Loading…
Loading…
Tender ID
Tender Value
₹2.1 L
EMD Value
₹3,000
Closing Date
8 Apr 2026, 4:00 pmClosed
Deputy Executive Engineer
Repairs to E.I. & Compound of Additional District & Session Court Building At Dabhoi, Dist. Vadodara.
292510
SDC 01-02
Open
Electrical - All
Works
Vadodara
7 documents required · 7 mandatory
₹600
The Executive Engineer, Vadodara Electrical Division
₹3,000
1 Apr 2026
1 Apr 2026
1 Apr 2026
8 Apr 2026
1 Apr 2026
Name Of Work : Repairs to E.I. & Compound of Additional District & Session Court Building At Dabhoi, Dist.
Qty. Unit Item Per Amount
In Figure In Words
19 Pt. 1a Replacing old & us Point of by Point wiring for 459.55 Rupees Four Pt.
Light / Bell with 2-1.5 sq.mm & earth wire of hundred Fifty Nine
1.5 sq.mm (Green) both are of ISI marked 1.1 Paise Fifty Five
KV grade FRLS PVC insulated multi strand Only
copper wires up to 10 mtr length , in below type
of pipe erected with 6A Modular type switch /
bell push & accessories and earth continuity of
following type, erected on PVC /
Metallic/Wooden box, single mounting base
frame covered with textured/metallic/white
front plate modules erected on / in wall /
ceiling as per pipe erected, with necessary
Lamp holder/ceiling rose / H.D.Connector as
directed.(a) with medium class Rigid PVC pipe
and accessories erected flushed on wall/ceiling
complete. Cat-III
7 Pt. 1b For Toilet Block Ca-III 224.73 Rupees Two Pt.
Seventy Two Only
4 Pt. 2 Point wiring for on board Looped Plug with 6A 257.55 Rupees Two Pt.
Modular type switch & 5 pin socket erected on hundred Fifty
PVC / Metallic/Wooden box, single mounting Seven Paise Fifty
base frame covered with textured / Five Only
metallic/white front plate modules erected on
/ in wall / ceiling with following type
accessories. Ca-III
105 Mtr. 3 Replacing old & u/s. Mains by Providing and 82.82 Rupees Eighty Mtr.
erecting Mains with 1.1 KV grade FRLS PVC Two Paise Eighty
insulated ISI marked stranded Copper Two Only
conductor wire in following type of pipe to be
erected concealed in /flushed on wall/ceiling,
with 1.5 sq. mm copper conductor FRLS PVC
insulated stranded wire of green colour for
earth continuity of following siz.(A) With
medium class Rigid PVC pipe and
accessories.(b) 2 wire 2.5 sq. mm
95 Mtr. 4 Replacing old & us 3 core round cable by 46.46 Rupees Forty Six Mtr.
Supplying and erecting Flexible PVC insulated Paise Forty Six
multi strand multi core 1.1 kv grade ISI marked Only
copper wires of following size to be erected as
directed.(e) 1.50 Sq.mm 3 core round PVC
2 Nos 5 Providing & erecting Switch board for 1133.22 Rupees One Ea
Computer or electric apparatus consisting of Thousand One
following modular type accessories mounted hundred Thirty
with PVC / Metallic concealed/open box with Three Paise
single mounting base frame covered with Twenty Two Only
textured/metallic /white front plate,modules
erected with necessary connections as
directed1 no. 6A/16A universal plug-switch
combined.3 nos. 6A Switch3 nos. 6A 5 pin
Plug.For Modular Type Accessories Cat-III
ESTIMATE FORMET Page 1 of
Qty. Unit Item Per Amount
In Figure In Words
2 Nos 6 Supplying and erecting LED indoor fittings with 535.30 Rupees Five Ea
LEDs of wattage 0.2 Watt to 0.5 Watt hundred Thirty
assembled on single MCPCB, with housing Five Paise Thirty
used as a heat sink shall be made of thick Only
sheet Steel conforming to IS: 513/CRCA/
aluminium die cast powder coated and high
U.V. & corrosion resistance with diffuser with
company mark/name 160V to 270V, Power
Factor more than 0.95, THD < 15%,CCT
K to 6500K, Luminaire efficacy>
lumens/watt ,LED LED driver efficiency >
%( fitting required LM-79 & LM-80
Certificates)(NOTE: Below description have
shown ranges of Wattage capacity of LED
fittings.The Engineer incharge may select any
wattage capacity between the ranges shown.)
(A) Tube Light with integral driver (v) 36-40
Watts, Surge-2 KV, IP-20, conventional 4 feet
7 Nos 7 Supplying and erecting led lamps with following 112.11 Rupees One Ea
wattage capacity of 220 to 240 voltage, hundred Twelve
minimum 15000 burning hours life, 500 V in Paise Eleven Only
built-surge protection,Polycarbonate diffuser,
mounting suitable for E14 / E27 / B22 lamp
holders, pf >= 0.5. (A) LED Lamps integral
type, with PC diffuser suitable LAMP holder.
(ii) 5 to 8 watts. Ca-III
10 Nos 8 Supplying and erecting LED indoor fittings with 613.07 Rupees Six Ea
LEDs of wattage 0.2 Watt to 0.5 Watt hundred Thirteen
assembled on single MCPCB, with housing Paise Seven Only
used as a heat sink shall be made of thick
sheet Steel conforming to IS:
513/CRCA/aluminium pressure die cast
powder coated and high U.V. & corrosion
resistance with diffuser housed in aluminium
casted body with company mark/name 160V to
270V,Power Factor more than 0.95, THD <
%,CCT 3000 K to 6500K, Luminaire efficacy>
85 lumens/watt ,LED driver efficiency > 85 %
(fitting required LM-79 & LM-80
Certificates)(NOTE: Below description have
shown ranges of Wattage capacity of LED
fittings.The Engineer incharge may select any
wattage capacity between the ranges shown.)
(B) LED Panel Light with provision for Plane
front frame with translucent cover fixed to
housing complete.IP20 (iv) 18 to 20 watts, 8" x
8", Surge- 2 KV Ca-III
ESTIMATE FORMET Page 2 of
Qty. Unit Item Per Amount
In Figure In Words
20 Nos 9a Replacing old & u/s. 36 W Wall & Pole 3345.12 Rupees Three Ea
Mounted Street Light Fittings by Supplying and Thousand Three
erecting LED street light / Flood light fittings hundred Forty
with High power White LEDs wattage of 3 Watt Five Paise Twelve
and above assembled on single MCPCB, Only
efficiency more than 130 lm/w and corrosion
free High pressure die cast aluminum housing
with smooth finish powder coated and heat
sink extruded aluminium with diffuser and
Polycarbonate optics/ lenses, with toughened
glass with company mark/name engraved or
embossed 160 to 270 V,Power Factor more
than 0.95, THD < 10 %, CCT 3000 K to
5700K,Uniformity ratio >0.45, Luminaire
efficacy> 100 lumens/watt . LED driver
efficiency > 85 %. (fittings required LM-79 &
LM-80 certificates) (NOTE: Below description
have shown ranges of Wattage capacity of
LED fittings.The Engineer incharge may select
any wattage capacity between the ranges
shown.) (A) Street Light (IP-65), Surge
protection -4KV integral and ,Light must have
440VAC line supply with over-voltage
protection. (i) 45 watts Ca-III
5 Nos 9b (B) Flood Light (IP-65), Surge protection -4KV 7266.95 Rupees Seven Ea
integral and ,Light must have 440VAC line Thousand Two
supply with over-voltage protection. (iv) 120 hundred Sixty Six
watts. Ca-III Paise Ninety Five
4 Nos 9c (C) Post Top Lantern LED fitting comprises of 4819.72 Rupees Four Ea
finish cast aluminum spigot and spun Thousand Eight
aluminum canopy fixed with opal hundred Nineteen
polycarbonate, pipe arrangement for vertical Paise Seventy
mounting driver and accessories wired upto Two Only
terminal block.IP 65 (b) 40 W Ca-III
29 Nos 10 Replacing old & u/s. SP MCB by Providing and 270.68 Rupees Two Ea
erecting Miniature circuit breaker single pole hundred Seventy
0.5A to 2A system and having breaking Paise Sixty Eight
capacity 10 KA to be erected in existing box. Only
confirming to IS 8828/1996 with ISI Mark. Ca-III
1 Nos 11 Replacing old & u/s. FP MCB by Providing & 638.32 Rupees Six Ea
erecting 415V MCB Four Pole Switch for hundred Thirty
Lighting Load (B curve) having 10KA breaking Eight Paise Thirty
capacity & confirms to IS :8828 in existing box Two Only
having following capacity.(b) 40 Amp.Cat-III
3 Nos 12 Providing and erecting Pipe type earthing 368.65 Rupees Three Ea
having 150 cms.long and 2.5 cms. dia. hundred Sixty
galvanised iron pipe with coupling and buch Eight Paise Sixty
buried in specially prepared earth pit complete Five Only
with necessary 8 SWG earth wire.
3 Nos 13 For using salt and charcoal / coke as required 171.70 Rupees One Ea
for pipe type earthing. hundred Seventy
118 Mtr. 14 Replacing old & u/s. Cables by Providing and 126.25 Rupees One Mtr.
erecting XLPE (IS:7098)(I)-88 ISI armoured hundred Twenty
cable multistrand / Solid Aluminium conductor Six Paise Twenty
for 1.1 KV. to be laid on wall with necessary Five Only
clamps or in existing trench / pipe of following
size of cables. (B) 4 core 6 Sq. mm
ESTIMATE FORMET Page 3 of
Qty. Unit Item Per Amount
In Figure In Words
50 Mtr. 15 Making trench in soft soil of suitable width of 55.55 Rupees Fifty Five Mtr.
90 cm deep for laying cable or locating the fault Paise Fifty Five
all over the run and back filling the same and Only
making the surface as normal ground.
6 Nos 16a Replacing old & us Exhaust Fan by Supplying 1703.87 Rupees One Ea
& erecting approved make low noise Thousand Seven
decorative exhaust fan having square frame hundred Three
ABS body with inbuilt lowers & square Paise Eighty
frame.200mm with 1350RPM Cat.II Seven Only
1 Nos 16b 250mm with 1350 RPM Cat.II 1366.53 Rupees One Ea
hundred Sixty Six
Paise Fifty Three
4 Nos 17 Replacing Old & Bend Bracket by Supplying 343.40 Rupees Three Ea
and erecting B class galvanised iron pipe 32 hundred Forty
mm outside dia 45 cm long duly welded on 20 Three Paise Forty
cm x 20 cm x 3 mm thick M.S. base plate, Only
erected on wall or corner for mounting street
light luminaire with necessary hardware
materials duly painted.
29 Nos 18 Replacing old & u/s. SMC Box by Supplying & 476.72 Rupees Four Ea
erecting approved make SMC press moulded hundred Seventy
composite FRP. loop-in, loop-out approx. 2mm Six Paise Seventy
thick box complete with Bakelite connector Two Only
strip 5way(3P+N+E),DIN rail for mounting mob
& hinged doors as per requirement having
locking arrangements with mounting clamp
with nuts, bolts & washers suitable for erection
on pole with cable clamps& earth bolt of
following size of box. (c)150mm x 125mm x
I am / We are willing to carried out the work at ____% Above/below _____________________
______________________________________% (Should be written in figure and words) of the estimate rates
mentioned above. Amount of my/our tender work out as under.:
Estimated Amount Estimated Amount
Put to Tender Rs.________________ Put to Tender Rs.________________
(a) I/We hereby declare that I/We have visited the site and fully exquisite myself/ourselves with
the local situation regarding materials, labour and other factors pertaining to work before
submitting tender.
(b) I/We hereby declare that I/We have carefully studied the conditions of contracts, Detailed
specification and other tender document of this work and agree to execute the same
Note : 1) The Rates are inclusive all taxes, transport charges and storage charges except GST and applicable GST
will be added seperately in the bill and will be paid to the agency
2) The materials covered under contractor should be got approved from the Dy. Executive Engineer, in
charge of the work.
3) The materials and work shall have to be used and carried out as specification in technical note.
4) All works shall be carried out as per public works Department hand book and Other specifications of the
Dn. Or as directed.
5) Rates are inclusve of 1% Labour cess in tender amount so 1% of total amount of bill will be deducted from
5) Rates are inclusve of 1% Labour cess in tender amount so 1% of total amount of bill will be deducted from
6) The material to be used in this work should be approved strictly from Engineer-in-charge / Deputy
Ex. Engineer as applicable.
7) The agency will have to agree to carried out the work as per brand demand of concern deptt.
ESTIMATE FORMET Page 4 of
Qty. Unit Item Per Amount
In Figure In Words
8) Credit of Dismentalled Material to be retained by Agency & cost of Dismentalled Material
Rs.5558/-will be recoverd from the bill.
(Signature of Contractor)
Deputy Executive Engineer
Vadodara Electrical Sub Division,
R&B Deptt. Vadodara
ESTIMATE FORMET Page 5 of
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
01.Notice Inviting Online ten 1008.pdf
02.SBD 1008.pdf
03.SCHEDULE B.pdf
04.Contractor Registration Paripatra.pdf
05.Online notice..pdf
06SPECIAL CONDITION.pdf
07.ELECTRICAL G.R.PDF
08.General Terms and Conditions for Tender.pdf
09.Liability period G.R.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .