Drinking Water Supply Scheme Electrical Work

Amount

electrical

OD463699/2024-2025:Supply of 3 phase 3HP/ 2.2KW. monoblock centrifugal motor pump set capable to discharge 4.5 LPS of clear water to a head of 21 meters, suitable to work with 315V,50HZ A.C.supply including of all taxes. Makes prefered Kirloskar - KDS-335 + + , or equ. Texmo/ .Deccan brands )

OD463704/2024-2025: Supply of three phase MK1 - DOL starter suitable for 3 H.P motor

90.14.24.1:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.1 KVAr, 3 phase, 440 V, delta connected Metalised Poly Propylene Capacitor, Cylinderical Type, suitable for direct connection to motors.

OD463761/2024-2025:Supply & providing 50/40 mm reducer fitting

OD463762/2024-2025:supply & providing 38/40 mm outer dia CPVC pipe for delivery line

OD463763/2024-2025: Supply & providing 50 mm outer dia CPVC pipe for delivery line

OD463689/2024-2025:Supply and providing 50 mm size medium class G.I. bend in position with accessories as required

OD463685/2024-2025:Supply and providing 50 mm size screwed type Gunmetal full way wheel valve in position with CI wheel etc as required.

OD463690/2024-2025: Charges for installation of above 3 H.P, 3 phase ,mono block pumpset over a cocreate block of size 0.4x0.3x0.25 mm made with cc 1:1.5:2 concreate mix , connecting the pipe lines ,and lead cables to motor and tighting the foundation bolts to required alignment for trouble free operation and conducting trail run satis factorly .

OD463684/2024-2025:Supply and providing 4 pole enclosure for independent mounting of MCB/RCCB/Isolator etc. as required.

2.15.2:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

1.17.13:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 2.5 sq. mm

90.6.10.1:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required20 mm

90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

OD463680/2024-2025:Supply and providing Test joint for earthing made up of 2 nos, 25x5 mm GI strip, 25 cm long placed on either sides of earth leads and watering pipe, bending, drilling and tightening with 4 sets of brass/SS nut, bolt, washer etc as required.

5.9:Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG)

90.16.5.2:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG)

90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

OD463678/2024-2025:Supply and providing 25X6 mm brass bolt and nut with washers on the existing MS box/earth bus etc as required including drilling necessary holes as required.

OD463691/2024-2025:Supply and providing the following size of bolt & nut with washers on the existing MS boxes/ earth bus etc as required including drilling necessary holes as required. 12x3mm brass nut & bolt.

OD463734/2024-2025:Fabrication, supply & installation of dust and vermin proof, wall mounting, Hot press moulded SMC Meter Boxbox of following sizes suitable for fixing KSEB meter, fuse units, CT etc, hinged door construction for the front side with compartments if necessary, providing vision panel for the meter compartment, knock out for cable entry and exit. GS-MB- 3750 (inside 350x481x210mm)

OD463674/2024-2025:Supply and fixing 32A, 415 V, 2 way neutral link mounted on DMC/ SMC base in the existing meter board and giving connections as required.

OD463677/2024-2025:Supply and fixing 32A backelite HRC Fuse unit with HRC fuse link in the existing meter board and giving connections as required.

OD463675/2024-2025:Supply and installation of switch gear units in sheet steel enclosure complete with handle assembly, door interlock and pad locking arrangement of the following ratings on existing angle iron frame work or directly to wall using necessary bolts & nuts, fixing the unit to wall, making good the damages, colour washing etc. including giving necessary connections as required. (including cost of HRC fuse links in case of SDF/ SDFCO),32 A, 415 V, 50 Hz, AC 23 A duty, TPN switch disconnector unit with fuses

90.6.10.3:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required32 mm

OD463687/2024-2025:Charges for preparation of application and test report for KSEB connection

Sanju Rajan (BID ID -2166969)

Bidder Name

Sanju Rajan

JASHI P