80 mm nominal bore | Each | 3 | 1,513.7 | 4,541.1 |
| 73 | 15 mm nominal bore | Each | 6 | 303.85 | 1,823.1 |
| 74 | 25 mm nominal bore | Each | 5 | 399.15 | 1,995.75 |
| 75 | 15 mm nominal bore | Each | 4 | 262.3 | 1,049.2 |
| 76 | 25 mm nominal bore | Each | 2 | 369.35 | 738.7 |
| 77 | 50 mm nominal bore | Each | 6 | 706.7 | 4,240.2 |
| 78 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Litre | 2000 | 9.7 | 19,400 |
| 79 | 15 mm nominal bore | Each | 10 | 715.05 | 7,150.5 |
| 80 | 15 mm nominal bore | Each | 6 | 594.75 | 3,568.5 |
| 81 | 15mm nominal bore | Each | 14 | 500.35 | 7,004.9 |
| 82 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. | Each | 15 | 61.7 | 925.5 |
| 83 | 25 mm nominal bore, 152mm long, weighing not less than 440 gms | Each | 5 | 459.4 | 2,297 |
| 84 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. | Each | 8 | 96.75 | 774 |
| 85 | 15 mm nominal bore with 45 cm length | Each | 12 | 107.9 | 1,294.8 |
| 86 | 300 mm dia piles | Metre | 636 | 2,560.9 | 16,28,732.4 |
| 87 | 300 mm dia piles | Each | 106 | 2,182.6 | 2,31,355.6 |
| 88 | Initial test (Test Load 2.5 times the Safe capacity) | Each Test | 1 | 51,510.6 | 51,510.6 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ClarificationregardingsubmissionofAnnexure-VofGCC.pdf
ATTACHMENT
SystemofVerificationofTendererCredentials.pdf
ATTACHMENT
InclusionofUDIN.pdf
ATTACHMENT
AdvanceCorrectionSlip1to10.pdf
ATTACHMENT
GCC2022.pdf
ATTACHMENT
02TDBalanceWork.pdf
ATTACHMENT
2026_08_12IndianRailwaysStandardGeneralConditionsofContractApril2022AdvanceCorrectionSlipNo_12_compressed.pdf ACS 12
ATTACHMENT
2026_08_12IndianRailwaysStandardGeneralConditionsofContractApril2022AdvanceCorrectionSlipNo_12_compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].