Loading
Loading…
Loading…
Tender Value
₹1.1 L
EMD Value
₹1,375
Closing Date
3 Oct 2026, 5:00 pm6d left
Area Manager (EnM) Govindpur Area
Govindpur Area Office Post-Sonardih Dist- Dhanbad, 828125
Complete rewinding of 3 phase induction motor of Make Kirloskar 150hp,550V,1465RPM Sl. No. NAKC/M/14 of New Akashkinaree Colliery under Govindpur Area.
2026_BCCL_365849_1
BCCL/GA-III/AM (EnM) E-TENDER/2026-27/117 Date- 21.09.2026
Open Tender
Electrical and Maintenance Works
Percentage
10 days
Govindpur Area Office
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,375
24 Sept 2026
24 Sept 2026
5 Oct 2026
24 Sept 2026
3 Oct 2026
24 Sept 2026
24 Sept 2026 - 3 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | SE Copper wire SWG 17 No. | 92.7 | KG | 1,000 | ₹92,700 |
| 2 | Insulating material @15% copper cost | 1 | AU | 13,905 | ₹13,905 |
| 3 | Soldering stick | 0.75 | KG | 1,800 | ₹1,350 |
| 4 | Slot Wages | 60 | NO | 50 | ₹3,000 |
| 5 | Bearing 6319 | 1 | NO | 15,000 | ₹15,000 |
| 6 | Motor dismantling & fitting labour charg | 2 | SFT | 2,917 | ₹5,834 |
| 7 | Transporting up & down | 1 | AU | 1,500 | ₹1,500 |
| 8 | Motor rewinding labour charge | 4 | SFT | 2,285 | ₹9,140 |
| 9 | Less scrap value | 92.7 | KG | 350 | ₹32,445 |
| 10 | Total impact of GST for the purpose of CTC | 1 | Nos | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 2.35 MB
BOQ_378779.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .