WELCOME MAINT OF MD ACCN AND ALLIED WORKS UNDER AGE B/R -I OF GE (WEST) BAREILLY.

Amount

Taking down Chowkats or frames with shutters (Without taking off shutters from the frames) not exceeding 1.5 Sqm each including iron mongries, hold fast etc and including making good disturbed portions of walls in CM 1:4 complete all as specified and directed.

Taking down Chowkats or frames with shutters (Without taking off shutters from the frames) exceeding 1.5 sqm but not exceeding 4.0 Sqm each including iron mongries, hold fast etc and including making good disturbed portions of walls in Cm 1:4 complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm and refixing in same opening after resecuring or easing or ruffling etc each complete all as specified and directed.

S&F 125mmx60mmx1.25mm thick pressed steel, frames for door with one or more rebates including filling and compaction with PCC (1:3:6) Type C-1 using 20 mm graded stone aggregate, necessary fixing lugs, hinges, lock strike plate, etc, complete including wooden texture finished paint on the frame surface complete all as specified and directed

S&F 105mmx60mmx1.25mm thick pressed steel, frames for door with one or more rebates including filling and compaction with PCC (1:3:6) Type C-1 using 20 mm graded stone aggregate, necessary fixing lugs, hinges, lock strike plate, etc, including wooden texture finished paint on the frame surface complete all as specified and directed.

S&F in repairs factory made PVC cupboards frame of the size 75 mm x 40 mm with a wall thicknesss of 5 mm made out of extruded 5mm thick plain/prelam PVC sheet of density 600kg/cbm, having bottom width of 50mm and thickness of 10 mm. All four frame lengths reinforced with 19 mm x 19mm M.S.square tubes of 19 quage thickness throughout the frame and mitre cut at two corners adjointed with 2 nos of 15mm long brackets of 15 mm x 15 mm M.S. square tubes. the door frame shall be fixed to the wall using 8/100 long MS screw through the frame by using PVC fastners. A minimum of 4 nos of screws to be provided for each vertical members and minimum of 2 nos of screw to be provided horizontal members etc. complete as per direction of Engr-in-charge, manufacturer's specification and drawing.

S&F in repair factory made PVC cupboards flush type shutter of 30 mm thick consisting of frame made out M S tubes of 19 guage thickness and size 19mm x 19 mm for stiles and rails. The inside panels shall consist of 20 mm thick multichamber hollow PVC section of 1mm wall thickness, bonded using solvent cement / cynoacrylate adhesive with 5mm thick plain/prelam PVC sheet, on both sides of inside panels including necessary item to fix the shutters to frame such as 100 mm stainless steel hinges (06 Nos Each Shutter), 100 mm long handles(02Nos Each Shutter)150mm long barrel tower (02Nos Each Shutter), made of anodised aluminium and magnetic ball catch(01 Nos Each Shutter), for each pair of shutters. all four edges of the panels to be sealed with lipping of 10 mm thick and 20 mm wide PVC sheet baton( made by sticking 2nos PVC foam sheet of 5mm thickness using PVC solvent cement adhesive) complete as per direction of Engr-in- charge

S&F in repair factory made PVC shelf/partition of required size consisting of panel of Min 20 mm thick WPC Plain/Color and for supporting the hold of shelf/Partition and shall provided 3 gdges in size 18 mmx18 mm as per required lenght. The front side of the edge visible in the front of the shelf/partition to be edge lipped by 18 mmwidthx1 mm thick PVC sheet using solvent cement etc reqired length. complete all as specified and directed

S&F aluminium anodised 125 mm Hasp and staple, safety type,brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F of flat iron bands, straps, supports, clamps, hold fasts, wall ties, hooks for hanging fans and other similar small steel article confirming to Fe-290 Grade E-165 with and including necessary nut-bolts, washers, screws etc. as required complete all as specified and directed.

S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S & F 30 mm thick flush door shutter solid core construction with block board core and plywood face panels commercial type on both side complete all as specified and directed.

S& F 35 mm Plain framed, panelled shutter with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S & F in repair rubber gasket door seal 50mm wide 3 mm thick of approved quality fixed to door complete all as specified and directed.

S & F 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., with, edges of framing with plain, chamfered or rounded, mitred and rebated sash bars, any numbers for securing glass etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) fitted to chowkhats complete all as specified and directed.

M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm coloured PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

M & L Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F in repair steel windows with pressed steel frame side hung shutter including box type hinges with steel handle and steel peg stay with glazed openable shutter with glazing bar ( open out side ) and wire gauged openable shutter without glazing bar ( open inside ) dovetailed or welded complete all as specified and all as per DRG No TD/088 dt 07 Jan 2002 Note :- (i) Two shutters ie wire guaged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unit (II) rate for filling PCC in frame deemed to be included in quoted rates (iii) MS grill,glass and wire mesh shall be measured and paid seperatly under relevant item of schedule

S&F in repair steel ventilator with top hang shutters with pressed steel frames including hinges, steel peg stay in repairs complete all as specified and directed.

Supply & fixed in repairs, PVC kitchen frame of section 18x75mm made out of 18mm thick PVC Ply sheet of pleasing colours, print and prelam finishes one side as approved

Supply & fixed in repairs, PVC kitchen shutter made out of 18mm thick PVC Ply sheet of pleasing colours, print and prelam finishes one side as approved and kitchen shutters shall be fixed to the PVC kitchen frame with & including auto hinges, steel screws continous hinges and modular handels complete all as specified and directed.

S & F of 125 mm long Aluminium alloy handles, cast type, anodised complete all as specified and directed.

S & F of 150 mm long Aluminium anodised barrel tower bolts of extruded sections complete all as specified and directed.

S & F 100 mm long medium weight, cold rolled mild steel Butt hinges with screws complete all as specified and directed.

S & F 75 mm long medium weight, stainless steel Butt hinges with screws complete all as specified and directed.

S&F 200mm long mild steel barrel tower bolts, stove enamelled black, with bright bolts complete all as specified and directed.

S & F mild steel sliding door bolts, bolt type, stove enamelled black, with bright bolt not less than 12 mm dia with and minimum of 6 bolts and nuts, four on bolt plateand two on staple plate length of bolt 300mm ISI marked complete all as specified and directed.

S & F mild steel pressed handle, oval type, stove enamelled black size of handle 125mm ISI marked complete all as specified and directed.

S&F mild steel 300 mm long ordinary rat rail rod pattern helical door springs, incl roller and roller plate complete all as specified and directed.

S & F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width or aperture 1.18mm and fixed with tinned tacks or galvanised wire staples all as specified or as directed.

S & F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width or aperture 1.18mm and fixed with tinned tacks or galvanised wire staples all as specified or as directed.

M&L for Plain Cement Concrete Type C1 1:3:6 (using 20 mm graded stone aggregate) as in holdfast and similar work etc complete all as specified and directed.

S & F sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads in squares not exc. 0.50 sqm in each pane including hacking out old broken glass any thickness, glazed, quality or description from wooden/steel frames or stones, concrete or brick surrounds glazing with putty or fixed with beads all as specified or as directed.

S & F sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads in squares not exc. 0.50 sqm in each pane all as specified or as directed.

S & F Figured glass, 4.0 mm thick, ordinary quality and glazing with oil putty or wooden beads exceeding 0.5 Sqm in each pane glazed with putty or fixed with beads complete all as specified and directed.

S & F Mild steel work in framed work such as grills, gratings,framed guard bars, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe.290.Gde-E-165 complete all as specified and directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75 mm thick cement concrete, type C 2, 1:3:6 (using 40 mm graded stone aggregate) as in plinth protection and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M & L plain cement concrete type C2 1:3:6 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in 1:6 cement mortar including demolition of old brick work complete all specified and directed.

M & L for rendering 15 mm thick on fair face of brick work or concrete surfaces in cement mortar (1:4) finished the surface even and smooth without using extra cement complete all as spd and directed

M & L for rendering 15 mm thick on other than fair face of brick work or concrete surfaces in cement mortar (1:6) finished the surface even and smooth without using extra cement complete all as spd and directed

M & L for rendering 15 mm thick on brick work or concrete surfaces in cement mortar (1:4) finished the surface even and smooth without using extra cement including taking down plaster from wall including raking out joints, hacking for keys and scrubbing down with water etc complete all as spd and directed

M & L for rendering 15 mm thick on brick work or concrete surfaces in cement mortar (1:6) finished the surface even and smooth without using extra cement including taking down plaster from wall including raking out joints, hacking for keys and scrubbing down with water etc complete all as spd and directed

M&L for rendering 10 mm thick on concrete surfaces like ceiling, chajja etc in cement mortar 1:3 and finished even and smooth without using extra cement including taking down plaster from ceiling including raking out joints, hacking for keys and scrubbing down with water etc complete all as specified and directed

M & L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of priming plastered and other surfaces with alkali resistant priming paint complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying two coats of cement based paint complete all as specified and directed.

M&L for preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.

M & L for machine cut kota stone slab flooring 20-25 mm thick over and including 15mm cement screed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified and directed.

M&L for 15 to 18mm thick granite (of any type and shade) work (table rubbed and polished) in floors, steps, jambs, pillars, window cills, cooking plateforms and like in CM 1:4 incl pointing in white cement(1:2) using marble dust with admixture of pigment to match the shade of granite stone including grinding and polishing, moulding of edges complete over and incl 15 mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete complete all as spd and directed

M&L for 15 to 18mm thick green marble (of any type and shade) work (table rubbed and polished) in floors, steps, jambs, pillars, window cills, cooking platforms and like in CM 1:4 incl pointing in white cement(1:2) using marble dust with admixture of pigment to match the shade of granite stone including grinding and polishing, moulding of edges complete over and incl 15 mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete complete all as spd and directed

M & L for non- skid ceremic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick cement screed in 1:6 including dismantling of old existing floor tiling complete all as specified or as directed.

M & L for non- skid ceremic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick cement screed in 1:6 including dismantling of old existing floor tiling complete all as specified or as directed.

M & L for glazed ceremic coloured tiles in vertical surface 300 x 200 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering in cement mortar 1:4 including dismantling of old existing wall tiling all as specified or as directed.

M & L for glazed ceremic coloured tiles in vertical surface 450 x 300 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering in cement mortar 1:4 including dismantling of old existing wall tiling all as specified or as directed.

M&L for Vitrified tiles (light shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in walls or cladding or in skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick rendering in CM 1:4 including dismantling of old existing wall tiling complete all as specified and as directed by Engineer-in-Charge.

M&L for Vitrified tiles (light shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and incl 20mm thick screed bed in cm 1:6 including dismantling of old existing floor tiling complete all as specified and as directed by Engineer-in-Charge.

S & F coloured Chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick, bedded over and including screed bed 20mm thick in CM 1:6 set and jointed in neat cement slurry and pointed with white cement and pigment including dismantling of unserviceable concrete tile complete all as specified and directed.

M&L 4 mm thick E-Board classic (everest or equivalent) tiles for insulation and accoustic purpose 60x60 cm in size fixed with and including aluminium anodised snap grid with 25 x25x 1.5 mm thick Tee section and 38x25x2 mm thick angle with hanging/supporting arrangements as in false ceiling including dismantling of old ceiling boards (fibre, pulp, insulation, etc) and making good disturbed surfaces complete all as specified and directed.

Dismantling water tanks and removing to store capacity exc 250 and not exc. 500 litres complete all as specified and directed.

S&F 500 ltrs capacity rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

S&F in repairs 15 mm Nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm-45gms /25mm- 65gms)

S&F in repairs 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms complete all as specified or as directed.

S&F in repairs Plastic Cover tanks for PVC Tanks quality and colour as approved by Engineer-in-Charge complete all as specified and directed

Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes etc capacity exc. 250 Litre and not exc. 500 Litre complete all as specified and directed.

S&F in repair 20mm bore dia brass gate valve with cast iron crutch complete all as specified and directed

Refixing of 15 mm old steel tubing and connection in new or old position to wall,floors or ceiling including taking up or down 15 mm dia steel tubing and connections all as specified or as directed.

Refixing of 20mm old steel tubing and connection in new or old position to wall,floors or ceiling including taking up or down 15 mm dia steel tubing and connections all as specified or as directed.

S&F for 15mm bore galvanised steel water tubing with all fittings 'medium grade' and fixed complete to wall and ceiling or laid in floors including taking up or down 15 mm dia steel tubing and connections complete all as specified or as directed.

S&F for 20mm bore galvanised steel water tubing with all fittings 'medium grade' and fixed complete to wall and ceiling or laid in floors including taking up or down 20 mm dia steel tubing and connections complete all as specified or as directed.

S&F in repair PVC connection 15mm dia size with PTMT nuts of length 450mm complete all as specified or as directed.

S & F in repair CP grating size 100/125 mm fixed with white cement complete all as specified or as directed.

S & F in repair chromium plated shower rose with or without swivel joints and Shower arm any size, including fixing to steel pipe or union size 125 mm complete all as specified or as directed.

S & F in repair vitreous china wash basin white flat back or angle back type of size 580mm x 450 mm with CP waste fitting and PVC waste pipe , complete all as specified or as directed.

S & F in repair Swivel shower( including arm ) of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) complete all as specified or as directed.

S&F in repairs 15 mm Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as specified and directed.

S&F in repairs Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm-125gms). complete all as specified and directed.

S&F in repairs 15 mm Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms) complete all as specified and directed.

S& F in repair 15mm bore dia (long/short body) Bib taps fancy type , cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair 15mm bore dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair 15mm bore dia Stop valves with long shank and cup (concealed type) fancy type, cast copper alloy chromium plated screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified and directed.

S&F in repair 15mm bore dia chromium plated pillar cock swan neck type complete all as specified and directed.

S&F in repair 15mm bore dia Stop valves/angle valves fancy type, cast copper alloy chromium plated screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified and directed.

S&F in repair 15mm bore dia chromium plated 2 way angle cock with flange complete all as specified and directed.

S&F in repair 15 mm dia brass chromium plated single lever basin mixer without popup waste system with 450mm long braided hoses & base flange complete all as specified and as directed.

S&F in repair 15 mm dia brass chromium plated single lever wall mixer (including L bend) ,connecting ,legs & wall flanges complete all as specified and as directed.

S&F for in repair C P Wall mixer with provision for overheadshower with 115 mm long bend pipe on upperside connecting legs and flags.complete all as specified and as directed Make: (Jaquar, cat No- QQP 7273PM or Cera Cat No F1003402 or Kajaria Cat No KB111018 )

S&F in repair C P Sink mixer with short Swinging spout with connecting Lehs and wall flanges .complete all as specified and as directed Make Jaquar, cat No- QQP 7307PM or Cera Cat No F1016501 or Kajaria Cat No KB3111024

S & F in repair sink made of stainless steel 1 mm thick kitchen with plug, washers and waste, including bedding in cement mortar on to ddwarf wall or including fixinf cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F in repair sink with drainage board made of stainless steel 1 mm thick kitchen with plug, washers and waste, including bedding in cement mortar on to ddwarf wall or including fixinf cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410 mm x 330 mm x 160 mmm complete all as specified and directed.

S&F in repairs solid pvc waste pipe 32mm dia 80 cm long complete all as specified and directed.

S&F in repair stainless steel plate rack of size 750mmx900mmx250mm weighing 4.5 kg complete all as specified and directed.

S&F in repair stainless steel towel rail complete all as specified and directed.

S&F in repair stainless steel soap dish complete all as specified and directed.

S&F in repair CP health fauchet with 1.5 m tube & hook complete all as specified and directed.

S&F in repair for vitreous china squatting pan 'Orissa' pattern of size 580mm x 440mm white with integral foot rest with 'P' or 'S' trap, front or back inlet and connection to trap with cement mortar etc complete all as specified or as directed..

S&F in repair for PVC low level flushing cistern 10 Ltrs capacity with all internal accessories and fixed to wall including provision of PVC connection pipe 15mm bore with brass union and jam nuts on both sides, PVC flush pipe 32mm dia 90cm long fixed properly to inlet of WC etc complete all as specified or as directed..

S & F in repairs vitreous china wash down water closet pan (pedestal pattern ) white (excluding fixing bolts flushing cistern and flush pipe) incl seat cover with complete fittings, complete all as specified and directed.

S&F in repairs Seat cover for EWC with brackets for fixing in seat complete all as specified and directed.

S&F in repairs to CP Brass jet spray for EWC complete all as spd and directed.

S&F in repairs 25 mm dia Stainless Steel fancy type drapery curtain rod with brackets and lattu & other connected accessories etc complete all as specified and directed.

S & F PVC (SWR) 110 mm dia soil waste or rainwater drainage pipes single socketed in any length with rubber ring joint laid in floor or fixed on wall including taking up or down AC/PVC rain water pipe, soil/waste/vent pipe of any size with fittings etc all as specified or as directed.

S & F PVC (SWR) 75 mm dia soil waste or rainwater drainage pipes single socketed in any length with rubber ring joint laid in floor or fixed on wall including taking up or down AC/PVC rain water pipe, soil/waste/vent pipe of any size with fittings etc all as specified or as directed.

S & F PVC (SWR) 110 mm bore bends all as specified or as directed.

S & F PVC (SWR) 75 mm bore bends all as specified or as directed.

S & F PVC (SWR) junction single,75 mm (Single T) equal or unequal complete all as specified or as directed.

S & F PVC (SWR) junction single,100 mm (Single T) equal or unequal complete all as specified or as directed.

S&F in repair PVC Nahani trap with grating 110mm x 75mm or as per site requirement complete all as specified and directed

M & L for painting to new wood and wood based surfaces of any description exc. 10 cm width or girth with two coats of synthetic enamel paint over a coat of pink primer including prepration of new or previously untreated surfaces all as specified or as directed.

M&L for preparation of new steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparation of Old plastered or unplastered surfaces of walls including brooming down or steel wire brushing scrapping down smoke roof, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of white wash complete all as specified and directed.

M&L for preparation of Old plastered or unplastered surfaces of walls including brooming down or steel wire brushing scrapping down smoke roof, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying two coat of white wash complete all as specified and directed.

M&L for preparation of Old plastered or unplastered surfaces of ceiling including brooming down or steel wire brushing scrapping down smoke roof, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of white wash complete all as specified and directed.

M&L for two coats of birla white putty or JK wall putty avg 2mm thick with smooth finish by sand papering to achieve smooth surfaces complete all as specified and directed.

M&L for preparation of old distempered surface of walls by brushing, scrapping down smoke soot mouldsby steel wire brush.including filling depression surfaces with putty and applying one coat of distemper oil emulsion distemper Complete all as specified.

M&L for preparing of old distempered surface of walls by brushing, scrapping down smoke soot mouldsby steel wire brush including filling dipression surfaces with putty and applying two coats of distemper oil emulsion Complete all as specified.

M&L for preparing of old distempered surface of ceiling by brushing, scrapping down smoke soot moulds by steel wire brush including filling dipression surfaces with putty and applying one coat of oil bound distemper Complete all as specified.

M&L for preparation of old decorated surfaces of walls by brushing, scrapping down smoke soot mouldsby steel wire brush including filling dipression surfaces with putty and applying one coat of cement base paint .complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls by brushing, scrapping down smoke soot mouldsby steel wire brush including filling dipression surfaces with putty and applying two coat of cement base paint .complete all as specified and directed.

M&L for applying two coat of cement base paint on AC sheet/Allahabad tiles in roofing including preparation of surfaces by brooming or steel wire brushing scrapping down smoke soot,moulds, moss and effloroscent salts treating oily and greasy spots including cornices etc complete all as spd and directed. (Note -Bldg height is Aprrox up to 11 m, Cost of Necessary scafolding shall be deemed to be included in the quoted rates )

M&L for applying two coat of exterior emulsion paint on AC sheet/Allahabad tiles in roofing including preparation of surfaces by brooming or steel wire brushing scrapping down smoke soot,moulds, moss and effloroscent salts treating oily and greasy spots including cornices etc complete all as spd and directed. (Note -Bldg height is Aprrox up to 11 m, Cost of Necessary scafolding shall be deemed to be included in the quoted rates )

M&L for preparation of old surfaces of interlocking /Chequered tiles /concrete surfaces of path/Hard standing/Road Kerbs etc including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efforescent salts and trading oil and greasy spots etc and applying one coat of external weather proof paint complete all as specified and directed.

M&L for complete removal of existing surfaces of walls including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by skilled labour complete all as directed.

M&L for Removing old paint by paint removers or burning off by blow lamps and cleaning with scrapers, any number of coats, any width or girth complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description and applying one coat of synthetic enamel paint complete all as spd and directed by Engr-in-Charge

M&L for preparation of old painted steel surfaces of any description and applying one coat of synthetic enamel paint complete all as spd and directed by Engr-in-Charge

M&L for preparation of old painted wooden surfaces of any description and applying two coat of synthetic enamel paint complete all as spd and directed by Engr-in-Charge

M&L for preparation of old painted steel surfaces of any description and applying two coat of synthetic enamel paint complete all as spd and directed by Engr-in-Charge

Notes:- Tenderers may note that amount as given in schedule of credit will be deducted from the total amount to worked out the net contract sum at the time of Acceptance of tender.

JAI SRI RAM ASSOCIATE (BID ID -3359870)

SURYA CONSTRUCTION (BID ID -3359702)

M/S Ishwar Builder (BID ID -3351769)

RIYASAT ALI KHAN (BID ID -3358341)

Bidder Name

JAI SRI RAM ASSOCIATE