PROVISION OF SEWAGE LINE AND SEPTIC TANK IN P-134, P-137 AND P-138 AT NAUSENA BAGH AND SPECIAL REPAIR TO SEWAGE LINE AND SEPTIC TANK BEHIND 100 MEN BLOCK AND DSC BLOCK AT NAVAL BASE UNDER GE NAVY PORBANDAR

Amount

Excavation over areas, n. exc 1.5 m in deep and getting out in hard dense soil complete all as specified and as directed.

Excavation over areas, n. exc 1.5 m in deep and getting out in soft / disintegrated rock complete all as specified and as directed.

Excavation in trenches n.exc 1.5 m wide and n.exc 3.0 m in depth for foundation etc n. exc 10 sqm on plan and getting out in Soft/disintegrated rock complete as specified and directed.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation etc n. exc 10 sqm on plan and getting out in hard dense soil complete as specified and directed.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation etc and getting out in Soft/disintegrated rock complete as specified and directed.

PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in foundations and mass concrete complete all as specified and directed.

Cement concrete 1:3:6, type C-2 using 40mm graded crushed stone aggregate as in concrete bed to drain pipes 150 mm internal dia including packing under the pipe after they are laid tested, complete all as specified and as directed.

Reinforced concrete pipes class NP2 of size 150mm bore, laid and jointed complete with collars complete as specified and directed.

Cement concrete 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cill, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating and similar work including use & waste of necessary form work complete all as specified and directed.

Stone masonry walling or squared walling in cm 1:4, brought upto courses using dressed same size Porbandar stone of superior quality complete all as specified and directed.

Precast reinforced cement concrete M-30, using 20mm graded crushed stone aggregate as in baffle wall including use & waste of form work for fair finished surfaces complete all as specified and directed.

RCC 1:1.5:3, using 20 mm graded stone aggregate as in lintel including necessary use and waste of formwork for fair finished surface of concrete complete as specified and directed.

Precast reinforced cement concrete M-30, using 20mm graded stone aggregate as in cover slab for manholes etc surfaces finished even and smooth complete all as specified and directed.

Use and waste of Form work to sides and soffits of suspended slabs such as roof slabs, floor slabs and similar work n exc 200 mm thick (horizontal or sloping) complete all as specified and directed.

Pre-cast RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in cover slab of manholes, septic tanks, etc. and set in cement mortar 1:6 including dismantling of damaged RCC covers slab complete all as specified and as directed. NOTE : Reinforcement will be measured and paid for separately under relevant Item(s).

Bands straps supports or stays for rainwater ventilation pipes including bolts if required hooks(stay) heavy for large gates hook and pintle hinges large hasps and staples chins hand made sliding bolts clamps hold fasts wall ties hooks for hanging fans plain angle cleats for securing purlins to wood trusses or rafters knee piece inserts two way and three way straps plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

Precast reinforced cement concrete 1:2:4 type B-1, using 20mm graded stone aggregate as in window or door cills, bressummers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weathering's, throating etc. and setting in mortar complete with joints to match including use & waste of form work for fair finished surfaces complete all as specified and directed.

Rendering 15mm thick on concrete work in CM 1:4 finished the surfaces even and smooth using WPC @ 3% of cement (water proofing compound shall be measured & paid separately) complete all as specified and as directed.

Supply only integral water proofing compound complete as specified and directed.

Mild steel CRS bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Mild steel CRS bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

100mm bore vent cowl complete all as specified and directed.

100mm bore AC pipe complete all as specified and directed.

Removing of excavated mtrls exc 250 m but n.exc 500 m and depositing where directed at a level n.exc 1.5 m above the starting point complete as specified.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exc. 25 cm deep as in hard / dense soil complete as specified.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exc. 25 cm deep as in soft/disintegrated rock complete as specified.

Demolition / breaking up drain pipes (Salt glazed stone ware) 150mm bore jointed in cement mortar of any description including PCC bed complete all as specified and directed.

Removing excavated material any type of soil to distance not exc 50 m and depositing where directed at a level not exc 1.5m above the starting point,complete all as specified and directed.

Removing excavated material soft/disintegrated rock to distance not exc 50 m and depositing where directed at a level not exc 1.5m above the starting point,complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate as in foundations, filling and mass concrete or as in sub base complete all as specified and directed.

Demolition of brickwork or stone/boulders/block masonry, built in cement mortar including all quoins, arches, pillars, ashlar facing, dressed stonework, precast concrete artilcles and precast concrete block walling complete all as specified and directed.

Rendering 15 mm thick in cement mortar 1:6 on stone masonry surfaces or surfaces other than fair faces of brick work, rendering finished even and smooth (without using extra cement) complete all as specified and directed.

Cutting into existing sewage line manholes for connecting new drains of any dia of pipe and making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or ¾ section) in cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate finished smooth and reforming benching as required for 150mm dia.complete all as specified.

Dismantling of cast iron drain pipes 100mm bore with fittings jointed in cement mortar from trenches complete all as specified and directed.

Cast iron soil 100mm bore, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and as directed. Note :Excavation & earth work will be measured and paid for separately under relevant Item(s).

Cast iron soil 100mm bore, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls complete all as specified and as directed.

100mm bore CI bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

100mm bore CI Bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access doors all as specified and as directed.(large bore measurement) complete all as specified and as directed.

CI Branch pieces, single (equal or unequal) 100mm bore, ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

100mm bore cost iron cowl complete all as specified and as directed.

PVC (SWR) pipes, 110mm bore, single socketed, 4.00 Kgf per Sqcm pressure, in any length with rubber ring joints fixed in repair / replacement complete all as specified and as directed.

110mm bore PVC (SWR) bends, single / double 'Y' or 'T', with access doors, any radius including fixing clips fixed in repair / replacement complete all as specified and as directed.

PVC (SWR) branch piece, single (single Y), equal or unequal 110mm dia with rubber ring joints, fixed in repair / replacement complete all as specified and directed.

Stack clamps for 110mm bore pipes of any description, made out of 50 mm x 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, fixed in repair / replacement complete all as specified and directed.

Hard core of broken stone or boulders of guage nexc.63 mm, deposited, spread and levelled in layeres n exc. 150 mm thick, watered and rammed to a true surface, before concerting or otherwise complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise described for of any description complete all as specified.

MS framed work such as grills, gratings, etc with ends of bars shoulders or riveted or forged in to spikes, framed guard bars , rungs ,screen and similar work conforming to Fe 410-0 or Fe 310-0, complete all as specified and as directed.

JAY BHARAT METAL SUPPLIERS

shree chamunda enterprise