Construction of 2No. Type-III Quarters for the staff of Assistant Distt. Attorney at Dehra District Kangra HP

Amount

Excavation in foundation trenches etcetra in earth work in all kinds of classification of soil such as pick work, jumper work, pick jumper work, blasting work, soft and hard blasting and doing work in saturated soil, including chiseling or wedging out rock where blasting is prohibited, or any other mixed variety of soil including shoring, strutting, de-watering and pumping or bailing out water (surface and sub soil water) upto any depth or any quantum of water including slush which may arise during dewatering, removal of slush and stacking the excavated soil clear from the edge of excavation with in all leads, as directed by Engineer-in-Charge and then returning the stacked soil in 15cm (fifteen centimeters) layers when required into plinths, sides of foundations etc. consolidating each deposited layer by ramming watering and then disposing of all surplus excavated earth as directed by Engineer-in-Charge with in all leads and lifts, disposed earth to be levelled and neatly dressed including carriage of materials within all leads and lifts.

Excavation in drains and channels etcetera in earth work in all kinds of classification of soil such as pick work, jumper work, blasting work, pick jumper blasting work, hard blasting work including chiseling or wedging out rock where blasting is prohibited and doing work in saturated soil including cost of shoring, strutting and pumping or bailing out water (surface and sub soil water) upto any depth and any quantum of water including clearing of slush which may arise out during dewatering including dressing of sides and bed and disposing of all excavated earth up to any leads and lifts, disposed earth to be levelled and neatly dressed as per directions of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.

Filling in plinth with sand under floors including watering, ramming consolidating and dressing complete as per HPPWD specification or as directed by Engineer-in-Charge, including carriage of materials with in all leads, lifts and other incidental. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights. below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in foundation footings, basis of columns etcetera and mass concrete, and as directed by the Engineer-in-Charge including carriage of materials. Within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering, strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Columns, pillars, posts and struts, (square, rectangular or polygonal in plan), up to all floor level, and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering, strutting and propping etc, with wooden battens and ballies, heights of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors, roofs, landings, shelves, and the like floor, etc. up to any thickness, up to all floor level and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering, strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers, girders and lintels, sides and soffits of beams, beam haunchings, cantilevers girders, bressumers and lintels upto any depth/heights, up to all floor level and as directed by the Engineer-in-Charge including carriage materials of within all leads, lifts and other incidentals.

Providing form work with steel plates 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering, strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in stairs cases with slopping or stepped soffits, excluding, landing, up to all floor level and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering, strutting and propping etc, with wooden battens and ballies, heights of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls upto any width, up to all floor level and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.

Providing form work with steel plates 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering, strutting and propping etc, with wooden battens and ballies, heights of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Vertical surfaces such as walls (any thickness) partition and the like including attached pillasters, buttresses, plinth and string courses and the like, up to all floor level, complete as per HPPWD specification or as directed by Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:6:12 (one cement isto six sand isto twelve graded crushed stone aggregate 40mm (forty millimeter) nominal size) and curing complete, excluding the cost of form work in foundation and plinth/under floors in all depths/heights including pumping or bailing out water/dewatering and removal of slush which may arise at the time of laying under water complete as per HPPWD specifications or as directed by the Engineer-in-Charge and carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:5:10 (one cement isto five sand isto ten graded crushed stone aggregate 40mm (forty millimeter) nominal size) and curing complete, in or under water, including pumping or bailing out water/dewatering, removal of slush which may arise at the time of laying under water complete excluding the cost of form work in foundation and plinth in all depths/heights as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts. The rate inclusive of Malkhana, royality, octroi, toll tax or any taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:5:10 (one cement isto five sand isto ten graded crushed stone aggregate 40mm (forty millimeter) nominal size) in hunching of S.W stoneware/PVC pipes 150mm (one hundred fifty millimeter) internal diameters, including concrete for beddings necessary form work and curing complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts. The rate inclusive of Malkhana, royality, octroi, toll tax or any taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:4:8 (one cement isto four sand isto eight graded crushed stone aggregate 40mm (forty millimeter) nominal size) and curing complete, in or under water, including pumping or bailing out water/dewatering, removal of slush which may arise at the time of laying under water complete excluding the cost of form work in foundation and plinth in all depths/heights as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts. The rate inclusive of Malkhana, royality, octroi, toll tax or any taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced concrete work Grade M-20 (Twenty) mix design to obtain the minimum compressive strength of 20 N/mm² (twenty newton per square millimetre) with cement contents not less than 320 kg (three hundred twenty Killograme) per cubic meter and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in foundation footings, bases of columns etcetera and the like and mass concrete complete as per HPPWD specification and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced concrete work Grade M-20 (M-Twenty) mix design to obtain the minimum compressive strength of 20 N/mm² (twenty newton per square millimetre) with cement contents not less than 320kg (three hundred twenty killogramme) per cubic meter and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in columns, pillars, posts and struts in all depths/thickness and upto all floor level, and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, octroi, toll tax or any taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced concrete work Grade M-20 (Twenty) mix design to obtain the minimum compressive strength of 20 N/mm² (twenty newton per square millimetre) with cement contents not less than 320 Kg (three hundred twenty killogramme) per cubic meter and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves and their supports, balconies, beams, lintals, girders, bressumers cantilevers etcetera in all depths/thickness upto all floor level complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government

Providing and laying mechanically mixed and vibrated reinforced concrete work Grade M-20 (M-Twenty) mix design to obtain the minimum compressive strength of 20 N/mm² (twenty newton per square millimetre) with cement contents not less than 320kg (three hundred twenty killogramme) per cubic meter and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in stair cases (except spiral stair cases) excluding landing but including preparing of top surface and finishing of nosing up to all floor level complete as per HPPWD specifications and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, octroi, toll tax or any taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete, grade M-20 (M-twenty) mix design, to obtain the minimum compressive strength of 20N/mm² (Twenty newton per square millimetre) with cement contents not less than 320Kg (three hundred twenty kilogrammes) per cubic meter including curing complete, excluding the cost of form work and reinforcement for reinforced cement concrete work in walls (any thickness) but not less than 0.10mtr (zero point one zero metre) including attached pilasters, buttresses, plinth and string courses etcetera and the like from top of foundation up to all floor level, and curing complete as per HPPWD specification and as directed by Engineer-in Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, octroi, toll tax or any taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced concrete work Grade M-20 (Twenty) mix design to obtain the minimum comppressive strength of 20 N/mm² (twenty newton per square millimeter) with minimum cement contents of 320kg (three hundred twenty Killogramme) per cubic meter in reinforced concrete Chajjas of any thickness and upto all floor level, including finishing the exposed surfaces with cement mortar 1:3 (one cement isto three sand) to give a smooth and even surface, including centering/form work and curing complete, excluding the cost of reinforcement complete, as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Providing and laying mild/Tor steel reinforcement for Reinforced Cement Concrete work including bending, binding, straightening and placing in position complete including cost of binding wire and other incidentals due for its completion up to all floor level complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and laying damp proof course 100mm (One hundred millimeters) thick with cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 12.5mm (twelve decimal five millimeter) nominal size) and curing complete including cost of form work as required at site or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Applying a coat of hot bitumen (mexphalt 80/100 (eighty/hundred) or equivalent) using 1.70 Kgs. (one decimal seven zero kilogramme) per square meter on damp proof course after cleaning the surface with a piece of cloth lightly soaked in kerosene oil complete including carriage of materials within all leads, lifts and other incidental and as per the direction of Engineer-in-Charge. The rate inclusive of Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Brick work using Second class common burnt clay buildings bricks in super-structure above plinth level upto all floor level in cement mortar 1:6 (one cement isto six sand) and curing complete including carriage of materials within all leads, lifts and other incidental, and as per directions of Engineer-in-Charge. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Second class half brick work using common burnt clay building bricks in super structure above plinth level upto all heights/floor level in cement mortar 1:4 (one cement isto four sand) shall be provided with hoop iron and curing complete including carriage of materials within all leads, lifts and other incidental, or as directed by the Engineer-in-Charge. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing in reinforced cement concrete work smooth finishing of the exposed surfaces with cement mortar 1:3 (one cement isto three sand) upto all floor level complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.

Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth upto all heights/depths including pumping or bailing out water/ dewatering including racking out joints in cement mortar 1:6 (one cement isto six sand) complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing ISI marked, 12mm (twelve millimeter) thick pre laminated board both side bwp phenol bonded of Kitply/Action Tesa/Century or its equivalent exterior/interior grade panelled shutters with 40mm (forty millimeter) thick frame of first class Deodar Wood for Doors including bright finished/ black enamelled iron butt hinges with necessary screws etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate including Octroi, Toll Tax, Sale Tax or any other taxes imposed by the Government.

Providing and fixing 40mm (forty millimeter) thick second class Deodar Wood wire gauze shutters using galvanized MS wire gauze of IS gauge designation 85-G (eighty five-G) with wire of diametre 0.56mm (zero point five six millimeters) for doors, windows and clearstory windows including bright finished black enamelled iron butt hinges, with necessary screws etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, royality, octroi, toll tax or any taxes imposed by the Government

Providing and fixing 19mm (Nineteen millimeter) thick water proof and anti termite commercial board ISI marked make of century ply or its equivalent shutters for cup boards, with 6mm (six millimnetre) thick hard wood edging all round including fixing with nickel plated piano hinges and screws etcetera complete as per HPPWD specifications or as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of octroi, toll tax or any taxes imposed by the Government

Providing and fixing 19mm (nineteen millimeter) thick water proof anti termite commercial board ISI marked make of century ply or its equivalent in shelves/ box for cup board with butt joints and fixing with nails and screws etcetera complete as per drawing and design as per HPPWD specifications or as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, toll tax or any taxes imposed by the Government

Providing and fixing 12mm (Twelve millimeters) thick and 150mm (one hundred fifty millimeters) wide pelmet with 25mm (twenty five millimeters) diametre aluminium curtain rods and brackets including fixing with 25x3mm (twenty five into three millimeters) M.S. flat 10cm (ten centimeters) long and plugs and necessary screws etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, royality, octroi, toll tax or any taxes imposed by the Government.

Providing and fixing plain M.S. grills of required patterns in wooden/steel frames of window etc. with M.S. flat, square or round bars, bolts and nuts or screws including welding with frame complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including of Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing angle iron SDB/Cup board frame manufactured from M.S. angle iron section 25mmx25mmx 5mm ( twenty five millimeter into twenty five millimeter into five millimeters) thickness including hinges- jambs, lock jamb , beed and if required angle thrashold of mild steel angle 25mm x 25mm( twenty five millimeter into twenty five millimeters) welded or rigidly fixed by mechanical means, lugs with split end tails to each jamb including steel butt hinges 2.5mm ( two decimal five millimeters) thick with a provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-Charge including carriage of materials within all leads , lifts and other incidental.

Providing and fixing aluminium sliding door bolts, make of PILOT/Sheel or equivalent anodized transparent or dyed to required colour and shade with necessary bolts, nuts and screws etcetera complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of octroi, toll tax or any taxes imposed by the Government. 300x16mm (three hundred into sixteen millimeters).

Providing and fixing 250x16mm (two hundred fifty into sixteen millimeters) aluminium sliding door bolts, make of PILOT/Sheel or equivalent, anodized transparent or dyed to required colour and shade with necessary bolts, nuts and screws etcetera complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of octroi, toll tax or any taxes imposed by the Government.

Providing and fixing 200x10mm (two hundred into ten millimeters) aluminium tower bolts (Barrel type) make of pilot/sheel or equivalent anodized transparent or dyed to required colour and shade with screws etc. complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of octroi, toll tax or any taxes imposed by the Government.

Providing and fixing 150x10mm (one hundred fifty into ten millimeter) aluminium tower bolts (Barrel type) make of pilot/sheel or equivalent anodized transparent or dyed to required colour and shade with screws etc. complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of octroi, toll tax or any taxes imposed by the Government.

Providing and fixing 125mm (one hundred twenty five millimeters) aluminium handles make of pilot/sheel or equivalent anodized transparent or dyed to required colour and shade with necessary screws etc. complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, toll tax or any other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimeters) aluminium handles make of pilot/sheel or equivalent anodized transparent or dyed to required colour and shade with necessary screws etc. complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, toll tax or any other taxes imposed by the Government.

Providing and fixing 150x10mm (one hundred fifty into ten millimeter) M S tower bolts (Barrel type) make of pilot/sheet or equivalent with necessary screws etcetera complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of octroi, toll tax or any taxes imposed by the Government.

Providing and fixing 100x10mm (one hundred into ten millimeter) M S tower bolts (Barrel type) make of pilot/sheet or equivalent with necessary screws etcetera complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of octroi, toll tax or any taxes imposed by the Government.

Providing and fixing 150mm (one hundred fifty millimeters) oxidized M.S. single acting spring hinges with necessary screws etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, toll tax or any taxes imposed by the Government.

Providing and fixing 200mm (two hundred millimeters) size oxidized mild steel hooks and eyes complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, toll tax or any taxes imposed by the Government.

Providing and laying upto all floor level 20mm (twenty millimeter) thick hydraulically compressed and polished precast terrazzo tiles of 300x300mm (three hundred into three hundred millimeter) size of NTC or its equivalent ISI marked No.IS 1237 with marble chips of white, green, yellow and maroon shade of size O,B, 2B sizes laid in floors, treads of steps and landing on a bed of 25mm (twenty five millimetre) average thickness of cement mortar 1:6 (one cement isto six sand) and jointed with white/grey cement slurry mixed with pigment to match the shade of tiles (wherever required) including rubbing and polishing complete with the tiles of silver grey shade upto all floor level complete as per HPPWD specifications and as per direction by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, toll tax or any other taxes imposed by the Government.

Providing and laying upto all floor level White glazed tiles of size 300x450mm (three hundred into four hundred fifty millimeters) and 6mm (six millimeters) thick of approved brand and make (Kajaria/Swastik/Somany tiles or equivalent) in skirting, risers of steps and dado for all heights on12mm (twelve millimeters) thick cement plaster 1:3 (one cement is to three sand) and jointed with white cement slurry complete as per HPPWD specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, toll tax or any taxes imposed by the Government.

Providing and laying upto all floor level 25mm (twenty five millimeter) thick hydraulically compressed and polished precast terrazzo tiles of 300x300mm (three hundred into three hundred millimeter) size of NTC or its equivalent ISI marked No. 1S-1237 with marble chips of white, green, yellow and maroon shade of size O,B,2B sizes in skirting risers of steps and dodo upto any height on 10mm (Ten millimeter) thick cement plaster 1:3 (one cement: three sand) jointed with white/grey cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing complete with tiles of silver grey shade complete as per HPPWD specifications and as per direction by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, toll tax or any other taxes imposed by the Government.

Providing and laying 20mm (twenty millimeters) thick white makrana marble work (table rubbed and polished) in floring laid over 20mm (twenty millimeters) thick base in cement mortar 1:3 (one cement is to three sand) including jointing with cement mortar 1:2 (one cement is to two marble dust) with an admixture of pigment to match the shade of marble complete upto all floor level, as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts, and other incidental. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing on wall face 150mm (one hundred fifty millimeter) diameter P.V.C (polyvinyl chloride) (D-Plast) or its equivalent pipe confirming to IS code No.-13592 for rain water pipe of working pressure not less than 4.5kg (four point five kilogramme) per square meter including filling the joints with adhesive of approved make complete as per HPPWD specifications and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing on wall faces PVC (D-Plast) or its equivalent accessories confirming to IS code No.-14735 for rain water pipes including filling the joints with approved adhesives complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government. P.V.C Plain bend 100mm (one hundred fifty millimeter) nominal diameter.

Providing and fixing on wall faces PVC (D-Plast) or its equivalent accessories confirming to IS code No.-14735 for rain water pipes including filling the joints with approved adhesives complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government. PVC plain shoes 150mm (one hundred fifty millimeters) diameter.

Providing and fixing 150 mm (one hundred fifty millimeter) diameter, mild steel Holder Bat clamps of approved design to CI or SCI/P.V.C pipes embedded in and including cement concrete blocks 10x10x10cm (ten into ten into ten centimeter) of 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (Twenty millimeter) nominal size) mix including cost of cutting holes and making good the walls complete as per HPPWD specifications and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing angle iron doors frames (Single rebate) manufactured from M.S. angle iron section of 40x40x5mm (forty into forty into five millimeters) thickness and M.S flat 50x5mm (Fifty into five millimeter) in combination welded together to make one frame as per design and drawing including hinges, jamb, lock jamb, beed and if required angles thrashold of mild steel angle 50x25mm (fifty into twenty five millimeter) welded or rigidly fixed by mechanically means, lugs with split end tails to each jamb including steel butt hinges 2.5mm (two point five millimeters) thick with a provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pretreatment of the surface complete as per HPPWD Specification or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate including of Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing angle iron doors frames (double rebate) manufactured from M.S. angle iron section of 40x40x5mm (forty into forty into five millimeters) thickness and M.S flat 50x5mm (Fifty into five millimeter) and M.S flat 25x5mm (Twenty five into five millimeter) in combination welded together to make one frame as per design and drawing including hinges, jamb, lock jamb, beed and if required angles thrashold of mild steel angle 50x25mm (fifty into twenty five millimeter) welded or rigidly fixed by mechanically means, lugs with split end tails to each jamb including steel butt hinges 2.5mm (two point five millimeters) thick with a provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pretreatment of the surface complete as per HPPWD Specification or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate including of Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing doors windows and ventilators frames manufactured from MS channel section ISLC-75 (seventy five) mild steel channel section 75x40x4mm (seventy five into forty into four millimeters) flapped with mild steel flat 75x4mm (seventy five into four millimeter) in combination welded together to make one frame as per design and drawing including hinges- jambs, lock jamb , beed and if required angle thrashold of mild steel angle 50mmx25mm ( fifty millimeter into twenty five millimeters) welded or rigidly fixed by mechanical means, lugs with split end tails to each jamb including steel butt hinges 2.5mm (two decimal five millimeters) thick with a provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-Charge including carriage of materials within all leads , lifts and other incidental.

Providing and fixing steel glazed doors, windows and ventilators of various type categorized below, fabricated of standard rolled steel sections joints, mitred, and welded with 16x3.15mm ( sixteen into three decimal one five millimeters) lugs 10cm (ten centimeters) long embedded in cement concrete block 15x10x10cm (fifteen into ten into ten centimeters) size of 1:3:6 (one cement isto three sand isto six graded stone aggregate 20mm (twenty millimeter) nominal size or with wooden/ steel plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required and iron fitting such as handles, tower bolts etc. including providing and fixing of glass panes 4mm (four millimeter) thick with glazing clips and special metal sash putty of approved make complete including applying priming coat of red lead paints or as directed by Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. (Fixed steel windows).

Providing and fixing steel glazed doors, windows and ventilators of various type categorized below, fabricated of standard rolled steel sections joints, mitred, and welded with 16x3.15mm ( sixteen into three decimal one five millimeters) lugs 10cm (ten centimeters) long embedded in cement concrete block 15x10x10cm (fifteen into ten into ten centimeters) size of 1:3:6 (one cement isto three sand isto six graded stone aggregate 20mm (twenty millimeter) nominal size or with wooden/ steel plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required and iron fitting such as handles, tower bolts etc. including providing and fixing of glass panes 4mm (four millimeter) thick with glazing clips and special metal sash putty of approved make complete including applying priming coat of red lead paints and carriage of materials within all leads, lifts and other incidental. (Top hung ventilator).

Providing and fixing factory made double steel shutters window side hung (one glazed and other side gauzed) including frame of channel ISLC-75 (Seventy five) flapped with MS flat 75x4mm(Seventy five into four millimeter) and 50x4mm (fifty into four millimeter) with opening side of channel to make multi frame and shutter of rolled steel Z-section, T-section and T-hinges, handles with closing device and making provision of fixing of windows where required with 16x3.15mm (sixteen into three point one five millimeter) lugs 10cm (ten centimeter) long, embedded in cement concrete blocks 15x10x10cm (fifteen into ten into ten centimeter) of cement concrete 1:3:6 (one cement isto three sand isto six graded crushed stone aggregate 20mm (Twenty millimeter) nominal size or with wooden/steel plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required and iron fittings, including providing and fixing of handles and hasps and staples etcetera and fixing 4mm (four millimeter) thick glass panes with glazing clips and special metal sash putty of approved make for glazed side of shutter and wire gauge of IS gauge designation 85-G (eighty five –G) with wire of diametre 0.56mm (zero point five six millimeter) and for fixing wire mesh with M.S flat 20x3mm (Twenty into three millimeter) for metal beading complete for wire gauge shutter including applying a priming coat of red lead paint as per drawing and design or as per the direction of Engineer-in-Charge Including carriage of materials with in all leads lifts. The rate including of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing M.S. fan clamps type-1 of 16mm (sixteen millimeters) dia M.S. bars bent to shape with hooked ends in RCC slab during laying including painting the exposed portion of loop, all as per standard design complete upto all floor level as per HPPWD Specification or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, toll tax or any taxes imposed by the Government.

6mm (six millimeter) thick cement plaster to ceiling with cement mortar 1:3 (one cement isto three sand), up to all floor level complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and applying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:6 (one cement isto six sand) in single coat on rough side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth complete as per HPPWD specifications or as per the direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and applying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:6 (one cement isto six sand) in single coat on fair side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth complete as per HPPWD specifications or as per the direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and applying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:5 (one cement isto five sand) in single coat on fair side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth complete as per HPPWD specifications or as per the direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Painting two or more coats (excluding priming coats) on new steel and other metal surfaces under coat with ready mixed paint other than white of approved brand and manufacture (Narolac/Asian paints) or its equivalent and of approved shade to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter complete upto all floor level as per HPPWD specifications or as direction by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning, oil, grease, dirt and other foreign matter sand papering and knotting with ready mixed paint brushing wood primer pink of approved brand and manufacture (Narolac/Asian paints) or its equivalent ) complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Painting two or more coats (excluding priming coat) on new wood and wood based surfaces with enamel paint other than white of approved brand and manufacture (Narolac/Asian paints) or its equivalent ) and of approved shade to give an even shade including cleaning the surface of all dirt, dust and other foreign matter complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

White washing with lime on undecorated wall surface (two or more coats) to give an even shade including thoroughly brooming the surface to remove all dirt, dust mortar drops and other foreign matter including preparing the surface even and sand papered smooth and carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government

White washing with lime on undecorated ceiling and/or sloping roofs (two or more coats) to give an even shade including thoroughly brooming the surface to remove all dirt, dust mortar drops and other foreign matter including preparing the surface even and sand papered smooth and carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government

Distempering (two or more coats) with dry distemper of approved brand and manufacture (Nerolac/Asian or equivalent make) and of required shade on un-decorated wall surfaces to give an even shade over and including primer coat of whiting of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter including preparing the surface even and sand papered smooth and carriage of materials within all leads, lifts and other incidental. The rate including Sales tax, Toll tax or any other taxes imposed by the Government

Finishing wall with water proofing cement paint of approved brand and manufacture (Nerolac Surksha/Apex exterior) or its equivalent and of approved shade on undecorated wall surfaces (two or more coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, other foreign matter and sand papered smooth including applying of putty as required for making the surface smooth complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and laying under layer for plinth protection of 75mm (Seventy five millimeters) thick (unconsolidated) bed of dry brick/stone aggregate 40mm (Forty millimeters) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and laying plinth protection 50mm (fifty millimeters) thick cement concrete 1:3:6 (one cement isto three sand isto six graded crushed stone aggregate 20mm (twenty millimeters) nominal size including finishing the top surfaces of concrete smooth as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Constructing 15x22cm ( fifteen into twenty two centimeter) ‘U’ shape open surface drain with square rubble hammer dressed stone masonry wall in cement mortar 1:6 ( one cement isto six sand) and inside platering with cement mortar 1:3 ( one cement isto three sand) including earth work and laying 10cm (ten centimeters) cement concrete bed in 1:5:10 ( one cement isto five sand isto ten graded crushed stone aggregate 40mm (forty millimeters) nominal size) and 7.5 cm ( seven decimal five centimeters) cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm ( twenty millimeters) nominal size) at bottom joint of drain and finished with a floating coat of neat cement complete as per standard design including carriage of materials within all leads, lifts of materials and other incidental.

Providing and fixing railing for stair case having baluster of 19mmx19mm (Nineteen millimeter into nineteen millimeter) M.S solid square bar with a clear height of 85cm (Eighty five centimater) at 60cm (Sixty centimater) centre to centre embedded in cement concrete steps and welded with electric welding at top along with handrail of hollow rectangular pipe of-14 to 16 gauge. Vertical balluster welded/jointed with each other with M.S flat 50x5mm (fifty into five millimeter) complete upto all floor level as per drawing and design including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in-Charge.

Providing and fixing to wall, ceiling and floor ploythelene aluminium ploythelene (PE.AL.PE) composite pressure pipe U.V stabilized with carbon black and fitting of kitec or its equivalent confirming to ISI 15450-2004 for water supply complete with necessary pipe fitting including cutting, fixing and making good the walls, ceiling and floor complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax, Sales tax or any other taxes imposed by the Government. 1216 (16mm (Sixteen millimeter) outer diameters pipe)

Providing and fixing to wall, ceiling and floor ploythelene aluminium ploythelene (PE.AL.PE) composite pressure pipe U.V stabilized with carbon black and fitting of kitec or its equivalent confirming to ISI 15450-2004 for water supply complete with necessary pipe fitting including cutting, fixing and making good the walls, ceiling and floor complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax, Sales tax or any other taxes imposed by the Government. 1620 (20mm (Twenty millimeter) outer diameters pipe)

Providing and laying in trenches ISI marked galvanized mild steel tubes (medium grade) tube fittings of approved brand and manufacture (TATA/JINDAL or its equivalent make) complete as per HPPWD specifications. (Earth work in trenches to be measured and paid for separately) including carriage of materials within all leads, lifts and other incidentals. The rate including Octroi, Sales tax, Toll tax or any other taxes imposed by the Government. (20mm (twenty millimeters) nominal bore/ diameters)

Providing and laying in trenches ISI marked galvanized mild steel tubes (medium grade) tube fittings of approved brand and manufacture (TATA/JINDAL or its equivalent make) complete as per HPPWD specifications. (Earth work in trenches to be measured and paid for separately) including carriage of materials within all leads, lifts and other incidentals. The rate including Octroi, Sales tax, Toll tax or any other taxes imposed by the Government. (25mm (twenty five millimeters) nominal bore/ diameters)

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (medium grade) tube fittings to approved brand and manufacture (TATA/JINDAL make) or its equivalent including making good wall, ceiling and floor complete including carriage of materials within all leads, lifts and other incidentals. The rate including Octroi, Sales tax, Toll tax or any other taxes imposed by the Government. (20mm (twenty illimeters) nominal bore/ diameters)

Providing and fixing 150mm (One hundred fifty millimetre) nominal diametre size pipe cast iron Holder bats of approved design to CI or SCI /PVC pipes embedded in and including cement concrete blocks 10x10x10cm (ten into ten into ten centimeter) of 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty millimeter) nominal size) mix including cost of cutting holes and making good the walls complete as per HPPWD specifications and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millimetre) nominal diametre /size pipe cast iron Holder bats of approved design to CI or SCI /PVC pipes embedded in and including cement concrete blocks 10x10x10cm (ten into ten into ten centimeter) of 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty millimeter) nominal size) mix including cost of cutting holes and making good the walls complete as per HPPWD specifications and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Making connection of galvanized steel distribution branch with galvanized mild steel main 20mm to 40mm (twenty millimetre to forty millimeter) nominal bore by providing and fixing tee including cutting and threading the pipe complete as per HPPWD specification, including carriage of materials within all leads, lifts and other incidentals. The rate including Octroi, Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing P.V.C Hindware/Cera/Jaguar or its equivalent plain bend confirming to BIS-14735 including fixing with approved adhesive complete as per HPPWD specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government. Plain bend 150mm (One hundred fifty millimeter) nominal diameters.

Providing and fixing P.V.C Hindware/Cera/Jaguar or its equivalent plain bend confirming to BIS-14735 including fixing with approved adhesive complete as per HPPWD specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government. Plain bend 100mm (One hundred millimeter) nominal diameters.

Providing and fixing ISI marked 150mm (One hundred fifty millimeter) nominal diameters PVC tees (medium class) of Diplast or its equivalent complete as per HPPWD specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing ISI marked 100mm (One hundred millimeter) nominal diameters PVC tees (medium class) of Diplast of equivalent complete as per HPPWD specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing PVC Hindware/Cera/Jaguar or its equivalent heal rest bend confirming to BIS-14735 including fixing with approved adhesive complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government. 150mm (One hundred fifty millimeter) nominal diameters.

Providing and fixing PVC Hindware/Cera/Jaguar or its equivalent heal rest bend confirming to BIS-14735 including fixing with approved adhesive complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government. 100mm (One hundred millimeter) nominal diameters.

Providing and fixing ISI marked PVC Hindware/Cera/Jaguar or its equivalent collar confirming to BIS-14735 complete upto all floor level as per HPPWD specifications or as directed by the Engineer-in-Charge, including fixing with approved adhesive and carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax, Sales tax or any other taxes imposed by the Government. 150mm (One hundred fifty millimeters) nominal diameters.

Providing and fixing ISI marked PVC Hindware/Cera/Jaguar or its equivalent collar confirming to BIS-14735 complete upto all floor level as per HPPWD specifications or as directed by the Engineer-in-Charge, including fixing with approved adhesive and carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax, Sales tax or any other taxes imposed by the Government. 100mm (One hundred millimeters) nominal diameters.

Providing and fixing ISI marked PVC Hindware/Cera/Jaguar or its equivalent cowl confirming to BIS-14735 complete including fixing with approved adhesive upto all floor level as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax, Sales tax or any other taxes imposed by the Government. 150mm (one hundred fifty millimeters) nominal diameters.

Providing and fixing ISI marked PVC Hindware/Cera/Jaguar or its equivalent cowl confirming to BIS-14735 complete including fixing with approved adhesive upto all floor level as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax, Sales tax or any other taxes imposed by the Government. 100mm (One hundred millimeters) nominal diameters.

Providing and fixing ISI marked 110x90mm (One hundred ten millimeters into ninety milimeters) P.V.C (Hindware/Cera/Jaguar or its equivalent) floor trap of self cleaning design complete including fixing with approved adhesive, cost of cutting and making good the walls and floors etc. complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing/laying in trenches P.V.C D-plast or its equivalent pipe class "A" of high pressure soil waste and ventilating pipe including fixing with approved adhesive complete 8/4.6mm (eight/four decimal six millimeters) thick complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government. 150mm (one hundred fifty millimeters) nominal bore/diameters.)

Providing and fixing/laying in trenches P.V.CD-plast or its equivalent class "A" of high pressure soil waste and ventilating pipe including fixing with approved adhesive complete 8/4.6mm (eight/four decimal six millimeters) thick complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government. 100mm (one hundred millimeters) nominal bore/diameters.)

Providing and fixing HIND WARE/CERA MAKE or its equivalent orrisa pattern vitreous china water closet squatting pan (Indian type W.C. pan) size 580mm (five hundred eighty millimeter) (Earth work, bed concrete, foot rest and trap to be measured and paid for separately) including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing HIND WARE/CERA or its equivalent MAKE poly Venyl Chloride 10.00/12.50 (ten/twelve point five zero liters) capacity low level flushing cistern I.S.I marked No. 2603 with a pair of CI or MS brackets complete with fittings such as lead valves less siphon, 15mm (fifteen millimeter) diametre brass ball valve with polythene float, CP brass handles, unions and couplings for connection with inlet, outlet and over flow pipes 40mm (forty millimeters) diametre PVC flush bend and cutting holes in walls and making good the same including connecting the flush bend with cistern and closet complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing ISI marked sand cast iron 100mm ( one Hundred millimeters) size “P” or “S” trap for water closet (squatting pan) including jointing the trap with pan and soil pipe in cement mortar 1:1 (one cement isto one sand), complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing flat back 55x40mm (Fifty five into forty millimetre ) vitreous china wash basin with single hole for pillar tap with CI or MS brackets painted white including cutting holes and making good the same but excluding fitting. complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing vitreous china pedestal of CERA MAKE or its equivalent for wash basin complete recessed at the back for the reception of pipes and fittings complete upto all floor level as per HPPWD specification or as direction of Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing ISI marked, stainless steel kitchen sink 470x420x178mm (four hundred seventy into four hundred twenty into one hundred seventy eight millimeters) diamond model Code No. WB-2116 with C.I or M.S brackets painted white including cutting holes in walls and making good the same complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing 32mm( thirty two millimeters) nominal diameters rubber plug for wash basin or sink (Heavy duty makes ISI marked is No. 8931 -7893) including carriage of materials within all leads, lifts and other incidental. The rate including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimeters) nominal diameters M.I. union for wash basin or sink including carriage of materials within all leads, lifts and other incidental. The rate including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimeters) nominal diameters C.P brass waste pipe of Hindware/Cera/Jaguar or its equivalent for wash basin or sink complete including carriage of materials within all leads, lifts and other incidental. The rate including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing ISI marked, 100mm (One hundred millimeters) diametre sand cast iron grating of Jaguar or equivalent for gully, floor or Nahni trap complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 600x450mm (Six hundred into four hundred fifty millimeters) bevelled edge mirror of superior glass (atultuff or equivalent make) mounted on 6mm (Six millimeters) thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing 600x20mm (six hundred into twenty millimeters) C.P. brass towel rail of Jaguar/Hindware or equivalent complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing 600x120mm (Six hundred into one hundred twenty millimeters) glass shelf with C.P brass bracket and guard rail complete fixed to wooden plugs with C.P brass screws including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing chromium plated brass soap dish with C.P brass brackets fixed to wooden cleats with C.P brass screws complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing chromium plated brass toilet paper holder of approved brand and manufacture (HINDWARE/CERAMAKE) or its equivalent complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing (Jaguar or equivalent make) 15mm (Fifteen millimeters) diameters C.P. brass Pillar tap with capstan head complete upto all floor level as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing Jaguar or its equivalent 15mm (Fifteen millimeters) diameters C.P. brass bib tap ISI marked of approved qualitywith capstan head complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing Jaguar or equivalent 15mm (Fifteen millimeters) diameters C.P. brass bib tap ISI marked of approved quality (superior or heavy type) and colour of prayag polynets syonet complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) diametre CP brass stop cock complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing (Jaguar or equivalent make) 15mm (fifteen millmeters) brass angle valve without nuts and pipes complete including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeters) nominal bore brass full way valve with wheel complete upto all floor level as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing 20mm (Twenty millimeters) nominal bore brass full way valve with wheel complete upto all floor level as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing brass ball valve (horizontal plunger type) high pressure with polythene plastic float complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government (15mm (Fifteen millimeters) nominal bore.

Providing and fixing ISI marked 45cm (forty five centimeters) long and 15mm (fifteen millimeters) nominal bore PVC connection pipe with brass unions complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and placing three layered PVC water storage tank, sintex or equivalent make and of having capacity 500ltr. (Five hundred liters) tank complete in all respects, with necessary fittings including G.I inlet and out let connection over flow pipe ball valve scour pipe, with polythene float valve and mosquito proof PVC cover with locking arrangement including hoisting upto all heights and proving pads of sizes as required for inlet and outlet complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Octroi Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and laying (to level or slopes) 150mm (One hundred fifty millimeters) internal diameters PVC pipe of high pressure including filling the joints with adhesive of approved make for sewerage line complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Octroi Sales tax, Toll tax or any other taxes imposed by the Government

Constructing man hole with RCC top slab in cement concrete 1:2:4 (one cement isto two sand isto four graded stone aggregate 20mm (twenty millimeters) nominal size) mix, foundation concrete 1:4:8(one cement isto four sand isto eight graded crushed stone aggregate 40mm (forty millimeter) nominal size) inside plastering 15mm (fifteen millimeters) thick with cement mortar 1:3 (one cement isto three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty millimeter) nominal size finished smooth complete including curing and testing. Inside size 800x800mm (eight hundred into eight hundred millimeter) and 500mm (five hundred millimeter) deep including C.I. cover with frame (light duty single seal pattern-I) 455mmx610mm (four hundred fifty five millimeters into six hundred ten millimeters) internal dimensions total weight of cover and frame to be not less than 38 kg (thirty eight kilogramme) (weight of cover 23 kg (twenty three kilogramme) and weight of frame 15 kgs (fifteen kilogramme (a) with 300mm (three hundred millimeter) thick walls of square rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (one cement isto three sand) complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate including Octroi Sales tax, Toll tax or any other taxes imposed by the Government.

Constructing man hole with RCC top slab in cement concrete 1:2:4 (one cement isto two sand isto four graded stone aggregate 20mm (twenty millimeters) nominal size) mix foundation concrete 1:4:8(one cement isto four sand isto eight graded crushed stone aggregate 40mm (forty millimeter) nominal size) inside plastering 15mm (fifteen millimeters) thick with cement mortar 1:3 (one cement isto three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty millimeter) nominal size) finished smooth complete including curing and testing. Inside size 800x800mm (eight hundred into eight hundred millimeter) and upto any depth including C.I. cover with frame (light duty single seal pattern-I) 455mmx610mm (four hundred fifty five millimeters into six hundred ten millimeters) internal dimensions total weight of cover and frame to be not less than 38 kg (thirty eight kilogramme) (weight of cover 23 kg (twenty three kilogramme) and weight of frame 15 kgs (fifteen kilogramme (a) with 300mm (three hundred millimeter) thick walls of square rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (one cement isto three sand) complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate including Octroi Sales tax, Toll tax or any other taxes imposed by the Government.

Constructing brick masonry chamber for under ground CI (cast iron) inspection chamber and bends with second class common burnt clay building brick in cement mortar 1:5 (one cement : five sand) CI cover with frame light duty 355x610mm (three hundred fifty five into six hundred ten millimeters) internal dimensions total weight of cover with frame to be not less than 38 kg (thirty eight kilogramme) (weight of cover 23 kg (twenty three kilogramme) and weight of frame 15 kgs (fifteen kilogramme) with RCC top slab in cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty millimeter) nominal size), foundation concrete 1:5:10 (one cement : five sand : ten graded crushed stone aggregate 40mm (forty millimeter) nominal size) inside plastering 15mm (fifteen millimeter) thick with cement mortar 1:3 (one cement isto three sand) finished smooth with a floating coat of neat cement on walls and bed concrete complete, inside dimensions 455x610x450mm (four hundred fifty five into six hundred ten into four hundred fifty millimeters) deep single pipe line complete as per HPPWD specifications and as directed by the Engineer-in-Charge including carriage of materials leads, lifts and other incidentals. The rate including Octroi Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and laying cement concrete 1:5:10 (one cement isto five sand isto ten graded crushed stone aggregate 40mm (forty millimeter) nominal size ) bedding for P.V.C/stone ware pipes of internal diameter 150mm (One hundred fifty millimeters) including necessary form work and curing complete and carriage of materials within all leads , lifts and other incidental. The rate including Octroi Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing 100mm ( One hundred millimetre) nominal size C.I sluice valve (with hand weel) as per IS:78019-784class-I upto 300mm (Three hundred millimeter) diameters including brass spindle and as per IS:2906 class-II for diameter more than 300mm (three hundred millimeter) diameter complete with bolts nuts and rubber washer of standard make complete and carriage of material within all leads, lifts and other incidental. The rate including Octroi Sales tax, Toll tax or any other taxes imposed by the Government.

Providing and laying/fixing 100mm (one hundred millimeter) diameter PVC D-Plast 2.20mm (two point two zero millimeter) thick pipe of supreme or equivalent rain water pipes of working pressures not less than 4.5 kg/Sqm (four point five kilogramme per square metre) including filling the joints with approved adhesive upto all floor level, complete as per HPPWD specifications or as per directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts, and other incidental. The rate including Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

VISHAL DHIMAN GOVT CONTRACTOR