Balance work special repair of DMC office in Ward No.6.

Amount

Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge. For doors windows and For doors windows and ventilatiors and glazed partitions frames including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing 5mm thick Pvc of standard quality and of approved shade & design wall panneling i/c fixing with approved adhesive, butt jointing and nails & screws complete including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing angle iron door,window,clerestory window frame manufactured from steel iron section of 40X40X6 mm,thickness including hinges jamb,lock jamb,beed and if required angle thrashold ofmild steel angle 50X25 mm welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel but thinges 2.5 mm thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In_charge (cost of aluminium snap beading shall be paid in basic item.)glazing with glass panes of 4mm thicknessincluding carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing exaust fan complete including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing glazing in aluminium door, window,ventilator shutters and partition etcwith PVC/neoprens gasket etc.completeas per the architectural drawings andthe directions of Engineer-In_charge (cost ofaluminium snap beadingshall be paid in basic item.)1217603010 glazing with glass panes of 4mmthickness including carriage of material in all leads and lift and direction of Engineer-in-charge.

Wall painting (two coats) with acrylic emulsion paint of approved brand andmanufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including t horoughly brushing the surface free from mortar droppingand other foreign matter and sand papered smooth including applying of putty a required for metling thesurface including carriage of material in all leads and lift and direction of Engineer-in-charge.

Painting two costs (excluding priming cost on new steel and othermetal surfaces eith enamel paintbrushin to give an even shadeincluding cleaning the surface ofall dirt,dust and other foreginmatters :- -16005010 Enamel white paint including carriage of material in all leads and lift and direction of Engineer-in-charge.

Rajesh Thakur