Const. of New Judicial Court Complex, Shahabad District Kurukshetra (Pdg. 250 KVA Elect. Sub Station) (Recall).

Amount

( c )Moulded case Circuit breakers. Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections. 15 amp.to 60 amp. 415 V ,10 KA 3-phase. HSR No. 31.12 c (i)

100 amp.to 220 amp.415 V,10 KA 3-phase. HSR No. 31.12 c (ii)

250 amp. To 300 amp. 415 V , 35 KA 3-phase. HSR No. 31.12 c (iii)

300 amp. to 400 amp. 415 V , 35 KA 3-phase. HSR No. 31.12 c (iv)

(P) Pipe Laying. Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. Galvanised iron pipe 65 mm dia on flushed. HSR No. 31.21 (xiv)

Supply and erection of PVC pipe of 6 kg. pressure laid 1 metre below ground level complete including digging refilling of the trench with jointing etc. PVC pipe 120 mm dia. HSR No. 31.21(xxx) (a)

PVC pipe 80 mm dia. HSR No. 31.21(xxx) (b)

(Q) Earthing Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required . HSR No. 31.22(i)

Extra for using salt and charcoal / coke for pipe earth electrode as required. HSR No. 31.22(ii)

Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as equired. HSR No. 31.22(iii)

Earthing with tinned copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) comlete as equired. HSR No. 31.22(iv)

Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode. HSR No. 31.22(v)

Pdg. and fixing 25 mm x 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required . HSR No. 31.22(x)

Pdg. and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required with all labour and material. HSR No. 31.22(xiv)

Pdg. and fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode as required . HSR No. 31.22(xi)

Pdg. and fixing 25 mm x 5 mm G.I. Strip on surface or in recess for connections etc. as required with all labour and material. HSR No. 31.22(xv)

Supply and erection of 20 mm x 3 mm thick G.I. tape fixed with suitable G.I. stapples of same size. HSR No. 31.22(xix)

Pdg. and fixing 4.00 mm dia G.I.wire on surface or in recess for loop earthing as required . HSR No. 31.22(xvi)

Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections . 25 Sq. mm 3.5 Core Cable . HSR No. 31.26 (xxv) Ard.

35 Sq. mm 3.5 Core Cable . HSR No. 31.26 (xxvi) Ard.

50 Sq. mm 3.5 Core Cable . HSR No. 31.26 (xxvii) Ard.

95 Sq. mm 3.5 Core Cable . HSR No. 31.26 (xxix) Ard.

120 Sq. mm 3.5 Core Cable . HSR No. 31.26 (xxx) Ard.

240 Sq. mm 3.5 Core Cable . HSR No. 31.26 (xxxiii) Ard.

Supply and erection of suitable compression type brass cable glands for underground Cable. 25 Sqmm to 50 Sqmm Cable 2 to 4 Core. HSR No. 31.28 (iii)

70 Sqmm to 95 Sqmm Cable 3 to 3.5 Core . HSR No. 31.28(iv)

120 Sqmm to 185 Sqmm Cable 3 to 3.5 Core HSR No. 31.28 (v)

240 Sqmm Cable 3 to 3.5 Core . HSR No. 31.28 (vi)

( T ) Street Light. Supply and erection of prestressed cement concrete pole as per IS : 1678-1960. 9 metres long 105 mm x 115 mm at top and 105 mm x 315 mm at bottom with working load of 200 Kg. burried 1.80 m in ground. HSR No. 31.30 (VI) (ii)

(X) Miscellaneous . Supply and erection of aluminium lugs heavy duty including crimping etc. upto the entire satisfaction of the Engineer-in-charge of the work. 35 sqmm . HSR No. 31.35 (ix) (f)

50 sqmm . HSR No. 31.35 (ix) (g)

95 sqmm . HSR No. 31.35 (ix) (I)

120 sqmm . HSR No. 31.35 (ix) (j)

240 sqmm . HSR No. 31.35 (iX) (m)

Supply and erection of cable route marker made of 50 cm long 10 mm dia M.S.rod welded / revitted at the top with 10 cm. Dia 5 mm thick G.I.plate inscribed with `cable' world on it , having a cross arm 30 cm. long of the same dia welded at the bottom , in existing trench 45 cm. below ground level . HSR No. 31.35 (xi)

Supply, Installation, Testing and Commissioning of Wall/ free standing flooor mounting dust & vermin proof compartmentalized cubical panel made out of 2 mm thick CRCA sheet, required hardware 3 mm thick bakelite sheet provided all along the bus bar and cable alley separating switches compartment and supporting suitable channel duly painted by 2 coat of Zinc/Red oxide primer followed by 2 coats of powder coating in grey or required shade after rinsing. The panel having PU/Neoprene rubber gasket of not less than 3 mm thicness seperate detacable gland plate MS base channel hinged door with inter locking arrangement for equipment/switch wear. Transparent acrylic sheet shall be provided in front of bus bar compartment to prevent direct access to bus bar bakelite sheet 3 mm thick for separately cable alley to BBC from switch chamber Extended solid copper bars up to cable cable alleys shall be provided for outgoing connection which shall be paid as extra items. Side walls and cable alley compartments shall be having bolted type doors withdetachable extension type structure. The panel will be complete with control wirring (copper) and fuse protection.(only outer area on all sides shall be measured) HSR No. 31.63

Supply and fixing of copper bus bar duly tinned by means of SMC/DMC type insulator high tensile nuts and bolts spring washers fixing to same in existing panel including bending, cutting in required shape and size and insulation with colour coding heat shrinkable PVC insulation complete in all respect. HSR No. 31.64

Supply and fixing of rotary handle for on / off operation of existing MCCB in the LT panel including fixing the same in position with all labour and material required to complete the job in all respect. Rotary handle upto 125 A, MCCB HSR No. 31.66 (i)

Rotary handle above 125 A, MCCB HSR No. (ii)

S/E of mark double walled corrugated (DWC) HDPE pipe laid 1 Mtr. Below ground level including diging and refilling of earth including cost of suitable size socket cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to entire satisfaction of Engineer- incharge of the work. HDPE Pipe 145/123 outer dia / inner dia. HSR No. 31.67 (iii)

Supply & erection of Module case circuit breaker single pole / 4 pole on wall/ on existing pedestal including bounding to earth and making necessary connection required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of work. 4 pole MCCB 300 amp to 400 amp HSR No. 31.69 vii

S/E of XLPE (E)11 KV HT aluminum conductor armoured cable ISI mark laid in existing pipe /trenches/surface with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. 50 sqmm 3 core XLPE Cable HSR No. 31.71 ii)

Supply and erection of heat shrinkage type end termination jointing kit indoor type of suitable to accommodate 3 core 11 KV XLPE aluminum cable/ ABC cable complete with all the kit contents including earth continuing connection along with 3 nos. crimpling type aluminum lugs of suitable capacity including making joining etc complete in all respect. Suitable for 16 to 50 sqmm 3 core XLPE Cable HSR No. 31.72 i

Supply and erection of heat shrinkage type end termination jointing kit outdoor type of suitable to accommodate 3 core 11 KV XLPE aluminum cable/ ABC cable complete with all the kit contents including earth continuing connection along with 3 nos. crimpling type aluminum lugs of suitable capacity including making joining etc complete in all respect. Suitable for 16 to 50 sqmm 3 core XLPE Cable HSR No. 31.73 i

SITC of 250 KVA, Outdoor type, oil cooled Transformer, 11/0.433 KV, Copper Wound with Off Circuit Tap Changer as per IS 1180, Level-2, CG Makecomplete in all respect upto the entire satisfaction fo Engineer- in Charge of work. Make -Alstom, Bharat Bijlee, Kirloskar, Crompton, Voltamp, ABB, Siemens, Schneider. Rating -250 KVA No Load Voltage Ratio (KV) -11/0.433KV No. of Phase 3 Frequency Cycle 50Hz Type - Oil Cooled Type Cooling ONAN Connection -HV/LV -Delta / Star Vector Group - Dyn -11/IS : 1180 Level 2 Tapings on HV Compensation: +5% to -5% In steps of 2.5% Tempearture Rise ( Winding ) Ambient : Not Exceeding 90Deg C. " OFF Circuit" Tap Changer Altitude upto 1000M above M.S.L Externally Hand Operated Oil Conservator with filling hole & cap plain oil level gauge with min. level marking thermometer pocket 4 Nos. Plain roller Uni- directional Silica Gel Breather 1st filling of oil Drain Cum Filter Valve Rating & Diagram Plate Two Earthing Terminals Lifting Arrangement Explosion vent Air Release Plug Oil Temp. indicator with alarm and trip indicator Double Float Buchloz Relay & Conservator Shut Off valve between Buchloz Relay & Conservator Winding Temp. indicator with alarm & trip contact Complete in all respect NS-1

S/E of 11KV gang operated switch Rashtriya / Jayshree / BHEL make conforming to IS with latest amendment including suitable size of copper blade erection of same on the existing 'H'pole with the help of 3 Nos. channels of size 75mmx40mmx6mm, 1.8M long fixed with suitable size of MS clamp, nuts and bolts including cost of 6 Nos. 11KV insulator with GI pin, RD fuses and painting with 2 coat of approved paint and one coat of red oxide material required to complete the job in all respect up to entire satisfaction of the Engineer-in-Charge of the works. NS-2

S/E of lighting arrestor model ALPRO / Alastom/ LEMCO make suitable for 11KV 3 Phase 50 HZ ground neutral system comprising of spare gape type queen gap type in series with non linger resistar element house in Horizontally scale poreclam bushing with line and ground terminal along with mounting clamps conforming to ISS 3070 (Part-I) of 1985 with latest amendment with all labour and material required to the complete in all respect up to entire satisfaction of the Engineer-in-Charge of the works. NS-3

Supply of 11KV Pin Insulator Brown colour with 11KV Gi Pin Jay Shree make with Disc fitting T&C type complete in all respect with erection of the same upto the entire satisfaction of the Engineer in Charge of work NS-4

S/E of Rubber mat of size 2mX1m & 12 mm thick suitable for 11 KV complete in all res. NS-5

Supply, Commissioning , Testing of Stey Set complete with stey wire & disc insulator as per specification complete in all respect upto the entire satisfaction of Engineer -in - charge of work. NS-6

SITC of LT Capacitor Bank Panel 95 KVAR capacity compete in all respect upto the entire satisfaction of engineer-in charge of work. Incomer side MCCB 250 A 3P =1No. ROH=1No. SPREADER LINKS =1No. APFC RELAY =1No. MCB SP 2/6A =3Nos. Control Terminal =8Nos. 10 KVAR CAPACITOR FEEDER MCB 32 A TP CAP DUTY =2Nos. CONTACTOR CAP.DUTY. 10 KVAR =2Nos. PUSH BOTTEN =4Nos. ON INDICATION =2Nos. AUTO-MANUAL SWITCH =2Nos. 6 Amp Control MCB SP =2Nos. 15 KVAR CAPACITOR FEEDER MCB 32 A TP CAP DUTY =1No. CONTACTOR CAP.DUTY. 15 KVAR =1No. PUSH BOTTEN =2No. ON INDICATION =1No. AUTO-MANUAL SWITCH =2Nos. 6 Amp Control MCB SP =2Nos. 20 KVAR CAPACITOR FEEDER MCB 63 A TP CAP DUTY =3No. CONTACTOR CAP.DUTY. 20 KVAR = 3Nos. PUSH BOTTEN =6Nos. ON INDICATION =3Nos. AUTO-MANUAL SWITCH =3Nos. 6 Amp Control MCB SP =3Nos. BUS BAR (B) Bus Bar will be of Electrolytic COPPER of size:250A ENCLOSURER ( C) CRCA sheet steel enclosure. Panel will be fabricated with 14SWG CRCA sheet steel for load bearing surfaces and 16SWG for non load bearing surfaces. Tentative Dimensions - 650 X 1900 X 500 MM WIRING (D) Harness for starter & metering, Thimbles, Ferrules, Sleeves, PVC channel, Gourmets, Braided wire for earthing etc HARDWARE (E) (Nuts, Bolts, Spring washers, Door hinges, Door Locks & Key, Lifting hocks, Base channel, C-type Channels, DMC Busbar Insulators etc) ACCESSORIES (F) Danger plate, Feeder detail Inscription plates, Acrylic/Bakelite/Perforated sheet cover for busbar, Door gasket etc. NS-7

Supply & Erection MS bucket stand which including cost of 6 nos. buckets of 9 liter capacity with sand filling including cost of welding & painting of complete stand & buckets with one coat of red oxide and two coats of approved paint of red colour with all labour & petty material to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of work. NS-8

S/E of fire extinguiher ISI marked ABC type 6 kg. capacity powder base with square grip gavle duly erected/hung on wall with hook including the cost of hook, screw etc. with all the all labour and material required to the complete in all respect up to entire satisfaction of the Engineer-in-Charge of the works. (make- Safex/Ceasefire/Minimax) NS-9

Supply , Erection , testing & comissioning of 11 KV outdoor type HT Metering panel complete with CTs , PTs cubical and electronics Meter with accuracy class 0.5 as per requirement / approved by UHBVN. Panchkula Electrical Supply consisting of following : i) Cubical panel free standing floor mounting type made of sheet steel 14 G SWG CRCA sheet with channel iron base frame spray painted with strong synthetic grey channel paint as per size & design approved by UHBVN. PANCHKULA Electrical Supply.Out door Type with outer canopy. ii) 3 nos. 11 KV CTs of rating as approved by UHBVN Panchkula. Chandigarh Electrical Supply for indoor installation of appr.make of UHBVN Panchkula Electrical Supply. iii) 1 no. 11 KV PTs 11000/110 volts 10 VA burden 0.5 accuracy oil filled suitable for indoor installation of approved make of UHBVN Panchkula Electrical Supply . iv) Digital electronics meter 3 Phase 4 wire 11000 / 110 volts 10 VA burden 0.5 accuracy for recording reading of KWH of make and rating approved by UHBVN Panchkula Elect.Supply with push button display operating system for diff. kind of readings . v) Foundation of Suitable Size 300mm above ground level made of CC having suitable size to hold metering panel vi) Outer housing fab by 2mm thick CRCA sheet to cover the HT Metering Panel from rain water alongwith agnle iron frame. vii) The cubical panel will be complete in all respect including interconnections , internal wiring with PVC copper cable its testing / approval of all items by UHBVN Panchkula Electrical Supply with a gurantee of one year from the date of commissioning including cost of all labour & material required to complete the job in all respect upto entire satisfaction of Engineer-in-charge of work.. NS-10

Supply and erection of MS angle 50x50x6mm including cutting bending to the required shape drilling hole carriage Painting loading unloading complete in all respect upto the entire satisfaction of Engineer-in-charge of work. NS-11

Supply and erection of MS flat 50x6mm including cutting bending to the required shape drilling hole carriage Painting loading unloading complete in all respect upto the entire satisfaction of Engineer-in-charge of work NS-12

Supply and erection of MS channel 100x50x6mm including cutting bending to the required shape drilling hole carriage Painting loading unloading complete in all respect upto the entire satisfaction of Engineer-in-charge of work. NS-13

Pdg. & Fixing of Wire Mesh Jali around the Transformer of size 4' x 8' made out of 75 x 25x 3.25 mm Jali fixed with angle iron frame made out of MS Angle 50 x 50 x 6 mm support of MS flat 50 x 6 mm and fixed in CC block 1:2:4 incliding cutting, welding etc. as per drawing complete in all respect upto the entire satisfaction of the Engineer - in - charge. NS-14

Const. of Foundation with Cement Concrete & Bricks for 250 KVA Elect. Sub Station (L.S.) NS-15

M/S PANJETA ELECTRICALS

GARG ELECTRIC STORE

J V ELECTRICALS