Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.6 LAccepted-AOC GAIRKATA ROAD POST BINNAGURI PIN 735 203 DIST JALPAIGURI W B | JALPAIGURI | WEST BENGAL | 735203 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹38.6 L+₹1.0 L (2.72%)Rejected-Finance TELEPARA HATKHOLA PO BINNAGURI 735203 DISTT JALPAIGURI W B | JALPAIGURI | WEST BENGAL | 735203 | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹40.8 L+₹3.2 L (8.57%)Rejected-Finance NIL | THE NILGIRIS | TAMIL NADU | 638451 | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹40.9 L+₹3.3 L (8.91%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 5 | L5₹42.1 L+₹4.5 L (12.1%)Rejected-Finance BANKIM CHANDRA ROAD HAKIMPARA SILIGURI DIST DARJEELING PIN 734001 W B | JALPAIGURI | WEST BENGAL | 734001 | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹44 Cr
EMD Value
₹88,000
Closing Date
4 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (SOUTH) BINNAGURI
GE (SOUTH) BINNAGURI, PO - BINNAGURI, DISTT - JALPAIGURI, PIN - 735232
CERTAIN COMPREHENSIVE REPAIRS TO B/R ITEMS OF MD AND OTM ACCN AT WEST SIDE OF LEHL MARG UNDER GE (S) BINNAGURI
2022_MES_524198_1
8492/E8
Open Tender
Civil Works
Item Rate
180 days
GE (SOUTH) BINNAGURI
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
Yes
GE (SOUTH) BINNAGURI
₹88,000
Yes
27 Jun 2022
14 May 2022
6 Jun 2022
14 May 2022
4 Jun 2022
28 May 2022
Amount
Schedule 'A'
Taking down Chowkhats or frames exc. 1.5 sqm but not exe 4.00 sqm each but with shutters (without taking off shutters from the frames) complete all as specified and directred
Taking down Chowkhats or frames not exc. 1.5 sq. m each but with shutters (without taking off shutters from the frames) complete all as specified and directred
Taking down shutters of any description exc. 1 Sqm and n.exc 2 Sqm complete all as specified and directred
Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and as directed
Taking down plaster on brick or stone wall, ceiling etc incl racking out joints hacking for keys scrubbing down with water etc. Complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for Complete all as specified and as directed.
Hacking out old broken unserviceable glass panes (any thickness, size, quality or description) for metal frame including punching or drilling out old glazing pins/spring clips.
Demolition of brick masonary work, built in cement mortar including all quions, arches, pillars, etc. but excluding precast concrete articles etc. and deposited where directed complete all as specified and directed.
Demolation of un-reinforced cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
Dismantling old PGI/CGI sheeting any gauge, thickness, including Nainital. Sikkim or similar pattern roof/facia etc complete all as specified and directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. for receieving top layer complete all as specified and directed.
M& L for vetrified ceramic tiles 10 mm thick (square/rectangular) light shade, area of each tiles not exceeding 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete over 15mm thick screed bed in CM(1:6) complete all as specifierd and as directed.
M& L for vetrified ceramic tiles 10 mm thick (square/rectangular) light shade, area of each tiles not exceeding 0.36 sqm in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in Vertical surface including 10 mm thick screed bed in cement mortor 1:4 complete all as specified and directed.
M&L for non skid coloured joint free ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc. 0.18 Sqm but n. exc. 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor including 15mm thick screed bed in cement mortor 1:6 complete all as specified and directed.
M&L for non skid coloured joint free ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc. 0.18 Sqm but n. exc. 0.38 Sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in Vertical surface including 10 mm thick screed bed in cement mortor 1:4 complete all as specified and directed.
M&L for non skid coloured joint free ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc. 0.11 Sqm but n. exc. 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor including 15mm thick screed bed in cement mortor 1:6 complete all as specified and directed.
M&L for glazed coloured ceramic tiles (450x350x7mm thick) on vertical surfaces such as skirting/dado set and jointed in neat cement slurry pointed in white or coloured cement to match over 15mm thick rendering in CM(1:4) complete all as specified and directed .
M & L for 18 to 20 mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms,corner shelf,Flat shelf and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 15 mm thick cement plaster (1:4) including rounded the exposed surfaces of granite complete all as specified.
All as per item No- 20 here- in- above but as in skirting ( 12 to 15 mm thick) and on 10 mm tkick rendering/ back coating in CM (1:4) - ditto --
M&L for high tensile 550 MPA yield strength Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering The sheet shall have a hot dip metallic zinc aluminium alloy coating of zinc 43.5%, aluminium (55%)and silicon (1.5%) with total mass coating of 150 gms/sqm on both sides. Covered width will be 1020mm and sheet length as per site requirement. The profile is having return leg for proper side lap. The sheet shall be fixed using self drilling/self capping screws with EDPM seal complete all as specified and directed.
All as per item No- 22 here- in- above but Plain sheets as in ridges/ hips / valley/Eaves and Eaves board - ditto --
M&L for mild steel rolled sections conforming to Fe - 410 (Gde E-250) as in main and cross beams, hip and jack rafters; verticals , purlins where connected to common rafter and running rails and guides for sliding doors fixed with angle cleats or other connecting plates painting one shop of zinck chromimum pimer paint including preparation of surfaces at contractor workshop before fabrication complete all as specified and directed complete all as specified and directed.
M&L for MS flat iron bent to shape, holes drilled etc. complete as in wind ties etc including one coat of red oxide paint complete all as specified and directed.
S&F rolled mild Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of grade Fe410W (Gde E-250) quality A complete all as specified and directed.
M&L for 75mm thick plain cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection and footpath finished even and smooth without using extra cement, including making joints to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:2 by weight complete all as specified and as directed.
M&L for PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in sub base flooring 25 mm thick surface finished even and rough to receive the topping layer completed all as specified and directed
M & L PCC (1:3:6) type C1 (20mm graded aggregate) as in bed block for fillinghollow space of steel chowkhats, fixing of hold fast, coping, slightly rounded or chamfered on edges, finished even and smooth on exposed concrete surface without using extra cement all complete as specified and as directed.
M&L for PCC 1:4:8 Type D2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.
M&L for broken stone or boulders hardcore of gauge not exceeeding 63mm, deposited , spread and levelled in layer ot exceeding 15cm thick, watered and rammed to a true surfaces completed all as specified and directed .
S&F of 3mm thick plain glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as directed.
S&F of Figured glass, pin head type 4mm thick in squares n.exc 0.50 Sqm in each pane complete all as specified and as directed.
S&F 4mm thick non-Asbestos fibre cement building board( E-board) false ceiling with board of size 600x600mm with powder coated GI snap grid frame work including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type B0 Cement mortar 1:3 complete all as specified and directed including all necessary drilling and necessary arrangement to fix electrical items as under:- (a) 27x27x0.55mm thick GI angle powder coated duly plugged @ 600mm centre to centre along perimeter of wall. (b) 25x25x0.55mm thick GI tee powder coated as main and cross runners suspended with 1.6mm dia GI wire suspenders(n.exc 1.2mtr length) with adjustable clamps and dash true fastners plugging in RCC slab/A.I Runner of slopped roof placed @ 600mm centre to centre from perimeter of wall. (c) Fixing of 4mm thick non-Asbestos fibre cement building board( E-board) false ceiling with board of size 600x600mm of approved texture and finished complete with two coats of oil based distemper over a coat of alkali resistance primer on ceiling. NOTE: The complete ceiling work shall be done as per manufactures instruction and as directed.
S&F for pressed steel frames 125x60mm size for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete all as specified and directed.
S&F for pressed steel frames 105x60mm size for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete all as specified and directed.
S&F 35mm thick second class hard wood rail and style Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.
M&L second class Hard wood 35mm thick factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, complete all as specified and directed.
Restraining and rescuring of aluminium section of shutter and frame, including proper adjustment of floor spring, and fixing of new rubber gasket etc of existing door for proper functioning of each shutter n exc 2 sqm Complete all as specified and as directed.
Repairs for wooden Doors shutters and windows for proper closing/opening including necessary cutting, filling, painting with synthetic enamel paint to match existing finishes Complete all as specified and as directed.
S & F in repair factory made UPVC white colour Sliding window three track (Area n exc 2.0 Sqm each) made of extruded profiles with wall thickness of 2.3 mm (+- 0.2mm) window profiles with jollow section with multi chamber, frame (88 mm x 52 mm ), sliding sash (42 mm x 67 mm) sliding mesh sash (42 mm x 57 mm ) sliding interlock (one vertical length in each shutters) ( 45.50 x 28 mm), glazing bead (24.5 mm x 16 mm ) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket, 1.2 +- 0.2 mm thick galvanised steel frame (30 x 18 mm ) 2 nos sliding sah (30mm x 18 mm) sliding mesh sash (26 mm x 10 mm) profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners, hardware (Touch Lock of Zinc alloyed ( white power coated) steel roller system, stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and required accessories.
S & F in repair factory made UPVC white colour fixed glazed window/ ventilator made of (small series) frame 47x 50 mm mullion 47x68 mm both having wall thickness 1.9 +/- 0.2mm and single glazed bead appropriate dimention(Area upto 0.75 sqm) comprising of UPVC multi chambered frame and mullion (where ever required0 extruded profiles duly reinforced with 1.60 +/- 0.2mm thick galvanized mild steel section made from rolled forming process of required length (shape and size according to UPVC) profile), UPVC extruded glazing beads of appropriate dimentions, EPDM gasket, GI fastners 100x8mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profiles of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded incl drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled weather froof silicon sealant over backer rod of required size and approved quality, all complete as per approved drawing & directions of Engr-in-Charge(Glass shall be paid separately) Note: For UPVC frame, sash and mullion extruded profiles minus 5% tolerence in dimentions i.e. in depth & width of profile shall be acceptable. Variation in profile dimention in higher side shall be accepted but no extra payment on this account shall be made.
M & L for fabrication and fixing of anodised powder coated aluminium door shutter fixed with rubber gasket, stopper, cleats, handles etc complete for aluminium frame of size 101.6 mm x 44.45 mm x2 mm and section of bottom and top rail iof section 114 mm x 44.45 mm x 2mm and lock rail shutter frame of 83 mm x 44.45 x 2 mm with and including panels of 5.5 mm thick plain/ forsted float glass, and with anodised aluminum snap beading of size 18.20 mm x 16.66 mm scred for fixing fully including all neceassary fittings and EPDM rubber packing each shutter shall be provided with two decorative type aluminium disc handle of 150 mm dia per shutter, 1 no heavy duty door shutter 1 o 200 mm long aluminium tower bolt and 3nos 125 mm long stainless steel butt hinges per shutter including taking down old one complete all as specified and as directed .
S&F Powder coated aluminium window sliding type three track (2 glazed & one gauze shutter ) aluminium sections weighing not less than 1.67kg/m for frame and 0.55 kg/m for shutter including necessary jointing cleats, glazing cleats, rubber packing , screws, handle, locking arrangement and 5.5mm thick plain/tinted glass and aluminium mosquito proof gauge including taking down of old existing steel window and making good disturbed surface of wall complete all as specified and as directed.
S& F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification with Wood free EPS complete all as Specified and as directed.
S&F Powder coated aluminium louvered ventilators of size 600X600mm with glass louvers, without sash bars of aluminium sections weighing not less than 0.605kg/m for frame of size 40x20x2mm including necessary jointing cleats, glazing cleats, rubber packing , anodised aluminium snap beading,screws, anodised aluminium fittings and 5.5mm thick tinted glass fixed in panels with suitable locking arrangements including taking down of old existing steel ventilator and making good disturbed surface of wall complete all as specified and as directed.
M&L for water proofing treatment to sunken floor with the following course of treatment/ specification: (i) Cleaning top surface of floors /slabs and laying 50 mm thick (avg) PCC of grade M10 (Nominal mix) , mixed with WPC as per manufactrrer's instruction laid in slope 1:20 towards spouts including coveting corners (ii) 15 mm thick plastering in CM (1:4) on sides mixed with WPC as pe rmanufacturer's instruction. (iii) Applying 1st layer of slurry @ 0.488 kg / sqm mixed wth acrylic based polymer modified cementious compound @ 0.253 kg /sqm This layer shall be allowed to air cured for 4 hrs. (iv) applying 2nd layer of slurry @ 0.242 kg/sqm mixed with accrylic based polymer modified cementenous compound @ 0.126 kg/sqm.This layer shall be allowed to air cured for 4hrs followed with water curing for 48 hrs. (v) Applying a coat of industrial bitumen 85/25 penetration @ 1.50 kg/sqm on plastered and concrete surfaces (vi) Providing 150 micron thick polyutethene paint in two coats (each of 75 micron measured dry on dry surface over a coat of PU primer including preparation . (Make of PU primer - Dek guard EP -302 of M/S Fosroc or equivalant approved brand.Make of PU paint - Dek guard PUor equivalant approved brand. (vii) 2 Nos 32mm bore GI medium grade 450mm long spout ,to be provided through external wall to drainout accumulated water. (vii) Sunken floor shall be tested for water tighness by filling water for 72 hrs before and after treatment work is carried out and ensure that no leakage /seepage exists (ix) Sunken portion shall be filled with lean concrete of grade M7.5 stone agreegate
S&F of factory made solid panel PVC door shutter, 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails MS frame shall be covered with heat moulded plain clolur PVC `C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stile and plain clolur PVC sheets for top rail lock rail & buttom rail on either side and as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with slolvent cement, supplying & fixing in the frame at site as per manufactures instruction complete all as specifeid and directed
Solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed incl fixing of hold fast as per specification and drawing complete as directed.
S & F stainless steel wire cloth 0.36 nominal dia wire & average width of aperature 1.40 mm fixed with tinned tacked or galvenised wire staples or wooden beadings for doors complete all as specified and directed
S & F in repair stainless steel wire cloth 0.36 nominal dia wire & average width of aperature 1.40 mm fixed with stainless steel wire staples complete all as specified and directed
S & F Mild steel work in framed work such as in gates,grills, Framed guard bars, gratings, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe 290 Gde E-165.complete all as specified and directed.
M&L for brick work with old size sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L for brick work with old size sub class 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement morter 1:6 finished even and fair without using extra cement complete all as specified and as directed.
M&L for external rendering 20 mm thick in two layer, first layer shall be of 10 mm thick CM 1:6 and second layer of finishing coat shall be 10 mm thick in CM 1:4 mixed with WPC as per manufacturer instruction by weight of cement on brick work or concrete surfaces of wall and finished even and fair complete all as specified and directed. Note-WPC shall be measured and paid seperately.
M&L for rendering 5mm thick in CM 1:3 in ceiling finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
Supply only integral water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed.
M&L for prepartion of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of cement based wall care putty including complete removal of existing treatment all as specified and directed.
M&L for preparing of newly plastered surfaces of wall including cornices etc by brooming down applying two coats of antifungal exterior acrylic emulsion paint over a coat of acrylic primer complete all as specified and directed.
M&L for preparattion of newly plastered surfaces of ceiling and applying three coat of white wash complete all as specified and diredted.
Cutting chases, pinning in, making good to facing where required and pointing in CM 1:3 for concealed water tubing conduit wiring etc and making good, cutting n.exc 10cm girth as in stone or concrete block walls or slab walls
Taking up or down steel tubing 15mm and connections complete all as specified and directed .
Taking up or down steel tubing 20mm and connections complete all as specified and directed .
S& F 15 mm bore steel water tubes, medium grade, galvanised with all fitings and fixed to wall, complete all as specified and directed.
S& F 20 mm bore steel water tubes, medium grade, galvanised with all fitings and fixed to wall, complete all as specified and directed.
Refixing old serviceable 15 mm bore steel water tubes after cleaning fixed to wall complete all as specified and directed.
Refixing old serviceable 20 mm bore steel water tubes after cleaning fixed to wall complete all as specified and directed.
S&F in repair sliding door bolt of 250mm long plate Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S&F sliding door bolt of 250mm long plate Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S&F aluminium handle cast type anodiside of 150 mm size complete all as specied and directed.
S&F in repair aluminium handle cast type anodiside of 150 mm size complete all as specied and directed.
S&F 150 mm long Aluminium anodised barrel tower bolts complete all as specified and directed.
S&F 100 mm stainless steel butt hinges etc complete all as specified and directed.
S&F in repair 100 mm stainless steel butt hinges etc complete all as specified and directed.
S&F in repair PVC flushing cistern symphonic action type,10 ltrs capacity,low level white with inlet ball valve,float and handle including bracket including flush pipe complete all as specified and as directed.
S & F in repair for vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor to match with existing specifications as specified.
S&F in repair only Vitreous China wash down EWC , white (exluding fixing bolts, flushing cistern and flush pipe with and including PVC seat cover complete all as specified and as directed.
S&F in repair 15mm bore health faucet of ABS material, chromium plated polishing with 1M pvc flexible hose, trigger control complete all as specified and as directed.
S&F in repair vitreous china wash basin, white, flat back, size 550x400m excluding taps, waste , chain & plug & porcelain stopper including brackets incl cutting for pinning in ends of bracketes or erecting stand and fixing and supply and waste pipe complete all as specified and directed.
S&F of PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.
S&F in repair bib taps, fancy type chromium plated with crutch or butterfly hadle screwed down, screwed for iron pipe or brass ferule of 15mm bore complete all as specified and as directed.
S&F in repair stop valve,fancy type chromium plated screwed down,high pressure with crutch or butterfly handle,screwed both end for iron pipe or for union of 15mm bore complete all as specified and directed.
S&F in repairs angle valve, fancy type chromium plated, brass, 15mm bore complete all as specified and directed.
Supply and fixed in repairs sinks without drainage board made of stainless steel 304 super steel grade 1mm thick sheet plugs, washers and waste pipe, including a pair of cantilever brackets embedded in wall with suitable size of PCC (1:3:6) type C-1 blocks and connecting union to pipe of overall size 460mm x 405mm bowl size 405mm x 354mm x 203mm all complete as specified and as directed.
S&F in repair 1.00 mm thick stainless steel plate rack of size 31"x30"x10" complete all as specified and directed.
S&F in repair 15mm pillar tap,cast copper alloy, with capstan head, chromium plated, fancy type screwed down high pressure,with or without lettered "hot" or "cold" with long screwed shank and fly nuts screwed for iron pipe of 15mm bore complete all as specified and as directed.
S&F in repair Brass CP mixer for mixing hot & cold water screweddown for iron pipeand fixed complete all as specified and directed.
S&F in repair Brass CP central hole basin mixer for WHB complete all as specified and directed.
S & F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed on wall complete all as specied and directed
S&F in repair PVC (SWR) bends with access door of 110mm bore any radius complete all as specied and directed.
M&L in repairs for CI Nahani trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1 (diameter of outlet 100mm) complete all as specied and directed.
S& F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.
S & F in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed on wall complete all as specied and directed
S&F in repair PVC (SWR) bends with access door of 75mm bore any radius complete all as specied and directed.
M/S MAJUMDER CONSTRUCTION
SG ENTERPRISE
BINOD TRADING CO.
M/s. MD IRSHAD
samrat saw mill and joinery workshop
R K AGARWAL
M/S MOHAN KUMAR BANSAL
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
BOQ_585750.xls
BOQ Document • 0.56 MB
98161083.pdf
Tender Document • 0.46 MB
tenderdocs..rar
Tender Document • 2.01 MB
98161085.html
Tender Document • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .