Construction and maintenance of Road From Bonibagh To BonibaghBala (Balance Work) Stage-I and II, Phase V, Package No. JK13-14, Length 1.2 Km PMGSY Division Ganderbal.

Amount

Pavement:

WBM Grading 3 : P/L, spreading & compacting stone aggregates of specific sizes to water bound macadam specification incld. spreading in uniform thickness, hand packing, rolling with three wheel roller 80-100kN static roller in stages to proper grade and camber, applying & brooming with crushable, stone screening, binding materials to fill up the interstices of coarse agg., watering and compacting to the required density grade 3 as per technical specification clause 405.manual means.including cost and carriage of all materials from approved source to site of work,with all leads, lifts, loading unloading and octori.(Finished work to be measured, complete)

Prime coat & Tack coat : Providing and applying Primer coat with low porosity bitumen (VG-10) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.00 kg/sqm using mechanical means as per Technical Specification Clause 502 & Providing and Laying tack coat with Bitumen using bitumen distributor @ 0.20 to 0.25 Kg per Sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom ar per technical specification clause 503.including cost and carriage of all materials from approved source to site of work,with all leads, lifts, loading unloading and octori.(Finished work to be measured, complete)

Bit. Macadam: P/L Bituminous Macadam 50mm thick. with Hot mix plant using crushed aggregate of grading as per Table 500.4 premixed with bituminous binder VG-10 @ 3.5% minimum, transported to site of work upto required lead , laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per technical specification clause 504 including cost and carriage of all materials from approved source to site of work,with all leads, lifts, loading unloading and octori.(Finished work to be measured, complete)

20mm thick OGPC: Providing, laying and rolling of open- graded premix carpet of 20mm thickness composed of 13.20 mm to 5.60mm size aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant laying and rolling with a three wheel 80-100KN static roller capacity finished to required level and grade to be followed by the seal coat of either type-A,Type-B or Type-C as per technical specification clause 508. by Mech. means using bitumen. (S-90)including cost and carriage of all materials from approved source to site of work,with all leads, lifts, loading unloading and octori.(Finished work to be measured, complete)

Seal Coat :- Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type B(S-90) as per Technical Specification Clause 510 & 510.2 with all leads, lifts, loading unloading and octori.(Finished work to be measured, complete)

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 as per Technical Specification Clause 303.1.

PCC wall / Flume

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material in all type of soil upto 3m depth. )including all leads, lifts,etc (Finished work to be measured, complete)

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 (P.C.C Grade M-15 Nominal mix 1:2.5:5), )including cost and carriage of all materials from approved source to site of work,with all leads, lifts, loading unloading and octori.(Finished work to be measured, complete)

Providing steel R.S.Js/built-up steel sections including cutting, welding/rivetting, hoisting, fixing in position for composite girders with shear connectors complete with painting as per drawing and technical specifications Clause 1205.6 including cost and carriage of steel with all leads, lifts, loading unloading and octori.(Finished work to be measured, complete)

Road Furniture

Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703, )including cost and carriage of all materials from approved source to site of work,with all leads, lifts, loading unloading and octori.(Finished work to be measured, complete .) 5th km stone precast

Providing & fixing of traffic sign board as per clause1701.2.3 & IRC-67

Maintenance for Five Years

1st Year

2nd Year

3rd Year

4th Year

5th Year

The Contractor has to quote the rates for Construction part without GST and GST @12% shall be added at the time of Allotment.