CAD Cluster of 7 Nos FIS under Chauntra Block in Tehsil Joginder Nagar Distt MandiHP SHCAD of FIS Sarkari Kuhl HDPE pipe 75 mm 186 Rmt, 90mm 150 Rmt 125 200 160 mm 50 Rmt Line NO 5 RD from 2840

Amount

Excavation in foundation and trenches in earth work upto all depth in all kinds of soil such as pick work jumper work,blasting work,chiselling of soft /hard rock where blasting is prohibited in all leads and lifts and including trimming of sides levelling of bed to correct grade stacking the excavated soil in 15cm.layers when required into plinth sides of foundation including consolidating each deposited layer by ramming and watering and then disposing oof all surplus excavated soil as directed in all leads and lifts and soring/strutting timbering and dewatering where ever required to the entire satisfaction of the Engineer-in-Charge.

Laying,jointing,testing and commissioning of HDPE(High Density Polyethylene pipes) of following diameter and class confirming to IS 4984-1995 with fusion welding process including all necessary fittings in all leads and lifts to the entire satisfaction of Engineer-in-charge (Earth work in trenches to be measured and separately)

HDPE, 75Φ, PN 4.0, PE80

HDPE, 90Φ, PN 4.0, PE80

HDPE, 125Φ, PN 4.0, PE81

HDPE, 160Φ, PN 4.0, PE82

Providing & Laying cement concrete 1:4:8 ( 1 cement :4 approved sand :8 approved graded stone aggregate 40mm nominal size ) & curing complete excluding the cost of form work in foundation and plinth.

Providing and laying cement concrete 1:6:12( 1cement:6 sand:12 graded stone aggregate 40 mm nominal size) and curing complete excluding the cost of form work in:- foundation and plinth.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring, shuttering , strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor two level. Vertical surfaces such as walls (any thickness) partitions and the like i/c attached pillasres buttresses,plinth & string courses and the like.

Providing and laying cement concrete 1:2:4 (1Cement:2 sand:4 graded stone aggregate 40mm nominal size) and curing complete excluding the cost of reinforcement and form work in wall in all leads and lifts

Providing and laying cement concrete 1:5:10 with 15% plum (1Cement : 5 sand : 10 graded stone aggregate 40mm nominal size) and curing complete excluding the cost of form work foundation and plinth in all leads and lifts

Boulder Filling with in all leads and lifts.

Providing & laying cement concrete1:1.5:3 (1Cement:1.5sand:3 graded stone aggregate 20mm nominal size) & curing complete excluding the cost of form work & reinforcement for reinforced concrete work in :-

Foundation,footing,bases of columns and the like & mass concrete.

Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete up to floor two level.Tor steel

Providing and fixing R.C.C. pipe 900mm dia NP2.

Providing and fixing R.C.C. pipe 350mm dia NP2.

Providing and fixing of sluice valve of 100 mm dia of approved ISI make with latest amendment complete in all respect with MS connecting rod 1.5 mtrs long to operate wheel of sluice valve i/c jointing of HDPE end cap joint with connection pipe 110mm OD and to the entire statisfaction of Engineer in charge.

Providing and fixing of M.S. angle bracket to cover & safety of sluice valves in side out let chamber 25x25x4mm

Providing and fixing of celling for locking of manhole cover.

P/F of HDPE pipe Tee 100mmx90mmx63mm with Qc end ( copler on both end of tee) on HDPE pipe with existed pipe of out let dia 110mm OD (Butt fusion).

SANJAY KUMAR

Sudarshan

SPARSH MEHTA