PROVISION OF HANDRAILS IN CERTAIN SERVANT QUARTERS AND OFFICERS QUARTERS IN ORA AND SPECIAL REPAIRS TO EXISTING GUARD POST AND ACCESS ENTRY EXIT IN ETTIKULAM GATE UNDER AGE BR I MAINT AT INA EZHIMALA

Amount

Dismantling single layer of Mangalore pattern tiles in roofing including battens etc of any description complete all as specified and directed.

Dismantling boarding any description, fixed in any position with nails complete all as specified and directed.

Dismantling unframed timber scantlings 40 Sqcm and over in section, in any position complete all as specified and directed.

Dismantling unframed timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sqcm in section complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling of Plain or corrugated sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Supply, fabricate, erect and fix in position Galvanised Iron steel work in tubular sections of 14 Gauge of any size including special shaped washers, posts, purlins, staircase, railing etc complete using ERW or induction butt welded tubes conforming to IS-1239 (part I)-1990 complete all as specified and as directed.

S&F MS Plates (plain or chequered) Fe -410W (Gde E-250, Qlty-A), channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment with riveted, bolted or welded attachment complete all as specified and directed.

M&L for 2 coats of epoxy coated anti corrosive paint over new or untreated steel surfaces after a coat of epoxy primer complete all as specified and directed by Engineer in Charge.

S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour, tile pattern having tensile strength of 550 Mpa as in roof covering to wall fixed with self tapping screws complete all as specified and directed by Engineer in charge.

S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.5 mm thick of any colour, having tensile strength of 550 Mpa as in roof covering to wall fixed with self tapping screws complete all as specified and directed by Engineer in charge.

Disconnecting existing water tank capacity exc 500 Ltrs & n exc 1000 Ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale and dirt, etc., from tanks and from mouths of circulating pipes, etc. complete all as specified and directed by Engineer-in-charge.

S&F rotational moulded polythylene water storage tank (cylindrical vertical with threaded closed top) hoisted and fixed in position all as specified in SSR Part -I (1000Ltrs) capacity complete all as specified and directed by Engineer- in-charge.

Demolition of cement concrete (un-reinforced) Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Excavation over areas n.exc. 1.50 m deep and getting out in hard/ dense soil complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

M&L for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for 75 mm thick cement concrete1:3:6 type C2,using 40 mm stone aggregate finished even & smooth without using extra cement complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate )as in foundations, filling and mass concrete complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F anodized aluminium snap grid frame work for false ceiling (size of grid 605x605mm) complete all as specified and directed.

S&F hangers 6 mm dia GI (upto 1200 mm length) adusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60 mm long and expension hold fastners 12.5 mm dia 40 mm long complete all as specified and as directed.

M&L for non asbestos fiber cement building board 4mm thick fixed in ceiling flat or sloping complete all as specified and directed.

M&L for preparation of newly board ceiling and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 sq. m but n exc 4 sqm each complete all as specified and directed.

S&F powder coated aluminium frame for door, window and partition with one or more rebated including joining cleat for fixing etc (thickness of power coating not less than 50 micron) complete all as specified and directed.

S&F powder coated aluminium window and ventilator shutter powder coating of any colour (thickness of powercoating not less than 50 micron), fixed type without sash bars, aluminium sections weeighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, etc complete all as specified and directed.

M&L for second class hardwood plain, solid, straight chowkats, wrought, framed , rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed.

S&F 30mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides covered with decorative face veneer with lipping/frame to match on both faces complete all as specified and directed.

S&F 12mm Prelaminatd particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

Supply and fix solid PVC door frames of size 50mm x 47 mm made out of 5 mm thick plain/printed coloured PVC sheet reinforced with MS square tube complete all as specified and as directed.

Supply and fix factory made solid panel PVC door shutter 30mm thick (styles) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC Channel having a PVC sheet strip of 20mm width stuck inside with solvent cementfor styles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitten in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading & jointed together with solvent cement complete all as specified and as directed.

S&F mild steel flat iron as in hold fast 25x6 mm confirming to Fe 290 Gde E-165 complete all as specified and directed.

M&L for providing PCC 1:2:4 type B-1 (using 20mm graded aggregate) for hold fast complete all as specified and directed by Engr in Charge.

M&L for preparation and treating small articles, area tarred n.exc 0.10 Sqm each such as in hold fasts end of posts, back of chowkhats complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old painted surfaces of wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F 150 mm size aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 150 mm size aluminum handles, cast type anodised complete all as specified and directed.

S&F 100 mm size aluminum handles, cast type anodised complete all as specified and directed.

S&F stainless steel butt hinge, size 100 mm complete all as specified and as directed.

S&F aluminium alloy, anodized,sliding door bolt with hasp,staple (bolt type ) & fixing clips of sheet ,cast or extruded section & fixing bolt & sliding bolt of extruded section or cast aluminium alloy & fixing 250 mm size complete all as specified and directed.

S&F aluminum (die cast) door closer hydraulically regulated, designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring and overall length of cover plate 140mm complete all as specified and directed.

M&L for aluminum alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminum wire staples complete all as specified and directed.

S&F 4mm thick sheet glass, ordinary quality and glazing within oil putty in square n.exc 0.50 Sqm in each pane complete all as specified and directed.

Demolition of floor hearth or wall tiling including cement mortar bedding, removing serviceable tiles to store and rubbish of the premises complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match & screed bed or bedding layer of cement mortar 1:6, 20mm thick for laying floor finishes complete all as specified and directed.

M&L for non skid joint free ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match & screed bed or bedding layer of cement mortar 1:6, 20mm thick for laying floor finishes complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface exc 0.11 sqm n exc 0.18 sqm 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match & rendering 10mm thick on stone masonry wall surfaces in cement mortar 1:4 for backing coat of skirting, dado etc complete all as specified and directed.

M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment including 15mm thick screed bedding of CM 1:4 complete all as specified and directed.

M&L for machine cut granite of any type slab 20mm thick in floors etc laid over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding and polishing complete including screed bed 15mm thick in CM 1:4 complete all as specified and directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

M&L for Pre-cast cement concrete block masonry with solid blocks type C1, 1:3:6(20mm graded aggregate), exc. 10 cm in width and setting in mortar CM 1:6, complete all as specified and directed.

M&L for reinforced cement concrete Type B0 1:2:4 (12.5 mm graded aggregate) for slabs supported on walls, beams and columns in floors, deck slabs and shelves and the like complete all as specified and directed.

M&L for formwork of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick complete all as specified and directed.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F mild steel TMT bars 6mm to 8mm dia, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Taking down cement plaster any description on brick or stone surface including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of stone surfaces with using WPC & finished even and smooth without using extra cement in external surfaces complete all as specified and directed. (Note:- WPC will be paid and measured separately)

M&L for preparing new plastered or unplastered surface of wall and applying two coat of oil emulsion distemper white or tinted including chalk whiting on wall preparatory to distemper and rubbed with abrasive paper and dusted off complete all as specified and directed.

M&L for preparing new plastered surface and applying two coats of antifungal paint Apex ultima or equivalent over a coat of primer on wall complete all as specified and as directed.

M&L for preparing old plastered surface and applying two coats of antifungal paint Apex ultima or equivalent over a coat of primer on wall complete all as specified and as directed.

M & L for complete removal and preparing old plastered or unplastered surface of wall and applying two coat of oil emulsion distemper white or tinted over a coat of chalk whiting on wall complete all as specified and directed.

M&L for applying 3mm thick wall care putty on wall/ceiling surfaces complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and directed.

Taking down 20 mm GI steel tubing and connections including for refixing or removal to store complete all as specified and directed.

Supplying and laying of 20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

S&F 20 mm bore of ball brass valves, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule & fixed complete all as specified and as directed.

Supply and fix stop valves, cast copper alloy 20 mm bore screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and complete all as specified and directed.

S&F vitreous china wash down water closet (pedestal pattern) white (excluding fixing bolts, flushing cistern ) with plastic water closet seat including fixing of flush pipe to pedestal pan including all joints complete all as specified and directed.

S&F 10 ltr PVC valve less, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F chromium plated health faucets (hand held shower type) with shut off valve (thumb or push button type) to allow controlled and continuous flow of water with adequate length and wall mounted pedestal for hanging the faucet etc complete all as specified and directed.

S&F in repair wash basins, vitreous china flat back of size 550mmx 400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F 15mm fancy type, chromium plated bib taps, with crunch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F 20mm angle cock fancy type, chromium plated with long shank and cup (concealed type) complete all as specified and directed.

S&F 32mm dia PVC flexible waste pipe for urinals/WHB complete all as specified and directed.

S&F towel ring of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms) complete all as specified and directed.

S&F towel rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and directed.

S&F brass chromium plated shower rose 125mm with or without swivel joints including fixing to steel pipe or union complete all as specified and directed.

Supply and fix 32mm dia brass chromium plated bottle traps for wash basin with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified and directed.

M&L for hume pipe RCC septic tank with RCC precast manhole covers having vent pipe etc for 25 users including excavation, return filling and removal if any of any soil incluing all neceaasry fittings an making good as per directed by Engineer-in Charge complete all as specified and directed.

S&F waste pipe 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F waste pipe 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

M&L for cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as bed to drain pipes including packing under & haunching against sides of pipes after they are laid & tested for 110mm dia pipe complete all as specified and directed.

S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 75mm PVC (SWR) bends any radius complete all as specified and directed.

S&F 110mm PVC (SWR) bends any radius complete all as specified and directed.

S&F 75mm PVC (SWR) branch piece Single (single Y) equal or unequal complete all as specified and directed.

S&F 75mm PVC (SWR) junction single (single T) equal or unequal complete all as specified and directed.

S&F PVC (SWR) Nahani /gully trap 125/110 mm with grating on top, setting and jointing with solvent cement complete all as specified and directed.

M&L for flat iron wind tie for fixing to galvalum corrugated sheetings and eaves gutter complete all as specified and as directed.

S&F in repairs PVC Eave Gutters of size 6", half round with edges with brackets/clamp etc complete all as specified and directed by Engineer in Charge.

M&L for 50 mm bore low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq. cm complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose Soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and as directed.

M&L for reinforced cement concrete Type B0 1:2:4 (20 mm graded aggregate) for Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for tubular sections as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete all as specified and as directed.

S&F framed work as in angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of riffle racks also fastening and fixing Fe-410- W(Gde- E-250) quality-A complete all as specified and as directed.

S&F mild steel flat iron for securing wooden planks base plates including all necessary welding, drilling, bolting or riveting etc, and similiar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

S&F MS Plates (plain or chequered) channels, square cut or notched ordinary and counter sunk forming holes, without any attachment complete all as specified and as directed.

S&F Joist, channel as in riffle rack supports confirming to Fe-410 -W (Gde E-250) quality B including necessary welding complete all as specified in drawings and as directed.

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description n.exc 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

S&F second class hard wood boarding 25mm thick planed one side with butt joint complete all as specified and as directed.

M&L for second class hard wood in scantling in wrought timber framed and fixed complete all as specified and as directed.

M&L for preparing of wood and wood based material of any description and girth and applying two coats of fire resistant paint over a coat of primer complete as specified and as directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter complete as specified and as directed.

M&L for reinforced cement concrete Type B0 1:2:4 (20 mm graded aggregate) in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete as specified and as directed.

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions complete as specified and as directed.

M&L for 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 15 mm thick rendering with cement mortar 1:3 complete as specified and as directed.

S&F of Stainless steel letters made out of 2 mm thick SS sheet of Grage 304 with height of each letter not exc 150 mm and fixed on polished granite using adhesives or by any method complete as specified and as directed.

Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section- 3 Earthwork) to a distance of eceeding 1 Km not Exceeding 5Km, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out in soft/loose soil, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and as directed.

M&L for cement concrete 1:2:4 Type B2 using 40 mm graded stone aggregate as in filling and mass concrete compelete all as specified and all as directed.

M&L for PCC 1:2:4 type B-0 using 12.5mm graded stone aggregates as in copings complete all as specified and directed.

Drilling holes in granite or trap stone for bolts, pipes, etc. n. exc 25mm dia complete all as specified and as directed.

S&F MS Anchor fasteners of size 12mm dia and 100mm length for fixing the plates to the wall surface complete all as specified and as directed. Make :- Hilti or equivalent as approved by GE.

Taking down carefully copper/ aluminium point wiring (light, fan and power socket etc) complete including fittings such as switches ceiling roses, pendent, regulators, sockets, MCB/ MCCB/ MCB DB/ earth plug and socket etc and making good matching to the existing colour to the disturbed surface complete all as specified and as directed.

M&L for colour code point wiring FRLS PVC insulated and unsheathed cable with 1.5 sqmm copper conductor single core multistandred 1100 volt grade conforming to IS 694 drawn through PVC conduit of suitable size, concealed / semi concealed suitable size modular metal flush box fitted with modular cover plate with frame (inner/ outer plate) for mounting switches,regulators etc including FRLS 1.5 sqmm earth wire copper insulated wire connected to common earth dolly complete all as specified and as directed for the following:-

(a) One Light/ fan point controlled by one switch.

(b) One 3 pin socket outlet outlet 5 Amps on the same board with other switches.

(c) 5 Amps socket point on independent board.

All as per item no 124 here in above but 2.5 sqmm for 5/15 Amps socket on independent board.

M&L for sub main wiring using 2 runs of 2.5 sq mm FRLS ,IS 694 PVC insulated copper conductor 1100 Volts grade conforming to IS specification drawn through and including PVC conduit/casing caping along with 1 run of 2.5sq mm PVC insulated copper conductor FRLS cable as earth lead connected to common earth dolly complete all as specified and directed by Engr-in-charge. Notes:- (i) One run of PVC conduit/ casing caping, 3 runs of 2.5 sqmm PVC insulated copper conductor cable will be measured as one unit. (ii) Strictly follow the proper colour code red/yellow/blue for phase, black for neutral and green for earth.

S&F modular switch one way 6A ,1 module complete all as specified and directed by Engineer in charge.

S&F modular socket 6 Amps/16 Amps 3 pin 2 module multipurpose ,ISI marked complete all as specified and directed by Engineer in charge.

S&F modular switch one way 16A ,1 module,ISI marked complete all as specified and directed by Engineer in charge.

S&F modular socket 6 Amps 2/3 pin 2 module,ISI marked complete all as specified and directed by Engineer in charge.

S&F lamp holder batten PVC/poly carbonate body ISI marked complete all as specified and directed by Engineer in charge.

S&F 9 W LED lamp with base B22 complete all as specified and directed by Engineer in charge.

S&F ceiling rose 3 terminal PVC/polycarbonate isolated body complete all as specified and directed by Engineer in charge.

S&F modular fan step regulator 2 module, ISI marked complete all as specified and directed by Engineer in charge.

S&F MCB single pole 6 to 32 Amps capacity C series 230 Volts complete all as specified and directed by Engineer in charge.

S&F MCB single pole and neutral 32 Amps capacity, C series, 10 KA, 50 Hz ,230 Volts complete all as specified and directed by Engineer in charge.

S&F in repair MCB DB SPN 230V double door type 8 way with bus bar of appropriate current carrying capacity, neutral link, earth bar and din rail complete all as specified and as directed.

S&F wall mounted 20 W LED 4ft batten output lumen > 100 lumen/watt ,CRI > 60,CCT >5500k ,internal surge protection up to 2 Kv , power factor > 0.93 having extruded aluminium housing provided for efficient heat dissipation with poly carbonate diffuser and integrated electronic driver with all accessories pre-wired and including connecting up 3 core flexible copper conductor cable suitable size from fitting to ceiling rose/connection terminals complete all as specified and directed by Engineer in charge. Make:- Crompton cat No LDL 20 - CDL or equivalent in HAVELLS/ PHILIPS/WIPRO/JAGUAR.

S&F in replacement Environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit LED luminaire out put lumen >100 lumen/w, CCT > 5500 k, power factor > 0.95 comprising of high brightness LEDs 10 W with opal diffuser with all accessories pre-wired and including connecting up with 3core flexible copper conductor cable with suitable size from fitting to ceiling rose/connection terminals complete all as specified and directed by Engineer in charge. Make:- Crompton model STUD or equivalent in Havells/Jaquar / Philips/Wipro.

S&F Post top lantern 35 W, 240 V, energy saving ,enviormental friendly, long life asthetically designed with symmetrical light distribution ,spun aluminium landscape luminaire with high power LED as light source., PF > 0.95 ,with system luminous efficacy > 100Lm/W and CCT 5700K , Internal surge voltage protection 10 Kv complete all as specified and as directed by Engineer in charge. Make:- Havells cat Part No CORALPT35WLED830PSYMTOPC or equivalent in Wipro/Crompton/Philips.

S&F exhaust fan 200 mm sweep AC single phase 230 volts non metalic type including connection from ceiling rose to connection terminal by 3 core 1.5 sqmm copper conductor cable complete all as specified and directed by Engineer in charge.

M&L for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground, earth pit not less than 2.25 meter deep below ground level, connected to 4 mm size galvanized wire as earthing lead by means of bolts, nuts, check nuts, and washers of galvanized iron or steel all as shown in electric plate No 3 of SSR Part I connected to earthing test point all as specified or indicated including provn of necessary excavation and earthwork in any type of soil, PCC pit, RCC cover and 20 mm bore medium grade watering pipe, water funnel with GI wire mesh, 15 mm bore medium grade protection pipe, common salt, charcoal dust, returning filling in of soil, removal of spoil to a distance not exceeding 50 mtr etc including testing on completion complete all as specified and as directed.

Gates Infra Construction Co

GMS Builders

mahadeva traders cotractor and suppliers

KARATHAT ITTYATHI GOPALAN