8537/E8

Amount

Demolition of cement concrete (unreinforced) in ground floor and paving n exc 15 cm thickness ( below or above ground level) all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L 25 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregates) as in levelling course in flooring finished even & rough to receive top flooring all as specified and directed.

M&L for Non skid joint free ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exc. 0.38 Sqm, in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles laid over screed bed or bedding layer of cement mortar 15 mm thick in CM 1:6 all as specified and directed.

M&L for Non skid joint free ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exc. 0.11 sqm, in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles, laid over screed bed or bedding layer of cement mortar 15 mm thick in CM 1:6 all as specified and directed.

M&L light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles, laid over screed bed or bedding layer of cement mortar 15 mm thick in CM 1:6 all as specified and directed.

Demolition of stone slab and tiles af any description or thicknessin floors, aprons laid dry and pointed all as specified and directed.

M&L machine cut kota stone slab flooring 18-20 mm thick laid over cement screed bed in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shades of the slab including rubbing and mirror polishing all as specified and directed.

M&L PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete all as specified and directed.

M&L prepolished chequered cement concrete tiles 25cm x 25cm/ 30cmx30 cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors, laid over 20 mm thick screed bed in CM 1:6 all as specified and directed.

M&L PCC 1:2:4 type B-2 (using 40 mm graded crushed stone aggregate) as in surface channel and drain all as specified and directed.

M&L precast cement concrete 1:3:6 type C1 using 20mm graded crushed stone aggregate as in solid building blocks, exc. 10cm in width and setting in CM (1:6) all as specified and as directed.

M&L for rendering 15 mm thick in CM 1:4 using river sand on brick or concrete surfaces, finished surfaces even and smooth without using extra cement including mixing of water proofing compound as per manufacturer instructions (water proofing compound shall be measured and paid separately) all as specified and as directed.

Supply only integral water proofing compound @3% by weight of cement or as per manufacturer instructions all as specified and as directed.

Extra for forming fair finished drain and channel 30 cm inner grith in cement concrete using extra cement in forms mould mitred/stopped ends all as specified and directed.

M&L providing precast cement concrete type B-1, 1:2:4 (20 mm graded crushed stone aggregate) as in landing, cover slab (for manholes etc) chullah hoods, chajjas, water trough mangers, shelves, and similar articles with plain faces all as specified and as directed.

M&L TMT bars 10 mm dia & over, cut to length, bent to shape required including crancking bending spirally for hoping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9 mm dia or securing with clips in quality all as specified and directed.

M&L PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in coping including form work all as specified and directed.

Removal of water from septic tank by pumping/manually in foul position as specified and removing to out side MD land all as specified and directed.

Removing of sludge mixed with water nexc 50 m and depositing where directed at a level n exc 1.5 m above the starting point in soil working in foul position all as specified and directed.

Cleaning of existing sewage lines of any size by rodding with split bamboo or any other means as approved and removal of blockage including taking out existing RCC cover slabs of manholes of any size without damaging the slab covers to facilitate cleaning and replacing back in original position & cleaning debris/sludge in pipe line of any type complete all as specified & directed.

Cleaning of manhole of any size by removing of sludge mixed with water n exc 50 M away from the point ll as specified and directed.

Material and labour for cleaning of blockage of water closet (Indian or European) , trap & CI pipe line upto first manhole. by manually or by rodding, pumping, and removing the deposited sludge/solid/liquid material , outside MD land all as specified & directed

All as per item No 25 here in before but floor trap/nahni trap of kitchen/bathroom upto gully trap (excluding gully trap).

All as per item No 25 here in before but gully trap upto first manhole.

Dismantling of 150 mm dia CI pipe, jointed in cement mortar and taking out of trenches if required all as specified and directed.

Dismantling of 100 mm dia CI pipe, jointed in cement mortar and taking out of trenches required all as specified and directed.

M&L 150 mm dia CI pipe (sand cast) soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floors all as specified and directed.

All as per item No 30 here in before but except pipe all as specified and directed.

M&L 100 mm dia CI pipe (sand cast) soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floors all as specified and directed.

M&L concrete bed to 150 mm dia drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L concrete bed to 100 mm dia drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

S&F in repairs 110mm bore PVC (SWR) pipe single cocketed in any length with rubber ring joints fixed to wall as specified and directed.

S&F in repairs 75 mm bore PVC (SWR) pipe single cocketed in any length with rubber ring joints fixed to wall all as specified and as directed.

S&F PVC (SWR) bends of any radius 110mm bore all as specified and directed.

M&L 75mm PVC(SWR) floor trap, plain with grating including jointing with solvent cement all as specified and as directed.

S&F in repairs for vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including provision of lime concrete bedding all as specified and directed.

S&F in repairs for Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) all as specified and directed.

S&F 100 mm bore cast iron P or S trap all as specified and directed.

S&F PVC (SWR) 'S' trap 125/110 mm bore all as specified and directed.

Taking up or down 15 mm bore steel tubing and connection including cleaning for re-fixing or removal to store all as specified and directed.

Taking up or down 20 mm bore steel tubing and connection including cleaning for re-fixing or removal to store all as specified and directed.

S&F 15 mm bore GI tubing medium grade with all fittings, fixed to wall and ceiling or laid in floor all as specified and directed

S&F 20 mm bore GI tubing medium grade with all fitting fixed to wall and ceiling or laid in floor all as specified and directed

Refixing 15 mm bore old steel tubing and connection in new or old position (wall, ceiling,floors etc) all as specified and directed

Dismantling of water tank and removing to store exc 250 litre but not exc 500 litres all as specified and directed.

Dismantling of water tank and removing to store exc 500 litre but not exc 1000 litres all as specified and directed.

S&F rotational moulded PVC water storage tank 500 litres capacity conforming to IS-12701(1989) cylindrical vertical type multi-layered with closed top including inlet, outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I (Make:SINTEX/POLYCON) including 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) all as specified and directed.

S&F rotational moulded PVC water storage tank 1000 litres capacity conforming to IS-12701(1989) cylindrical vertical type multi-layered with closed top including inlet, outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I (Make:SINTEX/POLYCON) including 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) all as specified and directed.

Supply and fix in repair vitreous china urinal, bowl type, flat back, of size 465 x 355 x 265mm (minimum), white, including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60cm long brass screws, pointing around urinal back in cement, with grating and union for discharge pipe and PVC waste pipe, including making all connections to existing connections, fixed complete all as specified and as directed.

S&F in repair vitreous china wah hand basin (550x400 mm) white flat back excluding taps, waste chain and plug and porcelain stopper but including brackets all as specified and directed.

S&F in repair 32 mm bore waste fittings brass chromium plated for glazed ware sink, basin with long screwed shank and fly nut , flange and bedded in red lead cement and other end fixed all as specified and directed.

S&F in repair pillar tap cast copper alloy with capstan head, chromium plated screwed down high pressure with or without lettered 'Hot or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe all as specified and directed.

S&F in repair pillar tap cast copper alloy with capstan head, chromium plated screwed down high pressure with or without lettered 'Hot or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe all as specified and directed.

S&F in repair flushing cistern low level, PVC 10 litres capacity syphonic action type valve, valve less with inlet ball valve,float and handle including bracket all as specified and directed.

S&F in repair flush pipe of polythene of low or high density or PVC, 32 mm dia for low level cistern all as specified and directed.

Supply and fix in repair for PVC (HDPE), 32 mm dia, polythelene, of pressure rating 6 kgf/sqcm, fixed to wall, ceiling or in floor, for wash hand basin all as specified and directed.

S&F in repair PVC connection 15 mm dia and 450 mm long all as specified and as directed.

S&F in repair soap dish acrylic type all as specified and directed.

S&F in repair sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantiliver bracket and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mmx 330 mm x 160 mm all as specified and as directed.

Supply and fix in repair 15 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 142 gms.) all as specified and directed.

Supply and fix in repair for 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 210gms.) all as specified and directed.

S&F in repairs 15mm dia bib taps, cast copper alloy screwed down high pressure, with crutch or butterfly handle screwed with both ends for iron pipe or for brass ferrules all as specified and directed.

S&F in repairs 15mm bib tap standard of PTMT any colour high pressure screwed for iron pipe & fixed (minimum weight 90gms) and all as specified and directed.

All as per item no. 67 here in before but long body (minimum weight 120 gm) all as specified and directed.

Supply and fix in repair PVC water closet seat cover, black or white, closed pattern, with flat bottom and cover and mild steel chromium plated or aluminised hinging device, all as specified and directed

S&F in repair CP grating of size 100 mm dia all as specified and directed.

S&F in repair brass CP mixer 15 mm bore for mixing hot and cold water screwed down for iron pipe or any type of pipe and fixed in position and making good disturbed portion all as specified and directed.

S&F in repair cast copper alloy chromium plated central hole basin mixer, fancy type with long spout quarter turn operated type with 02 Nos PVC connections of best quality all as specified and directed.

S&F in repair for brass chromium plated stop valve/angle valve with plate flange of 15mm bore, fancy type, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions all as specified and directed.

Supply and fix in repair stop valve of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 90gms) all as specified and as directed.

S&F in repairs 15mm dia bib taps, fancy type cast copper alloy screwed down high pressure, with crutch or butterfly handle screwed with both ends for iron pipe or for brass ferrules all as specified and directed.

S&F in repair gun metal gate valve,15mm bore, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions all as specified and directed.

Cleaning , removing all scales, dust, dirt with wire/jute brush from inside of RCC/PVC tanks of capacity exc. 250 litres and not exc. 500 litres and from mouth of connected pipes all as specified and directed.

Cleaning , removing all scales, dust, dirt with wire/jute brush from inside of RCC/PVC tanks of capacity exc. 500 litres and not exc. 1000 litres and from mouth of connected pipes all as specified and directed.

S&F 15 mm dia CP jet with CP flexible pipe 90 cm long including necessary fittings all as specified and directed.

S&F health faucet all as specified and directed.

S&F in repair chromium plated telephonoic shower rose all as specified and directed.

S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with mild steel chromium plated bracket guard and railing 60cm long all as specified and directed.

S&F in repair brass chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed

S&F in repair towel rail, brass chromium plated D type, 600 mm long between flanges all as specified and directed

S&F in repair PVC (SWR) bends, 75 mm bore including taking down old one all as specified and directed.

S&F in repair PVC (SWR) vent cowl 75mm bore all as specified and directed.

S&F PVC over head tank cover for 500 litres capacity tank all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutters from the frame) area exceeding 1.5 Sqm each but not exceeding 4 sqm all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutters from the frame) not area exceeding 1.5 Sqm all as specified and directed.

M&L second class hard wood plain, solid, straight chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and directed.

M&L 35 mm thick flush shutter solid core construction with particle board core and plywood face panels, commercial type on both side all as specified and directed.

S&F second class hardwood, glazed and skeleton shutters, 35mm thick, open rebated and prepared to receive, glass with sash bar, divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass or gauze etc, sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a) fitted to chowkats all as specified and directed.

S&F solid PVC door frame of size 50 mmx47 mm, made out or 5 mm, plain colour PVC sheet, reinforced with MS Square tube all as specified and directed.

S&F factory made solid panel PVC door shutter, 30 mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC 'C' chanel on both sides having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on both sides and as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement and fixing in the frame at site all as per specification & drawing all as specified and directed.

S&F butt hinges medium weight cold rolled mild steel 75 mm all as specified and directed.

S&F butt hinges medium weight cold rolled mild steel 100 mm all as specified and directed.

S&F mild steel barrel tower bolt, stove enamelled black, with bright bolt and fixed 200 mm long all as specified and directed.

S&F mild steel barrel tower bolt, stove enamelled black, with bright bolt and fixed 100 mm long all as specified and directed.

S&F mild steel sliding door bolt, plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolt and nuts, four on bolt plate and two on staple plate 300 mm long all as specified and directed.

S&F mild steel pressed handles, oval type, stove enameled black 150 mm long all as specified and directed.

S&F in repair 300 mm ordinary mild steel rat tail rod pattern springs, including roller and roller plate all as specified and directed.

S&F galvanised mild steel wire clothb 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks or galvanised wire staple all as specified and directed.

S&F in repair galvanised mild steel wire cloth 0.56mm nominal dia wire and average width of aperature 1.18mm and fixed with tinned tacks or galvanised wire staple all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, of 150 mm with rubber shoe and fixed in floor all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description exc 10cm width or girth and applying one coat of 1st quality synthetic enamel paint all as specified and directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of approved colour synthetic enamel paint over a coat of pink primer all as specified and directed.

M&L for preparation of old painted steel surfaces of any description exc 10cm width or girth and applying one coat of 1st quality synthetic enamel paint all as specified and directed.

S&F for aluminium frame for door, window, ventillators, partition wall, shutters including style & rails with standard anodized aluminium section with one or more rebates, including aluminium snap beading (wall thickness of aluminium section not less than 2 mm ) all as specified and directed.

M&L for rubber beading for fixing glass panes in aluminium frame work all as specified and directed.

S&F for prelaminated particle board, 12 mm thick, exterior grade, both side with decorative choice lamination ,fixed with screws fixed to aluminium frame work all as specified and directed.

S&F 200 mm aluminium, anodised barrel tower bolts of extruded section and fixed all as specified and directed.

S&F 125 mm extruded aluminium alloy handles, cast type, anodised all as specified and directed.

S&F door closer hydraulically regulated, designation No 3, aluminium (die cast ) body, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed including taking down old one all as specified and directed.

S&F 20 mm chromium plated pipes for curtain rod all as specified and directed.

S&F chromium plated bracket and knobs for curtain rod all as specified and directed.

Dismantling plain or corrugated steel sheeting of any gauge/thickness including nainital and similar pattern all as specified and directed.

S&F 0.63mm thick corrugated galvanised mild steel sheet with grade of zinc coating 275 gms with two corrugation side lap fixed with L or J type or cranked hook bolts in roof/ wall all as specified and directed.

All as per item No.119 here in before but except sheet all as specified and directed.

S&F 0.63mm thick plain, galvanised mild steel sheeting in ridges,hips, valley gutters drips and straight flashings all as specified with grade of zinc coating 275 gms all as specified and directed.

Dismantling of ceiling board (fibre, pulp, insulation etc) any thickness including cover fillets all as specified and directed.

S&F frame work of suspended false ceiling GI exposed suspension system of grid size 605mm x 605 mm with main runner 38 mm x 24 mm, cross tee 29 mm x 24 mm and wall angle 24 mm x 24 mm, using 6 mm thick (high pressuresteam cured) confirming to IS 14862 : 2000 to be placed in a grid of GI system duly suspended with 4 mm dia GI/MS bar hanger fixing with steel dash fastener or iron purlin from the roof with adjustment clip providing position for light fixture complete all as specified and directed.

S&F everest designer boards of size 595x595x5 mm thick fixed on GI snap grid, fixed as in repairs complete all as specified and as directed.

Raking out joints/pointing of cement or cement lime morter not less than 12 mm deep, washing down with water, and removing rubbish off the premises and keeping the surface to be pointed wet for 2 days and material & labour raised pointing to random/polygonal rubble, uncoursed or brought up to courses in cement morter 1:3 all as specified and directed.

JHURI PRASAD AND SONS