Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.1 LAccepted-AOC | L1 | Accepted-AOC Being the First Lowest | |
| 2 | L2₹37.6 L+₹3.9 L (11.4%)Rejected-Finance DEVERTHA NO 1 SHAHGANJ AGRA | AGRA | AGRA | UTTAR PRADESH | L2 | Rejected-Finance Other Than L1 |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
31 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Kota
Dadwara Complex, Military Station Kota - 324002
REPAIR TO JOINERY AND CONNECTED WORK IN MD ACCN AND OTM ACCN IN SOUTHERN SECTOR UNDER AGE B/R-II AT MIL STN KOTA
2022_MES_543279_1
8647/E8
Open Tender
Civil Works
Item Rate
183 days
KOTA
Contractor shall be enlisted with MES in Class D and above and category a(i) subject to satisfactory remarks wrt performance in respect of works in hand as reflected in Work Load Return (WLR) or any other report circulated by competent engineer a
8 documents required · 8 mandatory
₹500
GE KOTA
₹70,000
Yes
26 Nov 2022
4 Aug 2022
7 Sept 2022
4 Aug 2022
31 Aug 2022
19 Aug 2022
4 Aug 2022 - 13 Aug 2022
Amount
Taking down cement plaster any description/thickness on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.
Taking down chowkhat or frames not exc 1.50 Sqm each with shutters (without taking off shutters from the frame), complete all as specified and directed.
Taking down chowkhat or frames exc 1.50 Sqm and not exc 4.00 Sqm each with shutters (without taking off shutters from the frame), complete all as specified and directed.
Taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each, complete all as specified and directed.
Taking down shutters of any description exc 1 Sqm & n. exc 2 Sqm each and refixing in same after easing and adjusting including renewal of screws etc complete all as specified and directed.
Taking down aluminium door/window shutters (with frame), carrying out minor repairs/adjustment including rubber beading, aluminium beads, cleats etc and refixing in same position, complete all as specified and directed.
Taking down aluminium ventilator shutters (with frame), carrying out minor repairs/adjustment including rubber beading, aluminium beads, cleats etc and refixing in same position, complete all as specified and directed.
S&F in replacement top rail/bottom rail/lock rail/stiles of aluminium door/window shutter, repair/adjustment including necessary materials such as aluminium sections of required size, cleats, rubber beading, handles etc including taking down and refixing of shutters, complete all as specified and directed.
M&L Providing cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.
S&F in renewal of 18/19 mm thick block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face fixed with screws and 6mm thick teak wood beading provided on exposed edges complete all as specified and directed.
S&F in renewal of Powder coated (thickness of powder coating minimum 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
S&F Powder coated (thickness of powder coating minimum 50 micron) anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.
All as per item No 12 (here-in-before) but sliding type door shutter, complete all as specified and directed.
S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.
S&F Powder coated (thickness of powder coating minimum 50 micron) anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No) hinges type B-21 100mm long (2 No.) suitable handle (1 No), complete all as specified and directed.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.
S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in- charge.
S & F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing as applicable to item 08095 given in SSR Part – II (2020).
S & F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppy and fixing in the frame at site complete all as per specifications and drawings as applicable to item 08080 given in SSR Part–II.
S&F in renewal of 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cup boards, rebated or flat edged complete all as specified and directed.
M&L for 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed.
S&F 35mm thick factory made IInd Class Hard wood panelled door shutters two panel with lock rail and panel of 9mm B.W.P. marine grade plywood bonded with high quality liquid phenol formaldehyde synthetic resin adhesive conforming to IS-710 or 12mm thick particle board veneered with commercial veneering on both faces. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed.
S&F 35mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401. (Note :- S & F Glass/gauge shall be measured and paid for separately)
S&F auto close hinges, stainless steel, bright finish or electro galvanised, complete all as specified and directed.
S&F continuous piano hinges, mild steel bright finish or electro galvanised, 40 mm width of flaps when open, complete all as specified and directed.
S&F in renewal of hydraulic door closer hydraulically regulated, aluminium die cast body, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm width and weight between 61 to 80 Kg and fixed, complete all as specified and directed.
S&F in renewal of double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed.
S&F in renewal of mortice lock, made of brass, vertical type, size 100 mm, mild steel, 2 levers complete all as specified and directed.
S&F mortice lock, made of brass, vertical type, size 75 mm, mild steel, 4 levers complete all as specified and directed.
S&F 125 mm Hasp and staple, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed.
S&F 300 mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed.
S&F in renewal of 300 mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed.
S&F 200 mm aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.
S&F 150 mm aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.
S&F in renewal of 200 mm aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.
S&F 100 mm size mild steel butt hinges, medium weight, cold rolled and fixed with screws, complete all as specified and directed.
S&F in renewal of 100 mm size mild steel butt hinges, medium weight, cold rolled and fixed with screws, complete all as specified and directed.
S&F 150 mm size aluminium handles, cast type, anodised, complete all as specified and directed.
S&F 125 mm size aluminium handles, cast type, anodised, complete all as specified and directed.
S&F in renewal of 125 mm size aluminium handles, cast type, anodised, complete all as specified and directed.
Supply only stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm, complete all as specified and directed. (Note: cost of fixing of wire cloth shall be deemed included in the unit rates under respective items.)
S&F in renewal of stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples, complete all as specified and directed.
S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor, overall length of cover plate 150 mm, complete all as specified and directed.
S&F in renewal of floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor, overall length of cover plate 150 mm, complete all as specified and directed.
S&F in renewal of factory made steel windows conforming to IS-1038 with side hung shutters made of box type section & including box type hinges, with 2 Nos steel handles, 2 Nos tower bolts & steel pag stay complete (with glazing bars), dovetailed or welded & including fixing of lugs in PCC 1:2:4, type B-1, using 20mm graded stone aggregate & making good walls & cills to match the existing and including one coat of red oxide/ zinc chrome primer complete all as specified and directed. Note :- Glass shall be measured and paid for sepparately under respective items.
S&F in renewal of factory made steel windows conforming to IS-1038 with side hung shutters made of box type section & including box type hinges, with 2 Nos steel handles, 2 Nos tower bolts & steel pag stay complete (without glazing bars), dovetailed or welded including fixing of lugs in PCC 1:2:4, type B-1, using 20mm graded stone aggregate & making good walls & cills to match the existing and including one coat of red oxide/ zinc chrome primer complete all as specified and directed. Note :- SS or MS cloth wire shall be measured and paid for sepparately under respective items.
S&F in renewal of factory made steel ventilators with top hung shutters including projecting type hinges with steel handle and steel peg stay, complete without glazing bars, including one shop coat of zinc chromate primer, complete all as specified and directed. Note :- Glass/SS or MS cloth wire shall be measured and paid for sepparately under respective items.
S&F mild steel framed work as in grills, grating etc. with end of bars shouldered and/or riveted, or forged into spikes: framed guard bars: barred iron doors: ladders: frame balusters: walk ways: railing: frame work of water tanks and similar works conforming to Fe-290 Grade-E-165, complete all as specified and directed.
M&L mild steel framed work as in doors or gates of angles or other section with gusset plates, rails braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with including either hooks and hinges or steel hanging door fittings (excluding of steel sheeting or other covering running rails and guides) and hanging also fastening and fixing, conforming to Fe 410-W (Gde-E- 250) quality-A, complete all as specified and directed.
M&L for 15 mm thick rendering on fair faces of brick work or stone masonry surfaces in Cm 1:4 using water proofing compound as per manufacturer's instruction's, finishing surfaces even and smooth without using extra cement complete all as specified and directed. ( Note: Water proofing compound shall be measured and paid separately.)
M&L for 15 mm thick rendering on other than fair faces of brick work or stone masonry surfaces in Cm 1:4 finishing surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of new surfaces of walls and applying two coats of distemper oil emulsion over and including a coat of chalk whitening complete all as specified and directed.
M&L for preparation of new surfaces of walls and applying two coats of cement base paint over and including a coat of primer complete all as specified and directed.
M & L for preparation of new or previously untreated wooden surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer, complete all as specified and directed.
M & L for preparation of new or previously untreated steel surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer all as specified and directed.
M & L for preparation of new or previously untreated steel surfaces not exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer all as specified and directed.
Hacking out old broken glass (any thickness size, quality or description) from wooden frames or stone concrete or brick surrounds, glazing with putty or fixed with beads, complete all as specified and directed.
Supply only 5.5mm thick sheet glass ordinary quality, cut to size as required at site, complete all as specified and directed. (Cost of fixing of glass shall be deemed included in the unit rates under respective items.)
S&F sheet glass 3 mm thick ordinary quality and glazing with oil putty etc in squares n.exe 0.50 Sqm in each pane, complete all as specified and directed.
S&F figured/pin head glass 3mm thick ordinary quality and glazing with oil putty in squares n.exe 0.50 Sqm in each pane, complete all as specified and directed.
S&F 150 mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed.
S&F in renewal of stainless steel fancy type tubular curtain rods, 25 mm dia, with fixing brackets and one pair of decorative end caps etc, complete all as specified and directed.
S&F in renewal of glass shelf assembly of 6 mm thick glass, 12 cm wide and 60 cm long and CP guards of approved quality and fixed to wall with CP brass screws etc, complete all as specified and directed.
M/S Solanki Brothers
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .