Extension of Walkway from Ekta Nagar Railway Station to Visitor Centre at Ekta Nagar

Name of Work: Extension of Walkway from Ekta Nagar Railway Station to Visitor Centre.

Sr No Description QTY Unit Item Rate Amount

Clearing and grubbing road land including uprooting rank vegetation

grass bushes,shrubs,sapling and trees girth up to 300 mm removal of

1 stumps of trees cut earlier and disposal of unserviceable materials (A) 0.05 Ha ₹ 86,262.08 Rs

By manual means in area of light jungle

Demolition including stacking of serviceable materilas and disposal of

2 unserviceable materials with all lead and lift. (i) R.C.C. work 38.48 Cum ₹ 1,108.12 Rs

Dismentling barbed wire in fencing including making rolls and also

including dismentling fencing posts including all earth work concrete in

base and making good the disturbed ground stacking useful materials

as directed and disposing as directed and disposing of the

unserviceable materials with all lead and lift

Scarifying gravelled macadam or bitumen macadam surface 6 cm to

4 10 cm.depth including stacking useful materials on road side and 60.00 Sqm ₹ 42.59 Rs

disposing off remaining stuff.

Excavation for foundation upto 1.5 m depth including sorting out and

5 stacking of useful materials and disposing off the excavated stuff upto 251.26 Cum ₹ 272.57 Rs

50 Meter lead.(B) Dense or Hard soil

Filling in foundation and plinth with murrum or selected soil in layers of

6 20cm. thickness including watering, ramming and consolidating etc. 165.75 Cum ₹ 304.60 Rs

Filling available excavated earth (excluding rock) in trenches.

plinth, sides of foundations etc. in layers not exceeding 20 cm. in

7 depth consolidating each disposited layer by ramming and 227.00 Cum ₹ 137.47 Rs

Wet Mix Macadam (WMM)

Providing, laying, spreading and compacting graded stone aggregate

to wet mix macadam spacification including trimix the materials with

water at OMC in mechanical mix plant carriage of mixed materials by

tipper to site laying in uniform layers (Layer should not be more than

200 mm)with paver in sub base/base course on well prepared surface

and camber with Sensor paver consolidation by vibratory road roller to

achieve the desired density by using machine crushed chips as per

required gradation mixing with required optimum quantity of water incl

material, labour, plant and machinary and equipment etc. complete.

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse

sand : 4- graded stone aggregates 20 mm nominal size) and curing

complete excluding cost of formwork in (A) Foundation and Plinth

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

10 bending, binding and placing in position complete upto floor two level 1095.20 Kg ₹ 77.29 Rs

Providing formwork of ordinary timber planking so as to give a rough

finish including centering shuttering strutting and propping etc. Height

of propping and centering below supporting floor to ceiling not

exceeding 4 M. and removal of the same for in situ reinforced

concrete and plain concrete work in. (A) Foundations Footings Bases

of Columns etc. and Mass concrete.

Providing and fixing pre-cast concrete kerb stone of gray cement

based concrete block 30cm length,30cm height and 15cm thick of

12 M200 grade concret as per approved design and including excavation 190.00 Rmt ₹ 413.84 Rs

for fixing in proper line and level,filling the joint with C:M 1:3

(1cement:3fine sand) etc complete.

Providing and fixing pre-cast concrete kerb stone of gray cement

based concrete block 30cm length,45cm height and 15cm thick of

M200 grade concret as per approved design and including excavation

for fixing in proper line and level,filling the joint with C:M 1:3

(1cement:3fine sand) etc complete.

Name of Work: Extension of Walkway from Ekta Nagar Railway Station to Visitor Centre.

Sr No Description QTY Unit Item Rate Amount

Providing and laying shot blasted non interlocking, paver blocks

60mm thick M-40 grade of specified thickness, size, grade of concrete

and colour machine made and blasting by automatic shot blasting

machine and high density of as per approved sample of approved

make for footpath, parking areas, service lanes, cross over and other

areas as mentioned in the drawing. Including providing and laying

to 80 mm thick average bedding layer of coarse sand below paver

block as per required grading and specification. Laid paver block shall

be mechanically compacted. The work of the paving blocks shall be

executed in line and level by skilled mason of flooring work only.

14 Small size of paver block with same specifications shall be used at 225.00 Sqmt ₹ 1,165.54 Rs

residu or at end. It should be laid in such a way that the no cutting of

the paver block to be necessary. If cutting of paver block shall be

required, than cut by machine only and laying to be done by skilled

flooring mason. The Finished surface of the paver block shall have

coarse sand texture finish. Paver blocks shall be compacted and shall

be relaid if necessary. Actual laid area shall be measured and paid

without any wastage.A) 60mm thick M-40 grade Paver block of size

size 200mm x 200mm and 200 x

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in

Cement Mortar 1:5. (1- Cement : 5 -fine sand) (A) Modular

Providing 10mm thick cement plaster in single coat on brick/concrete

walls for interior plastering upto floor two level and finished even and

smooth in (i)Cement mortar

1:3 (1-cement:3-sand)

Providing and fixing , jointing 450mm wide precast concrete Saucer

drain including cost of excavation, earth filling,watering ramming

17 consolidation and laying bed concrete to required slope as per 100.00 Rmt ₹ 1,849.31 Rs

approved sample and as per manufacturer's specifications design and

drawing complete.

Providing laying (to level or slopes) and jointing reinforced concrete

Light duty non-pressure pipes I.S. class NP2 of the following internal

diameter with collars and butt ends prepared for collar joints including

testing of joints complete.(D) 300mm

Concrete bollard- Supply of Concrete Bollards 600 mm high of

approved shape and design and fixing details. Casted in rubber, glass

19 fiber or equivalent mould using M20 concrete mix. The outer surface 16.00 Each ₹ 1,393.80 Rs

need to be coated with matt finish sealer. (200x200x600).

Providing and fixing of information based signage of size 1.2m(W) x

1.2m (H) made up of Red Agra Stone with S.S. Frame of 50mm

square piep along with dual support including Excavation, Concreting,

etc. This includes base work in SS structure with all fixing hardwares.

Inclusive of all - fixtures, fittings, hardware, hanging system, or any

other mechanism required to make it functional. The structural

20 stability of the installation to be vetted by the structural consultant of 1.00 Each ₹ 50,651.50 Rs

the contractor.The cost of outdoor lighting is included. The artwork to

be etched/engraved in the signage/panel with upto 8mm depth, filled

with pigment for the required effect. The work to be completed with

different steps and in all respect as per the direction of Engineer- in-

charge as per drawing and the same to be fixed at the location

provided. Shop drawings to be approved by the EIC.

Providing & fixing M.S. Railing 1m height with necessary foundation

21 design as per Architect / EIC. 200.00 Rmt ₹ 1,754.37 Rs

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipe,

having thermal fittings, including fixing the pipe with clamps at 1.00 m

spacing. This includes jointing of pipes & fittings with one step CPVC

solvent cement and testing of joints complete as per direction of

Engineer in charge.50mm nominal dia pipes

23 Providing and fixing CPVC Ball valve. (A) 50 mm dia. 14.00 Each ₹ 1,444.30 Rs

Name of Work: Extension of Walkway from Ekta Nagar Railway Station to Visitor Centre.

Sr No Description QTY Unit Item Rate Amount

Providing High-precision auto level featuring a magnetic damping

compensator with 4 super-high-tensile suspension wires for rapid

(under 1 sec), accurate, and stable compensation (setting accuracy:

0.5"). Includes a 32mm aperture telescope with 24x magnification,

24 providing 2.0mm accuracy (1km double run). Features 0.2m (7.9 in.) 1.00 Set ₹ 20,200.00 Rs

ultra-short focusing for confined spaces, IPX6 water/dust resistance

rating, and endless horizontal drive knobs with inbox, tripod & 2 nos of

5 metre aluminium staff with 1 year warranty

Section Pillar : Providing and erecting Three Phase IoT GSM/GPRS

Central Control & Monitoring System (CCMS) Panel for Streetlights

Smart Feeder Panel with 3 Phase GSM/GPRS CCMS Streetlight

Controller with LCD Display (1 Nos.). Streetlight Controller with

Individual each Phase Control (Energy Saving feature) and Spare

relay facility. Streetlight Controller having 10 years of reserved battery

for RTC. With 50 programmable schedule, month-wise offset settable

facility, Astronomic sunrise/sunset time programming in-built for year

long schedule. Operating Voltage @ 440 V AC with Over Voltage &

Short Circuit protection. 2 hour Battery Back-up for Streetlight

Controller. Panel to have 1 Nos. of 3 Phase – Class 1 Energy Meter

for Energy & Fault monitoring on CCMS Web Dashboard. Panel

consisting of 3 Nos. of 3 Pole Contactors (3 x 18 A), 7 Nos. of 1 Pole

25 Miniature Circuit Breakers (32 Amp.) for Bypass, Input / Output supply 1.00 EACH ₹ 1,00,427.33 Rs

functionalities, 1 Nos. of 4 Pole Earth leakage circuit breaker for

safety protection. Standard lock & key facility for Panel security. Door

Switch for unauthorized access & tamper detection. Accelerometer for

panel movement detection & tamper alerts. Suitable amount of Wires,

Connectors, Terminal Blocks included in Panel. 16/18 gauge M S with

industrial exterior powder coated PP with seven tank process RAL

7035 All weather-proof Enclosure Panel having IP65 rating.

Waterproof Glands & Grounding Stand included. Dedicated IoT

communication GSM/GPRS SIM Card (with minimum 5 years of

recharge) for Wireless Communication with CCMS Web Dashboard.

Years Data Hosting & Server Charges to be included with CCMS Web

Dashboard. Load status, Live analytics, Energy Meter monitoring

(Parameters such as kW, kWH, PF, I, V), comparative analytics,

reports generation

Providing facility.XLPE

and erecting Fault detection on web ISI

(IS:7098)(I)-88 dashboard.

armouredGIScable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of following size of

(B) 4 core 25 Sq. mm

Solder less crimping type Copper lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/cadmium plated nut

bolts in an approved manner.

Solder less crimping type Aluminium lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/cadmium plated nut

bolts in an approved manner.

Supplying and erecting Flexible PVC insulated multi strand multi core

29 1.1 kv grade ISI marked copper wires of following size to be erected 500.00 Mtr ₹ 46.46 Rs

(e) 1.50 Sq.mm 3 core round PVC sheathed

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

30 connecting accessories of same material at required depth in existing 500.00 Mtr ₹ 62.62 Rs

trench for laying of cable. below ground / road surface for enclosing

(A)50 mm outer dia

Name of Work: Extension of Walkway from Ekta Nagar Railway Station to Visitor Centre.

Sr No Description QTY Unit Item Rate Amount

Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high charge

31 dissipation suitable for following type of applications with chamber and 2.00 Each ₹ 4,591.46 Rs

heavy duty cover.(approved make OEM has to submit test certificate)

& having back filling compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound :- Earthing compound should be capable

to retain moisture for long time Necessary test report must be

(a) For Electrical Installation up to 440V in normal soil Length of pipe -

1 Mtr Back filling compound - 1 Nos Bag of 15 Kg.

Providing and erecting required size HOT deep Galvanised iron strip

32 for earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors 20.00 Kg ₹ 77.77 Rs

etc. using proper clamp.

Providing and erecting HOT deep Galvanised iron strip wire 8 to

(b) LED Bollard fittings of minimum height 600 mm & dia.100mm

having polycarbonate clear/milky diffuser mounted on 3mm thick

34 aluminium finished powder coated pipe with base plate 160x160mm 20.00 Each ₹ 3,161.30 Rs

with erection by M8x75mm fastner with required RCC foundation.IP65

for 9 to 20 watt ,surge-4kv- cat-III

Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High

pressure die cast aluminum housing with smooth finish powder coated

and heat sink extruded aluminium with diffuser and Polycarbonate

optics/ lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than 0.95,

THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges

(C) Post Top Lantern LED fitting comprises of finish cast aluminum

spigot and spun aluminum canopy fixed with opal polycarbonate, pipe

arrangement for vertical mounting driver and accessories wired upto

terminal block.IP

(ii)32-40W (Cat-lll)

Supplying and erecting approved make Conical Pole (Medium Duty )

Made from HR sheet steel. The pole should be made as per IS. and

shall be coated with hot dip galvanizing as per IS 2629/2633/4759,

with required base plate and integral Junction box consist of terminal

plate of min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-

Rail for MCB Mounting, stud type terminal and arrangement for cable

terminations as erected on suitable foundation (included) with

necessary GI nut-bolts/J-Bolts. as per details given by manufacturer

considering site requirement. The length of poles are as below.

(B) 4 Mtr. Long 70 mm Top X 130 mm bottom dia, 3 mm thickness

providing and erecting Miniature circuit breaker single pole 0.5A to 2A

37 system and having breaking capacity 10 KA to be erected in existing 40.00 Each ₹ 270.68 Rs

box. confirming to IS 8828/1996 with ISI Mark Cat-III

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm

or required depth for laying any size of cable or locating the fault all

over the run and back filling the same and making the surface as

Name of Work: Extension of Walkway from Ekta Nagar Railway Station to Visitor Centre.

Sr No Description QTY Unit Item Rate Amount

I/We am/are willing to carry out the work at… ...................... % above/below percent(Should be written in figures and words) of the

estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

The Contractor shall exhibit a board with brief details of work as directed by the Engineer-In-Charge for which no extra payment shall be

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

GST and Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R. NO.: MIS102010/17/K1

Dated:30/07/2018 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference

4 of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.