BID DOCUMENTS FOR GARDEN DEVELOPMENT AT TP NO-5 FP NO-578 IN SANAND NAGARPALIKA

Schedule No Name of Work

Schedule – B1 GARDEN DEVELOPMENT AT TP NO-5 FP NO-578 (Approved grant work)

Schedule – B2 Comprehensive Operation and Maintenance for 4 years (2nd year to 5th year from self-grant)

I/We am/are willing to carry out the work @ % Above / Below Percentage (should be writen in figures and

words) of the Estimated rates mentioned above amount of my / our Tender works out as under.

Estimated Amount Estimated Amount

Put to Tender Rs. Put to Tender Rs.

Add % Rs. Deduct %Rs.

Total Rs. Total Rs.

(In Words (In Words

Consultant City Engineer

CC Patel and Associates Pvt Ltd

Sanand Nagarpalika

Sanand Nagarpalika

SANAND NAGARPALIKA

NAME OF PROJECT :-GARDEN DEVELOPMENT AT TP NO-5 FP NO-578 IN

SANAND NAGARPALIKA

No Description Estimated Amount

1 Security cabin

2 Store room & Electric pannel room

4 Miyawaki and Landscapping

5 compound wall

6 Electrical work

Maintenance for 1st year

Maintenance for 2nd to 4th year

NOTE : The bidder will have to demolish existing structure what so ever present on current site, clear

site and will have to recover an amount of rs 32,000/- from scrap. This amount will be deducted from

the first RA bill.

SANAND NAGARPALIKA

NAME OF PROJECT :-GARDEN DEVELOPMENT AT TP NO-5 FP NO-578 IN SANAND NAGARPALIKA

Sub Estimate 01 - SECURITY CABIN

Description QTY UNIT RATE AMOUNT

Excavation for foundation up to 1.5mt. depth

1 including sorting out and stacking of useful materials 20.00 CMT 117.08

and disposing of the excavated stuff up to 50 meter

lead. (A) loose soil

Filling available excavated earth (excluding rock) in

2 trenches, plinth, sides of foundations etc. in layers 14.00 CMT 130.40

not exceeding 20cm in depth consolidating each

deposited layer by ramming & watering.

Providing and laying cement concrete 1:3:6 (1

Cement: 3 Coarse Sand: 6 hand broken stone

3 aggregates 40 mm nominal size) and finishing smooth 2.50 CMT 4046.22

with curing complete excluding the cost of formwork

and excluding the cost of reinforcement. In

foundation and plinth.(upto 10 ton).

Providing and laying controlled cement concrete M-

250 and finishing smooth with curing etc complete

including the cost of providing formwork with

ordinary timber planking but excluding the cost of

reinforcement for foundations, footings, bases of

column etc. & mass concrete at all heights, all places,

all levels within the site premises as directed by the

Engineer - in - Charge.

Providing and laying controlled cement concrete M-

250 and finishing smooth with curing etc complete

5 including the cost of providing formwork with 2.00 CMT 8650.65

sheeting of steel sheets but excluding the cost of

reinforcement for columns, pillars, posts, struts, walls

etc. at all heights, all places, all levels within the site

premises as directed by the Engineer - in - Charge.

Providing and laying controlled cement concrete M-

250 and finishing smooth with curing etc complete

including the cost of providing formwork with

sheeting of steel sheets but excluding cost of

6 reinforcement for sides and soffits of beams, beam 3.00 CMT 6660.95

haunchings, cantiliesrs, copings and lintets not

exceeding 1 m in depth etc. at all heights, all places,

all levels within the site premises as directed by the

Engineer - in - Charge.

Providing laying Controlled cement concrete M-250

and curing complete including the cost of form work

and excluding cost of reinforcement for reinforced

concrete work in :RCC Slabs & Landings

Providing laying ordinary cement 1:2:4 cement

concretecuring complete excludung the cost of form

work and excluding cost of reinforcement for

reinforced concrete work in grade Slab

Brick work using common burnt clay building bricks

having crushing strength not less than 35kg/Sqcm. in

Super Structure. In cement mortar 1:6 (1 cement :

fine sand) (A) Fly Ash

Providing and applying average 10 mm. thick single

coat Cement finish smooth plaster in CM 1:4 (1

cement : 4 coarse river sand), on ceilings, stair soffits

etc.as per instructions of EIC at all floors / all levels /

all heights / all shapes including dense hacking to

concrete surface, scaffolding, curing, including

applying neat cement slurry on RCC Surface etc.

complete as per drawing / specifications and / or as

directed by the Engineer-in-charge. for all civil,

plumbing, electrical & infrastructure works.

Providing and applying average 15 mm. thick Cement

finished cement plaster in single coat on fair side of

brick, concrete walls for interior plastering for all

floors, at any height and finished even and smooth in

CM 1:4. (1 cement : 4 coarse river sand), including

dense hacking to concrete surface (minimum

hacks of 10-15mm depth per sq.ft), scaffolding,

10 curing, making grooves (at junction of slab & beam, 37.00 SMT 157.17

two different materials like brick & concrete surfaces,

periphery of openings, below sills, above lintels,

above skirting - horizontally or vertically), forming

pattas including applying neat cement slurry on RCC

Surface etc. complete as per drawing / specifications

and / or as directed by the Engineer-in-charge. for all

civil, plumbing, electrical & infrastructure works.

20 mm. thick sand face Gutkha finish cement plaster

on walls upto 10 meters above ground level

11 consisting of 12 mm. thick backing coat of C.M. 1:3 (1 28.00 SMT 300.66

cement : 3 sand) and 8 mm. thick finishing coat of

C.M. 1:1 (1 cement : 1 sand) etc. complete

P & L 24" x 24" vitrified 8 mm thick tile flooring over

20 mm (average) base of cement mortar 1:6 (1

cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including

dismentaling of existing flooring and jointed with

color cement slurry including finised with flush

pointing & cleaning the surface etc. complete for light

shade (upto 10 ton)

13 Providing and fixing G.I rain water spout of 50 mm 2.00 Nos 101.91

diameter and 30 cm length.

Distempeing (Two coats)with oil bound washable

distemper of approved brand and manufacture and of

required shade on wall surfaces to givean even shade,

over and including a priming coat with distemper

primer of approved brand and manufacture after

thoroughly brushing the surface free from mortar

dropping and other foreign matter and also including

preparing the surface even and sand papered smooth

Finishing wall with weather proof exterior emulsion

paint on wall surface (two coats) to give an required

shape even shade after thoroughly brushing the

surface to remove all dirt, and remains of loose

powdered materials.etc complete. The rate shall be

including of providing two coats of primer of

approved brand and manufacturer on new wall

surfaces to give and even shade including throughly

brushing the surface free from mortar dropping and

other foreign matter and sand papered smooth.

Providing and fixing window having extruded

aluminum colour anodized section frame main outer

size 63.50 x 38.10x 1.95mm (of Jindal section no.

4605@ Wt. 1.094 Kg/Rmt), horizontal two track

member size 61.85mm x 31.75mm x 1.20mm (of

Jindal section no. 8687, @ Wt. 0.695 Kg/mt), vertical

member of size 61.85mm x31.75mm x 1.30mm (of

Jindal section no. 8758 @ Wt. 0.659 Kg/mt) with

16 sliding shutters of horizontal member size 40mm x 3.00 SMT 1713.70

18mm x 1.29mm (of Jindal Section No. 8949 @ Wt. of

0.456 Kg/mt), vertical member of size 40mm x 18mm

x 1.29 mm (of Jindal section no: 8947 @ Wt. of

kg / mt / section 8948, @ Wt. 0.457 kg/mt) with

mm thk tinted float glass with powder coated

aluminum fittings and fixtures and transparent silicon

sealant glass fixing to frame as per details etc

completed for window.

Providing and fixing 10cm x 7.5 cm indian teak wood

door frame & flush door both sides laminated and

I.T.W. beading all around. Shutter shall be fabricated

from 35 mm thick solid core malemine faced three

layered pre laminated flat pressed wood based

exterior grade bonded BWP/BWR synthetic resin

17 having stamped IS 12823 grade I type II and Stainless 2.10 SMT 5469.15

steel decorative type designs fixtures / fastening

1Nos.S.S. Pipe Handle for door 30 cm size of ASIS

Grade, 2Nos. S.S. Aldrop 30 cm long of ASIS

Grade, Tower Bolt - SS 202 - 6", S.S. Door / window

Hinges 4x1"x1" etc. as per architectural detailed

drawing and as directed by engineer in charge.

Applying two coats of putty & two coats of primer of

approved brand and manufacture on new wall

18 surface to give an even shade including thoroughly 46.00 SMT 40.60

brushing the surface free from mortar dropping and

other foreign matter and sand papered smooth

Providing and laying average 65 mm thick IPS, water

proof cement concrete flooring in 1:2:4 (1 Cement :

Sand : 4 Graded Aggregate 10mm nominal size) to

RCC, under ground tanks at all heights in line, level

and gradient including mixing water proofing

compound of ConTech Chemicals or equivalent in

recommended proportions as approved by the

Architect and Engineer-in-charge and leaving the

surface rough wired finish to receive any type of

flooring / smooth finish etc complete including

furnishing a guarantee bond for 10 years. Rate shall

be inclusive of curing, scaffolding etc. as directed.

Providing TMT Fe 500 bar reinforcement for R.C.C.

20 work including bending, binding and placing in 932.00 Kg 76.22

position complete up to floor two level. (upto 10 ton).

Providing & laying approved quality mirror finished

granite or any approved stone of approved shade,

thickness 18 mm. to 20 mm, in skirting, riser and

dado in required sizes and shapes, set with cement

slurry (minimum 3.3 kg cement/ m2) including

average 10 mm thick cement mortar bedding in 1:1 (1

cement: 1 fine sand) laid and jointed with white

cement and matching pigment including rubbing, re-

polishing after fixing to remove any undulation

21 between the joints (if required) with different grades 6.03 SMT 3398.65

of Emery, refilling of open joints, curing, daily

cleaning and mopping, shall be done up to the

satisfaction of the EIC (Only finished work will be

measured.) etc. all complete as per approved sample

by Architect, drawings and instruction of EIC. at all

floors / all levels / all heights and all shapes. The rate

includes machine cut edges of uniform thickness,

beveling and mirror polishing of edges.BAsic Rate of

Stone Rs. 1000 / Sqm FOR

MS Grill:-Providing and fixing M.S.grills of required

patter to wooden frames of window etc.with M.S.

21 flats at required spacings and frame alround, square 40.00 Kg 101.18

or round bars with round headed bolts and nuts or by

screws or welding (A) Plain Grill.

SANAND NAGARPALIKA

NAME OF PROJECT :-GARDEN DEVELOPMENT AT TP NO-5 FP NO-578 IN SANAND NAGARPALIKA

Sub Estimate 02 - STORE ROOM and ELECTRICAL PANNEL ROOM

Sr No Description QTY UNIT RATE AMOUNT

Excavation for foundation up to 1.5mt. depth

including sorting out and stacking of useful

materials and disposing of the excavated stuff up

to 50 meter lead. (A) loose soil

Filling available excavated earth (excluding rock) in

trenches, plinth, sides of foundations etc. in layers

not exceeding 20cm in depth consolidating each

deposited layer by ramming & watering.

Providing and laying cement concrete 1:3:6 (1

Cement: 3 Coarse Sand: 6 hand broken stone

aggregates 40 mm nominal size) and finishing

smooth with curing complete excluding the cost of

formwork and excluding the cost of reinforcement.

In foundation and plinth.(upto 10 ton).

Providing and laying controlled cement concrete

M-250 and finishing smooth with curing etc

complete including the cost of providing formwork

with ordinary timber planking but excluding the

cost of reinforcement for foundations, footings,

bases of column etc. & mass concrete at all

heights, all places, all levels within the site

premises as directed by the Engineer - in - Charge.

Providing and laying controlled cement concrete

M-250 and finishing smooth with curing etc

complete including the cost of providing formwork

with sheeting of steel sheets but excluding the cost

of reinforcement for columns, pillars, posts, struts,

walls etc. at all heights, all places, all levels within

the site premises as directed by the Engineer - in -

Providing and laying controlled cement concrete

M-250 and finishing smooth with curing etc

complete including the cost of providing formwork

with sheeting of steel sheets but excluding cost of

6 reinforcement for sides and soffits of beams, beam 11.00 CMT 6660.95

haunchings, cantiliesrs, copings and lintets not

exceeding 1 m in depth etc. at all heights, all

places, all levels within the site premises as

directed by the Engineer - in - Charge.

Providing laying Controlled cement concrete M-

7 250 and curing complete including the cost of form 4.00 CMT 6578.13

work and excluding cost of reinforcement for

reinforced concrete work in :RCC Slabs & Landings

Providing laying ordinary cement 1:2:4 cement

concretecuring complete excludung the cost of

form work and excluding cost of reinforcement for

reinforced concrete work in grade Slab

Brick work using common burnt clay building bricks

having crushing strength not less than 35kg/Sqcm.

8 in Super Structure. In cement mortar 1:6 (1 cement 17.00 CMT 5171.15

Half brick masonry in common burnt clay building

bricks having crushing strength not less than

Kg/Sq.Cm. in Cement mortar 1:4 (1 - Cement : 1 -

Fine sand) in superstructure. (A) Fly Ash

Providing and applying average 10 mm. thick single

coat Cement finish smooth plaster in CM 1:4 (1

cement : 4 coarse river sand), on ceilings, stair

soffits etc.as per instructions of EIC at all floors / all

levels / all heights / all shapes including dense

10 hacking to concrete surface, scaffolding, curing, 22.00 SMT 115.81

including applying neat cement slurry on RCC

Surface etc. complete as per drawing /

specifications and / or as directed by the Engineer-

in-charge. for all civil, plumbing, electrical &

infrastructure works.

Providing and applying average 15 mm. thick

Cement finished cement plaster in single coat on

fair side of brick, concrete walls for interior

plastering for all floors, at any height and finished

even and smooth in CM 1:4. (1 cement : 4 coarse

river sand), including dense hacking to concrete

surface (minimum 50 hacks of 10-15mm depth per

sq.ft), scaffolding, curing, making grooves (at

junction of slab & beam, two different materials

like brick & concrete surfaces, periphery of

openings, below sills, above lintels, above skirting -

horizontally or vertically), forming pattas including

applying neat cement slurry on RCC Surface etc.

complete as per drawing / specifications and / or

as directed by the Engineer-in-charge. for all civil,

plumbing, electrical & infrastructure works.

20 mm. thick sand face Gutkha finish cement

plaster on walls upto 10 meters above ground level

12 consisting of 12 mm. thick backing coat of C.M. 1:3 3.00 SMT 300.66

(1 cement : 3 sand) and 8 mm. thick finishing coat

of C.M. 1:1 (1 cement : 1 sand) etc. complete

P & L 24" x 24" vitrified 8 mm thick tile flooring

over 20 mm (average) base of cement mortar 1:6

(1 cement: 6 coarse sand) on new surface or fixing

on existing flooring by adhesive material including

dismentaling of existing flooring and jointed with

color cement slurry including finised with flush

pointing & cleaning the surface etc. complete for

light shade (upto 10 ton)

14 Providing and fixing G.I rain water spout of 50 mm 8.00 Nos 101.91

diameter and 30 cm length.

Distempeing (Two coats)with oil bound washable

distemper of approved brand and manufacture

and of required shade on wall surfaces to givean

even shade, over and including a priming coat with

15 distemper primer of approved brand and 72.00 SMT 76.85

manufacture after thoroughly brushing the surface

free from mortar dropping and other foreign

matter and also including preparing the surface

even and sand papered smooth

Finishing wall with weather proof exterior

emulsion paint on wall surface (two coats) to give

an required shape even shade after thoroughly

brushing the surface to remove all dirt, and

remains of loose powdered materials.etc

16 complete. The rate shall be including of providing 3.00 SMT 114.54

two coats of primer of approved brand and

manufacturer on new wall surfaces to give and

even shade including throughly brushing the

surface free from mortar dropping and other

foreign matter and sand papered smooth.

Providing and fixing standard extruded of

aluminium section of size 63mm x 38.10 x 1.2mm

17 (Jindal section :2434, @ Wt. 0.643 Kg/mt) with 1.00 SMT 1301.82

colour anodised aluminium frame for ventilation

with 5mm thick frosted glass as details etc.

complete for ventilation

Providing and fixing 10cm x 7.5 cm indian teak

wood door frame & flush door both sides

laminated and I.T.W. beading all around. Shutter

shall be fabricated from 35 mm thick solid core

malemine faced three layered pre laminated flat

pressed wood based exterior grade bonded

BWP/BWR synthetic resin having stamped IS

grade I type II and Stainless steel decorative type

designs fixtures / fastening 1Nos.S.S. Pipe Handle

for door 30 cm size of ASIS 316 Grade, 2Nos. S.S.

Aldrop 30 cm long of ASIS 304 Grade, Tower Bolt -

SS 202 - 6", S.S. Door / window Hinges 4x1"x1"

etc. as per architectural detailed drawing and as

directed by engineer in charge.

Applying two coats of putty & two coats of primer

of approved brand and manufacture on new wall

surface to give an even shade including thoroughly

brushing the surface free from mortar dropping

and other foreign matter and sand papered

Providing and laying average 65 mm thick IPS,

water proof cement concrete flooring in 1:2:4 (1

Cement : 2 Sand : 4 Graded Aggregate 10mm

nominal size) to RCC, under ground tanks at all

heights in line, level and gradient including mixing

water proofing compound of ConTech Chemicals

20 or equivalent in recommended proportions as 20.00 SMT 376.73

approved by the Architect and Engineer-in-charge

and leaving the surface rough wired finish to

receive any type of flooring / smooth finish etc

complete including furnishing a guarantee bond for

10 years. Rate shall be inclusive of curing,

scaffolding etc. as directed.

Providing TMT Fe 500 bar reinforcement for

21 R.C.C. work including bending, binding and 2880.00 Kg 76.22

placing in position complete up to floor two level.

Providingandfixingcast iron(Spun)Nahni trap of the

following nominal diameter of self cleaning

designwith C.I. screaed downor higned grating

including cost of cutting and making good the walls

and floor 100 mm inlet and 50 mm

outlet.(C)100mm dia.

Providing and fixing Kitchen sink with C.I. or M.S.

brackets, painted white including cutting holes in

23 walls and making good the same but excluding 1.00 Nos 2280.27

fittings.(C)Vitreous China Sink. (i)600mmx450mmx

Providing and fixing C.P.brass waste for washbasin

or sink. (B) 40mm dia.

Providing and fixing pillar tap,capstan head,screw

25 down high pressure withscrews, shank sand back 1.00 Nos 308.73

nuts. (i) 15mm dia

Providing and fixing Gunmetal check or non-return

fullway wheel valve.(C) 25mm dia.

Providing and fixing chromium plated brass half

27 trun flush cock of approved quality including fixing 1.00 Nos 254.79

in pipe line etc. complete.(i) 20mm dia.

Providing and fixing ball cock of approved.quality

as directed.(A) Copper Metal (i) 25mm dia

Providing layingand jointing intrue line and level

15mmdia.U.P.V.C.Pipe(SCH-40) for cold water

including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the

29 help of clamp at every twometre C/C or shall be 20.00 RMT 72.65

concealedas directed including necessary fittings

etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of

Providing layingand jointing intrue line and level

25mmdia.U.P.V.C.Pipe(SCH-40) for cold water

including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the

30 help of clamp at every twometre C/C or shall be 15.00 RMT 91.24

concealedas directed including necessary fittings

etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of

Providing and fixing S.W.gully trap with C.I. grating

brick masonry chamber and water tight C.I. cover

31 with frame of 300mmx300 mmsize (inside) with 1.00 Nos 1246.92

standard weight. (i)Square mouth traps.(B)150mm

x 100mm size P or R type

32 PVC SWR pipes IS 13592 for Drain - 160 mmdia 10.00 RMT 286.84

Providing erecting and fixing double coated ISI

33 water tank of required capacity each with all 2000.00 Liter 3.95

necessary fittings and connectionetc. completeon

Providing and laying colored glazed tiles 6mm thick

in skrting risers of steps and dedo on 10 mm thick

cement plaster 1:3 (1-cement :3-coarse sand) and

jointed with white cement slurry

Providing & laying approved quality mirror finished

granite or any approved stone of approved shade,

thickness 18 mm. to 20 mm, in skirting, riser and

dado in required sizes and shapes, set with cement

slurry (minimum 3.3 kg cement/ m2) including

average 10 mm thick cement mortar bedding in 1:1

(1 cement: 1 fine sand) laid and jointed with white

cement and matching pigment including rubbing,

re-polishing after fixing to remove any undulation

35 between the joints (if required) with different 9.46 SMT 3398.65

grades of Emery, refilling of open joints, curing,

daily cleaning and mopping, shall be done up to

the satisfaction of the EIC (Only finished work will

be measured.) etc. all complete as per approved

sample by Architect, drawings and instruction of

EIC. at all floors / all levels / all heights and all

shapes. The rate includes machine cut edges of

uniform thickness, beveling and mirror polishing of

edges.BAsic Rate of Stone Rs. 1000 / Sqm FOR

MS Grill:-Providing and fixing M.S.grills of required

patter to wooden frames of window etc.with M.S.

36 flats at required spacings and frame alround, 46.00 Kg 101.18

square or round bars with round headed bolts and

nuts or by screws or welding (A) Plain Grill.

Providing and fixing window having extruded

aluminum Colour anodized section frame main

outersize 63.50x38.10x1.95mm ,@Wt1.094Kg/Rmt

,horizontal two track member size 61.85 mmx

31.75mm x1.20mm @ wt. of 0.695Kg/mt, vertical

member of size 61.85 mm x31.75 mm x 1.30mm@

wt.of 0.659 Kg/mt with sliding shutters of

37 horizontal member size 40 mm x 18mm x1.29mm 3.00 sqm 1713.70

@wt.of0.456Kg/mt, vertical member of size 40mm

0.457Kg/mt with 5mmthick transparentbronze

colour tinted float glass with powder coated

aluminum fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details

etc complete for window

SANAND NAGARPALIKA

NAME OF PROJECT :-GARDEN DEVELOPMENT AT TP NO-5 FP NO-578 IN SANAND NAGARPALIKA

Sub Estimate 03 - GARDEN WORK

No Description QTY UNIT RATE AMOUNT

Excavation for foundation up to 1.5mt. depth

1 including sorting out and stacking of useful 866.00 CMT 117.08

materials and disposing of the excavated stuff

up to 50 meter lead. (A) loose soil

Filling available excavated earth (excluding

rock) in trenches, plinth, sides of foundations

2 etc. in layers not exceeding 20cm in depth 763.00 CMT 130.40

consolidating each deposited layer by

ramming & watering.

Providing and laying cement concrete 1:3:6 (1

Cement: 3 Coarse Sand: 6 hand broken stone

aggregates 40 mm nominal size) and finishing

3 smooth with curing complete excluding the 80.00 CMT 4046.22

cost of formwork and excluding the cost of

reinforcement. In foundation and plinth.(upto

Providing and laying controlled cement

concrete M-250 and finishing smooth with

curing etc complete including the cost of

providing formwork with ordinary timber

4 planking but excluding the cost of 14.00 CMT 5147.97

reinforcement for foundations, footings, bases

of column etc. & mass concrete at all heights,

all places, all levels within the site premises as

directed by the Engineer - in - Charge.

Providing and laying controlled cement

concrete M-250 and finishing smooth with

curing etc complete including the cost of

providing formwork with sheeting of steel

5 sheets but excluding the cost of 5.00 CMT 8650.65

reinforcement for columns, pillars, posts,

struts, walls etc. at all heights, all places, all

levels within the site premises as directed by

the Engineer - in - Charge.

Brick work using common burnt clay building

bricks having crushing strength not less than

6 35kg/Sqcm. in Super Structure. In cement 64.00 CMT 5171.15

mortar 1:6 (1 cement : 6 fine sand)

Providing and applying average 15 mm. thick

Cement finished cement plaster in single coat

on fair side of brick, concrete walls for interior

plastering for all floors, at any height and

finished even and smooth in CM 1:4. (1

cement : 4 coarse river sand), including dense

hacking to concrete surface (minimum

hacks of 10-15mm depth per sq.ft),

scaffolding, curing, making grooves (at

7 junction of slab & beam, two different 201.00 SMT 157.17

materials like brick & concrete surfaces,

periphery of openings, below sills, above

lintels, above skirting - horizontally or

vertically), forming pattas including applying

neat cement slurry on RCC Surface etc.

complete as per drawing / specifications and /

or as directed by the Engineer-in-charge. for

all civil, plumbing, electrical & infrastructure

Finishing wall with weather proof exterior

emulsion paint on wall surface (two coats) to

give an required shape even shade after

thoroughly brushing the surface to remove all

dirt, and remains of loose powdered

materials.etc complete. The rate shall be

including of providing two coats of primer of

approved brand and manufacturer on new

wall surfaces to give and even shade including

throughly brushing the surface free from

mortar dropping and other foreign matter and

sand papered smooth.

Providing and laying average 65 mm thick IPS,

water proof cement concrete flooring in 1:2:4

(1 Cement : 2 Sand : 4 Graded Aggregate

10mm nominal size) to RCC, under ground

tanks at all heights in line, level and gradient

including mixing water proofing compound of

ConTech Chemicals or equivalent in

recommended proportions as approved by the

Architect and Engineer-in-charge and leaving

the surface rough wired finish to receive any

type of flooring / smooth finish etc complete

including furnishing a guarantee bond for

years. Rate shall be inclusive of curing,

scaffolding etc. as directed.

Providing TMT Fe 500 bar reinforcement for

10 R.C.C. work including bending, binding and 1350.00 Kg 76.22

placing in position complete up to floor two

level. (upto 10 ton).

Providing and laying polished Kota stone slab

flooring over20mm(Average thick base of

cement mortar 1:6 (1-cement:6-coarsesand)or

11 L.M.1.1.5 (1-Lime putty :1.5- coarse sand) laid 24.00 SMT 992.66

over and jointed with grey cement slurry

mixed with pigment to match the shadeof slab

including rubbing and polishing etc. complete.

Providing and fixing pre-cast concrete kerb

stone of gray cement based concrete block

cm length, 30cm height and 15cm thick of

M250 grade concrete as per aprooved design

and including excavation for fixing in proper

line and level, filling the joint with C:M 1:3 (1-

Cement : 3- Fine sand) etc. complete (uptp

Supplying and installing EPDM granules

method teracota made of two layered water

permeable all weather material of 2mm

spread coat top with EPDM granules on

mm in situ poly eurythene bonded rubber

granulate subbase layer of longer life and

13 better UV resistance laid on IPS or PCC surface 83.00 RMT 3085.55

free from paint, wax, grease, oil, dust and dirt.

The item includes cost of material, cleaning of

IPS or PCC surface before installation and

installation of the two layered track with

proper slopes. Preparation of IPS or PCC shall

be paid under relevant item.

Providing and fixing pre-cast Rubber Dye inter

locking concrete block shot blasted 60mm

thick with grade of concrete M200 pnumatic

compressed by mechanically pressed and as

per approved design including 75mm Sand

layer for levelling and filling the joint with

sand in proper line and level etc. including

laying in design and pattern as provided by

the EIC using pavers of different color, shade

and texture and as per sample approved.

Filling in foundation and plinthwith brick Bats

15 Chhara in layers of 20cm. thickness including 149.00 CMT 600.56

watering, remming and consolidating

Design and supply of garden furniture

including Benches, Play Equipments,

16 Dustbins only after the approval and complete

satisfaction of engineer in charge.

16.1 ROTO MINICURVE SLIDE 3 Nos 38050.74

16.2 FRP MINI WAVE SLIDE 3 Nos 21918.01

16.3 TODDLER SWING-triple 3 Nos 26656.93

16.4 JUMBO SPRING RIDER/mini swing 2 Nos 14216.76

16.5 TINY SEE SAW 1 Nos 13032.03

16.6 FOUR SEATER MGR 1 Nos 41465.55

16.7 Hanging Curve 1 Nos 56867.04

Construction Dom/Gazebo upto 6.0 mt dia,

mt height at ground level in ferro cement

structure in accordance to the drawings and

architect's design intent. Rate shall be for a

complete item including all necessary material

such as but not limited to cement, sand, steel,

chicken mesh, weld mesh etc. complete

including necessary labour work such as

binding, welding casting etc. all complete with

requisite scaffolding etc. complete in

accordance to the instruction of architect

and/or engineer - in - charge. The structural

base such as column and foundation for the

dome shall be paid in relevant tender item.

The item shall be measured and paid for a unit

of one sqm of actual area installed with

thickness up to 150 mm. In case of a hollow

structure / shape being formed with ferro

cement than the visible exterior surface area

shall be measured and paid for.

50,000 LL GSR -Rectangular slab Type with

19 Double Side 6 seater Bench 5 Nos 9999.00

20 3 seater Wooden Concrete Bench 5 Nos 5858.00

21 3 seater Ms bench Type-1 5 Nos 9595.00

22 3 seater Ms bench type-2 5 Nos 6161.00

Providing layingand jointing intrue line and

level 15mmdia.U.P.V.C.Pipe(SCH-40) for cold

water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every twometre

C/C or shall be concealedas directed including

necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive

solvent, including cost of all

Providing layingand jointing intrue line and

level 25mmdia.U.P.V.C.Pipe(SCH-40) for cold

water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every twometre

C/C or shall be concealedas directed including

necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive

solvent, including cost of all

Providing layingand jointing intrue line and

level 40mmdia.U.P.V.C.Pipe(SCH-40) for cold

water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every twometre

C/C or shall be concealedas directed including

necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive

solvent, including cost of all

Providing layingand jointing intrue line and

level 50mmdia.U.P.V.C.Pipe(SCH-40) for cold

water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the

26 wall with the help of clamp at every twometre 50.00 RMT 195.67

C/C or shall be concealedas directed including

necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing and fixing Gunmetal check or non-

return fullway wheel valve.(A) 15mm dia.

Providing and fixing Gunmetal check or non-

return fullway wheel valve.(C) 25 mm dia.

Providing and fixing Gunmetal check or non-

return fullway wheel valve.(E) 40 mm dia.

Providing and fixing ball cock of approved.

quality as directed.(B) Abonite (ii) 50mm dia.

31 5 Hp sebmerssible pump with All asseceries 1.00 Nos 30300.00

Grasscutting machine Black+Decker 1600W

Electric Lawn Mower BEMW471BH-B1

Filling in foundation and plinth with murrum

33 or selected soil in layers of 20cm. thickness 1824.00 CMT 289.07

including watering, ramming and

consolidating etc. complete.

Providing and laying Parking tiles flooring

over 20mm(Average thick base of cement

mortar 1:6 (1-cement:6-coarses and)laid over

and jointed with grey cement slurry mixed 64.00 SMT 873.65

with pigment to match the shade of including

rubbing and polishing etc. complete. (A)

Storm Water Drain Pipe :-Providing and

supplying & Laying ISI Standard R.C.C.

pipes(of Sulphate Resistig Cement) in standard

lengths of following class and diameter

suitable for either collar joints or rubber ring

joints including all taxes, insurance,

transportation, freight charges, octroi,

inspection charges, loading, unloading,

conveyance to departmental stores, stacking

Providing laying Controlled cement concrete

M-250 and curing complete including the cost

of form work and excluding cost of 3.00 CMT 6578.13

reinforcement for reinforced concrete work in

36 :RCC Slabs & Landings

RCC precast M.H. Frame & Cover

Manufacture, supply & Delivery at store or at

site of work precast RCC M.200 Frame & cover

suitable to Storm Water drainage M.H. and as 10.00 Nos 2294.00

per type design & Drawing including cost of

reinforcement M.S.Angles or Flat, curing mold

37 work etcSize 50 cm x 50 cm

SANAND NAGARPALIKA

NAME OF PROJECT :-GARDEN DEVELOPMENT AT TP NO-5 FP NO-578 IN SANAND NAGARPALIKA

Sub Estimate 04 - MIYAWAKI & LANDSCAPPING

Sr No Description QTY UNIT RATE AMOUNT

Construction bed for plantation with miyawaki

method, including all materials, labours

and equipments. materials as per engineer in

Preparation of beds for hedging and shrubbery by

excavating 60 cm deep and trenching the excavated

base to a further depth of 30cm, refilling the excavated

earth after breaking clods and mixing with sludge or

manure in the ratio of 8:1(8 parts of stacked volume of

earth after reduction by 20%:one part of stacked

volume of sludge or manure after reduction by 8%),

flooding with water, filling with earth if necessary,

wateringand finally fine dressing, leveling etc.

including stacking and disposal of materials declared

unserviceable and surplus earth by spreading and

leveling as directed,withina leadof 50m, lift upto 1.5m

complete (cost of sludge,manureor extra earth to be

paid for separately)

2 Supplying and stackingof well decayed cattle manure at

site including royalty and carriage upto 5k.m. lead

complete (Cattle manure measure dinstac ks will

reduced by8% for Payment).

3 Plantation of Trees, Shrubs, and Hedge at site i/c

watering and removal of unserveiceable material’s as

per direction of officer incharge (excluding cast of plant

TREE PLANTATION

4 Providing & planting new plant by Miyawaki

method (fromList) including making trench,

perforator, fertilizer,water retainer,mulching,

planting etc completeas per directed

Digging holes in ordinary soil and refilling the same

with the excavated earth mixed with manure or sludge

in the ratio of 2:1 by volume (2parts of stacked volume

of earth after reduction by 20%:1 part of stacked

volume of manure after reduction by8%)flooding with 925.00 Nos 44.19

water, dressing including removal of rubbish

andsurplusearth, ifany,withall leads and lifts (cost of

manure, sludge or extra good earth if needed to be paid

for separately)

5 Supply of various Tree

5.1 Trees layer upto 18'

Ficus benjamina 12.00 Nos 1818

Terminalia arjuna 12.00 Nos 3535

Ficus religiosa 12.00 Nos 3535

Albizia lebbeck 11.00 Nos 2020

Tectona grandis 12.00 Nos 1111

Mimusops elengi (Maulsri) 12.00 Nos 3535

Delonix regia (Gulmohar) 12.00 Nos 3434

5.2 Trees layer upto 15'

Tamarindus indica 15.00 Nos 808

Azadirachta indica 15.00 Nos 1767.5

Phyllanthus emblica 16.00 Nos 1212

Adansonia digitata 16.00 Nos 9595

Alstonia scholaris 16.00 Nos 1818

Polyalthia longifolia 16.00 Nos 2222

Putranjiva roxburghii 16.00 Nos 2424

5.3 Trees layer upto 10'

Cassia fistula (Amaltash) 40.00 Nos 1212

Tecoma gaudichaudi 42.00 Nos 909

Nyctanthes arbor-tristis(Har singar) 40.00 Nos 353.5

5.4 Trees layer upto 9' to 6'

Caesalpinia pulcherrim 150.00 Nos 252.5

Impatiens 150.00 Nos 227.25

Passiflora caerulea (Rakhi bel) 150.00 Nos 176.75

Mangifera indica 150.00 Nos 328.25

as perv attached Quaotation

6 Grassing with selection No. 1 Doob grass including

watering and maintenance of the lawn for 30 days or

more till the grass forms a thick lawn, free from weeds

and fit for mowing including supplying good earth, if

needed (the grass and good earth shall be paid for

Supplying Grass on Site as per selection of

Engineer in Charge

SANAND NAGARPALIKA

NAME OF PROJECT :-GARDEN DEVELOPMENT AT TP NO-5 FP NO-578 IN SANAND NAGARPALIKA

Sub Estimate 05 - COMPOUND WALL

Sr No Description QTY UNIT incl. LC AMOUNT

Demolition of Brick work and stone masonry

including stacking of serviceable materilas and

1 disposal of unserviceable materials with all lead and 46.00 Nos 550.40

lift.(ii) In Cement Mortar.

Removing and scraping of old deteriorated plaster of

any thickness frommwall / R.C.C member including

2 stacking of serviceable material and disposal of 52.01 SMT 19.58

unserviceable from site of work with all lead and lift

Dismentling steel work including distempering and

stacking the materials with all lead and lift.

Boring holes 3.5 m deep in ordinary soil (for cast in

situ piles )and getting out the soil and disposal of the

4 surplus excavated soil as directed with in a lead of 50 85.00 Nos 1524.09

Meter for following diameter of pipes.(iii) 300 mm

Excavation for foundation up to 1.5mt. depth

including sorting out and stacking of useful materials

5 and disposing of the excavated stuff up to 50 meter 59.00 CMT 117.08

lead. (A) loose soil

Filling available excavated earth (excluding rock) in

trenches, plinth, sides of foundations etc. in layers

6 not exceeding 20cm in depth consolidating each 55.00 CMT 130.40

deposited layer by ramming & watering.

Providing and laying cement concrete 1:3:6 (1

Cement: 3 Coarse Sand: 6 hand broken stone

aggregates 40 mm nominal size) and finishing smooth

7 with curing complete excluding the cost of formwork 16.00 CMT 4046.22

and excluding the cost of reinforcement. In

foundation and plinth.(upto 10 ton).

Providing and laying controlled cement concrete M-

250 and finishing smooth with curing etc complete

including the cost of providing formwork with

ordinary timber planking but excluding the cost of

reinforcement for foundations, footings, bases of

column etc. & mass concrete at all heights, all places,

all levels within the site premises as directed by the

Engineer - in - Charge.

Providing and laying controlled cement concrete M-

250 and finishing smooth with curing etc complete

including the cost of providing formwork with

9 sheeting of steel sheets but excluding the cost of 10.00 CMT 8650.65

reinforcement for columns, pillars, posts, struts, walls

etc. at all heights, all places, all levels within the site

premises as directed by the Engineer - in - Charge.

Providing and laying controlled cement concrete M-

250 and finishing smooth with curing etc complete

including the cost of providing formwork with

sheeting of steel sheets but excluding cost of

10 reinforcement for sides and soffits of beams, beam 47.00 CMT 6660.95

haunchings, cantiliesrs, copings and lintets not

exceeding 1 m in depth etc. at all heights, all places,

all levels within the site premises as directed by the

Engineer - in - Charge.

Brick work using common burnt clay building bricks

having crushing strength not less than 35kg/Sqcm. in

Super Structure. In cement mortar 1:6 (1 cement :

fine sand) (A) Fly Ash

Providing and applying average 15 mm. thick Cement

finished cement plaster in single coat on fair side of

brick, concrete walls for interior plastering for all

floors, at any height and finished even and smooth in

CM 1:4. (1 cement : 4 coarse river sand), including

dense hacking to concrete surface (minimum

hacks of 10-15mm depth per sq.ft), scaffolding,

12 curing, making grooves (at junction of slab & beam, 272.00 SMT 157.17

two different materials like brick & concrete surfaces,

periphery of openings, below sills, above lintels,

above skirting - horizontally or vertically), forming

pattas including applying neat cement slurry on RCC

Surface etc. complete as per drawing / specifications

and / or as directed by the Engineer-in-charge. for all

civil, plumbing, electrical & infrastructure works.

20 mm. thick sand face Gutkha finish cement plaster

on walls upto 10 meters above ground level

13 consisting of 12 mm. thick backing coat of C.M. 1:3 (1 377.00 SMT 300.66

cement : 3 sand) and 8 mm. thick finishing coat of

C.M. 1:1 (1 cement : 1 sand) etc. complete

Finishing wall with weather proof exterior emulsion

paint on wall surface (two coats) to give an required

shape even shade after thoroughly brushing the

surface to remove all dirt, and remains of loose

powdered materials.etc complete. The rate shall be

14 including of providing two coats of primer of 649.00 SMT 114.54

approved brand and manufacturer on new wall

surfaces to give and even shade including throughly

brushing the surface free from mortar dropping and

other foreign matter and sand papered smooth.

Providing TMT Fe 500 bar reinforcement for R.C.C.

work including bending, binding and placing in

position complete up to floor two level. (upto

Providing, fabricating, assembling, hoisting / erecting

and fixing in position at all heights/all levels/all

floors/all shapes & sizes with all leads & lifts using MS

Rolled Steel Sections, Hollow sections, Tubular

Sections, MS Plates, Chequered Plates etc. all

confirming to latest relevant IS codes for the work of

steel structures (staircases, canopy and similar),

railings, handrail, jali, gates, grills, bracings,

platforms, brackets, monkey ladder, cattle trap,

insert plates, windows, false ceiling frame work,

fencing posts & fencing jali frame work etc. including

straightening, cutting, bending, bolting and welding

the members all as per structural drawings and as per

detailed specifications (for materials & workmanship)

including necessary scaffolding / staging, anchor

fasteners etc. complete in the situations described

hereinafter and comprising of : i) Profile Cutting of

components to required lengths/widths and

shapes/profiles; ii) Smooth grinding / machining of

edges / faces / all welding joints; iii) Necessary

welding (electric arc welding) for required weld

lengths and sizes iv) The fabrication work shall start

only after approval of the fabrication drawings. Any

change required in the fabrication drawings shall be

carried out at no extra cost. Fabrication shall be in a

perfect Architectural workmanship manner and as

provided in Section V & VI of IS 800 & IS 7215. v)

Welding shall be carried out by qualified welders.

vi)Electrodes for welding, the procedure, selection,

test and inspection shall confirm to provisions in IS

816, IS 818, IS 822, & IS 823. vii)Erection / hoisting

shall commence only after approval of fabricated

parts by the Engineer in charge.viii) Necessary

arrangements of templates to keep the foundation

bolts in position, shall be made by contractor without

any extra cost. ix.) The rate shall include for applying

two coats of approved make and shade synthetic

enamel paint over two coat of zinc chromate yellow

oxide as primer, as per instructions.A) Rolled

Sections, Hollow Sections (RHS/SHS/Tube), MS

Plates, MS Insert Plates and embedments,

Foundation Bolts etc. all

Providing and fixing, chain link fencing of 50 x 50 x

g G.I. chain link, width of the fabric shall be as per

drawing with G.I. tension wire at top and bottom, 8 g

and with necessary accessories like nut & bolt etc.

complete. Including the cost of 2 coats of zinc

17 chromate (yellow) and 2 coats of best quality enamel 288.00 SMT 481.77

paint as approved by Architect and Engineer-in-

charge. Cost of vertical post and necessary fixing

arrangement to M.S. post by M.S. flat, Cement

concrete (1:2:4) and shuttering shall be paid

separately as per relevant tender item.

Providing and laying and fixing 25 mm thick

expansion joint by hydro cell semi rigid UV

18 resistance with high performance laminated closed 13.50 SMT 745.52

cell polythene foamjoint filler in sheet foamas

directed, etc. complete

19 MS gate With Pergola as per design 1.00 Nos 124416.85

SANAND NAGARPALIKA

NAME OF PROJECT :-GARDEN DEVELOPMENT AT TP NO-5 FP NO-578 IN SANAND NAGARPALIKA

DOCUMENT: RATE ANALYSIS_AMC OF LANDSCAPING WORKS

No QTY UNIT incl. LC AMOUNT

Maintenance of Tress & Palm

Maintaining the trees by regular watering, weeding, gap filling, proper

staking, removal of unwanted shoots or branches, Manuring (twice a

year, 4 kg Farm yard Manure/ year/Tree) and application of DAP

fertilizer @150 gm/tree/year, shaping pest control and disposing the

garden waste as directed, the shrubs and ground covers by regular

watering, gap filling, forking (quarterly), training and pruning as

required, manuring (twice a year, 5 kg Farm Yard Manure/year/Sq.

mt.) ) and application of DAP fertilizer @150 gm/tree/year, pest

control, weeding, etc so as to keep them in desired condition all the

time, the lawn by regular watering, manuring (twice a year, 5 kg

warm culture manure or castor cake/year/Sq. mt.) and application of

DAP fertilizer @150 gm/tree/year, mowing/pruning (as & when

required) and also providing two persons (watchman/gardener) for

daily basis (working time 5:00am to 11:00pm) so as to keep the garden

in desired condition all the time. All garden inputs, tools, implements

etc. have to be provided by the contractor.

For cleaning and security, provide 1 watch man each in 3 shift (per

shift 8 Hr) & 2 cleaners each in 2 shifts and maintain entire garden and

systems (Civil, electro-mech etc)

Maintenance of Tress & Palm

Maintaining the trees by regular watering, weeding, gap filling, proper

staking, removal of unwanted shoots or branches, Manuring (twice a

year, 4 kg Farm yard Manure/ year/Tree) and application of DAP

fertilizer @150 gm/tree/year, shaping pest control and disposing the

garden waste as directed, the shrubs and ground covers by regular

watering, gap filling, forking (quarterly), training and pruning as

required, manuring (twice a year, 5 kg Farm Yard Manure/year/Sq.

mt.) ) and application of DAP fertilizer @150 gm/tree/year, pest

control, weeding, etc so as to keep them in desired condition all the

AM.2 48.00 months 75168.24

time, the lawn by regular watering, manuring (twice a year, 5 kg

warm culture manure or castor cake/year/Sq. mt.) and application of

DAP fertilizer @150 gm/tree/year, mowing/pruning (as & when

required) and also providing two persons (watchman/gardener) for

daily basis (working time 5:00am to 11:00pm) so as to keep the garden

in desired condition all the time. All garden inputs, tools, implements

etc. have to be provided by the contractor.

For cleaning and security, provide 1 watch man each in 3 shift (per

shift 8 Hr) & 2 cleaners each in 2 shifts and maintain entire garden and

systems (Civil, electro-mech etc)

TOTAL FOR 5 YEARS (12+48=60 Months)