Construction of Mata Baglamukhi temple Ropeway Distt. Mandi H.P. SH Balance work of electrical in the staircase and FOB at UTP and LTP.

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (i) Group C.

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2 way piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as require

2x1.5 Sq. mm +1x1.5 Sq. mm earth wire

2x4.00 Sq. mm +1x4.00 Sq. mm earth wire

2x6.00 Sq. mm +1x6.00 Sq. mm earth wire

Supplying & fixing of modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required

2 modules (78mmx78mmx50mm)

4 modules(140mmx78mmx50mm)

6 modules(205mmx78mmx50mm)

8 modules (120mmx135mmx60mm)

12 modules (205mmx135mmx60mm)

Supplying & fixing following size modular base and cover plate on the existing modular metal boxes as required:-

Modular base and cover plate, 2 module

Modular base and cover plate, 4 module

Modular base and cover plate, 6 module

Modular base and cover plate, 8 module

Modular base and cover plate, 12 module

Supplying & fixing Modular blanking plate on the existing modular metal box as required:- as per direction as satisfaction of engineer- in -charge.

Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required. as per direction as satisfaction of engineer- in -charge.

Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required. as per direction as satisfaction of engineer- in -charge.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. as per direction as satisfaction of engineer- in -charge.

Supplying and fixing brass batten/ angle holder including connection etc. as required. as per direction as satisfaction of engineer- in -charge.

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- Single pole. Cat-A.

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- Double pole. Cat-A.

Triple pole & Neutral. Cat-A.

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. as per direction as satisfaction of engineer- in -charge.

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. as per direction as satisfaction of engineer- in -charge. 63 Amps. Cat-A.

Supplying and fixing following way , single pole and neutral, sheet steel,MCB distribution board, 240V ,on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) Double door-8 way

Supplying and fixing of following ways surface/recess mounting,7 Segment 415 volts, TPNMCB distribution board of sheet steel, dust protected, duly powder painted, with provision tomount 8 module MCB incomer, 4 module sub-incomer in each phase and SPMCBs as outgoing (but without MCB’s and incomer), complete with tinned copper din-bar, wire-set, neutral link, earthbar, detachable and plate, cable interconnections, including earthingetc. as required:-(Note: 7 Segment 415volts, TPDB is normally used for 3 phase final distribution outlets are required.) Double door +6 way (8+12+18)

Providing and installation of following type of surface mounting square/round type LED Flood Light with aluminium die cast housing in white finish with anti glare polycarbonate diffuser and seprated energy efficient constant current, non integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing etc. as required: of Approved Make Providing and installation of Flood Light 50W

Providing and fixing LED Rope Light (Strip Light) RED in colour to the periphery of the building with all respect . as per direction as satisfaction of engineer- in -charge.

Providing and fixing/ installation of solar street light 60 watt (LED Osrm) with 18 AH lithium battery inbuilt (RCRS)+75 watt solar panel module (UTL/Luminious /warree)+16ft. pool M.S (3 inch dia/2mm thickness)+light and panel frame etc. complete in all respect as per direction as satisfaction of engineer- in -charge.

Providing and installation of suspended type of industrial ultra slim decorative LED batten with extruded aluminium heat sink, with anti glare polycarbonate diffuser and energy efficient constant current integral electronic driver, suitable for input voltage AC 220-240 V. 50/60Hz, complete with all accessories, testing and commissioning etc. as req. Make Syska, Havells, Bajaj or any other approved by Engineer-in-Charge. LED Tube 20W

Supply and fixing LED rope light(Strip light) Adaptors. as per direction as satisfaction of engineer- in -charge.

Providing and installation of following type of recess mounting all, sqyare type LED panel in white finish, including making suitable cut-out in the existing celling with all accessories, testing and commissioning etc. as req. Make: Syska, Philips, Bajaj, Panasonic or any other approved by Engineer-in-charge.

Providing and fixing/ installation of solar street light 60 watt (LED Osrm) with 18 AH lithium battery inbuilt (RCRS)+75 watt solar panel module (UTL/Luminious /warree)+16ft. pool M.S (3 inch dia/2mm thickness)+light and panel frame etc. complete in all respect as per direction as satisfaction of engineer- in -charge.

K.R. Verma Elec. Contractor (BID ID -500231)

AMIT VERMA CONTRACTOR (BID ID -500211)