Office workstation painting work and other misc work at cabin No 1127 1128 AND 1130 of 11th floor of shakti bhawan extn building lko

Amount

Laying and Jointing PVC Pipe. Heading

Scrapping old white or colour wash or distemper including disposal of refuse as directed by the Engineer-I/C within a distance of 60 M.

Applying BIRLA PUTTY or equivalent putty on previousaly birla putty smoothen surface over one cost of water base cement primer of ICI or equivalent brand for smoothining and leveling of the surface as per requirement and direction of E/I including cost of all material , labour and T&P required for proper completion of worK.

Painting one coat with Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint (Paint and water in the ratio 1:1 by volume) over prepared and primed surface of cement concrete, cement plaster and bricks including all labour, material and T&P etc required for proper completion of the work, (preparation of base with Birla putty etc. and a coating of primer shall be paid extra).

Same as above in item no. 03 but for every coat after first coat of Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint.

Painting or varnishing new iron work in small areas or new wood work with one coat of ready mixed priming paint and one coat of approved superior quality ready mix paint "Luxol" or equivalent brand or varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should conform to the I.S. 103-1950

As in item 05 above but for every coat after first coat.

Spirit polish over new wood work after rubbing down the surface, with sand paper to give smooth and shining surface including cost of all materials, labour, T&P required for proper completion of the work.

Supply and fixing of 32 mm thick single leaf flush door shutter ( boiled water resistance, phenol maldehide resin bonded, hot pressed factory made) commercial quality to I.S.2202 part-1 (1983) ISI marked including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges,bolts.locks,handles, springs and other fittings but excluding their supply including all materials, labour & T&P etc. required for proper completion of work.

Supply and fixing brass polished hydraulic door closure of approved make & quality its fixing and adjustment with the help of screws, nuts and bolts including supply of all labour, T & P etc. required for proper completion of the work.

Supply and fixing brass polished godrej mortise lock of approved make & quality its fixing and adjustment with the help of screws, nuts and bolts including supply of all labour, T & P etc. required for proper completion of the work.

Providing & Making & Fixing of Wall Panneling as per drawing frame work to be covered with 12 mm thick plywood from the help of fevicol,nails and screw. then making grooves with 6mm MDF Ply with the help of fevicol,nails and screw. The final surface to be finished with 1mm thick laminate and grooves to polished as per design.. as per requirement and direction of Engineer I/C including cost of all material, labour, T & P etc required for proper completion of work.

Providing and fixing in place a full height storage cabinet 600 mm deep made with 19 mm thick ISI marked ply borad, all interior surfaces to finished with pasting of 0.8 mm thick mica and all exterior surfaces to be finshed with pasting of 1 mm thick mica of texture and colour as approved by Engineer in Charge including all labour, T&P, other items like (but not limited to) fevicol, nails screws, higes, sliders,door handles, multipurpose lock of godrej or equivalent rate etc. required for proper completion of works, to be measured interms of front area only.

Providing & fixing of Excutive office computer work station cum work table in room no- 1127 of Shakti Bhawan Extn. Building. The Unit shall be of size 0.9X0.60 mtr worktop & 0.76 mtr hight. The Entire Above Unit Shall be Fabricatrd with 19 mm Block Board Superior Quality Swastik Made all Extirior surface with approved Quality 1 mm sunmica laminate and intirior faces finished with 10x20 mm thick sprit polish teak wood beading.t.One no drawer nd one flap door fabricated with the help of 19 mm block board Swastik Block board /green or equivalen The cup-board shall have lockable magnet door fabricated with 19mm block board fixed to cup-board with magnet and having in handle The main table rack shall be approved matel handle and necessery m.p lock. all drawrs shall be provided with approved qaulity slider machnism. The foot board shall be also provided in above three peace. Excutive work station .The work include cost of all labour,material T&P required for proper completion of work.

Repairing of wooden cabinet door fitted at cabin no-1127, 1128 and 1130 of S.B. Extn building lko .Door made with 19 mm swastik board then proper fiinsh with the help of 1mm thick laminate after then one no lock and one no handle fitted in cupboard ,The work include cost of all labour,material T&P required for proper completion of work.

Supply and Fixing of 8 mm Table top Glass with edge polish all respect as approved by E/I.

Supply of mar keen cloth for binding file required for proper completion of the work.

Supply of labor for binding file and sifting file and furniture required for proper completion of the work.

Existing old damage Tile nad Fixing New false ceiling with 12mm thick Arm strong Fire resistant gyp board false ceiling system of approved type fixed to a Withrequired hanger Including supply of all materials, labour and T & P etc required for proper completion of work.

P/F fully Anodized aluminium fixed glazing with HINDALCO or equivalent extruded standard sections14gauge (2.41mm thick) of various cross sections and joints mitred and jointed as shown in drawing including providing & fixing 5.5 mm thick toughened glass with Neoprene beading & aluminium glazing clips all around. The minimum thickness of anodizing on all aluminium sections should be 20 microns with a (+) 2 microns tolerance . The rate should include the cost of fixing the aluminum frame on Teak wood frame or finished wall (RB/RCC/Masonry) surface by means of 80 mm long approved counter sunk screws provided at 500 mm c/c or part there of starting from 100 mm above the bottom in vertical member and 100 mm from both the ends of horizontal top and bottom member excluding cost of Teak frame but including cost of all other material, labour, tools & plants etc. complete.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.5 mm thickness

Providing & fixing of Excutive office computer work station cum work table in room no- 1127 AND 1128 of Shakti Bhawan Extn. Building. The Unit shall be of size 1.2X0.7 mtr worktop & 0.76 mtr hight. The Entire Above Unit Shall be Fabricatrd with 19 mm Block Board Superior Quality Swastik Made all Extirior surface with approved Quality 1 mm sunmica laminate and intirior faces finished with 10x20 mm thick sprit polish teak wood beading.t.one no drawer nd one flap door fabricated with the help of19 mm block board Swastik Block board /green or equivalen The cup-board shall have lockable magnet door fabricated with 19mm block board fixed to cup-board with magnet and having in handle The main table rack shall be approved matel handle and necessery m.p lock. all drawrs shall be provided with approved qaulity slider machnism. The foot board shall be also provided in above three peace. Excutive work station .The work include cost of all labour,material T&P required for proper completion of work.

Providing & Fixing of Roller Blinds of approved shade as per drawing & specification as approved by the Architect/ Engineer -in-Charge.

Repairing of of Executive office computer work station cum work table of size1500x900x750 in room no-1127 OF Shakti Bhawan Extn. Building. Top surface finished with approved Quality 1 mm sunmica laminate and intirior faces finished with 10x20 mm thick sprit polish teak wood beading. . one number lockable drawersone lockable cupboard 400mm wide finished with1 mm sunmica laminate f .one no lock and one no handle fitted in drawer and cupboard . & back side covered. .The work include cost of all labour,material T&P required for proper completion of work.

M/S KALPANAM CONCEPTS

M/S OM SERVICES