Renovation of Kuriyathi thodu and providing fencing in necessary locations and construct a new shutter system in Nemom LA constituency

Amount

Renovation of Kuriyathi thodu and providing fencing in necessary locations

od30107/2021_2022/IA : Putting up ring bund and bailing out water during the course of construction by engaging man coolies and removing the bund after the completion of the work as directed by the departmental officers at site.

od38794/2021_2022/IA : Engaging Hydraulic excavator of 1cum bucket for shifting of slabs and other obstructions for cleaning the thodu and replacing it to the proper position after completing cleaning works

od30110/2021_2022/IA : Engaging man coolies for removing the solid wastes including plastic waste ,collecting cleaning packing and send to recycling unit. waste collected also from under side of fixed slab portions along colony area etc....complete as directed by the departmental officers at site.

od31176/2021_2022/IA : Daily hire of boat with boat man /Third class country boat with boat man for removing debris from canal

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

od31172/2021_2022/IA : Fabrication, supply and fixing of 50mm dia GI pipe for fencing ,embemded inconcrete in in line and level, including cost and carriage of all materials, labour charges etc, complete as directed by engineer in charge.

16.19 : Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete.

16.70.1 : Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts , bolts and washers as required complete as per the direction of Engineer-in- charge.Made of G.I. wire of dia 4 mm

13.50.3 : Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron /steel works

13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

5.3 : Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15⁰ landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).

4.1.6 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

4.3.1 : Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns

5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

5.22.3 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelCold twisted bars

10.19 : Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.

10.22 : Welding by gas or electric plant including transportation of plant at site etc. complete.

Prebin S.V

Bidder Name

Prebin S.V

DEEPU S