GE-KHU-48-2025-26 SPL REPAIRTO BLDG NO T-44 AT HANUTHANG, PROVN OF TOILET BLOCK COMPLETE SET OF SIX AT HANDANBROKE AND PROVN OF TOILET BLOCK SET OF TWO AT GANASOK AND SPL REPAIR TO BLDG NO T-122 AT BATALIK IN THE AOR OF AGE BR-II UNDER GE KHUMBATHANG

Amount

Dismantling wall and ceiling board of insulation boards/ slabs/ blankets any description and thickness in any posn incl cover fillets complete all as specified and directed.

M&L 9 mm thick, prelaminated particle board, interior grade, prelaminated one side with decorative choice laminated and other side balancing white lamination fixed with nails to timber frame work as in ceiling.

M&L 12 mm thick, prelaminated particle board, interior grade, prelaminated one side with decorative choice laminated and other side balancing white lamination fixed with nails to timber frame work as in wall.

Dismantling timber scantling under 40 Sqcm on flats, rails, posts, rafter, purlins etc.in unframed work complete all as specified and directed.

M&L second class soft wood, plain fillets, square or rectangular in section of area exc 13 and n exc 25 Sqcm, clean sawn, secured with nails or brands complete all as specified and directed.

M&L for I class softwood moulding as in cornices, rails etc Sectional area not exc 6 sqcm

M&L second class soft wood, plain fillets, square or rectangular in section of area exc 3 and n exc 6 Sqcm, clean sawn, secured with nails or brands as in lipping complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness including Nanital patterns roof covering. complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick (Square/ rectanglar) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc; set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

Taking down Shutters of any description exc 1 sq. m but n.exc 2 Sqm each complete all as specified and directed

S&F second class soft wood 35 mm thick plain framed panelled shutters (any numbers of panels) with panels of timber flat on both sides (feather edged) or of veneered particles board medium density wood particle board with commercial face veneers,supplied and fitted to chowkats complete all as specified and directed.

Taking down Shutters of any description n exc 1 sq. m each complete all as specified and directed

S&F 30 mm thick second class soft wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

M&L for two coat of synthetic enamel paint (finishing coat) over one coat of pink primer to new wooden surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified and directed.

S&F 100 mm size mild steel butt hinges, medium weight cold rolled (including fixing with nails/screws or welded as required) complete all as specified and directed.

S&F 75 mm size mild steel butt hinges, medium weight cold rolled (including fixing with nails/screws or welded as required) complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality and glazed with oil putty in square n. exc 0.5 Sqm in each pane fixed complete all as specified and directed.

S&F 100 mm aluminium anodised barrel tower bolt of extruded section and fixed.

S&F Aluminium alloy anodised sliding door bolt with hasp staple ( bolt type ) 250mm long , staple (bolt type) and fixing bolt with and sliding bolts of extruded sections or cast-aluminum alloy and fixed.

S&F 150 mm aluminium anodised barrel tower bolt of extruded section and fixed.

S&F for 100 mm size Aluminium handles, cast type, anodised

S&F for 150 mm size Aluminium handles, cast type, anodised

Excavation over area not exceeding 1.5 metre deep and getting out in hard/dense soil, complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundations etc or for shafts, wells cesspits, manholes, pier holes etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in hard/dense soil complete all as specified and directed.

Returning filling in, including spreading leveling, watering and well ramming in layers not exceeding 25cm in soft/loose soil complete all as specified and directed.

Removal of excavated soil to a distance n. exc 50 and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified

M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation etc, complete all as specified & directed

M&L for precast cement concrete block masonry with solid block exc 10 cms in width made with PCC 1:3:6 type C-1 (using 20 mm graded aggregate) and set in CM 1:6 complete all as specified and directed.

M&L 12 mm thick rendering on fair faces of brick work or concrete surface in cm 1:6 to be finished even and smooth without using extra cement complete all as specified and directed.

M&L 15 mm thick cement plaster in CM 1:4 on brick work or concrete surface other than fair face or brick work and finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls including cornices, pillasters etc, and applying two coats of oil emulsion distemper over and including one coat of chalk whiting preparatory to distempering complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls including cornices, pillasters etc, and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L Hard core broken stone boulders of gauge not exceeding 63mm broken stone deposited spearding and levelled in layers not exceeding 15cm thick watered and well rammed to a ture surfaces complete all as specified and directed.

M&L for 75mm thick cement concrete type D-2, 1:4:8 (using 40mm aggregate) in floors complete all as specified and directed

M&L for 75mm thick in PCC 1:3:6 type C-1 as in plinth protection surface finished even and smooth without using extra cement comlete all as specified and directed

M&L Glazed ceramic white colour tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 15 mm thick rendering in CM 1:4 complete all as specified and directed

M&L for white non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match the existing surface laid over 20mm thick avg screed bed in CM 1:6 complete all as specified and directed.

S&F vitreous China Squatting pan 'Orrisa' pattern size 580x440mm white with integral foot rest, and jointing to PVC/CI bend and flush pipe complete including making good to floor complete all as specified & directed.

S&F PVC flushing cistern dual type 10 Litres capacity incl all accessosaries complete all as specified and directed.

S&F 15mm bore Bib Tap Chromium plated fancy type complete all as specified and directed.

S&F 15mm bore size pillar tap cast copper alloy chromium plated fancy type complete all as specified and directed.

S&F 15mm bore Stop Valve (Angle Valve) chromium plated fancy type complete all as specified and directed.

S&F vitereous china wash hand basin, white, flat back of size 550 x 400 mm including brackets, cutting for pinning in ends of brackets or erecting stand and including PVC waste pipe complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair Towel rail 600 mm long D type brass chromium plated with and including chromium plated brass screws and wooden/ plastic cleats etc complete all as specified and directed

S & F Soap dish, vitreous China white, approximate size 160x 160x90mm complete in all respect as specified.

M & L PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete in all respect as specified.

S&F PVC (SWR) pipes single socketed in in any length with rubber ting joints, laid in trencehs or in floors 75mm mm dia complete in all respect as specified.

S & F in repairs rotational moulded polythene, three layers, water storage tank 500 Ltrs capacity, closed top, cylindrical, hoisted and fixed in position complete all as specified and directed .

S&F Second class softwood plain , solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered , put together with glue pinned at joints supplied and fixed complete all as specified and directed.

S&F 25mm outer dia 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc

S&F Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channelor flat sections) includingdistance pieces, cleats etc complete all as specified and directed.

M&L for preparation of newly or previously untreated surfaces of steel or iron work over 10 cms width or girth and applying two coats of synthetic enamal paint over a coat of red oxide Zink chrome primer complete all as spd and as directed.

S & F Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars,stiffeners, gusset plates, etc.

S&F plates (plain or chequered) square cut or notched forming holes, without any attachment complete all as spd and as directed by Engr-in-charge.

S&F Vitreous China wash down pedestal pattern EWC, white water closet pan with intergral trap including seat cover ,making necessary connections to drain and to flushing pipe antisyphonage pipe etc, jointing to PVC/CI and flush pipe including making good to floor complete all as specified and directed.

Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

Exavation over areas in hard dense soil, exceeding 1.5 m and not exceeding 3.00 m deep and getting out complete all as specified & directed .

M&L stone wailing of random rubble, uncorsed well bounded, bedded and solidly hearted built in 1:6 brought to course complete all as specified and directed.

All as above item but laid in dry completed all as specified and directed.

M&L reinforced cement concrete type B1 1:2:4 (using 20 mm graded stone aggregate ) as in slab supported on walls beams and colums in floors, roofs, landing balconies, baffle wall etc complete all as specified and directed.

M&L reinforced precast cement concrete type B1 1:2:4 (Using 20 mm graded stone aggregate) as in cover slabs man hole etc ) and set in cement mortar 1:4 complete all as specified and directed.

M & L form work to sides and soffits of suspended slabs such as roof slabs , landings and similar work not exc 200 mm thick (horizontal or sloopping) for flat fair finished surfaces complete all as specified and directed.

M & L form work to edges of concrete flats, RCC/PCC bands floors roofs and similar works exc 10 cm and not exc 20 cm wide surface finished rough to receive plaster complete all as specified and directed.

Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.

Mild steel TMT 6 mm to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.

M & L PCC type B-0 1:2:4 (12.5 mm graded aggregete) as in floor, drain haunching , benching , coping and etc similar work completed all as specified and directed.

S&F PVC (SWR) pipes single socketed in in any length with rubber ting joints, laid in trencehs or in floors 110 mm dia

S & F PVC (SWR) vent cowl 75 mm dia.

S&F 0.63 mm thick galvanised corrugated mild steel sheeting with two corrugation side lap fixed with L and J type or cranked hook bolt as in roofs, walls etc with grade of zinc coating 275, complete all as specified and directed.

All as per Srl item No.20 above but except sheeting complete all as specified and directed.

M&L for preparing new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for preparing old steel surface and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for 25 mm thick cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in floor or similar works complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n exc 1 sq. each complete all as specified and directed

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 sq. but n exc 4 Sqm each complete all as specified and directed

E/M Portion

Taking down carefully copper/ aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceilling roses, pendants , regulators, sockets light fitting etc for taking credit removing from site and making good disturbed surface etc.

Material and labour for point wiring with 1.5 sqmm cable FRLS PVC insulated, unsheathed copper multistranded conductor, 1100 V grade of size 1.5 sqmm incl 1.5 Sqmm PVC insulated unsheathed FRLS copper conductor as earth wire ( green in clour) and connected to common earthing with PVC heavy duty casing caping/PVC conduit ISI marked as rquired at site along with CI/MS/PVC sunken boxes of size as required at site along with plastic laminated hylom sheet cover 3 mm thick for fixing swiches , sockets regulators incl accessories and making good the disturbed surfaces of wall/ ceiling etc for the following : -

One light point/ one fan point/ Bell Point controlled by one switch

One 3 pin socket outlet, 5 Amp independent

One 3 in socket outlet 5 Amps on same board

Supply and fix switch piano flush type 5 Amps all as specified and directed .

Supply and fix socket 5 amp flush type complete all as specified and directed .

S & Fix Ceiling rose 3 terminal flush type 6 Amps,250 volts AC ISI marked

S&F modular batten holder 230 volt all as specified and directed .

All as per item No 2 above but for point wiring for power point with 2.5 Sqmm FRLS PVC insulated unsheathed copper cable 1100 Volt grade drawn through and including PVC casing caping heavy duty ISI marked /heavy duty conduit ISI marked as required at site alongwith with modular cover plate and cover frame of suitable size as required at site incl all accessories accessories with 2.5 Sq mm FRLS PVC insulated unsheathed copper conductor cable as earth wire ( green in colour ) and connected to common earth all as specified.

S & F socket 5 pin 16 /6 Amp flush type complete all as specified and directed.

S & F switch 15/16 Amps complete all as specified and directed.

S&F decorative ultra slim polycarbonate LED 4 feet long 20/22 watts with THD less than 15% very high efficiency suited for T-8 tube luminare with system efficacy 110 lumen per wattsb , high quality poly carbonate end cap in white finish and snap fitted to the housing, inbuilt driver incl copper connecting wire three core of suitable size upto connctor of ceiling rose complete all as specified and directed. .

S&F wall mounted 10 watts LED batten 2 feet long comprising extruded aluminium heat shrink provided for efficient heat dissipation and integrated lectronic driver with aluminium housing , system efficiency of 110 lumen per watts and lumen package >= 1100 lumen , THD< 10 % incl copper connecting wire three core of suitable size upto connctor of ceiling rosecomplete all as specified and directed.

S&F LED building security light fitting 30 watts made of pressure diecast aluminium housing with acrylic cover as diffuser with IP65 and IK -07 protection , THD<10%, lumen output >= 110 lumen per watts with integrated lectronic driver incl copper connecting wire three core of suitable size upto connctor of ceiling rose complete incl GI mounting pipe of building security lights of size 32 mm to 40 mm size upto 1.2 mtr length bend into sizes incl mounting clamps made of MS flat saddles, nut bolt and washers all as specified and directed .all as specified and directed.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Taking down old u/s submain wiring of any sizes complete incl conduits/PVC casing n caping all as specified & directed.

M&L for sub main wiring with two run of single core PVC insulated copper cable FRLS multi-stranded conductor 6 Sqmm drawn through in and including Non metalic PVC heavy duty PVC casing caping of suitable size as required at site with all accessories with one run of 6 Sqmm PVC insulated unsheathed copper conductor FRLS as earth wire ( green in colour ) , connected to common earth complete all as specified and directed. Note : 1. Two run of main copper conductor 6 sqmm size , one run of 6 sqmm earth wire and one run of PVC conduit/PVC casing n caping shall be measured as one unit length . 2. Proper colour coding shall be maintained as per IS code.

S&F distribution board double door made out of sheet metal enclosure (CRCA sheet) dust and vermin proof SPN 12 way with 200 Amps rated copper bus bar neutral bar, earth bar IP 43 protection, single pole and neutral 250 volts, flush to wall / fixed on surface incl making good of surface complete all as specified and directed incl taking down old one

S&F MCB SPN 40 to 63 Amps,10 KA, 240 volt C curve IP 20 complete all as specified and directed incl taking down old one

S&F MCB single pole, 6 to 32 Amp 240 volt C curve 10 KA breaking capaity complete all as specified and directed incl taking down old one

S&F 1100 volts grade heavy duty cable PVC insulated aluminium conductor ,served with inner sheathing of PVC tape and overall PVC sheathed in service connections two core of size 16 sq mm flat or circular complete all as specified and directed

M&L for earthing complete with galvanized steel earth plate electrode60cmX60cmX6mm thick buried directly in ground (earth plate not less than 2.25 mtr deep below the normal ground level) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth lead wire of 4.0 mm dia by means of nuts bolts, washers, check nuts of iron or steel including PCC pits and RCC cover in PCC 1:2:4 (type B-1) and necessary earth work in any type of soil medium grade GI watering pipe 20 mm dia with funnel and wire mesh and 15mm bore GI pipe light grade protection pipe upto test point etc including excavation and charcoal, common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I. all specified and directed.

Description all as per serial item No 01 here-in-before but one 5 pin socket outlet, 6 amps, independent complete all as specified and directed.

S&F switch piano, flush type single pole one way 6 Amp, 240 volts ISI marked complete all as specified and as directed.

S&F socket outlet 2 in 1, 3 pin, 6 A ISI marked complete all as specified and directed.

S&F angle lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Supply and Fixing LED bulb of 15 watt complete all as specified and directed.Make -Bajaj or Equivalent Cat Part- IVORA PLUS HB LED LAMP 15W CDL B22

Supply & fixing surface /wall mounted light fitting pre wired suitable for single T8 LED tube along with supply and fixing one number LED tube in polycarbonate housing of nominal wattage - 20 Watt, Lumen out put - 2100 Lm, Colour Temp - 6500 Kelvin, Size & Length - G13/ T8/ 4 Feet with integral/in built driver, having short circuit and surge protection including making connection with two core PVC insulated, sheathed copper conductor cable of size 23/0.0076 complete all as specified and directed.

M&L distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 4 way 240 volts double door complete all as specified and directed.Note:- Distribution board and MCB's should be same make.

Supply and fix 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fix of SPN 40 to 63 Amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm complete all as specified and directed.

Material and labour for Earthing complete with galvanised iron earth plate electrode of size 600 x 600 x 6 mm buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including GI earthing wire of size 4 mm dia by means of GI bolts/nuts/washers and protected by 15 mm bore GI light grade pipe upto test point or upto main switch board fixing with 02 Nos nuts and bolts and protection pipe fixed with and including flat iron clamps, bolts, nuts and washers. Earth plate shall be surrounded by alternate packed layer 15 cm thick of charcoal or coke and common salt all around bottom and top. 20 mm bore GI medium grade pipe for watering and including funnel, wire mesh, PCC chamber pit made with PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) including necessary form work, excavation and earth work in any type of soil, returning filling and disposal of surplus soil to a distance not exceeding 50m, Pit cover 40mm thick made with RCC (1:2:4) type B1 (using 20 mm graded stone aggregate) including TMT reinforcement 8mm dia @ 75mm c/c both way, MS handle 12mm dia, cover rest on MS angle iron frame 40x40x6mm embeded in concrete duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified & shown in electrical plate No. 3 of SSR 2009 (Part-I) complete all as specified and as directed by Engineer-in-charge. Note:- (i) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (ii) Protection pipe and GI earthing wire upto test point or upto electric equipment from top of earth plate shall be included in the unit rate of this item. (iii) The earth testing arrangement should be done by the contractor as per direction of Engineer-in-charge.

Description all as per serial item No 01 here-in-before but for one 5 pin socket outlet 16 Amps on Independent board with cables 2.5 sqmm size complete all as specified and directed.

S&F socket outlet 3 pin, 6/16 Amp, flush type, 240 Volts, 6 pin flush type complete ISI marked complete all as specified and directed.

S&F switch piano, flush type single pole, one way 16 Amps, 240 volts ISI marked complete all as specified and directed.

M&L distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 12 way 240 volts double door complete all as specified and directed.Note:- Distribution board and MCB's should be same make.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.0 sq mm 2 core

Supply and fix in repair Modular switch piano flush type 5 Amps one module all as specified

Supply and fix in repair Modular socket 5 amp 02 module all as specified

S & F in repair modular socket 5 pin 16 amp 02 module complete all as specified and directed.

S & F in repair modular switch 15/16 Amps 02 module complete all as specified and directed.

S&F in replacing GI mounting pipe of building security lights of size 32 mm to 40 mm size upto 1.2 mtr length bend into sizes incl mounting clamps made of MS flat saddles, nut bolt and washers all as specified and directed .

M&L for sub main wiring with two run of single core PVC insulated copper cable FRLS multi-stranded conductor 4 Sqmm drawn through in and including Non metalic PVC heavy duty PVC casing caping of suitable size as required at site with all accessories with one run of 4 Sqmm PVC insulated unsheathed copper conductor FRLS as earth wire ( green in colour ) , connected to common earth complete all as specified and directed. Note : 1. Two run of main copper conductor 4 sqmm size , one run of 4 sqmm earth wire and one run of PVC conduit/PVC casing n caping shall be measured as one unit length . 2. Proper colour coding shall be maintained as per IS code.

M&L for sub main wiring with two run of single core PVC insulated copper cable FRLS multi-stranded conductor 1.5 Sqmm drawn through in and including Non metalic PVC heavy duty PVC casing caping of suitable size as required at site with all accessories with one run of 1.5 Sqmm PVC insulated unsheathed copper conductor FRLS as earth wire ( green in colour ) , connected to common earth complete all as specified and directed. Note : 1. Two run of main copper conductor 1.5 sqmm size , one run of 1.5 sqmm earth wire and one run of PVC conduit/PVC casing n caping shall be measured as one unit length . 2. Proper colour coding shall be maintained as per IS code.

S&F in replace distribution board double door made out of sheet metal enclosure (CRCA sheet) dust and vermin proof SPN 8 way with 200 Amps rated copper bus bar neutral bar, earth bar IP 43 protection, single pole and neutral 250 volts, flush to wall / fixed on surface complete incl making good all as specified and directed.

S&F in replacing distribution board double door made out of sheet metal enclosure (CRCA sheet) dust and vermin proof SPN 2 way with 200 Amps rated copper bus bar neutral bar, earth bar IP 43 protection, single pole and neutral 250 volts, flush to wall / fixed on surface complete all as specified and directed incl taking down old one

S&F in repair MCB SPN 63 Amps,10 KA, 240 volt C curve IP 20 complete all as specified and directed incl taking down old one

S&F in repair MCB SPN 20 Amps,10 KA, 240 volt C curve IP 20 complete all as specified and directed incl taking down old one

S&F in replacing PVC air freshner 250 mm size , 230V, 50 Hz , 900 RPM complete with louver incl copper connecting wire from ceiling rose to connector of fan all as specified and directed.

Deduct Credit for Demolished/Dismantled material Rs (-) 42,265.40 (Minus) as listed in Schedule 'A' Sec-II (Credit Schedule) Note : Tenderers will not quote against this item being a tentative amount, to be considered to arrive at the 'Contract Sum'.

M/S M A ENTERPRISES (BID ID -3346181)

M/S MOHD FAROOQ (BID ID -3350635)

M/S SUN RISE BUILDERS (BID ID -3349579)

M/S SK TRADERS (BID ID -3349546)

M/S ABBAS ENTERPRISES (BID ID -3350266)