Special repair to Senior Boys Ho Hostel in Dr R.P. Govt. Medical College at Tanda in Distt Kangra (HP) (SH-Dismantling tile, repair of plaster providing and fixing floor tiles wall tile aluminium work, wooden work, WS and SI etc in toilet of block-A)

Amount

Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground, all completeas directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Repairs to plaster of thickness 12 mm to 20 mm (Twelve millimetres to twenty millimetres) in patches of area 2.5 sq.meters (Two point five square metres) and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground with cement mortar 1:4 (1 cement : 4 fine sand) complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm (Twenty millimetres) nominal size) complete complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and laying 600x600 mm (Six hundred into si hundred millimetres) of size Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% (Zero point eight precent) and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately) complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% (Zero point zero eight precent) and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm (Six millimetres) thickness, including grouting of joints (Payment for grouting of joints to be made separately) complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15 ) fixed with raw plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/ neoprene felt etc. Aluminium section shall be smooth, rust free , straight, mitred and jointed mechanically where ever required including cleat angle, aluminium, snap beading for glazing/panelling C.P. brass/stainless steel screws for doors windows and ventilators and glazed partitions frames complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15 ) fixed with raw plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/ neoprene felt etc. Aluminium section shall be smooth, rust free , straight, mitred and jointed mechanically where ever required including cleat angle, aluminium, snap beading for glazing/panelling C.P. brass/stainless steel screws For shutter of doors windows & ventilators including providing and fixing hinges/pivots and making provisions for fixing of fittings where ever required including the cost of PVC/neoprene gaskets as required (fittings and glazing/panelling shall be paid for separately) complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 250 x 10mm (Two hundred fifty into ten millimetres) size aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 100 mm (One hundred millimetres) aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 300x16mm (Three hundred into sixteen millimetres) anodized aluminium sliding door bolts anodized transparent or dyed to required colour and shade with necessary screws etc. complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing oxidized M.S. presses parliamentary hinges with necessary screws etc. complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 12mm (Twelve millimetres) thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge. Pre-laminated particle board with decorative lamination on both sides complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic With float glass panes of 4.0 mm (Four point zero millimetres) thickness (weight not less than 10 kg/ sqm) (Ten kilograms/square) complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 6mm (Six millimeters) thick plain asbestos cement sheet ceiling of approved quality with butt jointing and wood screws (frame work and cover fillets to be measured and paid for separately) complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm (Eigteen millimetres) thick stone slab over 20 mm (Twenty millimetres) (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing, polishing and moulding in single or double layer etc. all complete as specified and as directed by the Engineer-in-Charge Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Steel work welded in built up sections,trusses and framed work, including cutting ,hoisting, fixing in position and applying a priming coat of red lead paint in beams joists channels ,angles, tee , flats with connecting plates or angle cleats as in main and cross beams,hip and jackrafters,purlins connected to common rafters and the like complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm (Twenty millimetres) nominal size) complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge Second class teak wood 35 mm (Thirty five millimetres) thick shutters complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 300mm (Three hundred millimetres) bright finished hard drawn hooks and eyes complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 100mm (One hundred milimetres) bright finished brass door stoper with rubber cushion screws etc to suit shutter thickness complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (Ten millimetres) gap for thermal expansion, (i) Single socketed pipes complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

100mm (One hundred millimetres) dia pipes

150mm (One hundred fifty millimetres) dia pipes

Providing and fixing Single tee with door complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing Single tee with door 110x110x110 mm (One hundred ten into one hundred ten into one hundred ten millimetres)

Single tee without door 110x110x110 mm (One hundred ten into one hundred ten into one hundred ten millimetres)

Bend 110 mm (One hundred ten millimetres) bend

Providing and fixing wash basin with C.I. brackets, 15 mm (Fifteen millimetres) C.P. brass pillar taps, 32 mm (Thirty two millimetres) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 630x450 mm (Six hundred thirty into four hundred fifty millietres) with a pair of 15 mm C.P. brass pillar taps complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 580mm (Five hundred eighty millimetres) of size vitreous China wash down, water closet squatting pan Long pattern W.C. pan complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing sand cast iron 100mm (Hundred milimetres) size Cera or its equivalent P or S traps for water closet (squatting pan) including jointing the trap with pan and soil pipe in cement mortar 1:1 (one cement: one sand) complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing plastic seat (Solid/Hollow type) and cover Cera, Jaquuar and Hindware for wash down water closet with C.P. Brass hinges and rubber buffers complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 100 mm (One hundred millimetres) sand cast Iron grating for gully trap complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing wash basin with C.I. brackets, 15 mm (Fifteen millimetres) C.P. brass pillar taps, 32 mm (Thirty five millimetres) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: Stainless Steel AISI-304(18/8) Round basin 405x355 mm (Four hundred five into three hndred fifty five millimetres) with single 15 mm (Fifteen millimetres) C.P. brass pillar tap complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 32mm (Thirty two millimetres) dia C.P. Brass waste pipe for wash basin or sink ISI make complete .

Providing and fixing 32mm (Thirty two milimetres) diametres M.I. Union for wash basin or sink ISI make complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 600x450mm (Six hundred into Four hundred fifty milimetres) size bevelled edge mirror of superior glass mounted on 6mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 32mm (Thirty two millimetres) dia C.P. Bottle Trap for wash basin and sink complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing recessed Roll type toilet paper holder complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 32mm (Thirty two millimetres) to wall ceiling and floor complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing chromium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws Cera, Jaquuar and Hindware complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 15mm (Fifteen milimetres) diameters long nose brass bib tap (Superior or heavy type) Cera, Jaquuar and Hindware complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 15mm (Fifteen milimetres) dia long body brass bib tap (Superior or heavy type) Cera, Jaquuar and Hindware complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 15mm (Fifteen milimetres) C.P. brass angle valve without nuts and pipe Cera, Jaquuar and Hindware complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing P.V.C. connection 300x450mm (Three hundred into four hundred fifty millimetres) length with check nut and brass union Cera, Jaquuar and Hindware complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing water closet squatting pan (European Type) mounting water closet of size 780x370x690 mm (Seven hundred eighty into three hundred seventy into six hundred ninety millimetres) of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (Three litre/six litre) (adjustable to 4 litre/ 8 litres (Four litre/eight litre), including seat cover, and cistern fittings, nuts, bolts and gasket etc. complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing PTMT jet spray of approved quality and colour with one metre tube complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) Cera or its equivalent approved quality tube fitting and clamps including making good the wall, ceiling and floor complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

15mm (Fifteen milimetres) nominal bore

20mm (Twenty milimetres) nominal bore

Providing and fixing vitreous china wash down water closet (European type W.C. Pan) Hind-ware, cera, parry, ware or equivalent make including jet pressure with integral ‘P’ or ‘S’ trap including jointing the trap with soil pipe in cement mortar 1:1 (1 cement: one sand) seat and cover to be measured and paid for separately) Angle Indian Universal closet complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 15mm (Fifteen millimetres) PTMT concealed stop cock with flange of approved quality and colour complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 600x120mm (Six hundred into One hundred twenty milimetres) glass shelf with C.P. brass. (Heavy duty makes) brackets and guard rail complete fixed to wooden plugs with C.P. brass screws complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 15mm (Fifteen millimetres) PTMT pillar cock fancy of approved quality and colour complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing bath shower Cera or its equivalent complete with necessary fitting complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing Mixer for kitchen sink with casted swinging spout at top Cera or its equivalent complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 600x20mm (Six hundred into Twenty milimetres) size C.P. Brass Towel rail Cera or its equivalent complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws complete.

Providing and fixing brass full way valve with wheel complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

15mm (Fifteen millimetres) nominal bore

20mm (Twenty millimetres) nominal bore

Providing and fixing 32mm (Thirty two millimetres) dia C.P. Brass chain 50cm (Fifty centimetre) long and rubber plug of following sizes for sink or wash basin complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 32mm (Thirty two millimetres) dia rubber plug for sink/wash basin complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing G.I. inlet connection for flush pipe with W.C. Pan complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.

Saini

parveen kumar

MUKESH CHAND