SPECIAL REPAIRS TO BLDG NO. T-77, ROOF FALCE CEILING AND CONNECTED WORK OF BLDG NO. P-85 AND PROVN OF LED FLOOD LIGHTS AND POLES AT MIL STN DHRANGADHRA

Amount

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth for foundation of pole,laying of cables etc in hard and dense soil and getting out complete all as specified and directed.

Returning filling in, including spreading, leveling, watering and well ramming in layer not exc 25 cm with soil obtained from excavation complete all as specified and directed.

M&L for providing dry river sand as in sand cushioning to UG cable including punning gently complete all as specified and directed. Note: Depth after punning shall be measured and paid separately.

Removing excavated material (Soil) not exc 50 mtr and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed.

M&L cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundations filling and mass concrete complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate for pedestal/coping around poles, including necessary form work, finishing even and smooth without using extra cement, all as specified and directed.

M&L, in repair, precast cement concrete Block Masonary with solid blocks type C1, 1:3:6 (20mm graded stone aggregate) exc 10 cm in width and setting in mortar 1:6 complete all as specified and directed .

M&L, precast cement concrete Block Masonary with solid blocks type C1, 1:3:6 (20mm graded stone aggregate) exc 10 cm in width and setting in mortar 1:6 except blocks, complete all as specified and directed. Note : Precast cement concrete block masonry obtained vide obave item No. 7 shall be reused.

M&L for RCC 1:1:5:3 type A-1 as in slabs supported on walls, beams and columns in floors, roofs, landings, fixed with tined tacks or galvanized wire staples complete all as specified and directed.

Supply and laying sub class old 'B' burnt bricks, laid as cable protection cover complete all as specified and directed.

M&L for walling of random rubble stone masonry, uncoursed, brought upto courses, well bonded, bedded and solidly hearted, built in CM (1:6) complete all as specified and directed.

M&L for walling of random rubble, except stone, uncoursed, well bonded, bedded and solidly hearted, built in CM (1:6) complete all as specified and directed. Note : Random rubble obtained vide item No. 110 here in after shall be reused.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto course with maximum depression on face from straight edge held against the dressed surface not.exc. 20mm for sand stone complete all as specified and directed.

Rough finished flat form work to soffits of suspended slabs such as roof slabs, floor slabs and similar work not exce 200 mm thick complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sq.m but not exc. 4 sq.m each complete all as specified and directed.

S&F, factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site complete all as specified and directed.

S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specifications complete all as specified and directed.

S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed complete all as specified and directed

S&F, butt hinges, 100 mm long extrucded aluminium alloy with galvanized mild steel hinge pin, anodized and fixed, complete all as specified and directed.

S & F Aluminium handles, cast type, anodised 150 mm long complete all as specified and directed.

S&F, in repair, Hat pegs, solid body 125mm to 175mm cast iron or mild steel fixed with brass screw and wooden/plastic cleats complete all as specified and directed.

S&F, Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed.

S&F, in repair stainless steel tubular towel rail 20mm dia, D type, 600mm long complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56 mm nomonal dia of bar and 1.18 mm avrage width of aperture ,fixed with tined tacks or galvanised wire staples complete all as specified and as directed.

S&F M.S Framed work such as grills gratings etc with ends of bars sholdered and/or riveted into spikes ,framed guard bars /railings all as directed .

M&L for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, 16-20mm dia, length of bolts exc 22cm long but n exc. 30 cm long complete all as specified and directed.

M&L for TMT 10mm dia bar and over, as in stiffeners, cut to length, bent to shape required, including cranking, bending, hooking ends, binding with and incluing mild steel wire(annealed) not less than steel wire 0.9mm dia or securing with clips complete all as specified and directed.

Fixing only rolled mild steel section as in main and cross beams hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates conforming to Fe-290, Gde E-165 all as specified and directed. Note : Steel section obtained vide item No. 114 & 115 here-in-after shall be reused.

S&F, rolled mild steel section as in main and cross beams hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates conforming to Fe-290, Gde E-165 all as specified and directed.

S&F standard aluminium section powder coated any colour as approved for three track window/door frames/shutters sliding/ partitions etc including jointing cleat and rubber eading/linning, Pivot, locking aragement and all hardware etc and fixed in position with stainless steel screws all as specified and as directed.

S&F, plain aluminium sheeting 0.56mm thick, alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and directed.

S&F, pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet, 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

S&F, false ceiling, at any height, 600 x 600mm grid with Armstrong 'Prelude XL 32' grid system and 16mm thick mineral fibre acoustic tile 'RH - 99 Classic lite' with suspension system complete all as specified and per manufacturer's instruction. Make : Armstrong or equivalent as approved by GE.

M&L for false ceiling, consisting of wall angles, main T, cross T all of zise 25mm x 25mm x 1.4mm thick powder coated GI grid frame work jointed angle as directed and mild steel hooks not less than 4mm dia with arrangement for adjesting heights of ceiling with and incl provision of 4mm thick E boards sheet in panels of size 600mm x 600mm with necessary off cuts and fixing arrnagement for ceilling, tube light fitting incl dismantling of existing false ceiling complete all as specified and directed.

M&L in repair to Granite (of any type/colour) work (table rubbed and polished) 10 to 20mm thick in steps, jambs, pillars, window cills, cooking platform and like in CM (1:4) including pointing in white cement (1)2( using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed in CM 1:6 incl moulding, chamgering of edges complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C2, using 40mm graded stone aggregate as in sub base, finishing cement concrete surfaces even and smooth without using extra cement, Joints of plinth protection shall be filled with bitumen mastic (1:3) complete all as specified and as directed.

M&L for 50mm thick cement concrete 1:3:6 type C2, using 40mm graded stone aggregate as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for glazed ceramic coloured tiles joint free, any coloured / shed of size 450mm x 300mm x 7mm on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including rendering 10mm thick in cement mortar (1:4), complete all as specified and directed.

M&L for Non-skid white ceramic tiles 7 to 8 mm thick (square/ rectangular), area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc. set & jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6 complete as specified and directed.

M&L, Non-skid whiteceramic tiles 7 to 8 mm thick joint free tiles, (square/rectangular), area of each tiles exceeding 0.11 sqm but not exceeding 0.18sqm, in floors etc. set & jointed in net cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete as specified and directed.

M&L, Non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular), area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set & jointed in net cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete as specified and directed.

M&L for rubber moulded exterior grade joint less coloured tiles, 10mm thick, area exc 0.06 sqm but n.exc 0.38 sqm with grey cement and pigments set & jointed and pointed in neat cement slurry over and including 15mm thick cement screed bed in cm 1:6 with grey cement and pigments complete all as specified and directed.

M&L for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as sepcified and directed.

M&L for rendering cement plaster 10 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surface on walls complete all as specified and directed.

M&L for rendering cement plaster 10mm thick in cement mortar (1:6) on brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering cement plaster 10mm thick in cement mortar 1:4 on fair faces of concrete in ceilings, chajjas, fins facia etc. complete all as specified and directed.

M&L for 15mm thick cement plaster on fair faces of birck work or concrete surfaces on wall in CM 1:6 finished the plaster surface fair and even complete all as specified and directed.

M&L for 15mm thick cement plaster on fair faces of birck work or concrete surfaces on external surface of wall in CM 1:4 finish the plaster surface fair and even complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for preparation of plastered or unplastered old decorated surfaces of walls by complete removal of existing treatment, moulds, moss and efflorescent salt and treating oil and greasy spot and applying three coat of white wash on walls including cornices etc. complete all as specified and directed.

M&L for preparation fo new plastered surfaces and applying two coat of oil bound distemper over and including a layer of wall care putty to achive a smooth finish surface (average thickness 1mm) complete all as specified and directed.

M&L for preparation fo old plastered surfaces by complete removal of existing treatment and applying two coat of oil bound distemper over and including a layer of wall care putty (average thickness 1mm) complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of white cement primer complete all as specified and directed.

M&L for preparation of old plastered surface of wall and applying one coat of cement base paint complete all as specified and directed.

M&L for preparing new plastered or un-plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.

M&L for preparing old plastered or un-plastered surfaces and applying two coat of white wash on ceilings complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coat of oil bound distemper complete all as specified and directed.

M&L for preparation of old plastered surfaces and applying one coat of oil bound distemper complete all as specified and directed.

S&F, 4.8 mm thick plain sheet glass, ordinary quality and glazing not exceeding 0.8 Sqm in each pane fixed with glass putty complet all as specified and directed.

S&F, in repair, 3 mm thick figured sheet glass, ordinary quality and glazing not exceeding 0.5 Sqm in each pane fixed complete all as specified and directed.

M&L for preparation of old wooden surface of any description, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

M&L, preparation old previously treated steel Surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint on the steel surfaces, complete all as specified and directed.

M&L for cutting of road/PCC for laying of 40mm dia GI pipe for protection of LT cable and making good to match with the existing using extra cement etc. complete all as specified and directed.

S&F, steel water tubes with rubber gasket at end of each pieces of pipe, light grade, galvanized, with all fittings of size 40mm dia laid in floors/trenches/fixed with poles for protection of cable complete all as specified and directed.

S&F, GI tubing, 25mm bore, medium grade, ISI marked with all necessary fittings, laid in trenches/floors complete all as specified and directed.

S&F, GI tubing, 20mm bore, medium grade, ISI marked with all necessary fittings, laid in trenches/floors complete all as specified and directed.

Taking up or down steel tubing and connections for 15mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and directed.

S&F steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 15mm bore of pipe complete all as specified and directed.

S&F steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 20mm bore of pipe complete all as specified and directed.

Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 15mm bore of pipe complete all as specified and directed. Note : Item obtained vide item No. 70 here-in-before shall be reused.

Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 20mm bore of pipe complete all as specified and directed. Note : Item obtained vide item No. 71 here-in-before shall be reused.

M&L, in repair, for RCC NP3 150mm dia pipes laid on 150mm thick PCC Cradle PCC 1:4:8 type D2 bed with excavation in depth 0.70m - 1.65m in any type of soil, including manholes/drop manhole of standard size made of Brick masonry/RCC/Precast RCC with DFRC ventilating cover and frame includes all items and activities to execute and make sewer line functional. Note : Rates for RCC pipe in repair alongwith PCC 1:4:8 type D2 bed deemed to be included in quoiting other items shall be measured and paid seperately.

S&F, in repair, rotational moulded polyethylene water storage tanks of capacity 1000 Litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR-Part-I complete all as specified and directed.

S&F, in repair, 15mm dia Brass CP bib cock cast copper alloy, fancy type with long shank capstain head serewed down high pressure pipe in repairs complete all as specified and directed.

S&F, in repair, pillar taps fancy type cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed 15 mm bore dia complete all as specified and directed.

S&F, in repair, 15mm, stop valve/angle valve, cast copper alloy, chromium plated, fency type with crutch or butterfly handle screw down, serewed for iron pipe or brass ferrule complete all as specified and directed.

S&F, in repair, 15mm dia stop valves cast copper alloy fancy type chromium plated with long shank and cup (conceled type) screwed down, high pressure with capstain head , screwed both ends, fixed complete all as specified and directed.

S&F, in repair, Gun metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe for 20 mm bore of pipe complete all as specified and directed.

S&F, Gun metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe for 25 mm bore of pipe complete all as specified and directed.

S&F, 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.(Minimum weight -210 Gms) complete, all as specified and directed.

S&F, in repair, 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.(Minimum weight -210 Gms) complete, all as specified and directed.

S&F, Towel Rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minium weight 190 gms) complete all as specified and directed.

S&F, PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F, 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors/ walls complete all as specified and directed.

S&F, 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors/walls complete all as specified and directed.

S&F, 110mm bore PVC (SWR) bend, any radius complete all as specified and directed.

S&F, 75mm PVC (SWR) vent cowl complete all as specified and directed.

S&F in repairs, 125/110mm bore PVC (SWR) 'P' trap complete all as specified and directed.

S&F PVC (SWR) nahani trap, with chromium plated grating including jointing with solvent cement, dia of outlet 75mm complete all as specified and directed.

S&F, in repair, vitreous china wash down water closet pan (pedestal pattern), white (excluding flushing cistern) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. including seat cover in same colour etc. complete all as specified and directed.

S&F in repair vitreous China squatting pan 'Orissa pattern' size 580x440 mm, white with integral foot rest including 'P' or 'S' trap front or back inlet excluding flushing cistern and flush pipe including connection to trap and flushing pipe etc and making good to floor complete all as specified and directed.

S&F, in repairs, Two way bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down screwed for iron pipe or brass ferrule for 15mm bore of pipe complete all as specified and directed.

S&F, in repair vitreous china counter top wash basin oval shape, size 550 x 400mm including PVC waste coupling fixed complete all as specified and directed.

S&F, chromium plated brass peg set of six fixed with brass screw and wooden/plastic cleats.

S&F, in repairs, vitreous china urinal, Half stall type, white (excluding flushing pipe) incl providing and fixing plug, bedding urinal against wall in CM (1:2), securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in cement, fixing flush pipe, gratings and union for discharge pipe incl supply and fixing of 32mm bore 60mm long discharge pipe complete all as specified and directed.

S&F, chromium plated over head shower 125mm size with or without swivel joints, including fixing to pipe or union complete all as specified and directed.

S&F, in repair, 10 litres capacity, valveless, syphonic action type, flushing cistern, including 32mm dia PVC flush pipe complete all as specified and directed.

S&F, in repair Toilet paper holder with flat recessed type stainless steel complete all as specified and directed

S & F in repairs white glazed earthen ware vitreous china wash hand basin of size 550x400mm with and including CI brackets, 32mm bore brass CP waste coupling Inlet/ outlet, PVC flexible pipe, 600mm size for 15 mm bore pipe with brass nut and washers etc complete.

S&F, Soap dish, approximate size 160 x 160 x 90mm, fixed with screws complete all as specified and directed.

S7F, 5.5mm thick glass shelf of size 600mm long fency type fixed and including chromium plated grils, screws and wooden/plastic cleats complete all as specified and directed.

S&F, 5.5mm thick glass shelf assembly fency type size 250mmx250mm fixed with and including chromium plates brass screws and wooden/plastic cleats complete all as specified and directed.

S&F, Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc. 15cm thickness (below or above ground level) all as specified and directed.

M&L for demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of reinforced cement concrete in any position not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed

Dismantling structural steel work including door , gatesbut excluding framed truss etc complete all as specified and directed.

Dismantling of Asbestos cement (corrugated, semi corrugated, etc) sheet in roof covering

Dismantling wall and ceiling boards, partitions of any description or in any position (fibre, pulp, insulation etc.) any thickness, or insulation boards/ slabs/ blankets of any thickness including cover fillets complete all as specified and directed.

Taking down carefully copper/aluminum point wiring (light, fan,socket or power) complete,including fixture and fitting such as as switches, ceiling roses, pendants, regulators, sockets,etc excluing light fittings etc,removing materials to store for keeping in safe custudy or for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surface of walls, ceiling, floor etc to match with the existing surface complete all as specified and directed.

M&L for concealed type point wiring for modular points with 1.5 Sqmm (nominal area) PVC insulated, unsheathed, stranded copper conductor cable FRLS (1100 Volts grade) drawn in and including, medium grade PVC conduits of not less than 25mm dia with all fittings and accessories, fire resistant, ISI marked including with its fittings and fixtures such as TEES, bends, elbows, junction boxes etc. PVC insulated cable with copper conductor of size 1.5 Sqmm as earth continuty conductor including fixing of modular white cover plate with frame, 1.2 mm thick modular metal flush box concealed type for housing modular switches complete MS modular sunk terminal box duly flushed to wall fixed complete making good the disturbed surfaces complete all as specified and directed. Note : (i) The cutting chases in the wall/ stone masonary shall be deemed in the quoted rate. (ii) The disturbed surfaces of wall shall be made good with including matching the surfaces with existing finishes and to the entire satisfaction of Engineer-in-Charge.

(a) One light/fan point controlled by one switch

(b) One light point controlled by two, 2 way switches

(c) One multi purpose socket 5 Amps, on the same board.

(d) One multi purpose socket 5 Amps, Independent board.

(e) One 3 pin socket outlet, 6/16 Amps, independent, with cables 2.5 Sqmm size

M&L for poing wiring with and including multistranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number drawn in and including medium grade PVC conduits of not less than 25mm in size, ISI marked including with its fittings and fixtures such as tees, bends, elbows, junction boxes etc. PVC insulated cable with copper conductor of size 2.5 Sqmm as earth continuty conductor including fixing of modular white cover plate with frame, 1.2 mm thick modular metal flush box concealed type for housing modular switches 15 Amps socket outlet point on independent board complete all as specified and directed. MS Modular sunk terminal box duly flushed to wall fixed complete making good the disturbed surfaces. complete making good the disturbed surfaces. Note : (i) The cutting chases in the wall/ stone masonary shall be deemed in the quoted rate. (ii) The disturbed surfaces of wall shall be made good with including matching the surfaces with existing finishes and to the entire satisfaction of Engineer-in-Charge.

M&L for poing wiring with and including multistranded copper conductor 4 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number drawn in and including medium grade PVC conduits of not less than 25mm in size, ISI marked including with its fittings and fixtures such as tees, bends, elbows, junction boxes etc. PVC insulated cable with copper conductor of size 4 Sqmm as earth continuty conductor including fixing of modular white cover plate with frame, 1.2 mm thick modular metal flush box concealed type for housing modular switches 15 Amps socket outlet point on independent board complete all as specified and directed. MS Modular sunk terminal box duly flushed to wall fixed complete making good the disturbed surfaces. complete making good the disturbed surfaces. Note : (i) The cutting chases in the wall/ stone masonary shall be deemed in the quoted rate. (ii) The disturbed surfaces of wall shall be made good with including matching the surfaces with existing finishes and to the entire satisfaction of Engineer-in-Charge.

S&F, in repair, lamp holder, insulated body with back plate for batten fittings complete all as specified and directed.

S&F modular switch piano, flush type 6 Amps one way 230 volts complete all as specified.

S&F modular switch one way 16 Amps flush type 230 volts complete all as specified.

S&F, in repair, modular switch, 2 way, 6 Amps complete all as specified and directed.

S&F, modular bell push6 Amps, 1 module complete all as specified and directed.

M&L for bell electric, dingdong type AC 230 Volts, single pole complete all as specified and directed.

S&F modular socket outlet 2-3 pin 6 & 16 Amps flush type 230 volts complete all as specified.

S&F, modular fan step type regulator, suitable for 1200mm/1400mm sweep ceiling fan, 2 module complete all as specified and directed.

S&F Socket outlet 3 pin 6 Amps flush type 230 volts complete all as specified.

S&F Ceiling rose 3 terminal size 50x65mm surface type 230 volts complete all as specified.

S&F, modular fan step type regulator, suitable for 1200mm/1400mm sweep ceiling fan, 2 module complete all as specified and directed.

Taking down existing ceiling fans completewith down rods and refixing the same with supply of new down rod of size 15mm dia made of GI pipe med grade approx 1 metre length incl flexible wire all as specified and directed.

S&F, in repair, Box type LED light fitting 1 x 20W, 230 V, surface mounting white powder coated CRCA sheet steel housing with crescent light opening in a perforated metallic frame complete with 20 W LED tube rod complete with all accessories presired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as directed.

S&F, in repairs, LED light fitting, batten type, housed in extruded from powder coated aluminium, 10 watt for soft diffuser lighting with and including lamp and connecting up complete with white PVC insulated and PVC sheathed round flexible three core copper conductor cable of suitable size and testing on completion all as specified and directed.

S&F security light luminaries 25 watt with wall mounting bracket of suitable size and clamps, nut bolts etc.having pressure die cast housing with epoxy power coated dark graphite grey colour finish,prismatic polycarbonate cover with individual LED lenses-IP65 prewired Conforming to Crompton of equivalent make of wipro/Havells/Bajaj/ wipro.

S&F 30W New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 for bldg security light with GI pipe bracket of suitable size for fitting complete all as specified and directed by Engineer-in-charge. Make : Havells/Bajaj/Philips/Crompton

S&F, LED compact fitting/batten for single LED tube of 1x20W, 220 V AC decorative box type 4 ft with integral LED driver including 20W, T8 tube rod connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F, LED flat panel of size 2' x 2' luminaire of 34 watt, environmental friendly, new generation, aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for Armstrong/Grid Ceiling complete all as specified and directed.

S&F, LED flood light luminaries 150 Watt, comprising pressure die cast aluinium housing with pre-sired gear tray with LEDs and driver, head resistant, flat glass suitably gasketed for IP-65 protection, colour temperature 5700K to 6500K, CRI>70 complete with all accessories pre-wired, fixed on existing bracket with and including necessary reducer/nut/boldt/drilling hole in pipe as per site requirement and making connections with PVC copper wire complete all as specified and directed.

S&F, Street light cable junction boxes IP55/IP65 with metric knowkout for cable entry made out of SMC material, shock & dust proof of inside size 250 x 200 x 100mm as per IS and including TPN aluminium busbar fixed on insulators, 01 Noo. 6 A sP MCB, earth termination with nuts & bolts, and including 02 sets of 25x6mm flat iron cllamps with nuts, bolts and washers including 02 coats of aluminium paint over a coat of primer for flat iron all as specified and directed as per Cat Part No. GSMB 2520 of SINTEX or equivalent make as approved by GE.

M&L for steel tubular swaged poles complete with cast iron base plate, final taper plug, bolts, nuts & screws as specified type 410 SP-44 (10 metres long) including numbering of poles with aluminium paint and painting up to 1.5 meter above PCC benching of poles in black and white strips 5 number complete all as specified and directed. (Excavation, earht work, foundation concrete and coping etc will be measured and paid seperately).

M&L for Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections suitable for mounting flood light, including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint

Supplying & laying, XLPE insulated PVC inner sheathed, 6 Sqmm, 2 core, armoured with galvanised steel strip or wire heavy duty underground cable with aluminium multi stranded conductor, 1100 volt grade, laid in trenches/duct, passing through pipe/duct or fixed on pole and connecting and testing complete all as specified and directed.

Supplying & laying, XLPE insulated PVC inner sheathed, 6 Sqmm, 4 core, armoured with galvanised steel strip or wire heavy duty underground cable with aluminium multi stranded conductor, 1100 volt grade, laid in trenches/duct, passing through pipe/duct or fixed on pole and connecting and testing complete all as specified and directed.

Supplying & laying, XLPE insulated PVC inner sheathed, 10 Sqmm, 2 core, armoured with galvanised steel strip or wire heavy duty underground cable with aluminium multi stranded conductor, 1100 volt grade, laid in trenches/duct, passing through pipe/duct or fixed on pole and connecting and testing complete all as specified and directed.

Supplying & laying, XLPE insulated PVC inner sheathed, 10 Sqmm, 4 core, armoured with galvanised steel strip or wire heavy duty underground cable with aluminium multi stranded conductor, 1100 volt grade, laid in trenches/duct, passing through pipe/duct or fixed on pole and connecting and testing complete all as specified and directed.

S&F, sheet metal enclosures, single pole & neutral with a two pin & earth plug and socket complete with one single pole, MCB of 20 Amps, 10 KA, 240 volts complete all as specified and directed. Make ;Legrand / Havells/ standard.

S&F,DB with metal plug and socket double pole with MCB SP 20 Amps 230V, 10 KA complete all as specified and directed.

S&F Sheet metal enclosure double door for DB's SPN 8 way 240 V having 200 A rated bus bar complete all as specified and directed by Engr-Incharge.

S&F, in repair, Distribution Board SPN 12 way, 240 volts, 200 A factory made powder coated, double door with neutral and earth link, suitable for fixing MCB,s complete including connecting all as specified and directed.

S&F Sheet metal enclosure double door for DB's TPN 4 way 415V having 200 A rated bus bar complete all as specified and directed by Engr-in-charge.

S&F, ceiling fans 1200mm sweep energy efficient five star rated 230 volts with brushless direct current motor (BLDC) with blades, down rods, electronic regulator control type and accessoried and connecting up with 3 runs of suitable size single phase PVC insulated unsheathed, FRLS cable with multistanded copper conductors from ceiling rose to fan complete all as specified and directed.

Supply and fix of exhaust fan, 230 mm sweep, 1400 rpm, MS body heavy duty, AC single phase, 230 volts with, blades, and frame and louvers including connection with 0.5 sqmm multistranded copper conductor flexible wire from ceiling rose, necessary fixing arrangement i.e anchor nut, bolt, washer, grouting and making good to disturbed surface complete all as specified and as directed. Make : Crompton/Havells/Khaitan/Almonard/Bajaj

Labour only for cutting opening through brick walls for fixing of exhaust fan, including providing fixing and removing shoring cleaning and stacking bricks, removing surplus serviceable bricks, hard core etc. rubbish not exc 50m. forming jambs etc. to opening for 250/300/380mm exhaust fan including cutting tin wall for cement mortar 1:6 toothing and properly bonding into old work, also facing, jointing and pointing to match the existing work complete all as specified and directed

Supply and fix of exhaust fan, 250 mm sweep, PVC body, AC single phase, 230 volts with, alongwith louvers and blades including connection with 0.5 sqmm multistranded copper conductor flexible wire from ceiling rose, necessary fixing arrangement i.e anchor nut, bolt, washer, grouting and making good to disturbed surface complete all as specified and as directed. Make : Crompton/Havells/Khaitan/Almonard/Bajaj

Taking down carefully old unserviceable main switches/ Distribution board any type including fuses MCB etc after removing all connection and making good the disturb surface all as directed by Engineer-in-charge.

Taking down carefully old UNSV submain wiring of any type/any size removing material to store for keeping in safe custody or for taking credits and making good the disturbed surfaces of walls, floors, etc complete all as specified and directed.

M&L in replacement sub-main wiring with 2 single core 4 Sqmm PVC insulated, unsheathed, 1100Volts grade, copper multi stranded conductor drawn in and including PVC concealed conduit and conduit assessories including drawing a run of PVC insulated, unsheathed, 650/1100Volts grade, copper conductor multi stranded 4 Sqmm size as continuous earth wire drawn through and connected to main switch/ DB and testing on completion. Note: (i). 2 run of main conductor and one run of earth conductor shall be measured as one length. (ii) Rates quoted shall be inclusive of cutting wall for concealing conduit and making good the same in cement mortar 1:3.

M&L in replacement sub-main wiring with 4 single core 4 Sqmm PVC insulated, unsheathed, 1100Volts grade, copper multi stranded conductor drawn in and including PVC concealed conduit and conduit assessories including drawing a run of PVC insulated, unsheathed, 650/1100Volts grade, copper conductor multi stranded 4 Sqmm size as continuous earth wire drawn through and connected to main switch/ DB and testing on completion. Note: (i). 2 run of main conductor and one run of earth conductor shall be measured as one length. (ii) Rates quoted shall be inclusive of cutting wall for concealing conduit and making good the same in cement mortar 1:3.

S&F, 2.5 Sqmm (Nominal area) 2 core, multi-stranded copper conductor, PVC insulated sheathed, FRLS cable drawn in steel pole for connection to street/flood light fitting and making connection complete all as specified and directed.

S&F, MCCB enclosure with MCCB of capacity 63 A, 16 KA, 415 Volts complete all as specified and directed.

S&F, MCB, SPN, type curve B 10 KA, 40 Amps 230 Volts complete all as specified and directed.

S&F, in repair, MCB’s SPN 32 Amps 240 volts with ‘C’ curve, fixed in sheet metal board complete including connecting.

S&F MCB, type curve B, 10 KA, SP, 6-32A, 240 Amps complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth Lead 4 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR Part I connected to earth test point using earth strip of 25x4mm as earth lead all as specified and testing on completion including provision of earth lead protected by 20 mm dia light grade GI pipe & watering pipe shall be 15 mm bore medium grade GI pipe including all excavation and earth work in any type of soil, PCC pit with RCC cover, char coal, salt, funnel etc complete. Note : Rate quoted by tenderers shall be deemed to include for following provisions:-[i]. Excavation & earth work in any type of soil including removing of surplus material upto 50 M.[ii]. PCC 1:3:6 type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50x50 cm with 8mm TMT bars @ 10 cm C/C both ways with handles.[iii]. Main earthing lead from earth electrode to test point upto 7.5 mtr.[iv]. Funnel with watering pipe [GI pipe] 15 mm bore [ISI marked] medium grade & copper lugs, charcoal & salt as reqd.[v]. GI protection pipe of size 20 mm bore light grade 7.5m.

Bhumi Construction

Shivaang Enterprise

ALBA AC AND REF SERVICES

M/S HARI CONSTRUCTION

Ramdev and Sons

Singh Engineer And Contractor