15/EWC(B)/2019-20

Amount

Carriage of following line materials for 33 KV line from any Store Centre of Electricity store division bareilly to the site of work including measuring, weighing, loading, unloading at both ends and proper stacking at safe site.

STP 11Mtr. long

ACSR dog conductor

33 KV 3x300mm XLPE Cable

Supply of following material :

M.S. Channel 125x65mm (For line isolator, post insulator, CT stuctures & 13 No. Top channel of length 3200mm with clamp, nut & bolts)

M.S angle lron 65x65x6mm for bracing & guarding (5.8 kg. per Mtr.) :

MS Angle 65x65x6mm bracing for PCC pole 2700mm with clamp, nut & bolts

MS Angle 65x65x6mm bracing for ST pole 4300mm with clamp, nut & bolts

MS Angle 65x65x6mm for guarding 1600mm with clamp, nut & bolts

M.S. Angle 75x75x6mm (For line isolator, post insulator & CT stuctures)

M.S. Angle 50x50x6mm (For line isolator stucture)

33 KV 400A Line type Isolator ( sl No.69 )

33 KV Post insulator

33 KV VCB 800A 750 MVA

33 KV control pannel for feeder

33 KV O/D CT CTR 400/200/1-1-1A

Cross Arm Channel 100x50mm V type

33 KV Pin insulator

33 KV Pin with nut

11 KV Disc insulator B&S type 7000 kg.

Disc fitting Dog/raccon 7000kg.

33 KV 3x300mm cable joitng kit O/D

33 KV 3x300mm cable joitng kit S/Through

G.I. Wire 8 SWG (for guarding & earthing)

PCC pole 9mtr. Long

MS Earthing rod of size 2500x20mm

Stay set complete

F- bracket for 33 KV

33 KV E- bracket with bolts & nuts (for D/P, T/P & F/P)

Packing piece & clamp for cross arm with nut & bolt

Cross arm holding clamp with nut & bolts

Stone pad

Number Plate with clamp, nut & bolts

Danger plate with clamp, nut & bolts

Berbed wire

Nut bolt & washer off size

P.G. Clamp

Turn buckle

Eye bolt

Stay insulator for 33 KV

Erection of following material :

M.S. Channel 125x65mm (Top channel of length 3200mm with clamp, nut & bolts)

M.S angle lron 65x65x6mm for bracing & guarding (5.8 kg. per Mtr.) :

MS Angle 65x65x6mm bracing for PCC pole 2700mm with clamp, nut & bolts

MS Angle 65x65x6mm bracing for ST pole 4300mm with clamp, nut & bolts

33 KV Control panel for single feeder

Cross Arm Channel 100x50mm V type

33 KV Pin insulator

33 KV Pin with nut

11 KV Disc insulator B&S type 7000 kg.

Disc fitting Dog/raccon 7000kg.

33 KV 3x300mm cable joitng kit O/D

33 KV 3x300mm cable joitng kit S/Through

F- bracket for 33 KV

33 KV E- bracket with bolts & nuts

Packing piece & clamp for cross arm with nut & bolt

Cross arm holding clamp with nut & bolts

Stone pad

Number Plate with clamp, nut & bolts

Danger plate with clamp, nut & bolts

Berbed wire

Nut bolt & washer off size

P.G. Clamp

Turn buckle

Earthing (well type bore of S/S switch yard) L.A./VCB/Transformer for LILO System. welding & laying of G.S. strip 50x6mm size with structures and all equipments in switchyard and control room,(GI pipe, GS strip, earthing rod will be provided by the contractor).

Fabracation, erection, painting and grouting of the following structures as per RESSPO/ Approved Drawing and its, plinth 45cm above ground leval as directed by the Engineer Incharge (all type of material such as: cement, brick balast, sand, paint will be provided by the contractor).

Line Isolator Structure

Post Insulator Structure

33 KV VCB Structure

33 KV CT Structure

Mounting and installation, including Mechnical & electrical fixing and adjusting of the following equipments on their respective structures including proper adjustment:

33 KV Isolator Line side

33 KV Post insulator

33 KV VCB complete

24 V Battery set with charger (To be provided by firm I.S.I. mark only of DC System with one float cum boost charger & battery set for 24V. System with 150A.H. Capacity with cabinet).

Complete laying and termination of copper control cable from LILO System, 33 KV CT and 33 KV VCB in the out door switch yard in the relay control panel inside the control room including cost of all materials and labour required for proper completion of works as per RESSPO drawings.

Laying of dog conductor alongwith cost of all required calmps and connectors etc. as per RESSPO Approved drawing of LILO System. All type of connector, nut & bolts will be provided by the contractor)

Erection of the following supports after making of holes with fitting of all accessories clamps etc, grouting of poles as per RESSPO norm & plinthing of support above 300mm gound level by concreating of ratio 1:4:8 (cement brick balast & sand) as per RESSPO norm & painting of ST Pole structure as per norms (all type of paints & red oxide primer will be provided by contractor).

Single support of ST Pole 11mtr long.

Single support of PCC Pole 9mtr long.

Double pole structure on ST Pole 11mtr long complete with bracing.

Double pole cable exposer structure on ST Pole 11mtr long complete with bracing.

End type double pole on ST Pole 11mtr long complete with bracing

Double pole structure on PCC Pole 9mtr long complete with bracing.

Tri pole structure on ST Pole 11mtr long complete with bracing.

Tri Pole structure on PCC Pole 9mtr long complete with bracing.

Four Pole structure on ST Pole 11mtr long complete with bracing.

Four Pole structure on PCC Pole 9mtr long complete with bracing.

Erection/fixing of stay set with stay wire, stay insulator and clamp as per RESSPO drawing including binding, clambing, clamping, tightening, and nozzeling etc. complete in all respect including its grouting in ratio 1:4:8 of cement, sand and brick ballast and sand before back filling of the pits as per RESSPO schedule all clamps, nuts & bolts, cement, brick, concrete blast and etc would be provided by contractor.

Laying and sagging of 3 phase ACSR Dog conductor from Double pole at 33/11 KV substation Eintgaon to tapping point on existing 33 KV Kareli line including jumpering, hoisting, fixing of all type of insulators, binding, jointing and its clamping etc. in all respect.

Guarding of HT/LT/Telephone line/ road/river crossing etc. by providing G.S earth wire 7/16 SWG/GI wire No. 8 and making net with difference of 1.00 Mtr. Completely including fixing of channel/angle etc. with proper locking at each support. All type of nut & bot would be given by the contractor.

Earthing of each S.T Poles of the line is to be done by driving the MS earthing rod 2500x20mm below 0.5 Mtr. In the ground and properly connected to each support with G.S Flat 35x5mm by electric welding process with M.S earthing rod. Earthing plate welding point with support must be 0.15Mtr.above from the plinth of the support,Earthing of each section pole is also to be done. All type of nut & bot would be given by the contractor.

Earthing of each PCC pole of the line by driving the M.S, Earthing rod 2500x20mm below 0.5 Mtr in the ground and properly connected to all metallic parts of the support by GI wire 8 SWG. Earthing of each double pole is also to be done. All type of nut & bot would be given by the contractor.

Laying of single circuit 33 KV 3X300 Sq. mm XLPE cable in normal soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, 1st class bricks, stone slab. (Brick trench material including sand will be supplied by the contractor).

Laying of double circuit 33 KV 3X300 Sq. mm XLPE cable in normal soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, 1st class bricks, stone slab. (Brick trench material including sand will be supplied by the contractor).

Cable laying by drill method single circuit without MS Pipe.

Cable laying in MS Pipe by drill method single circuit (MS pipe will be supplied by the contractor).

Cable laying in HDEP Pipe 150mm dia for single circuit (for 33 KV Cable of size 3x300sqmm) (MS pipe will be supplied by the contractor).

Hoisting of 33 KV 3X300 Sq. mm. XLPE cable on double pole with GI pipe of size 6" dia 3 M long including its jumpering complete with clamps, nuts and bolts (Hoisting material will be supplied by the contractor).

Clearing of the line route by cutting of tree branches during erection of line and also upto the time of energisation completely as per direction of Incharge.

BHARAT ELECTRICAL TRADERS

Anil Kumar Yadav