Supply and Installation of Furniture to accommodate newly created I. T. Division P.W.D. in 1st Floor Room No. 115 at Purta Bhavan, Salt Lake during the year 2018 2019 WBPWD/EE/BNWD/NIQ13e/2018-2019

Amount

Supplying & installation of Gogrej or equivalent Make Impress Main desk with ERU & Ped from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA,AIOTA,Greenguard Certified Manufacturers and as per approved drawing & design/secification of Engineer-in-charge. All dimensions are in mm with variation upto +/-10%. MAIN TOP: MDF + VENEER + PU Coating of Size : 1800 W * 900 D * 750 H TOP THICKNESS – 65 mm.A leather pad on the desk adds class as well as segregates the main work area.It has an in-built KBPT . MODESTY : Size : 1640 X 600 X16 MM , MDF + Veneer + PU Coating. MOBILE PEDESTAL: MDF/PLB + Veneer + PU Coating , Size :510W * 635H * 445D mm. ERU TOP : MDF + VENEER + PU Coating, Size : 1200 W x 445 D x 660 H TOP THICKNESS – 25 mm.offers space for storage as well as CPU

Supply and placement of Gogrej or equivalent Make Chair ISO 9001:2015,BIFMA,OHSAS 18000,ISO 14001,Greenguard certified manufacturer's Chair.The seat/back shall be made up of 1.2 ±0.1cm thick hot pressed plywood measuredand upholstered with fabric and moulded Polyurethane foam together with moulded seat and back covers. The back foam shall be designed with contoured lumbar support for extra comfort. The dimensions of back shall be-50.0 cm (W) x 72.0 cm (H) and of seat shall be-50.0 cm (W) x 46.5cm. (D). The HR Polyurethane foamshall be moulded with density 45±2kg/m3-and Hardness load 16 ±2 kgf as.per IS:.7888-for 25% compression. The seat cover shall be injection moulded in black co-polymer polypropylene and back cover is vacuum formed from ABS sheets. The one-piece armrests shall be made of black integral skin polyurethane with 50-70 Shore 'A' Hardness and reinforced with M.S. insert. The armrests shall be scratch and weather resistant. The armrests shall be fitted to the seat with seat/armrest connecting strip assembly made of 0.5 ±0.05-cm. thick HR steel.The center tilt mechanism shall be designed as-360° revolving type, 17° ±2° maximum tilt on pivot at center, Upright position locking, Tilt tension adjustment. The pneumatic height adjustment shall have an adjustment stroke of 12.0 ±0.3cm. The bellow shall be 3 piece telescopic type and injection moulded in black Polypropylene. The pedestal shall be injection moulded in black 33% glass-filled Nylon-66 and fitted with 5 nos. twin wheel castors. The pedestal shall be 66.3 ±0.5cm.(76.3±1.0 cm with castors). The twin wheel castors shall be injection moulded in Black Nylon. Overall Dimensions of Chair shall be Seat Height - min 44.2 to max 54.2cm, Height - min103.3 to max 115.3cm, Width & Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm.

Supply and placement Gogrej or equivalent Make Chair of ISO 9001:2015,BIFMA,OHSAS 18000,ISO 14001,Greenguard certified manufacturer's Visitor Chair .The seat/back shall be made up of 1.2 ±0.1cm thick hot pressed plywood measured and upholstered with fabric and moulded Polyurethane foam together with moulded seat and back covers. The back foam shall be designed with contoured lumbar support for extra comfort. The dimensions of back shall be-(W)50.0 cm x (H)49.0 Cm and of seat shall be-50.0 cm (W) x 46.5cm. (D). The HR Polyurethane foamshall be moulded with density 45±2kg/m3-and Hardness load 16 ±2 kgf as.per IS:.7888-for 25% compression. The seat cover shall be injection moulded in black co-polymer polypropylene and back cover is vacuum formed from ABS sheets. The one-piece armrests shall be made of black integral skin polyurethane with 50-70 Shore 'A' Hardness and reinforced with M.S. insert. The armrests shall be scratch and weather resistant. The armrests shall be fitted to the seat with seat/armrest connecting strip assembly made of 0.5 ±0.05-cm. thick HR steel.The tubular frame shall be cantilever type & made of 0 2.54±0.03cm x 0.2 ±0.016cm.thk M.S. E.R.W tube and black powder coated (DFT 40-60 microns). Overall Dimensions of Chair shall be Seat Height -45.0cm. Height -81.5cm, Width & Depth of Chair as measured from pedestal - Width-59.0 cm and Depth-63.0 cm.

Supply and placement Gogrej or equivalent Make of ISO 9001:2015,BIFMA,OHSAS 18000,ISO 14001,AIOTA,Greenguard certified manufacturer's Table model Finesse Set , top, side panel and modesty are made with 25 MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 0.6MM THICK POST FORMED LAMINATE AND 1MM THICK BACKING LAMINATE (BDL). FLAT EDGE DULY SEALED WITH 2MM THICK PVC BEADING. 18MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 1.0MM THICK DECORATIVE LAMINATE (DL) ON BOTH SIDE. EDGE SEALED WITH 2MM THICK PVC BEADING. Extended Return Unit (ERU)top, side panel and modesty are made with 25 MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 0.6MM THICK POST FORMED LAMINATE AND 1MM THICK BACKING LAMINATE (BDL). FLAT EDGE DULY SEALED WITH 2MM THICK PVC BEADING. 18MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 1.0MM THICK DECORATIVE LAMINATE (DL) ON BOTH SIDE. EDGE SEALED WITH 2MM THICK PVC BEADING.PEDESTAL SPECS: Configuration: Box + Box + File. Dimension: 390mm W X 435mm D X 720mm H (Including Leveler). Construction & Material: 0.8mm Thick CRCA for Body Shell, Drawer Front, Front Side Stiffener, Rear Side Stiffener & Bottom. 1.2mm Thick CRCA Top Stiffener * Bottom Stiffener. 0.6mm Thick CRCA Drawer Tray. The CRCA Should be Grade D as per IS-513. Drawer Specs: All Drawers with double extension precision ball slide. For Drawer Pulling, Side wise tapered recess should be provided in shell behind drawer front. Locking: a 10 lever Cam Lock & Central RH locking with actuator should be provided. Leveler: Plastic M8 Leveler should be mounted below the Body Shell. Finish: Epoxy Polyester Powder coated to the thickness of 50 microns (+/- 10).

Supply & placement of Gogrej or equivalent Make Kareena High Back Chair from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA,AIOTA & GREENGUARD Certified Manufacturers and with approved design and drawing of EIC. The seat is made up of 1.2±0.1cm thick hot pressed plywood and upholstered with fabric or synthetic leather and moulded Polyurethane foam.the back is made up 1.2±0.1cm thick hot pressed plywood upholstered with replaceable fabric or synthetic leather upholstery covers and mouldedp polyurethane foam.The back ply and foam is designed with contoured lumber support for comfortable seating posture.Back size:48cm(W) x 76 cm(H),seat size : 51cm(W) x 48cm(D).The high resilience polyurethane foam for seat and back is moulded with density 5±2kg/m³ and hardness load16±2 kgf as per IS:7888 for 25% compression.The armrest top is made of moulded polyurethane and mounted on to a fixed type M.S. Tubular armrest support chrome plated.The arm support has static vertical adjustment of ±1.5±0.05cm.The mechanism is front pivot synchro mechanism with following features:360° revolving type,single point control,front pivot for tilt with feet resting on ground ensuring more comfort,tilt tension adjustment,4 position locking with anti-shock feature and seat/back tilting ratio of 1:2.The backrest has fixed type mechanism i.e.no back up/down adjustment.It should have pneumatic height adjustment of 9.0±0.3cm.The pedestal is fabricated from 0.2±0.02cm thick high resilience sheet(IS:DD 1079/HR skin pass),chrome plated and assembled with injection moulded black polypropylene hub cap and 5 nos. Twin wheel castors.The pedestal is 66.0±0.05cm.Pitch center dia (76.0±1.0cm with castors).The twin wheel castors are injection moulded in black nylon.The manufacturer should be having certifications like; BIFMA, ISO 9001:2008, ISO 14001:2004, ISO 18001:2007 and should have Green Guard Certification for few of its products.

Supply & placement of Gogrej or equivalent Make Kareena visitor Chair from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA,AIOTA & GREENGUARD Certified Manufacturers and with approved design and drawing of EIC.The seat shall be made up of 1.2+/-0.1cm thick hot pressed plywood measured and upholstered with fabric or synthetic leather and moulded polyurethane foam. The back shall be made up 1.2+/-0.1cm thick hot pressed plywood upholstered with replaceable fabric or synthetic leather upholstery covers and moulded polyurethane foam. The moulded polyurethane foam shall be of density 45+/-2kg/m ³, and hardness load 16+/-2kgf as per IS:7888 for 25% compression. The dimensions of seat shall be- 51.0cm(W) x 48.0cm(D) and of back shall be 48.0cm(W) x 64.5Cm(H). The armrest top shall be made of moulded polyurethane and mounted on to a fixed type M.S tubular armrest support chrome plated. The Arm support has static vertical adjustment of +/-1.5+/-0.05cm. The backrest shall consist of a fixed type mechanism i.e no back up/down adjustment. The leg frame welded assembly shall be chrome plated, made from 3.5+/-0.03cm x 1.5+/-0.02cm x 0.16+/-0.0128cm thick ellipitical MSERW tube and provided with a base plate for seat fixing. Overall dimensions of Chair shall be, Width of Chair - 66.5cm, Depth of Chair - 58.0cm as measured from pedestal below. Height from ground - 88.5cm. Seat height - 45.0cm. Dimensions tolerance / variations shall be within +/- 1 cm.

Supply & placement of Gogrej or equivalent Make Enterprise 1500 Table from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA,AIOTA & GREENGUARD Certified Manufacturers and with approved design and drawing of EIC/ .Dimension of the table 1500x750x728. Main Table Desk Laminate with Edge Band & with Metal Under structure power coated. Top Worksurface 18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding Under Modesty Panel 18mm thk. Pre Laminated Particle Board (PLB) All work surface edges Structure are duly sealed with 2mm thick PVC Edgebanding Rectangular Fabricated component in 1.2mm thick CRCA (IS:513), Finish: Powder Frame coat (Epoxy polyester) Leg Fabricated component in 38mmx25mmx1.2mm thick MS ERW Tube (IS:7138), Finish: Powder coat (Epoxy polyester) CPU Modesty 0.8mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester).

Supply & placement of Gogrej or equivalent Make Bravo Mid Back from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA,AIOTA & GREENGUARD Certified Manufacturers and with approved design and drawing of EIC. of where seat and back shall be made up of 1.2 ±0.1cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam shall be designed with contoured lumbar support for extra comfort. The seat shall be extra thick foam on front edge to give comfort to popliteal area. The dimensions of back shall be 47.5 cm(W) x 58.0 cm(H) and of seat shall be 47.0 cm (W) x 48.0 cm (D). The HR polyurethane foam shall be moulded with density= 45±2 kg/m3 and hardness load 16 ± 2 kgf as. per IS:7888 for 25% compression. The one-piece armrests shall be injection moulded from black Co.polymer Polypropylene. The mechanism shall be designed with 360° revolving type, Upright-position locking, Tilt tension adjustment, Seat/back tilting ratio of 1:3. The pneumatic height adjustment shall has an adjustment stroke of 12.0 ±0.3cm. The bellow shall be 3 piece telescopic type and injection moulded in black Polypropylene. The pedestal shall be injection moulded in black 33% glass-filled Nylon-66 and fitted with 5 nos. twin wheel castors. The pedestal shall be 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors). The twin wheel castors shall be injection moulded in Black Nylon. Overall Dimensions of Chair shall be Seat Height - min 42.5 to max 54.5cm, Height - min85.5 to max 97.5cm, Width & Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm.

Supply and placement Gogrej or equivalent Make of ISO 9001:2008,BIFMA,OHSAS 18000,ISO 14001 Greenguard certified Table Providing and supplying and placing in position study table of Dimension: 1365mm X 680mm X 735mm. Wooden top, Round tube understructure BIFMA, ISO 9001:2008, ISO 14001:2004, ISO 18001:2007 and should have Green Guard Certification for few of its products.

Supply & placement of Gogrej or equivalent Make Table from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA,AIOTA & GREENGUARD Certified Manufacturers and with approved design and drawing of EIC. .1199X590X735MM (LXBXH).WORK SURFACE:-• The panels are made from 18+- 0.5 mm thk pre laminated board as per with 2mm thk PVC edge banding . UNDER STRUCTURE:-C-FRAME:-• Made from 0.9+- 0.9 mm thk powder coated 50 microns (+- 10) CRCA MS .TUBULAR FRAME :- DIA : 25.4+- 0.3mm X 1.2+- 0.096mm thk MS ERW TUBE . • For OTHERS: SQ.: 25.4+- 0.3mm X 1.2+- 0.096mm thk MS ERW TUBE .MODESTY PANEL :-• Made from : 1.0+- 0.9mm thk powder coated 50 microns (+- 10) CRCA MS . STORAGE :-• Shell : 1.6 thk CRCA as per IS: 513 . • Drawer tray & back : 0.5 thk CRCA as per IS: 513 . • Drawer front : 0.6 thk CRCA as per IS: 513 . • Lock: cam lock . • Handles : plastic handles .

Supply and placement of Gogrej or equivalent Make Chair ISO 9001:2015,BIFMA,OHSAS 18000,ISO 14001 Greenguard certified Godrej Make Mid Back Chair .The seat and back shall be made from 1.2 ±0.1cm thk. hot pressed plywood and shall be upholstered with fabric and moulded Polyurethane foam together with seat and back covers. The back foam shall be designed with contoured lumbar support for extra comfort. The dimensions of seat shall be 45.0cm(W) x 42.0cm.(D) and of back shall be 40.0cm(W) x 47.0cm.(H). The seat and back covers shall be injection moulded in black Co-polymer Polypropylene. The HR polyurethane foam shall be moulded with density.=45±2.kg/m3 and hardness load 16±2 kgf as per IS:7888.for 25% compression. The one-piece armrests are injection moulded from black Nylon. The armrests are fitted to the seat with armrest connecting brackets made of 0.5 ± 0.05 em. thk. HR steel. The permanent contact mechanism shall be designed with 360° revolving type, 14±2°maximum back tilt only, Upright position locking, Tilt tension adjustment. The pneumatic height adjustment shall has an adjustment stroke of 11.0 ±0.3cm. The bellow shall be 3 piece telescopic type and injection moulded in black Polypropylene. The pedestal shall be injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal shall be 62.0 ±0.5cm. pitch-centre dia. (72.0 ±1.0cm with castors). The twin wheel castors shall be injection moulded in Black Nylon. Overall Dimensions of Chair shall be Seat Height - min 43.0 to max 54.0cm, Height - min87.5 to max 98.5cm, Width & Depth of Chair as measured from pedestal - Width-71.0 cm and Depth-71.0 cm.

Supply and placement of Gogrej or equivalent Make Chair ISO 9001:2015,BIFMA,OHSAS 18000,ISO 14001 Greenguard certified Godrej Make Mid Back Chair .The seat and back shall be made from 1.2 ±0.1cm thk. hot pressed plywood and shall be upholstered with fabric and moulded Polyurethane foam together with seat and back covers. The back foam shall be designed with contoured lumbar support for extra comfort. The dimensions of seat shall be 45.0cm(W) x 42.0cm.(D) and of back shall be 40.0cm(W) x 47.0cm.(H). The seat and back covers shall be injection moulded in black Co-polymer Polypropylene. The HR polyurethane foam shall be moulded with density.=45±2.kg/m3 and hardness load 16±2 kgf as per IS:7888.for 25% compression. The permanent contact mechanism shall be designed with 360° revolving type, 14±2°maximum back tilt only, Upright position locking, Tilt tension adjustment. The pneumatic height adjustment shall has an adjustment stroke of 11.0 ±0.3cm. The bellow shall be 3 piece telescopic type and injection moulded in black Polypropylene. The pedestal shall be injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal shall be 62.0 ±0.5cm. pitch-centre dia. (72.0 ±1.0cm with castors). The twin wheel castors shall be injection moulded in Black Nylon. Overall Dimensions of Chair shall be Seat Height - 49.5 cm, Width-45.0 cm and Depth-54.0 cm, Hight - 88.5 Cm

Supply and placement of ISO 9001:2015,BIFMA,OHSAS 18000,ISO 14001 Greenguard certified Gogrej or equivalent Make Welded Storwel Plain made with 4nos. Of adjustable full shelf. Its welded construction made with 0.7 mm thk.(+ 0.07mm)crca*for shelf, 0.8mm(+ 0.08mm)hight yierd srrength CRCA*8 for doors and back and 0.9mm thk. (+ 8mm) CRCA* for all other components. The *CRCA'D' grade as per IS:513 and *CRCA'D' grade high yield strength as per IS:513. Mazak handle and three way locking mechanism with shooting bolt. Height wise adjustable shelf mounting and for uniformly distributed load capacity per each full shelf is 40 Kg maximum. It has 4nos. Of adjustable full shelf and Box file A4 size (85W X 345HX285D) can be stored vertically on three shelves and the clear space above fourthn shelf is 240mm. The M10 screw type leveler with hex plastic base and epoxy powder coated to the thickness of 50 microns (+10).The manufacturer should be having certifications like; BIFMA, ISO 9001:2008, ISO 14001:2004, ISO 18001:2007.

Supply and placement of ISO 9001:2015,BIFMA,OHSAS 18000,ISO 14001 Greenguard certified Gogrej or equivalent Make Welded Storwel Minor Plain Welded Storwel Plain made with 2nos. Of adjustable full shelf. Its welded construction made with 0.7 mm thk.(+ 0.07mm)crca*for shelf, 0.8mm(+ 0.08mm)hight yierd srrength CRCA*8 for doors and back and 0.9mm thk. (+ 8mm) CRCA* for all other components. The *CRCA'D' grade as per IS:513 and *CRCA'D' grade high yield strength as per IS:513. Mazak handle and three way locking mechanism with shooting bolt. Height wise adjustable shelf mounting and for uniformly distributed load capacity per each full shelf is 40 Kg maximum. It has 2nos. Of adjustable full shelf and Box file A4 size (Height - 1270mmmm x Width - 765mm x Depth - 440mm) can be stored vertically on three shelves and the clear space above fourthn shelf is 240mm. The M10 screw type leveler with hex plastic base and epoxy powder coated to the thickness of 50 microns (+10).The manufacturer should be having certifications like; BIFMA, ISO 9001:2008, ISO 14001:2004, ISO 18001:2007.

JYOTI COMMERCIAL CORPORATION

WELL DECOR