Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.3 LAccepted-AOC DHARMANAGAR NORTH TRIPURA | ₹6.3 L | L1 | Accepted-AOC Stood L1 |
| 2 | L2₹6.7 L+₹38,036 (6.03%)Rejected-Finance | ₹6.7 L+₹38,036 (6.03%) | L2 | Rejected-Finance Higher than L1 |
| 3 | L3₹6.9 L+₹56,181 (8.91%)Rejected-Finance | ₹6.9 L+₹56,181 (8.91%) | L3 | Rejected-Finance Higher than L1 |
| 4 | L4₹7.4 L+₹1.1 L (18.1%)Rejected-Finance | ₹7.4 L+₹1.1 L (18.1%) | L4 | Rejected-Finance Higher than L1 |
| 5 | L5₹7.5 L+₹1.2 L (19.7%)Rejected-Finance | ₹7.5 L+₹1.2 L (19.7%) | L5 | Rejected-Finance Higher than L1 |
Tender Value
₹9.7 L
EMD Value
₹19,406
Closing Date
11 Jun 2026, 3:00 pmClosed
The Executive Engineer, DWS Division Dharmanagar
Office of the Executive Engineer, DWS Division Dharmanagar, North Tripura PIN _799250
RWS/JJM in North Tripura District of DWS Division Dharmanagar 2026-27/SH- Replacement, mtc. of electrical accessories, pump motor etc. in/c. lowering, lifting, allied works of different SBDTW of Kadamtala Block of DWS Sub-Division, Dharmanagar/Gr.-I
2026_CEDWS_73366_1
09/EE/DWS/DMN/2026-27
Open Tender
Civil Works - Water Works
Percentage
180 days
Dharmanagar
Please Refer Bid Document
6 documents required · 6 mandatory
₹1,000
₹19,406
29 Jul 2026
2 Jun 2026
11 Jun 2026
2 Jun 2026
11 Jun 2026
2 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Lifting of submerssible pump of 45.0 Mtr. Head with suitable single phase submerssible motor including additional 32.00 Mtr submersible 3 core copper flat cable(2.5 mm2 size) complete all respect as per direction of the Engineer-in- Charge.
a) for 2000 GPH capacity submersible pump with 3HP submersible motor. | 25 | Nos | 2,054 | ₹51,350 |
| 2 | Repair and maintenance of submessible Motor suitable for submerssible pumpset by complete dismantling in/c providing & fitting fixing of PVC ( IS : 8783-1978 ) insulated electro grade copper ( IS : 613-1984 ) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge.
i) 3.0 HP Motor suitable for 2000/2500 GPH capacity submerssible pumpse | 22 | Nos | 7,445.2 | ₹1,63,794.4 |
| 3 | Providing and fixing of UPVC end cap / well cap suitable for UPVC 'CM' casing or 'CS' casing or 'RS' pipes as per specification and direction of the Engineer - in - charge.
i) 150 mm dia | 8 | No. | 589.1 | ₹4,712.8 |
| 4 | Providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for DIN fuses), triple pole with Neutral Link (TPN), 415/500 Volt, L & T / Havells / BCH make etc. complete as per specification and direction of the Engineer-in-charge
ii). 32 amps | 25 | Nos | 5,266 | ₹1,31,650 |
| 5 | Providing and fitting fixing with PVC insulated single core multistrand Copper cable conforming to IS : 694 for inter connection with all electrical equipments of the pannel board as per specification and direction of the Engineer-in-charge.
i) 10 sqmm | 112 | Mtr. | 269.9 | ₹30,228.8 |
| 6 | Washing and development of the tube well by air compressor and testing of the tube well as per direction of the Engineer in charge..
ii. 100 mm dia | 10 | Nos | 10,530 | ₹1,05,300 |
| 7 | Supplying and fitting fixing of B 13 ( size width 450mmXlength 1200mmX height 850mm) fitted with 4 nos suportt of 75 mm X 75mm( 6mm thick) M.S. angle for embedding in 1:2:4 cement concrete base ( size 300 mm X 300 mm dia X600 mm) with proper locking arrangement and coated with anti corrosive main switch energy metter etc complete in all respect as per derection of the Engineer in charge. | 12 | nos | 10,000 | ₹1,20,000 |
| 8 | Providing and fixing C.I. non-return valve of approved quality as per CPWD specification and direction of the Engineer - in charge.
i. 50 mm nominal bore | 4 | Nos | 3,626.1 | ₹14,504.4 |
| 9 | Providing and fitting fixing G.I. pipe (medium class) conforming to IS : 1239 for Mark II/III as per specification and direction of the Engineer-in-charge.
D. 40 mm NB | 244 | Mtr. | 493.1 | ₹1,20,316.4 |
| 10Providing and fitting fixing of brass fullway valve with handle in the GI pipe line including cutting, threading etc. complete as per CPWD specification and direction of the Engineer - in - charge. | |||||
stage.html
html • 0.05 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_74662.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 2.84 MB
BOQ_74662.xls
BOQ • 0.37 MB
DNIeT09EE.pdf
Tender Documents • 1.99 MB
datecorrigendumPNIeT04.pdf
PDF • 0.51 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .