Annual maintenance of internal roads in SV Vedic university for the year 2026 27

Demolition including stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead BRICK WORK

Demolition including stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead Un reinforced Cement Concrete up to 15Cms thick

Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all Operational, incidengal, labour charges such as shoring, sheeting, planking,strutting etc., complete for finished item of work Ordinary soil-Manual means upto 3m depth

Filling of foundations and basement with best river sand in layers of not more than 15cms, thick each well watered to saturation and consolidated including cost and conveyance of all materials, incidental charges etc., complete

Cement Concrete (1:4:8) using 40 mm ( 0..54 Cum), 20mm (0.27 Cum) and 12 mm (0.90 Cum) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cms thick well compacted including curing, ,machine mixing,cost and conveyance of all materials etc., complete.

Cement Concrete C.C(1:3:6)- Grade M15 using 20 mm ( 0.54 cu.m) and 12 mm (0.36cu.m) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cm thick well compacted including curing, ,machine mixing, cost and conveyance of all materials etc., complete. Note: Measurement boxes shall be used for measuring the quantities of cement, aggregate and water required for the given concrete mix.

Construction of Brick Masonry in CM (1:6) using well burnt Bricks 2nd class or ground moulded (Non modular or traditional size) (230 x 110 x 70 mm) including curing, cost and conveyance of all materials as directed during execution and complying with standard specifications etc., complete.

Construction of 110 mm thick brick partition walls in CM (1:4) using well burnt Bricks 2nd class or ground moulded ( Non- modular or traditional size) bricks ( 230 x 110 x 70 mm) including curing, cost and conveyance of all materials etc., complete

Plastering in Cement Mortar using best river sand including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete.

-do- in C.M(1:3) 12 mm thick

-do- in C.M(1:5) 12 mm thick

-do- in C.M(1:5) 20 mm thick

Supply and placing of the M20 Design Mix using of 10mm HBG crushed metal 0.480cu.m,6mm HBG Crushed metal 0.320cu.m,sand 0.400cu.m and cement 350Kg with water cement ratio of 0.53(185.50 ltrs/cu.m of CC) etc., from any source confirming to the relevant ISI standard including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, vibrating, laying concrete, curing etc., complete with minimum cement content as per IS code from standard suppliers approved by the department but excluding cost of steel and its fabrication charges, centering charges, shuttering charges for finished item of work (APSS No. 402) Note: Measurement boxes shall be used for measuring the quantities of cement, aggregate and water required for the given concrete mix if mixing is done by volume mixing.

- do - for precast slabs using 10 mm graded aggregate HBG crushed metal from any source conforming to the relevant ISI standards, with necessary reinforcement excluding cost of steel and tying of grills, centering charges,but including cost of necessary form work etc., complete as directed by the department.

- do- 50 mm thick

Supplying and fixing in position M.S Ornamental grills for windows and ventilators or for veranda openings using M.S. Flats, square rods, angles sheets etc., of approved design including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the grills with Two coats with Synthetic enamel paint Gr-I over a Primary coat (Red oxide metal primer) (total three coats) of approved make and colour including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc., complete.

Providing High Yield Strength deformed (HYSD)/ Thermo mechancially treated (TMT) steel bars below 36mm Fe-415 of specified grade (as per IS 1786 - 2008) of different diametres for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars including all wastages such as over laps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. (APSS NO.126) (In the absence of 18G binding wire,2 nos of 20G binding wire in tandem are to be strictly adhered). Note: Unless otherwise fabrication and placement of steel, no pre-pament shall be made against the supply of steel reinforcement

Painting priming coat with ready mixed Cement primer (water thinnable) for plastered surface including cost and conveyance of all materials including brushes to have smooth finish as directed during execution for exterior grade - 2 for old work

Painting with Ready mixed Synthetic Enamel paint in all shades - Grade -I having VOC (volatile organic compound) content less than 50 grams / ltre, approved colour and make including brushes to have an even shade including cost and conveyance of all materials as directed during execution complying with standard specifications etc., complete.

-do- single coat for old wood work

-do- single coat for old plastered surface & old Iron work

Two coats for new Wood work & new plastered surface

Painting with Acrylic emulsion paint Exterior grade with silicon additives having VOC (volatile organic compounds) content less than 50 grms /ltr of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all opertional, incidental, labour charges etc., complete for finished item of work as per SS 911 for external walls. for single coat for old work.

Painting with Acrylic Emulsion paint interior grade having VOC (volatile organic compounds) content less than 50 grms /ltr of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all opertional, incidental, labour charges etc., complete for finished item of work as per SS 911 for inernal walls. For single coat for old work.

Supply and fixing of stainless steel SS-304 grade tubes, sections, plates , sheets and pipes of all sizes and diameters etc., including cost and conveyance of all materials and labour charges for fabrication of stainless steel railing works using SS welding rods including buffing , polishing , lacquer finishing , to present seamless finishing etc., complete as directed during execution

Supply and fixing of Galvalume sheet Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.47mm thickness (Total Coated Thickness TCT), Coating: Alu- Zinc coating AZ150 GSM. Tensile strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours with minimum end lap of 15 cms etc.,complete as directed during execution (Original coil shall be of make TATA Blue scope/JSW)

Supply of glow sign vinyl stickered name plate / sign (or) instruction boards using 3mm foam white sheet as back ground and glow sign vinyl sticker one layer for letters of different sizes as directed during execution including cost of 3mm foam sheet vinyl sticker and all labour charges for computer design and cutting, pasting and fixing the boards as directed during execution.

supply of SYMET BIB COCK (CAT.NO:121) Standard 15mm size as per IS 9763 2000 with ISI mark male thread / Female thread with deluxe handles, 86 mm long and 102 mm high and 43 mm breadth 12mm seat dia and replaceable washers, having approx.weight of 90gms.

SYMET PUSH COCK (CAT.NO:139) 15mm with 1/2'' BSP (15MM) female threads 80mm long 30mm height and 30mm breadth having approximate weight of 47gms.

S & F Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size

Digital design, Supply and erection of flex sheet boards with back support of frame work made with 25mm x 25mm MS square pipe (light weight) to erect all the specified places as directed by the department. The cost is including all materials, labour for printing, erection at specified place including cost and conveyance of all materials, labour charges etc., complete as directed by the department .

Hire charges for supply, erection and removal of digital design flex boards with frame work made with of 25mm x 25mm MS square pipe (light weight)with required back support to erect boards at specified places as directed by the department. The cost inclusive of materials, labour for printing, erection and removal square pipe (light weight) after completion of the function.

Hire charges for Supply and erection of digital design flex banner with required material like threads and sticks etc., to erect specified place as directed by the department. The cost is including material, labour for printing, erection and removal after completion of the function etc complete as directed during execution.

Supply and fixing of 110mm dia 3M Single socket PVC /SWR pipe - 6kg/sq.cm - Prince / Sudhakar / Kisan / Supreme or any ISI Brand.

Supply and fixing of 75mm dia 3M Single socket PVC /SWR pipe - 6kg/sq.cm - Prince / Sudhakar / Kisan / Supreme or any ISI Brand.

Supply of 110mm dia - Plain Bend 87.5 Degree - UPVC/SWR pipe fittings (Prince / Sudhakar / Kisan / Supreme or any ISI Brand)

Supply of 110mm dia - Door Bend 87.5 Degree - UPVC/SWR pipe fittings (Prince / Sudhakar / Kisan / Supreme or any ISI Brand)

Supply of 110mm dia - Coupler - UPVC/SWR pipe fittings (Prince / Sudhakar / Kisan / Supreme or any ISI Brand)

Supply of 75mm dia - Plain Bend 87.5 Degree - UPVC/SWR pipe fittings (Prince / Sudhakar / Kisan / Supreme or any ISI Brand)

Supply of 75mm dia - Door Bend 87.5 Degree - UPVC/SWR pipe fittings (Prince / Sudhakar / Kisan / Supreme or any ISI Brand)

Supply of 75 mm dia - Coupler - UPVC/SWR pipe fittings (Prince / Sudhakar / Kisan / Supreme or any ISI Brand)

S & F Gunmetal Gate (GM peet) valve of 25 mm NB Size as per IS - 778 Class - I, Indian make heavy type .

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007)

28.60mm ODPipe - SDR 11

22.20mm ODPipe - SDR 11

Supply of Quarry Spall (M-008)/ Gravel for Road works to site of work as directed during execution

Construction of granular sub base (By Mix in Place Method at quarry) by providing Close graded material (Table 400-1) including conveyance, spreading in uniform layers with motor grader 110 HP, on prepared surface, mixing materials with Tractorrotavator at OMC including cost of watering and compacting with vibratory roller 8-10 tonnes capacity to achieve desired density etc., complete as per Technical specification vide clause No.401 of MORD/MORTH (4th Revision) and as directed by the Engineer-in-charge. for grading-III material ( CBR value = 20 (minimum)

Providing and fixing pre cast concrete blocks (inter locking pavers ) using not less than M40 grade paver blocks and thickness not less than 80mm for medium traffic areas conforming to IS15658 - 2006 of all shapes and designs as per the specification, overs and bed of 20 mm to 40 mm (30 mm average) thickness and compacting with vibrating plate compact or having 3 tonne compaction force there by forcing part of sand under neath to comeup in between joints. final compaction of paver surface to bed on after spreading and brushing the fine sand into joints to its final level. The work includes cost of all materials such as inter locking pavers, sand etc., Labour and equipments such as cutting machine, lift, loading & unloading to worksite clearing, bringing required all materials for the successful completion of work as per drawings and Technical Specification Clause1504 MORD and as directed during execution by the Engineer-in- charge of the work. Note i. Thickness of interlockrng pavers and underlaying sand bed shall be as per the Table 1 of IRC SP:63-2004 based on the taffic and type of road. The data can be worked oul accordingly i.e l.Cycle tracks and pedeskain footpaths, 2. Residential streets, 3. lnduslrial streets, bus and truck parkings areas and 4. Arterial ii. The base and sub-base over which interlocking pavers are to be laid shall also be as per lhe Table 1 of IRC SP:63-2004 based on the traffic and type of road/ground surfaces.

Flooring with cement concrete floor tiles of 25 mm thick confirming to IS 1380- 12013/IS 1237-2012 of following sizes set over base coat of cement mortar (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sq.m & jointed with neat cement to full depth mixed with pigment of matching shade including cost & conveyance of all materials, etc., complete for finished item of work. (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the tiles against supply) Chequered cement concrete heavy duty tiles confirming to IS:13801 using aggregates, cement, pigments of size 300 X 300 x 25mm of any shades

Providing and laying of Hot applied Thermoplastic Compound 2.5 mm thick including with Reflectorising Glass Beads @ 250gms per Sqm area, thickness of 2.5 mm is exclusive of surface applied Glass Beads as per IRC:35, including cost and conveyance of material, labour charges, hire charges of machinery, for finished item of work. The material should be of BERGER make (as per MORTH 803). The finished surface to be level, uniform and free from steaks and holes as per specification 803 MORTH. on Bituminus surface

Hire charges for Tractor (for pulling) including all incidental charges etc. complete.

Supply of machinery in desilting works guide lines for engaging Excavator - loader JCB (Capcity / out put of machine 0.24/1 Cum) 1. The owner should transport the JCB to the work spotat his own costs 2. The Excavator - loader (JCB) should excavate a minimum of 40 cubic meter of Earth per hour. 3. The Excavator - loader (JCB) should load 20 tractor as per hour with quantum of 2.83 cubic metre of loose factor per each tractor. 4. The rate per hour is inclusive of all the costs like POL, Transportation of Machine, Driver Batta and other incident charges. 5. The payment of the JCB should be paid hourly basis subject to the condition 2&3 cited above. 6. The Excavator - loader (JCB) should have the Tacho metre and it should function properly.

Supply of following labour required for maintenance work such as welding works, stone works, masonry works, carpentory works etc., and other emergency works as and when entrusted by the department during execution.

,-do- Masons / carpenters / stone cutters / plumbers / Painter - 2nd class

Man Mazdoors / women mazdoors