Construction of Compound wall and flooring around OHT and stacking place at Divisional Store/ Sub Division Office Vijaypur under UT Capex

Amount

Labour engaged for site clearance , dresing and levelling of ground in the premises including dismantling of brick work etc. where required Labour/ machinery to be engaged for lifting of old vehicled and store items i.e. G.I. pipes , transformers, stablizers, machinery etc. to safe/ required place. (JCB = 10 hours @ 1000/ hr LMR)

E/work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5mtr in width) and for shafts, wells, cesspits and the like not exceeding 10Sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated and disposal of surplus excavated earth as direted: All kind of soil

Providing and laying in position cement concrete of 1:4:8 mix (1 cement 4 coarse sand 8 graded stone agg. 40 mm nominal size) excl. cost of centring and shuttering all work up to plinth level (using crushed stone agg.)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level in 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size)and curing complete

Half brick masonry with common brunt clay ( non- modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:4 (1 cement : 4 coarse sand)

Extra for Half Brick work masonry in superstructure above plinth level upto floor V level

Reinforcement cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering finishing and reinforcement with 1:1½:3 (1cement : 1½ coarse sand: 3 graded stone aggregate 20mm nominal size)

Centring and shuttering including strutting, propping etc and removal of form work for foundation, footings, base for columns etc.

Centring and shuttering including strutting, propping etc and removal of form for : Suspended floors, roofs, landings, balconies and access platforms.

Edges of slabs and breaks in floors and walls Under 20 cm wide

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto/above plinth level. Thermo -Mechanically Treated bars of grade Fe-500D or more

15mm thick Cement plaster on the rough side of single or half brick wall of mix:1 : 4 ( 1 cement : 4 coarse sand)

6 mm thick cement plaster to ceiling 1:3 mix

Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete 50mm thick with 20mm nominal size stone aggregate

Providing and laying factory made chamfered edge cement concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc. of required strength , thickness and size / shape made by table vibratory method using PU mould, laid in required colour and pattern over 50 mm thick compacted bed of sand compacting and proper embedding / laying of interlocking paver block into the sand bedding layer through vibratory compaction by using plate vibrator , filing the joints with sand and cutting of paver blocks as per required size and pattern , finishing and sweeping etc. sand complete all as per directions of Engineer-in-charge 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern

Finishing walls with water proofing cement paint of required shade on new work (two or more coats) applied @ 3.84 Kg/10 Sqm

Providing and fixing strips in joints of terrazo/ cement concrete floors 40mm wide and 6 mm thick

Providing and laying vitrified floor tiles in different sizes ( thickness to be specified by the manufacturer) with water absorption less than 0.08 % and conforming to IS: 15622 approved make in all colours and shades laid on 20mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) including grouting the joints with white cement and matching pigments etc. complete size of tile 500 x 500 mm

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 ( thickness to be specified by the manufacturer) of approved make , in all colours , shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge, in skirting , risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in complete

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 265 mm and 340 x 410 x 265 mm sizes respectively with automatic flushing system with starndard fluh pipe and C.P. brass spreaders with brass unions and G. I. clamps complete . including painting and fitting and brackets, cutting and making good the walls and floors where required Range of two urinal basins with 5 litres white PVC automatic flushing system

Providing and fixing G.I. pipe with G.I. fittings and clamps including cutting and making good the walls etc. 15 mm dia nominal bore b- class (Medium)

Making interconnection of Gi distribution branch with GI Main by providing and fixing tee, union incl. cutting and threading of pipe etc complete 25mm to 40mm dia.

Providing and fixing of brass bib cock of approved quality 15 mm nominal bore

Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge

Distempering with dry distemper of approved brand and manufacturer ( one or more coats) and required shades on old work to give an even shade

Providing and fixing false ceiling at all height and PVC wall panelling (LMR)

Providing and fitting concealed internal Electrification of room including 4 Nos LED lights, Fan points 2 No., Fuse box 1 No., 2 no 15 Amp sockets with switch, 5 Amp 2 no. sockets with switch - of approved brand and 04 nos LED security lights 30 watts, Main switch with complete wiring, with MS bracket for pole mounting complete including service line up to a length of 10 meters.

Carriage of Sand by Mechanical Transport from source (to be identified by engineer in charge) to site of work including cost for loading and unloading.for an av. distance of Average 05 km

Carriage of stone aggregate ( Crushed) upto 20 mm by Mechanical Transport from source (to be identified by engineer in charge) to site of work including cost for loading and unloading.for an av. distance of Average 10 km

Carriage of stone aggregate (Crushed) upto 40-65 mm by by Mechanical Transport from source (to be identified by engineer in charge) to site of work including cost for loading and unloading.for an av. distance of Average 10 km

Carriage of Bricks by Mechanical Transport from source (to be identified by engineer in charge) to site of work including cost for loading and unloading.for an av. distance of Average 05 km

RIAZ AHMED

YASIN MANZOOR