Construction of 0.40 Lac gallons SR, 01 No. Sluice Chamber, Operator Quarter near Borewell , Providing and fixing of GI/DI pipes for WSS

Earthwork in excavation by manual means in trenches for foundations, drains, pipes cables etc. (Not exceeding 1.5m in width) and for shafts, wells cesspits and like, not exceeding 10 sqm on plan , depth upto 1.5m incl disposal of excavated earth upto 1mtr. from cutting edge disposed earth is to be levelled and neatly dressed

a) All sorts of Soil

b)Ordinary rock

Earth work in bulk excavation by mechanical means (Hydraulic excavator) over areas Exceeding 30cm in dept, 1.5mtr in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50cm and lift upto 1.50 m, disposal earth to be leveled and neatly dressed

Earth work in excavation by mechanical means (Hydraulic excavator) over areas Exceeding 30cm in dept, 1.5mtr in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50cm and lift upto 1.50 m, disposal earth to be leveled and neatly dressed

All kinds of soil

Providing of Laying of dry stone soiling and packed on level

Providing and laying in position cement concrete of specified grade excluding the cost of pentering and shuttering-All work upto plinth level 1:4:8 (1 cement: 4 coarse sand 8 graded stone aggregate 40mm nominal size) Crushed

Providing and laying in position cement concrete specified grade excluding the cost of pentering and shuttering-All work upto plinth level 1:3:6 (1 cement 3 coarse sand: 6 stone aggregate 20mm nominal size (Crushed)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc Layers not exceeding 20cm in depth, consolidating, each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement-All work upto plinth level 1:2:4 (1) cement 2 coarse sand 4 graded stone aggregate 20mm nominal size) Crushed

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars piers, abutments, posts ans sturts, etc, upto floor five level excluding cost of centring, shuttering, finishing and reinforcement, 1:2:4 (1 cement: 2 coarse sand 4 graded crushed stone aggregate 20mm nominal size) Crushed

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement. 1:2:4 (1) cement 2 coarse sand 4 graded stone aggregate 20mm nominal size) Crushed

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement-All work upto plinth level 1:1.5:3 (1) cement 1.5 coarse sand 3 graded stone aggregate 25mm nominal size) Crushed

Reinforced cement concrete work in walls (any thickness) Ring Beams including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars piers, abutments, posts ans sturts, etc, upto floor five level excluding cost of centring, shuttering, finishing and reinforcement, 1:1.5:3 (1 cement: 1.5 coarse sand 3 graded crushed stone aggregate 20mm nominal size) Crushed

Reinforced cement concrete work in arches, archribs, domes, vaults shells, folded plate and roofs having slope more than 15° upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size)

Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification 1 kg of water proofing material in 50 kg of cement)

Centering and shuttering including strutting, propping etc. and removal of form work for:

Foundations, footings, bases for columns

Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc

Suspended floors, roofs, landings, balconies and slabs.

Edges of slabs and breaks in floors and walls

Domes

Beams

Extra for shuttering in Circular work 20% of basic respective centering and shuttering items.

a)Foundations

b)Walls

c) Beam

Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Reinforcement for R.C.C work including straightening cutting, bending, placing in position and binding all complete, Thermo-Mechanically treated bars.

Surface dressing of the ground including removing vegetation and in-equalities not exceeding15cm deep and disposal of rubbish, lead upto 50m and lift upto 1.5m in all kind of soil.

Brick work with F.P.S bricks of class designaion 75 in foundation & plinth, superstructure upto floor V level in cement mortor (1 cement :6 coarse sand) septic tank

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Providing & laying damp-proof Course 40 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 0.50 mm thick with zinc coating not less than 275 gram/m2

12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 coarse sand)

2mm Cement plaster finished with a floating coat of neat cement of mix: 1 : 3 ( 1 cement : 3 fine sand)

12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand)

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete In all colours, shades, except White, Ivory, Fume Red Brown

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, laid on 20 mm thick cement mortar 1:4 (1Cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete In colour such as White, Ivory, Grey, Fume Red Brown

Providing wood work in forms of door, windows, clerestory windows and other frames, rot framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length( Hold fast lugs or dash fastners) shall be paid seperately Second class Kail wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestor1y windows fixing with butt Hinges of required sizes with necessary screws, excluding panelling which will be paid separately second class kail wood

Providing and fixing panelling or panelling and glazing panelled or panelled and glazed shutters for doors, windows and clerestor1y windows.( Area of opening for panel inserts excluding portion inside grooves or revets to be measured) 25mm to 40mm thick K-wood /imported wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. 5.0 mm thick glass pane (weighing not less than 12.50 kg/sqm)

Providing and fixing ISI marked aluminum butt hinges ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing 40x5mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts, nuts and wooded plugs and emm beedings in cement concrete block 30x10x15cm 1:3:6 mix

Providing and fixing wooden moulded beeding to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. (Second class Teak wood 50x12mm)

Providing and fixing fly proof wire gauze to windows and clerestory windows using wire gauze with average width of aperture 1. N both directions all

internal work concealed fixing the pipe with clamps at 1.00 meter spacing incl, cutting, chasis and making good the wall etc (PN-16 pipe, 32mm od (SDR-7.14)

provding & installalling U PVC pipes (working pressure 4kg / cm square (single socketted pipe 110mm dia with all necessary arrangement and fittings incl, Tees, elbows and ends (caps whereever required complete Job)

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality 20mm nominal bore

Providing and fixing 15 mm nominal bore C.P. brass stop cock of approved quality 20mm nominal bore

Providing & fixing White vitreous china water closet squatting pan(Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge Orissa pattern W.C Pan of size 580x440 mm

Providing and fixing washbasin with CI Brackets, 15mm CP brass pillar taps,32mm CP brass waste of standard pattern including painting of fittings and brackets, cutting and making good the walls wherever required White vitreous china surgeon type wash basin 660x460mm with a pair of 15mm CP brass piller taps with elbow

PVC waste pipe for sink or washbasin Flexible pipe 32mm dia

Providing and Fixing bottle trap for wash basin or sink

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Providing & fixing White vitreous china pedestal for washbasin completely dressed at the back for the reception of pipes and fittings

Providing and installing 25 ltr geyser/water heater with all necessary arrangements

Distempering with 1st quality acrylic distemper (ready mixed)having VOC content less than 50 gms/litre,two or more coats on new work of approved manufacturer, of required shade and colour complete as per manufacturer’s specifications

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick

Providing wood work with deluxe multi surface paint of required shade. Two or more coats applied @0.90ltr/10sqm over and under coat of primer

Providing and fixing Salem Stainless Steel A lSI 304 (18/8) kitchen sink as per I.S. 13983 with C.l. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required: 4 70x420mm bowl depth 178mm

Making plinth protection with common burnt clay bricks of class designation 7.5 laid on edge in cement mortar 1:6 (1 cement : 6 coarse sand) with 12 mm thick bed of cement mortar 1:6 (1 cement : 6 coarse sand) over 75 mm bed of dry brick aggregate 40 mm nominal size, rammed, consolidated, and grouted with fine sand. The top of bricks pointed with cement mortar 1:3 (1 cement : 3 fine sand) and curing completed.

Supplying and stacking at site

63 mm to 45 mm

53 mm to 22.4 mm

13.2 mm nominal size (Type A)

11.2 mm nominal size (Type B)

providing & laying S&S centrifugally cast (spun) Ductile iron pipes conforming to IS:8329 (200mm dia Ductile iron) class K-7 pipes

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) Light

100mm dia

80mm dia

65 mm dia

50 mm dia.

40 mm dia.

25 mm dia.

20 mm dia.

15mm dia

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete

50 to 80 mm nominal bore

25 to 40 mm nominal bore

Providing and fixing D.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. incl, tail pieces as per requirement of site & directions of Engineer In-Charge.

100mm dia

80mm dia

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc.

100mm dia

Providing fixing 12mm flanges to Gi pipe incl, cutting of threaded portion, welding nuts, bolts insertion of rubber Gasket ,laying/ jointing making joint leak proof & testing commissioning incl all Carriages complete job.

Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required (Group B)

Wiring for circuit / submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required

2 x 1.5 sq.mm + 1 x 1.5 sq.mm earth

2 x 2.5 sq.mm + 1 x 2.5 sq.mm earth wire

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface / recess (including cutting the wall and making good the same in case of recessed conduit as required):

Supplying and fixing modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required

5/6 A switch

6 pin 5/6 A socket outlet

15/16 A switch

6 pin 15/16 A socket outlet

Supplying and fixing modular type stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

providing & fixing extra conduit down rod of 20mm dia 2x10cm length wiring with 2x1.5sq mm FRLS PVC insulated, copper conductor, single core cable incl, painting etc as required (Note:More than 5cm length shall be rounded to the nearest 10cm and 5cm or less shall be ianored)

installation testing and commissioning of ceiling fan, incl wiring the down rods of standard length (upto 30cm) with 1.5 sq mm FRLS PVC insulated, copper, conductor, single core cable etc as

Numbering of ceiling fan / exhaust fan / fluorescent fittings as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.(upto 450mm sweep)

Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with IS marked HRC fuses including drilling holes in cubicle panel, making connections etc. as required.

Providing & Installing 8W Round LED Ceiling Light Complete job.

Providing & Installing 200mm Exhaust Fan / Cut Out Size 9.4x9.4 square inches / Watt: 32 / RPM: 1350 / Air Delivery: 520 Ltr/sec suitable for Kitchen, Bathroom, and Office.

Providing & Installing Electric Ceiling Fan (1200mm BEE Star Rated Ceiling Fan)

Carriage of materials by Mechanical Transport incl, loading, unloading & stacking for

Cement/steel for 5kms

Sand for 45kms

20mm aggregate for 15kms

providing & fixing of eaves boarding coloured CGI 300mm wide

40mm aggregate for 15kms

Carriage of materials by Manual labours incl, loading, unloading & stacking avg lead 300Mtrs

Cement

Steel

sand 20mm aggregate

40mm aggregate

Pipe 15 to 100mm dia Gi upto 500Mtrs

B) Mechanical Part

B) Mechanical Part

B) Mechanical Part

B) Mechanical Part

B) Mechanical Part

B) Mechanical Part

B) Mechanical Part

B) Mechanical Part

B) Mechanical Part

B) Mechanical Part

B) Mechanical Part

B) Mechanical Part

B) Mechanical Part

B) Mechanical Part

B) Mechanical Part

B) Mechanical Part

B) Mechanical Part

B) Mechanical Part

B) Mechanical Part

B) Mechanical Part

B) Mechanical Part

B) Mechanical Part

B) Mechanical Part

B) Mechanical Part

B) Mechanical Part

B) Mechanical Part

B) Mechanical Part

B) Mechanical Part

B) Mechanical Part

B) Mechanical Part

B) Mechanical Part

B) Mechanical Part

B) Mechanical Part

B) Mechanical Part

B) Mechanical Part

B) Mechanical Part

B) Mechanical Part

B) Mechanical Part

B) Mechanical Part

B) Mechanical Part

B) Mechanical Part

B) Mechanical Part

B) Mechanical Part

B) Mechanical Part

B) Mechanical Part