Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.9 LAdmitted-Fee/PreQual/Technical/Finance | ₹34.9 L | L1 | Admitted-Fee/PreQual/Technical/Finance |
| Sl No | Description | Qty | Unit | Kittu Electricals private limited L1 |
|---|---|---|---|---|
| 1.00Panel Work | ||||
| 1.01 | Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays,
indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 2.00mm CRCA sheet, powder coated (excluding base frame). The panel shall be fabricated by a CPRI-approved fabricator. Based on the request of the Assistant Engineer (Electrical), the purchase order shall be confirmed by the fabricator. Inspection of the panel during fabrication may be carried out at the discretion of the Assistant Engineer (Electrical), if deemed necessary, to ensure quality compliance. All sheets used in the panel shall be fabricated using CRCA material of uniform thickness. Irrespective of whether the inspection is conducted, the responsibility for the quality and performance of the panel shall rest solely with the contractor to whom the work is awarded by CUSAT. All Factory Acceptance Test (FAT) certificates, in accordance with the latest IS/IEC or other applicable standards, shall be submitted along with the panel. | 102 | Sq.m | 3,000 ₹3,06,000 Lowest |
| 1.02 | Supply and providing 3mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc | 16 | Sq.m | 3,000 ₹48,000 Lowest |
| 1.03 | Supply and providing heavy duty 'A' section neoprene gasket in the panel board U' section rubber beeding suitable for 1.60/ 2.00 mm sheet | 250 | m | 8 ₹2,000 Lowest |
| 1.04 | Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC) | 30 | metre | 1,100 ₹33,000 Lowest |
| 1.05 | Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board | 5 | Kg | 140 ₹700 Lowest |
| 1.06 | Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. As required. | 96,000 | Cu.Cm | 13 ₹12,48,000 Lowest |
| 1.07 | Supply and providing copper earth bus in the panel board | 7,000 | Cu.Cm | 12.5 ₹87,500 Lowest |
| 1.08 | 800 A, 4 pole, electrical draw out type, microprocessor based ACB with overload , instantaneous SC , delayed SC and ground fault protection 50kA | 3 | no | 1,30,000 ₹3,90,000 Lowest |
| 1.09 | Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.250A, 35/36 kA (Ics=100%Icu), 4 pole, current limiting type MCCB with microprocessor based release with overload setting of 50 -100% having adjustable OL & SC | 9 | no | 28,000 ₹2,52,000 Lowest |
Tender Value
₹29.2 L
EMD Value
₹50,000
Closing Date
2 Jun 2026, 3:00 pmClosed
THE REGISTRAR
CUSAT, COCHIN- 22
Replacement of obsolete panel with new MSB at Substation No.1 including cabling and termination works, CUSAT Thrikkakara Campus
2026_CUSAT_838946_2
CUSAT/ET/UEU/5285/25-26
Open Tender
Electrical Works
Item Rate
90 days
CUSAT, Thrikkakara Campus
Terms and conditions
6 documents required · 6 mandatory
₹2,950
₹50,000
6 Jun 2026
15 May 2026
6 Jun 2026
15 May 2026
2 Jun 2026
15 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Panel Work | |||||
| 1.01 | Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays,
indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 2.00mm CRCA sheet, powder coated (excluding base frame). The panel shall be fabricated by a CPRI-approved fabricator. Based on the request of the Assistant Engineer (Electrical), the purchase order shall be confirmed by the fabricator. Inspection of the panel during fabrication may be carried out at the discretion of the Assistant Engineer (Electrical), if deemed necessary, to ensure quality compliance. All sheets used in the panel shall be fabricated using CRCA material of uniform thickness. Irrespective of whether the inspection is conducted, the responsibility for the quality and performance of the panel shall rest solely with the contractor to whom the work is awarded by CUSAT. All Factory Acceptance Test (FAT) certificates, in accordance with the latest IS/IEC or other applicable standards, shall be submitted along with the panel. | - | Sq.m | - | - |
| 1.02 | Supply and providing 3mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc | - | Sq.m | - | - |
| 1.03 | Supply and providing heavy duty 'A' section neoprene gasket in the panel board U' section rubber beeding suitable for 1.60/ 2.00 mm sheet | - | m | - | - |
| 1.04 | Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC) | - | metre | - | - |
| 1.05 | Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board | - | Kg | - | - |
| 1.06 | Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. As required. | - | Cu.Cm | - | - |
| 1.07 | Supply and providing copper earth bus in the panel board | - | Cu.Cm | - | - |
| 1.08 | 800 A, 4 pole, electrical draw out type, microprocessor based ACB with overload , instantaneous SC , delayed SC and ground fault protection 50kA | - | no | - | - |
| 1.09 | Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.250A, 35/36 kA (Ics=100%Icu), 4 pole, current limiting type MCCB with microprocessor based release with overload setting of 50 -100% having adjustable OL & SC | - | no | - | - |
stage.html
html • 0.01 MB
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.21 MB
Tenderform.pdf
Tender Documents • 1.65 MB
Agreementform.pdf
Additional Documents • 0.01 MB
Epaymentform.pdf
Additional Documents • 0.05 MB
ApprovedMakeList-Electrical.pdf
Other Document • 0.27 MB
BOQ_1437607.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .