New Construction Of 30 Bedded Ayush Hospital at.-Atkot, Ta.-Jasdan, Dist.-Rajkot

Name of Work :- New Construction Of 30 Bedded Ayush Hospital at Atkot, Ta. Jasdan, Dist.-Rajkot.

Memorandum showing items of works to be carried out

Quantities Total Amount

Quantities Total Amount

Estimated But According

No. Item Description Unit

may Be More Or In Figures Rs.Ps. In Words to Estimated

Less Quantites Rs.Ps.

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated Rupees Two Hundred Seventy Nine and

1 1142.86 stuff upto any lift & lead.(C) Hard Murrum 279.81 CMT ₹

Eighty One Paisas Only

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated

Rupees Two Hundred Ninety One and

2 1305.24 stuff upto any lift & lead.(D) Soft rock not requiring Blasting 291.30 CMT ₹

Thirty Paisas Only

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials and disposing off

Rupees Three Hundred Sixteen and

3 1673.00 the excavated stuff upto any lift & lead. (D) Soft rock not requiring Blasting 316.22 CMT ₹

Twenty Two Paisas Only

Filling available excavated earth (excluding rock)in trenches, plinth,sides of foundations etc. in layers not exceeding 20 cm. in

Rupees One Hundred Thirty Seven and

4 2268.00 depth consolidation each deposited layer by ramming and watering. 137.47 CMT ₹

Forty Seven Paisas Only

Filling in plinth with sand under floors including watering ramming, consolidating and dressing complete Rupees Four Hundred Seventy Seven

and Thirty One Only

Filling in foundation and plinth with brick Bats Chhara in layers of 20cm. thickness including watering, remming and consolidating Rupees Six Hundred Twenty Nine and

6 228.55 etc.complete. 629.48 CMT ₹

Forty Eight Paisas Only

Filling in foundation and plinth with murrum or selected soil in layers of 20cm thickness including watering ramming and Rupees Two Hundred Ninety Nine and

consolidating etc. complete Sixty Seven Paisas Only

Carring out plinth treatment to post construction / existing structure by spraying chemical solution for termite control treatment

including labour and material consistment with I.S.I specification. Using Chlordene and Chiorpurfiles 20 EC. As Per 6131_paret-II

Consentration Weight one percent is recommended i.e one litre 20 EC chemical emulsion with 19 liter give 1 % concrentration Rupees One Hundred Twenty Four and

inclusive of one litre chemical emulsion appication at the rate of 5 Litre chemical / Sqm of surface is recommended as per I.S Thirty Five Paisas Only

Provdg. & laying cement concrete 1:2:4 (1cement:2 corse sand :4 hand broken stone aggregate 20 mm nominal size) and curing

Rupees Three Thousand Seven Hundred

9 312.31 complete including cost of form work in (A) Foundation and plinth 3772.13 CMT ₹

Seventy Two and Thirteen Paisas Only

Providing and laying controlled cement concrete M-30 and curing complete including the cost of form work but excluding

reinforcement for reinforced concrete work in (A) Foundations, footings, Base of columns and Mass concrete. (more than 10 Rupees Five Thousand Nine Hundred

ton) (A) Footing Ninety Seven and Thirty Eight Paisas Only

Providing and laying controlled cement concrete M-25 and curing complete including the cost of form work but excluding

reinforcement for reinforced concrete work in: ALL FLOORS BEAMS Rupees Six Thousand Three Hundred

Eighty Five and Sixty Five Paisas Only

Providing and laying controlled cement concrete M-25 and curing complete including the cost of form work but excluding

reinforcement for reinforced concrete work in:.(C) Column All Floor Rupees Seven Thousand Eight Hundred

Fifty Six and Eighteen Paisas Only

Providing and laying controlled cement concrete M-25 and curing complete including the cost of form work but excluding

Rupees Six Thousand Ninety Eight and

13 18.00 reinforcement for reinforced concrete work in: (C) RCC Coping 6098.81 CMT ₹

Eighty One Paisas Only

Providing and laying controlled cement concrete M-25 and curing complete including the cost of form work but excluding

reinforcement for reinforced concrete work in: (B) LINTEL Rupees Six Thousand Ninety Eight and

Eighty One Paisas Only

Providing and laying controlled cement concrete M-25 and curing complete including the cost of form work but excluding

reinforcement for reinforced concrete work in: (C) RCC Weathershed All Floor Rupees Six Thousand One Hundred

Seventy and Fifty Two Paisas Only

Providing and laying controlled cement concrete M-25 and curing complete including the cost of form work but excluding

reinforcement for reinforced concrete work in: (C) All Floor Slab Rupees Seven Thousand Six Hundred

Thirteen and Eighty One Paisas Only

Quantities Total Amount

Quantities Total Amount

Estimated But According

No. Item Description Unit

may Be More Or In Figures Rs.Ps. In Words to Estimated

Less Quantites Rs.Ps.

Providing and laying controlled cement concrete M-25 and curing complete including the cost of form work but excluding

Rupees Five Thousand Six Hundred

17 32.50 reinforcement for reinforced concrete work in: (E) Stair case (i) All Floor. 5604.92 CMT ₹

Four and Ninety Two Paisas Only

Providing, laying controlled cement concrete M-25 and curing complete including the cost of form work but excluding

reinforcement for reinforced concrete work in (D) RCC Wall up to Terrace floor Rupees Six Thousand Nine Hundred

Forty Three and Seventeen Paisas Only

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in position complete upto any Rupees Seventy Nine and Forty nine

floor any height Paisas Only

230mm thick Masonary work using Aerated light weight concrete block having crushing strength not less than 35 kg/sqcm for

super structure above plinth level upto floor two level in cement mortar 1:5 ( 1 cement : 5 fine sand ) complete as per Technical Rupees Four Thousand Five Hundred

Specification Ninety Eight and Twenty Eight Paisas Only

Half brick masonry in common burnt clay building bricks having crushing strength note less than 35 Kg/Sq. Cm. in cement mortar

Rupees Four Thousand Five Hundred

1:4 (1 cement : 4 coarse sand) in super structure above plinth level

21 1655.00 4598.28 Ninety Eight and Twenty Eight Paisas CMT ₹

(B) Conventional

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering upto

floor two level and finished even and smooth in (ii) Cement mortar 1:4 (1- cement :4-sand) All floors Rupees Two Hundred Eighteen and

Ninety Three Paisas Only

Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto floor two level and finished

Rupees One Hundred Ninety Six and

23 1737.00 even and smooth in (i)Cement mortar 1:3 (1- cement:3-sand) All Floors 196.52 SMT ₹

Fifty Two Paisas Only

20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting of 12mm thick backing coat

Rupees Three Hundred Forty and Eighty

24 3594.13 of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete. (i) All Floor 340.86 SMT ₹

Six Paisas Only

Providing throating or plaster drip and moulding to R.C.C. chhajja

25 206.00 45.10 Rupees Forty Five and Ten Paisas Only RMT ₹

Providing cement vata (10cm. x 10 cm. size) quarter round in cement mortar 1:1 including neat cement finishing, watering etc. Rupees Twenty Four and Twenty Eight

complete. Paisas Only

Providing & Fixing the Chikenmesh - 20 guage(Crimp Jali) of approved size applying between the RCC and masonry junction in

proper line, level and plumb with all material, labour, tools, tackles and equipment. Including providing and fixing the jali with Rupees Two Hundred Ninety Four and

nails, etc complete as directed by the site-in-charge. Forty Five Paisas Only

Applying two coats of Birla or Asian acrylic lapy ( putty) & two coats of primer of approved brand and manufacture on new wall

28 4700.00 surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and 40.59 Rupees Forty and Fifty Nine Paisas Only SMT ₹

sand papered smooth.

Providing and applying Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on under coated

wall surface to give and even shade including throughly brushing the surface free from mortor droppings and other foreign matter Rupees Eighty Eight and Thirty Nine

and sand paperd smooth on new work to give an even shade.for all height Paisas Only

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after

Rupees One Hundred Twenty Two and

30 1876.00 thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete 122.14 SMT ₹

Fourteen Paisas Only

Providing 20 mm thick water proof cement plaster using water proofing powder 1Kg/1bag of cement for all floors on brick /

concrete wall work using water proofing materials in C M 1: 4 ( 1 cement 4 coasrse sand) including finishing with a flooting coat of

neat cement slurry etc complete for all floor. and shall be guaranteed for minimum period of 10 years after handing over the Rupees Two Hundred Seventy Eight and

completed building by the main contractor to be finished as directed. Stamp paper guarantee 10 years to be furnished before Seventy Six Paisas Only

receiving any payment from the client.

Providing and laying 18 to 20 mm thick polished granite stone machine cut in single piece (Max. available) in sill and jambs of

Door, window, Ventilation frame laid over 10 mm thick cement mortar 1 : 3 (1 cement : 3 coarse sand) and jointed with grey

cement slurry with matching pigment incl. rubbing and polishing half rounding edge etc. complete colour and shed as approved by Rupees Three Thousand Two Hundred

architect engineer in charge. Eighty Two and Fifty Paisas Only

Quantities Total Amount

Quantities Total Amount

Estimated But According

No. Item Description Unit

may Be More Or In Figures Rs.Ps. In Words to Estimated

Less Quantites Rs.Ps.

Providing and laying 24" x 24" vitrified glossy/ satin/ matte finish 8 mm thick tile flooring over 20 mm (average) base of cement

mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of

Rupees One Thousand Five Hundred

33 1326.00 existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for 1546.85 SMT ₹

Forty Six and Eighty Five Paisas Only

Providing and laying 24" x 24" vitrified glossy/ satin/ matte finish 8 mm thick tile flooring over 20 mm (average) base of cement

mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of

Rupees One Thousand Four Hundred

34 67.00 existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for 1472.91 SMT ₹

Seventy Two and Ninety One Paisas Only

Providing and laying Ceramic tiles 6mm thick in flooring treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3

Rupees One Thousand Seventeen and

35 179.00 (1- cement : 3-coarse sand ) finishing with flush pointing in white cement. 1017.30 SMT ₹

Thirty Paisas Only

Providing and laying coloured glazed tiles of the size 300 mm x 450 mm x 8 mm in skirting, risers of steps and dedo on 10 mm.

Rupees One Thousand Five Hundred

36 2720.38 thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with white cement slurry. 1559.10 SMT ₹

Fifty Nine and Ten Paisas Only

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm thick with grade of concrete M300

pnumatic compressed / vibrated mechanically and as per approved design Confirming to IS 15658 : 2006 including 35 mm Sand

layer for levelling and filling the joint with sand in proper line and level as per guidlines of IRC : SP 63-2018 etc. Complete. Rupees Seven Hundred Five and Twelve

Providing and laying Tactile flooring tiles 300mm x 300mm in flooring 12 mm. Thick cement mortar 1:3 (1 cement : 3 coarse sand)

pointing in white ceand jointed with white cement slurry. Rupees One Thousand One Hundred

Thirteen and Two Paisas Only

Providing and fixing 18mm thick gang saw cut mirror polished Granite Slab premoulded and polished machine cut, 20mm thick

base cement mortar 1:6 (1 cement : 6 coarse sand) with joints treated with white cement etc. completed. Rupees Two Thousand One Hundred

Sixty Three and Two Paisas Only

Providing and fixing Three Track Domal window having extruded aluminum Colour anodized 60 micron Sliding section outer frame

size 80 mm x 45 mm weight 1.555 kg/m (Jindal Section code: 21376) and shutter frame 27 mm x 65 mm weight 0.851 kg/m (Jindal

Section code: 21490) and Section inner patti size 38.70 mm x 28.50 mm weight 0.303 kg/m (Jindal Section code 19453), mosquito

jali channel - 9 mm x 15 mm x1.20 mmx1.20 mm weight.118 kg/m (jindal section code 15784) with 5 mm clear Frosted Glass Rupees Seven Thousand Six Hundred

(Modi or Saint Gobain) and including all accesible accesories complete etc. or as directed Engineer in charge. Thirty Five and Sixty Paisas Only

Providing and fixing standared extruded of alluminium section of size 63.50 x 38.10 x 1.95 mm(of Jindal Section no:4605, @ Wt

1.094Kg / RMT with colour anodized alluminium frame with 5 mm thick transparent bronze colour tinted float glass with colour Rupees One Thousand Three Hundred

41 10.00 anodized alluminium frame for ventilation with 5 mm thick frosted glass as details etc complete for.window 1301.82 SMT ₹

One and Eighty One Paisas Only

Providing and fixing M.S. grill of required pattern of windows etc. with M.S.. flats at required spacing and frame alround square or

round headed bolts and nuts or by screws.including applying a priming coat of red lead paint and two coats of oil painting etc Rupees One Hundred Fourteen and

42 2835.00 complete (A)Plain grill 114.44 Kg. ₹

Forty Four Paisas Only

Providing & fixing in position Colour anodize alluminium pivoted Double Shutter door & partition with alluminium anodized

hollow section frame heavy duty extruded built up standard tubular sections/appropriate Z sections and other sections of

approved make conforming to IS: 733 and IS : 1285, of approved shade fabricated from alluminium standard section for outer

frame size 101 mm x 44.5 mm (of app. wt. 1.30 kg/RMT) and door styles and top rial of alluminium section size 47.5mm x

mm (of app. wt. 1.14 kg/RMT) bottom rail & lock rail for door size 114mm x 44.5mm (of app. wt. 1.7kg/RMT) and providing rubber

Rupees Three Thousand Three Hundred

43 33.60 gasket all over including providing 4 Nos. heavy handle(200mm Long), 1 No. heavy lock (Single Lever Godarej Type), bracket, 3398.65 SMT ₹

Ninety Eight and Sixty Five Paisas Only

stoppers (150mm), 12 mm thick particle board fixed with clits including all required materials labours and equipments as per

detailed drawing as directed by Engineer-In-Charge.

Quantities Total Amount

Quantities Total Amount

Estimated But According

No. Item Description Unit

may Be More Or In Figures Rs.Ps. In Words to Estimated

Less Quantites Rs.Ps.

Providing and fixing flush door both sides laminated and I.T.W. beading all around by using I.T.W. frame 120 m.m. x 80m.m..

shutter fabricated from 35 mm thick solid core malemine faced three layered pre laminated flat pressed wood based exterior

grade bonded BWP/BWR synthetic resin having stamped IS 12823 grade I type II including three coats of lacquer polishing to

exposed wooden surfaces and Stainless steel decorative type designs fixtures / fastening etc.including I.T.W. triangular batten Rupees Three Thousand Nine Hundred

patti of size 30m.m.x30m.m.etc. as per architectural detailed drawing and as directed by engineer in charge. Items for all floors, Fifty One and Sixty Eight Paisas Only

lead, lift and any height.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size

comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice

husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and

screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 Rupees Three Thousand Nine Hundred

45 53.00 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof 3958.59 SMT ₹

Fifty Eight and Fifty Nine Paisas Only

and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter

sunk S.S screws, all as per direction of Engineer-In Charge. 35 MM

Providing and fixing 19 mm thick water proof plywood shutters for platform cabinet including using approved formica on shutter

and teakwood decorative batten patti in front portion with necessray fixtures and fastenings including polishing work etc. Rupees Three Thousand Six Hundred

complete and direction of engineer in charge. Five and Seventy Paisas Only

Providing and fixing 3 mm thick PVC sheets as signange and display of health signs/information of required size having retro

reflective letters/design as per requiement, fixing the same through approved adhesive etc. complete work shall e carried out as Rupees Five Hundred Fifty and Fifty Five

47 52.00 per instruction of Engineer-in-charge (Approved make PVC foamed sheet only) (45 x 15 cms.) (any language) 550.55 Each ₹

Providing & Fixing letters made from S. S. 304 grade, 1mm thick. plate in front & top, 35mm thickness of letter will be made

from 16 gauge sheet & it should be shoulders with nickle. Letters will be fix on any surface, wall and at any height. Letters will

Rupees Forty Five and Forty Five Paisas

48 2.00 be fix with Brass Pins and nuts in proper line & level. (stops, comas, hyphens and the like not to be measured and not paid for 45.45 Each ₹

separeately (ii) Indian letters

Providing and laying broken chine mosaic flooring for terrace using 12 mm to 20 mm broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to be tempered to bring mortar creme out upto surface using white cement including

rounding off junctions and extending them upto 15 cm along the wall,clearing with water and oxalic acid etc. as directed. All the

waterproofing activities shall be carried out by in-house application company of the principal material manufacturer and provide a

written corporate Supply Apply Corporate Warranty from the principal manufacturer that all work executed will be free from

defects in materials, workmanship and free of leaks for a period of 10 years from the date of Work Completion, unless resulting

from structural defects or causes other than the work of this section. Said defects shall be remedied by the principal manufacturer

for the period of the warranty without additional cost to the owner for waterproofing material only. •Acrylic Polymer modified

cementations water proofing, System to horizontal rocf and part of parapet (300 mm hight) . Providinhg and laying china mosaic

flooring of broken china moasiaca tile over 75mm to 125mm thick required slope in CC 1:2:4 flooring and mortar 1:3 grouthing

with white cement slurry. Providing & laying china mosaic flooring of approvd make for plain and curved surfaces at floor, dado,

otta etc. comprising of 20 to 25 mm size broken pieces of glazed tiles (only white colour) laid over 1:6 cement mortar bedding

including applying cement slurry at the rate of 2.75 kg per Sq.m. on plain or sloped surfaces and filling joints with white cement. Rupees Seven Hundred Seventy Nine

49 1,357.00 The flooring/ dado shall be tampered with wooden hammer not exceeding 2 Kg in weight to bring the mortar up to the surface 779.70 SMT ₹

and Sixty Nine Paisas Only

including rounding of the junctions and extending them upto 15 cm along the parapet wall. The rate shall include any type of

bands, vata, any colour, any pattern or design as per drawing, curing, cleaning with water and oxalic acid etc. complete as sample

approved by Architect/ EIC. (Only plan area shall be measured including vata upto 150mm height). Rates should be inclusive of

watering and curing acid washing and vata. Work for all lead, lift and height. China Mosaic work should be done in panels and

joints should be fileed with epoxy material. Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone

aggrt. 20 mm. nominal size) and curing etc complete.

Quantities Total Amount

Quantities Total Amount

Estimated But According

No. Item Description Unit

may Be More Or In Figures Rs.Ps. In Words to Estimated

Less Quantites Rs.Ps.

Fabricating, supplying and fixing in position SS railing for staircase and balcony with brush finish and 304 grade as per Indian

Standrd and detailed drawing including grinding, cleaning and filling the welded spots with SS finish (Only Length will be paid for Rupees Three Thousand Two Hundred

50 18.00 payment heigth max.1.0 mt.). The Work to be executed as per consultant drawing . 3286.29 RMT ₹

Eighty Six and Twenty Eight Paisas Only

Providing and fixing sand which type platform including supplying and fixing granite stone 18 mm thick mirror polisdhd 1st quality

Granite stones in top and side posiition and vertical strip at front over 25 mm thick polished kotah stone platform fixing in top and

sides and itermediates supports fixing with cement mortar and adhesivee and finishing including providing cutting for fixing Rupees Five Thousand Two Hundred

51 15.00 kitchen/Laoratory sink (as directed) 610 mm x 460 mm x 200 mm size stainless steel sink / viterious china sink(as directed by 5205.54 SMT ₹

Five and Fifty Four Paisas Only

engineer incharge) at required position etc complete

Providing and fixing in position collapsible steel shutters with vertical channels 20 x 10 x 2 mm braced with flat iron diagonals 20 x

5 mm size with top & bottom rails of T iron 40 x 40 x 6 mm with 38 mm dia steel pulleys complete with bolts, nuts, locking Rupees Six Thousand Three Hundred

52 8.00 arrangements, stoppers handles including applying a priming coat with red lead paint & Two Coat of oil paint etc. complete 6367.62 SMT ₹

Sixty Seven and Sixty One Paisas Only

Providing and fixing Flexible Homogeneous Vinyl Flooring of With treatment of Plyurethane Reinforced Surface, Densely

Compacted, Anti-Bactaril and fungicidal and Antistatic havng thickness of 2.00mm With weight of 3150 g/m2 with levelling, Rupees One Thousand Eight Hundred

53 16.00 chemical adhasive for fixing, corner junction. 1893.75 Ninety Three and Seventy Five Paisas SMT. ₹

Wall Painting (two coats) with antibacterial polyrethane epoxy paint approved brand and manufacture on internal walls to give an

even and smooth surface. Thoroughly brushing the surface free from mortar dropings and other forein matter and sand prepared Rupees Four Hundred Fifty Four and

smooth. Fifty Paisas Only

Providing & applying two Componant ,non slumping ,non-sagging, thixotropic epoxy bedding compond & adhesive compatible

with for tiles for coving at radius of 25 mm or as directed by the architect's / Engineer-in-charge make it fit for tiles inclusive of

Labour, material and Equipment etc. for all heights, location, shape & size as directed by the architect/Bank engineer incharge. Rupees Five Hundred Seventy Five and

(Actual Length shall be measured for payment.) Seventy Paisas Only

Corner Guard Protection System in entire hospital : Supply and Installation of Corner Guard protection system fixed to brick

wall/or tile/dado at the corner from finished floor level. It should be adjustable end cap. Providing and fixing brush/mirror finish Rupees Six Hundred Forty Six and Forty

Providing and applying 2mm thick Texture Plaster Terre Palette (Earthen Textures, Spectrum, Coral or equivalent) incorporating

fine filaments made of polymer and aggregating natural stone powder with making grooves on existing base coat of 18 mm thick Rupees Three Hundred Fifty One and

57 716.09 smooth mala plaster etc. Complete Colour and shade as approved by Architect/ Engineer in charge for all floor all height. 351.48 SMT ₹

Forty Eight Paisas Only

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint, brushing, interior to give an

even shade including cleaning the surface an even shade including cleanicn the surface of all dirt, dust and other foreign matter. Rupees Ninety Six and Fifty Eight Paisas

LOUVERS: Supplying and Installation of GI 84C powder coated louvers etc complete as per drawing& selection as directed by

Architect/Engineer incharge. Rupees Two Thousand Four Hundred

Sixty and Thirty Six Paisas Only

Quantities Total Amount

Quantities Total Amount

Estimated But According

No. Item Description Unit

may Be More Or In Figures Rs.Ps. In Words to Estimated

Less Quantites Rs.Ps.

Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles having Tegular edge & 15 mm Thick Densified edges

on the Tile Periphery for Extra Strength The Light weight calcium silicate ceiling tiles shall have , light reflection 85%

noncombustible as per B.S. 476 part IV, 100% humidity resistanceandalsohaving thermalconductivity0.043° w/m KC.for the best

thermal Insulation . The Light weight calcium Silicate tile shall be of approved texture Fine fissured/ Spintone/Cosmos having NRC

value of 0.5 & Globe having NRC value of 0.75 NRC or equivalent of size 595 X 595 mm to be laid on true horizontal level

suspended inter locking metal gridof hot dipped galvanized steel sections (galvanizing @120 grams per sqm including both side)

consisting of main ‘T’ runner suitably spaced at joints to get required length and size of 24X38mm made from 0.30 mm thick Rupees One Thousand Six Hundred

60 16.00 (minimum) sheet, 1200mm centre to centre, and cross ‘T’ of size 24X28mm made out of 0.33mm (Minimum) sheet spaced 1674.15 SMT ₹

Seventy Four and Fourteen Paisas Only

1200mm along spaced between main ‘T’ at 600mm centre to centre to form agrid of 1200X600mm and secondary cross ’T’ of

length 600mm and size 24x28mm made of 0.30 mm thick (Minimum) sheet to be interlocked at middle of the 1200X600mm panel

to form grid of size

Drilling Of 215mm Dia Bore In Over Burden Strata & Lowering Of Casing & Further Drilling Of 165mm Dia. Bore In Soft & Hard Rock

With Devlopment Of Bore Measuring The Yeild & Fixing Of Bore Cap Etc. Completed (I)0.0Mts To 150.00Mts Rupees Two Hundred Sixty Six and Sixty

Four Paisas Only

Providing and Supplying Of 175mm Normal Dia.UPVC Casing Pipe.

Rupees Five Hundred Thirty One and

Forty Seven Paisas Only

Providing & Fitting Of 200mm Dia. Cap Plug.

Rupees Seven Hundred Seventy One and

Thirty Seven Paisas Only

Providing & Fixing HDPE Pipe For Bore Well.(I) 32MM Dia Rupees Fifty Five and Fifty Five Paisas

FLUSH PARTITION (laminate finish) :

Providing & fixing flush partition up to false ceiling ht (thickness of partition is 75 mm) having 12 mm thick Marin plywood IS

both side on aluminum framing. Aluminum framing size for vertical & horizontal support is 50 mm x 25 mm. All exposed surfaces

finished with 1 mm thick laminate of approved shade without any air gap and grooving as per design. Necessary framing to be

erected above false ceiling. No extra cost to be paid for the same. Before installation, make hole/face plate for conduit pipes of

electrical / networking cables with open able stud from partition Including all materials and labor etc. Make necessary grooves as Rupees Four Thousand Five Hundred

65 65.00 per shown in drawing. All bottom ends are covered with Ghana teak bidding Patti finished with laminate Complete with all 4512.31 SMT ₹

Twelve and Thirty Paisas Only

necessary hardware & adhesives as per details given in drawing and as per instructions of Architect/consultant/Engineer In charge.

Contractor has to provide all necessary cut outs (race ways.) for Electrical works & no extra payment shall be made for it.

LOW HEIGHT PARLY GLAZED PARTITION: Providing & Fixing partly laminated & partly glazed partition up to 1.35 m ht (thickness

of partition is 70mm) having 9 mm thick Marin plywood IS 710 grade both side of aluminum framing of gauge 16 . Aluminum

framing size for each support is 50 mm x 25 mm. having grid of 600 mm x 600 mm. Finished with 1 mm thick laminate at all

exposed surfaces of approved shade. Make necessary grooves as per shown in drawing. Using of 12 mm thick frosted glass with

proper crystal edges. Using of 12 mm thick toughen clear glass with proper crystal edges & with suggested frosted films on glass.

Frosted film material rate is provided extra as per given cost in tender item. All joints are covered with Burma teak bidding Patti Rupees Four Thousand Four Hundred

finished with Laminate. Complete with all necessary hardware & adhesives as per details given in drawing and as per instructions Eighty One and Sixty Seven Paisas Only

of Architect/consultant/Engineer In charge. Contractor has to provide all necessary cut outs for Electrical works & no extra

payment shall be made for it.

Quantities Total Amount

Quantities Total Amount

Estimated But According

No. Item Description Unit

may Be More Or In Figures Rs.Ps. In Words to Estimated

Less Quantites Rs.Ps.

Providing & fixing low ht storage having size of 2400 mm x 1500 mm having depth of 600 mm, having skirting of 75 mm, with

proper locks. 5 nos of vertical supports & 3 no of horizontal shelves made by 19 mm thick Marin ply, having shutters of 9 mm thick

double sandwich ply with using 12 mm thick Marin ply for framing. All complete with proper Burma teak biding. Back ply is 12 mm

Marin ply. All exposed & internal surfaces are covered with 1 mm thick laminate. External & internal joints covered with bidding

Rupees Fifteen Thousand Five Hundred

67 3.00 Patti complete with laminate finish. All complete with proper hardware like locks, S.S. Screws, MS Nails, Magnets, table chains, 15519.16 SMT ₹

Nineteen and Fifteen Paisas Only

cable manager SS 304 Handles of 250 mm and 100 mm dia etc. All Details as per shown in detail drawings & as per instructions of

architect/consultant / in charge engineer

STORAGE BELOW PANTRY COUNTER :Providing & fixing full ht storage having size as per detail drawing , having depth of 600 mm,

having skirting of 75 mm, with proper locks. 5 nos of vertical supports & 3 no of horizontal shelves made by 19 mm thick Marin

ply, having shutters of 9 mm thick double sandwich ply with using 12 mm thick Marin ply for framing. All complete with proper

Burma teak biding. Back ply is 12 mm Marin ply. All exposed & internal surfaces are covered with 1 mm thick laminate. External &

internal joints covered with bidding Patti complete with laminate finish. All complete with proper hardware like locks, S.S. Screws, Rupees Four Thousand Two Hundred

MS Nails, Magnets, table chains, cable manager SS 304 Handles of 250 mm and 100 mm dia etc. All Details as per shown in detail Ninety Three and Thirty Eight Paisas Only

drawings & as per instructions of architect/consultant / in charge engineer

Full height storage: Providing & fixing full ht storage having size as per detail drawing , having depth of 600 mm, having skirting of

75 mm, with proper locks. 5 nos of vertical supports & 3 no of horizontal shelves made by 19 mm thick Marin ply, having shutters

of 9 mm thick double sandwich ply with using 12 mm thick Marin ply for framing. All complete with proper Burma teak biding.

Back ply is 12 mm Marin ply. All exposed & internal surfaces are covered with 1 mm thick laminate. External & internal joints

covered with bidding Patti complete with laminate finish. All complete with proper hardware like locks, S.S. Screws, MS Nails, Rupees Two Thousand Eight Hundred

Magnets, table chains, cable manager SS 304 Handles of 250 mm and 100 mm dia etc. All Details as per shown in detail drawings Sixty Six and Thirty Nine Paisas Only

& as per instructions of architect/consultant / in charge engineer

Construction of granular sub-base 150 mm thick by providing coarse graded machine crushed B.T. material satisfying MOST

specification of grading I (B.T. stone aggregate 53 mm to 26.5 mm 35 %, 26.5 to 4.75 mm - 45 % and 2.36 mm below - 20 %

)including spreading in uniform layer with motor grader on prepared surface, mixing by mix in place method with rotavator at Rupees Nine Hundred Forty Nine and

OMC and compacting with vibratory roller to achieve the desired density etc. complete. Forty Paisas Only

Providing M-250 controlled cement concrete road using Trimix vaccum dewatering system with mixing Conplast P-211 (water

reduction concrete admixture) @ 100 ML per bag of cement with mixing of Recon 3S fibers (reliance product) at 125 gms per bag

of cement with providing and fixing & removing of "C" channel having 75 x 75 mm as per required level slope and thickness of

concrete and leveling and finishing the concrete using surface vibrator, power floater and trowel light brooming on as directed Rupees Six Thousand One Hundred

71 77.00 including making expansion joint of size 20 x 200 mm & filling the expansion joint using Colpar 200 as per manufactures specitions 6174.13 Cumt. ₹

Seventy Four and Thirteen Paisas Only

by cutting of joint using concrete cutter machine etc. complete.

Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm length,30cm height and 15cm thick of

M250 grade concret as per approved design and including excavation for fixing in proper line and level,filling the joint with C:M 1:3 Rupees Four Hundred Nineteen and

(1cement:3fine sand) etc complete. (upto 10 ton) Ninety Five Paisas Only

Supplying & filling fine sand pana in 150 mm compacted thickness over the base including necessary compaction, watering etc.

complete. Item includes leveling by using vibratory plates compacted machine and as directed by engineer in charge. Rupees Four Hundred Sixty and Fifty Six

Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not less than 35Kg. Rupees Nine Hundred Fifty Eight and

Sixteen Paisas Only

Quantities Total Amount

Quantities Total Amount

Estimated But According

No. Item Description Unit

may Be More Or In Figures Rs.Ps. In Words to Estimated

Less Quantites Rs.Ps.

Applying general insecticide pest control treatment to floors, cupboards etc including labour materials etc. complete. Using

Imidacloprid 30.5 SCas Per IS 6313 part -II( (0.075% concentration by mass) is recommended 10.5ml chemical diluted with 5 liters

of water application 0.5 litre chemical /Sqm of surface is recommended as per I.S.r I.S.22006 Rupees Ninety One and Sixty Two Paisas

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. brick work in sub &

superstructure upto floor 4th level in Cement Mortar 1:5. (1- Cement : 5 -fine sand) Conventional Rupees Four Thousand Six Hundred

Seventy One and Fifty Two Paisas Only

Providing and applying one coat of water based exterior primer of approved brand and make as mentioned below on wall surfaces

after thoroughly brushing the surface free from mortar droppings and other foreign matter. Item includes making the surface even

and smooth by sand papers. Rates are inclusive of all the material and labourers and scaffolding work, cleaning of the floors etc. Rupees One Hundred Seventy Two and

77 1622.00 required for the work with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade 172.64 Sq.mt. ₹

Sixty Three Paisas Only

after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete

Providing and fixing decorative entrance gate made out of cast iron and various mild steel tabular section combination (Given as

per detail drawing), the Ornamental entrance gate should be fixed at compound wall including pattern and die making , cutting

welding , grinding, fabrication , fixing in position at compound wall with necessary pedestal, bearing block and other locking Rupees One Thousand Four Hundred

78 20.00 arrangement. The entrance gate should be painted with two coats of priming coat of paint, and three coat of rubber paint (PU 1402.89 Sq.mt. ₹

Two and Eighty Nine Paisas Only

Modified Alkys based finish) etc complete. As per detail design and instruction of architect.

Providing and fixing high fencing with Y shape long M.S. Angle posts 40mm x 40 mm x6 mm (0.60 H X 0.60 W ) and oil painting

coats fixed at 2.5 Mt,C/c. with 3layer of barbed wire and on Y shape Concertina Coil Diameter 900 mm, Razor Type Single Razor Rupees Six Hundred Sixteen and Ninety

GSM 40 GSM, Length 100 m, Material Iron, Surface Treatment, Galvanized Etc Complete One Paisas Only

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe (SCH- 40) for cold water including fittings as approved

by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including Rupees Seventy Two and Sixty Five Paisas

cost of all materials. Only

Providing laying and jointing in true line and level 20mm dia. U.P.V.C. Pipe (SCH- 40) for cold water including fittings as approved

by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including Rupees One Hundred Ninety Eight and

cost of all materials. Ninety Seven Paisas Only

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved

by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as

Rupees Ninety One and Eighty Three

82 158.00 directed including necessary fittings etc. including testing of pipe and joints and fixing 91.84 Rmt ₹

the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 32mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved

Rupees One Hundred Nineteen and

83 270.00 by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as 119.15 Rmt ₹

Fourteen Paisas Only

directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be Rupees One Hundred Forty Eight and

84 50.00 concealed as directed including necessary 148.12 Rmt ₹

Eleven Paisas Only

fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

Quantities Total Amount

Quantities Total Amount

Estimated But According

No. Item Description Unit

may Be More Or In Figures Rs.Ps. In Words to Estimated

Less Quantites Rs.Ps.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation

(NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and Rupees Two Hundred Eight and Seventy

floor etc. complete. [B] 20 mm. All Conceal Pipe line Cold & Hot Water & RO Water Nine Paisas Only

Providing, fixing, jointing and testing, heavy quality cast bronze / brass BALL VALVE / OR WHEEL valves of approved make,

including flanges / unions, nuts, bolts, washers, etc. complete, as approved by the Architect and Engineer-in-charge for water Rupees One Thousand Eight Hundred

supply lines of the following Nominal bore (NB) size: 25 mm Eighteen Only

Providing, fixing, jointing and testing, heavy quality cast bronze / brass BALL VALVE / OR WHEEL valves of approved make,

including flanges / unions, nuts, bolts, washers, etc. complete, as approved by the Architect and Engineer-in-charge for water Rupees Two Thousand Seven Hundred

supply lines of the following Nominal bore (NB) size: 32mm Seventy Seven and Fifty Paisas Only

Providing, fixing, jointing and testing, heavy quality cast bronze / brass BALL VALVE / OR WHEEL valves of approved make,

including flanges / unions, nuts, bolts, washers, etc. complete, as approved by the Architect and Engineer-in-charge for water Rupees Three Thousand Five Hundred

supply lines of the following Nominal bore (NB) size: 40mm Ninety Five and Fifty Nine Paisas Only

Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain

and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line,

pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 160 mm

diametre x 210 mm length x 196 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including Rupees Eight Hundred Thirty Four and

necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement Thirty Eight Paisas Only

including cost of all materials. (Soil + Waste + Rain Water)

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain

and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line,

pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm

diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including Rupees Nine Hundred Eighteen and Sixty

necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement Six Paisas Only

including cost of all materials. (Soil + Waste + Rain Water)

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of the following outside Dia. Low

densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(E) Rupees One Hundred Ninety Two and

50mm (soil + waste water) Two Paisas Only

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure polythene pipes of the following outside Dia. Low

densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(F) Rupees Two Hundred Eighty and Twenty

75mm (Balcony + Standing Balcony + AC Drain) Three Paisas Only

Providing, fixing, jointing and testing IS 14735 for Drain PVC SWR 'P' - traps of self cleansing design with water seal not less than

50 mm., with or without vent, cutting chases / hole in floors / slabs and bringing the same in proper condition and shape after

placing the trap in right position in case of suspended / open plumbing or setting the trap in 1:2:4 CC in case of concealed

93 50.00 606.00 Rupees Six Hundred Six Only Each ₹

plumbing , etc. complete, as required. The trap shall be 'P' type, of following sizes: 110 x 110 mm OD inlet / outlet

Providing and fixing Heavy class S.S. grating with Mosquito proof S.S. strainer of Chilly or equivalent make, as approved,

Rupees Four Hundred Nineteen and

94 50.00 (cockroach trap) including setting in floor with cement mortor to match with floor finish as per architect requirements. 419.15 Each ₹

Fourteen Paisas Only

Providing and fixing in position cowel went to pipes. Rupees Three Hundred Ninety Three and

Four Paisas Only

Providing and fixing in position cowel went to pipes. Rupees Five Hundred Five and

(C) 100mm dia Seventeen Paisas Only

Providing laying (to level or slopes) and jointing reinforced

concrete Light duty non-pressure pipes I.S. class NP2 of the

Rupees Three Hundred Fifty Nine and

97 101.00 following internal diameter with collars and butt ends 359.84 Rmt ₹

Eighty Four Paisas Only

prepared for collar joints including testing of joints

complete.(C) 250mm

Quantities Total Amount

Quantities Total Amount

Estimated But According

No. Item Description Unit

may Be More Or In Figures Rs.Ps. In Words to Estimated

Less Quantites Rs.Ps.

Constructing Brick masonry road gully chamber 500mm x

Rupees Two Thousand Seventeen and

98 13.00 450mm x 600mm including 500mm x 450mm C.I. horizontal 2017.19 Each ₹

Nineteen Paisas Only

grating wih frame complete.

C.I. Cover with frame 500mm x 700mm

Rupees One Thousand One Hundred

Forty and Ninety Five Paisas Only

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with bricks having crushing strength not

less than 35Kg/ Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of cover with

frame to be not less than 38Kg. (Wt. of

cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm

Rupees Seven Thousand One Hundred

100 9.00 size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat 7180.44 Each ₹

Eighty and Forty Four Paisas Only

cement on walls and bed concrete etc. complete.(iii) Inside dimensions 600mm x 850 mm and 450mm deep for pipe lines with

three or more inlets.

Extra over items 24.44 for every additional depth of 0.1M. of

Rupees Three Hundred Twenty Five and

101 2.00 part thereof beyond 450mm depth for Brick masonry 325.59 Each ₹

Fifty Nine Paisas Only

chamber.(iii) for 600mm x 850mm size.

C.I. Cover without frame 455mm x 610mm

Rupees Nine Hundred Sixty Five and

Forty Eight Paisas Only

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-graded stone aggregate 20mm nominal size)

foundation concrete 1:3:6 mix (1-cement : 3-coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick with Cement

Mortar 1:3 (1-Cement : 3-coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4

mix (1-Cement :2- Coarse sand :4-stone aggregate 20mm nominal size) finished smooth complete including curing and festing (i)

Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover with frame size 560mm diameter total weight of cover and

Rupees Eleven Thousand Forty Two and

103 2.00 frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick msonry using 11042.74 Each ₹

Seventy Four Paisas Only

brick having crushing strength not less than 35Kg. /Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (1) A type depth

Metre for 150mm diameter sewer.

(I) Extra rate for constructing B.B. masonry for every

Rupees Five Hundred Twenty Two and

104 1.00 additional depth of 0.1M. or Part thereof over item No.24.27 522.96 Each ₹

Ninety Five Paisas Only

(I) for depth from 0.9M to 1.5M.

Providing and fixing Two way BIB cock with wall flange of genuine Jaquar ompany brand, in with model no FUS-CHR29041, water

Rupees Three Thousand One Hundred

105 20.00 tap brand or approved ISI brand quality, fixing in pieline and testing the same… etc., complete., as directed by EIC 3131.00 Each ₹

Thirty One Only

Providing and fixing wash down water closet dual flushing system type (European type W C pan) with integral P and S trap

including jointing the trap with soil pipe in cement mortar 1:1 (1 cement five sand) including providing and fixing plastic seat cover

for wash down WC with CP brass hinges and rubber buffers back plastic seat and including fitting such as lead valve siphon 15 mm Rupees Four Thousand Two Hundred

dia brass ball valve with polythene float CP brass handle unions and couplings for connection with inlet out let and over flow pipes Forty Two Only

40 mm dia porcelain enameled flush bend including cutting holes in walls and making good the same connection the flush bend

with cistern and closet vitreous china.

Providing and fixing Wash Basin vitreous china table top wash basin size 560mm x 450 mm in white colour. Like JAQUAR CNS-

WHT-903 SIZZE OF 425x340x175MM with single hole for pillar tape with CP or MS brackets painted white including cutting holes

and making good the same including SS waste coupling of 32 mm dia size half theread with 80mm height for wash basin with Rupees Four Thousand Fifty Eight and

rubber plug, SS bottle trap with internal partition of 32mm size with 250mm &190mm long wall flange connection pipes and wall Eighteen Paisas Only

flange of approved quality with necessary fitting for wash basin, SS Pillar cock with extention body with necessary fittings etc.

Providing and fixing Urinal of approved quality including connection with trap and with integral longitudinal flush pipe.(A) Squating

plate pattern white earthenware 550mm x 300mm. including flush cock, bottle trap with internal partition of 32mm size with Rupees Two Thousand One Hundred

250mm &190mm long wall flange connection pipes and wall flange with necessary fitting for wash basin connection with waste Seventy Eight and Fifty Seven Paisas Only

pipe trap etc. complete

Providing and fixing SS finish Angular Stop cock for wash basin like Jaquar code FUS-29053 Rupees One Thousand Seven Hundred

Forty Two and Twenty Five Paisas Only

Quantities Total Amount

Quantities Total Amount

Estimated But According

No. Item Description Unit

may Be More Or In Figures Rs.Ps. In Words to Estimated

Less Quantites Rs.Ps.

Providing and fixing Handicap wash down water closet European type WC pan (Wall Hung) like JAQUAR CNS-WHT-961SPP- SIZE

365x545x360MM and P trap distance 23.5 cms with integral P trap including jointing the trap with soil pipe in cement mortar 1:1

(1 cement : 1 find sand) including providing and fixing of 1) Health Faucet hand shower heavy duty with SS braided hose 1.2 MT

Rupees Twenty Three Thousand Five

110 4.00 long pipe to water closet - JAQUAR ALD-CHR-573 with Single Piece Slim Concealed Cistern Body with Installations Kit & “S-Type” 23533.00 Each ₹

Hundred Thirty Three Only

drain pipe connection set for Wall Hung WC (without Flush Control Plate) - JCS-WHT-2400S with Control Plate Opal - JCP-CHR-

152415,Toilet roll holder -Jaquar -ACN -1151N, including grab bar etc,complete

Providing and fixing on platform stainless steel Sink glossy ASIS 304 grade x 1mm thick with over all size 610x460mm & bowl size

560x410x200mm & SS Pillar cock with extention body like JAQUAR FUS-CHR-29021N including fixing the sink in platform & Rupees Nine Thousand Five Hundred

making good the same including the cost of PVC waste pipe of 32mm dia. and PVC waste coupline etc complete as directed by EIC. Fifty Five and Eighty Paisas Only

Providing and fixing screw down bib taps of following size.(B) Brass chromium plated screws down Bib Tap. (i) 15mm dia. Rupees One Hundred Eighty Six and

Eighty Two Paisas Only

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali of the following nominal diameter of self

Rupees Six Hundred Fourteen and

113 30.00 cleansing design with C.I scread down or hinged grating including the cost of cutting and making good the walls. 614.19 Each ₹

Nineteen Paisas Only

Providing and fixing pillar tap, capstan head, screw Rupees Three Hundred Eight and

down high pressure with screws, shanks and back nuts.(i) 15mm dia. Seventy Two Paisas Only

Providing and fixing C.P. brass towel rail comlete with

Rupees Six Hundred Sixteen and Forty

115 25.00 C.P. brass brackets fixed to wooden plugs with C.P. 616.42 Each ₹

Two Paisas Only

brass scews.(B) 600mm x 20mm size.

Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet.(A) 100mm dia. Each Rupees Two Hundred Eighty Two and

Sixteen Paisas Only

Installing, testing and commissioing of Pump system comprising of horizontal Submersible Pumps with SS casing, SS impeller, SS

Shaft and driven by 415 V AC, 3 phase, 50HZ., motor running at 2900 rpm speed and shall be supplied with all accessories viz.,

base plate, coupling, motor, VFD based control panel, dry run & overload protection, cabling up to panel, earthing, GI medium Rupees Forty Five Thousand Four

duty suction, delivery & header pipes, pressure gauge, pressure switches, pressure transmitter, suction ball valves & delivery ball Hundred Fifty Only

valves & check valves etc., complete. 100 lpm., 40mtr., (To GROUND FLOOR TO TERRACE

TANK) FOR DOMESTIC WATER

Installing, testing and commissioing of Pump system comprising of horizontal Submersible Pumps with SS casing, SS impeller, SS

Shaft and driven by 415 V AC, 3 phase, 50HZ., motor running at 2900 rpm speed and shall be supplied with all accessories viz.,

base plate, coupling, motor, VFD based control panel, dry run & overload protection, cabling up to panel, earthing, GI medium Rupees Ten Thousand One Hundred

118 1.00 duty suction, delivery & header pipes, pressure gauge, pressure switches, pressure transmitter, suction ball valves & delivery ball 10100.00 set ₹

valves & check valves etc., complete.

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length , in below type of pipe erected with 6A Modular type switch / bell push &

accessories and earth continuity of following type, erected on PVC / Metallic/Wooden box, single mounting base frame covered

with textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp Rupees Four Hundred Eighty Five and

holder/ceiling rose / H.D.Connector as directed. Eighty One Paisas Only

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat-III

Point wiring for secondary light point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires, in below type of pipe to be erected complete with earth continuity and necessary

connection with primary light with accessories erected on Metal / PVC / wooden box covered with 3 mm thick PC(Polycarbonate)

/ Acrylic sheet for open / concealed wiring. with necessary Lamp holder / ceiling rose / H.D.Connector as directed. Rupees One Hundred Sixty Seven and

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat-III Sixty Six Paisas Only

Quantities Total Amount

Quantities Total Amount

Estimated But According

No. Item Description Unit

may Be More Or In Figures Rs.Ps. In Words to Estimated

Less Quantites Rs.Ps.

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe erected with 6A Modular type switch and hum free EME step

type electronic fan regulator mounted and accessories with earth continuity of following type erected on PVC / Metallic/Wooden

box, single mounting base frame covered with textured/metallic/white front plate modules erected on / in wall / ceiling as per

Rupees Six Hundred Seventy Four and

121 96.00 pipe erected. with necessary ceiling rose / H.D.Connector as directed. 674.68 Point ₹

Sixty Eight Paisas Only

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat-III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch & 5 pin Plug

erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe

erected with following type of accessories Rupees Seven Hundred Forty Five and

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board. Thirty Eight Paisas Only

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat-III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch & 5 pin Plug

erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe

erected with following type of accessories Rupees Seven Hundred Forty Five and

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board. (FOR UPS) Thirty Eight Paisas Only

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat-III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch & 5 pin Plug

erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe

erected with following type of accessories

Rupees Eight Hundred Seventy One and

124 2.00 [III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. Wire with 2.5 sq.mm ( green) earthing wire from mcb d b board.. 871.63 Point ₹

Sixty Three Paisas Only

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat-III

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured / metallic/white front plate modules erected on / in wall / ceiling with following type Rupees Two Hundred Fifty Seven and

accessories. Cat-III Fifty Five Paisas Only

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate , modules erected with necessary connections as per site situation directed by Rupees One Hundred Sixty and Fifty

Engineer In charge Nine Paisas Only

(4) TV Co-axial Socket outlet Cat.III

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate , modules erected with necessary connections as per site situation directed by Rupees Twenty Five and Twenty Five

Engineer In charge. Paisas Only

(7) Blank Plate Single Cat.III

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling

erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in Rupees Thirty Three and Thirty Three

approved manner as directed. Paisas Only

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of

pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size Rupees Sixty Two and Sixty Two Paisas

(A) with medium class Rigid PVC pipe and accessories Only

(a) 2 wire 1.5 sq. mm

Quantities Total Amount

Quantities Total Amount

Estimated But According

No. Item Description Unit

may Be More Or In Figures Rs.Ps. In Words to Estimated

Less Quantites Rs.Ps.

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type

of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size Rupees Eighty Two and Eighty Two Paisas

(A) With medium class Rigid PVC pipe and accessories Only

(b) 2 wire 2.5 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of

pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for

Rupees One Hundred Twelve and Eleven

131 324.00 earth continuity of following size (A) with medium class 112.11 Mtr. ₹

Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm

Providing and erecting decorative wall bracket fittings complete with LED lamp and rust free fittings components mounted in

chrome finish housing with holder ,clear/opaque glass diffuser complete erected with lead wires with minimum 15 wattage Rupees One Thousand Seven Hundred

capacity as per instruction engineer incharge/architect/authority .cat-III Twelve and Ninety Six Paisas Only

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and

high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

Rupees Two Hundred Twenty and

133 32.00 ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The 220.18 Each ₹

Eighteen Paisas Only

Engineer incharge may select any wattage capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded mounting clips complete.IP20

(i) 5-9 watts,Surge-2 KV KV KV cat-III

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and

high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

Rupees Four Hundred Twenty Seven and

134 32.00 ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The 427.23 Each ₹

Twenty Three Paisas Only

Engineer incharge may select any wattage capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded mounting clips complete.IP20

(ii) 11-15 watts, Surge-2 KV KV cat-III

Quantities Total Amount

Quantities Total Amount

Estimated But According

No. Item Description Unit

may Be More Or In Figures Rs.Ps. In Words to Estimated

Less Quantites Rs.Ps.

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and

high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

Rupees Five Hundred Eighty Nine and

135 265.00 ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The 589.84 Each ₹

Eighty Four Paisas Only

Engineer incharge may select any wattage capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded mounting clips complete.IP20

(iii) 16-20 watts, Surge-2 KV cat-III

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and

high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

Rupees Seven Hundred Fifty Eight and

136 99.00 ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The 758.51 Each ₹

Fifty One Paisas Only

Engineer incharge may select any wattage capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded mounting clips complete.IP20

(iv) 22-24 watts, Surge-2 KV cat-III

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and

high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 % Rupees One Thousand Seven Hundred

137 11.00 ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The 1794.77 Ninety Four and Seventy Seven Paisas Each ₹

Engineer incharge may select any wattage capacity between the ranges shown.) Only

(B) LED Panel Light with provision for Plane front frame with translucent cover fixed to housing complete.IP20

(vi) 36 watts, 24" x 24", Surge- 2KV cat-III

Supply, Installation, Testing and Commissioning of suitable sweep, BEE 5 Star rated, Ceiling fan with Brush Less Direct Current

(BLDC) permanent ferrite magnet Motor, class of insulation: B, Rust free 3 nos.Aluminium blades, 2 nos. canopies, shackle kit with

earthing provision, copper winding, Power factor not < 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum

CMM, 350 RPM,230v (tolerance as per IS : 374-2019), THD < 10%, with remote unit for Speed Control and all remaining accessories

including safety pin, nut bolts, washers, temperature rise = 75 degree C (Max.), suitable for 140 to 285 Voltage and rectifier circuit Rupees Two Thousand Eight Hundred

with surge, over current and overload protection , 50 Hz, Single phase AC Supply, earthing etc. Complete as required.[ Make shall Eighty Five and Fifty Seven Paisas Only

be approved by Engineer in Charge] (B) 1200 mm Sweep (48")

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC bars up to 50mm length each side and pierced

Rupees One Hundred Eight and Seven

139 96.00 through a 16 Gauge M.S. box / Heavy Duty PVC box complete erected concealed in Ceiling with necessary finishing. 108.07 Each ₹

Quantities Total Amount

Quantities Total Amount

Estimated But According

No. Item Description Unit

may Be More Or In Figures Rs.Ps. In Words to Estimated

Less Quantites Rs.Ps.

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box.

Rupees Eighteen and Eighteen Paisas

Supplying & erecting approved make low noise decorative exhaust fan having square frame ABS body with inbuilt lowers & square

frame.For 200mm with 1350 RPM cat-ii Rupees One Thousand Seven Hundred

Three and Eighty Seven Paisas Only

Panel & Switchgear

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 25 KA. at

V,having normal current rating up to 25 A to 100A. with Fixed thermal & magnetic release suitable to work on A.C. supply 50 c/s. Rupees Six Thousand One Hundred

with all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing. Seventy Three and Twelve Paisas Only

ICS=100% of ICU only Cat III

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 415 V.

having Normal current rating 200A.with variable Thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all

Rupees Sixteen Thousand Two Hundred

143 4.00 internal connections, spreader tinned copper & complete erected in existing 16 G.M.S.housing. ICS=100% of ICU only Cat III 16221.61 Each ₹

Twenty One and Sixty One Paisas Only

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. and above at

415 V . having normal current rating 250A. with variable thermal & magnetic release suitable to work on A.C.supply 50 c/s. with Rupees Twenty Thousand Nine Hundred

all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing. Cat III Forty Six and Thirty Nine Paisas Only

Supply of Approved make Iron Clad or metal clad four pole change over switch 415V. confirming to IS of following capacity Rupees Seventeen Thousand Nine

145 1.00 (A) 200 A / 250 A Cat III 17915.38 Hundred Fifteen and Thirty Eight Paisas Each ₹

Providing and erecting Approved make Earth fault Relay suitable to mount with inter connection suitable to following size of

moulded case circuit breaker having CT ratio & MCCB rating as following along with shunt trip 220V AC. with all internal

Rupees Five Thousand Four Hundred

146 1.00 connections & complete erected in existing M.S.housing. 5415.62 Each ₹

Fifteen and Sixty Two Paisas Only

PANEL MOUNTING BUSBARS

Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with four equal Nos. of bus having

current density not more than 0.8 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for

Rupees One Thousand Four Hundred

147 10.00 phase sequence of following current carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to 1469.55 Rn.Mtr ₹

Sixty Nine and Fifty Five Paisas Only

each busbar,erected in existing cubical panel with necessary connections.

(C) Suitable for 300 Amp. Capacity

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system and having

Rupees One Hundred Twelve and Eleven

148 198.00 breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark Cat.III 112.11 Each ₹

Providing and erecting 415 Volt MCB four pole motor & inductive load(c Curve) having 10 KA Breaking capacity and confirms to IS :

Rupees Six Hundred Sixty Eight and Sixty

149 4.00 8828 in existing metal box having following capacity. 668.62 Ea. ₹

Two Paisas Only

(b)40 Amp. Cat- III

Providing and erecting 415 Volt MCB four pole motor & inductive load(c Curve) having 10 KA Breaking capacity and confirms to IS :

Rupees Seven Hundred Thirty Seven and

150 21.00 8828 in existing metal box having following capacity. 737.30 Each ₹

Thirty Paisas Only

(C) 63 Amp. Cat- III

Providing & erecting 415 V MCB three Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS

Rupees Five Hundred Eighty Seven and

151 2.00 :8828 in existing box having following capacity 587.82 Each ₹

Eighty Two Paisas Only

(a) 6 to 32 Amp. Cat- III

Providing & erecting 415 V MCB three Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS

Rupees Six Hundred Forty Seven and

152 1.00 :8828 in existing box having following capacity 647.41 Each ₹

Forty One Paisas Only

(b)40 Amp. Cat- III

Providing & erecting 415 V MCB three Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS

Rupees Seven Hundred Sixteen and

153 3.00 :8828 in existing box having following capacity 716.09 Each ₹

Nine Paisas Only

(c)63 Amp. Cat- III

Quantities Total Amount

Quantities Total Amount

Estimated But According

No. Item Description Unit

may Be More Or In Figures Rs.Ps. In Words to Estimated

Less Quantites Rs.Ps.

providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand

capacity of 10 KA and suitable for operation on single phase 240 V,50Hz. having characteristic of quick action & tripping with all

Rupees One Thousand Nine Hundred

154 3.00 advance feature & do not incorporate any electronic component. for following Max. rating erected as directed 1969.50 Ea. ₹

Sixty Nine and Fifty Paisas Only

(i) 25 Amps.DP Cat. III

providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand

capacity of 10 KA and suitable for operation on single phase 240 V,50Hz. having characteristic of quick action & tripping with all

Rupees Two Thousand Two Hundred

155 21.00 advance feature & do not incorporate any electronic component. for following Max. rating erected as directed 2235.13 Each ₹

Thirty Five and Thirteen Paisas Only

(ii) 40Amps. DP Cat. III

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral

link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs

should be used of same company of MCB to be used) suitable for

(B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI) Rupees Two Thousand Nine Hundred

(b) sheet steel double door Thirteen and Eighty Five Paisas Only

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral

link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs

should be used of same company of MCB to be used) suitable for

(B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI) Rupees Three Thousand Four Hundred

(b) sheet steel double door Twelve and Seventy Nine Paisas Only

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral

link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs

should be used of same company of MCB to be used) suitable for Rupees Three Thousand Eight Hundred

(B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI) Seventy Four and Thirty Six Paisas Only

(b) sheet steel double door

Supplying & erecting in earthpit of minimum bore dia. 225mm size approved make Safe Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 80 mm having 80-200

Micron galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising, connection terminal dia of 14 mm with constant

ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications

with chamber and heavy duty cover (A)(approved make OEM has to submit test certificate including value of earth resistance of

installation duly stamped and signed by agency and officer Incharge has to ensure the value of earthing resistane mentioned in

Rupees Ten Thousand Five Hundred

159 10.00 test Certificate) & having back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as 10593.89 Nos. ₹

Ninety Three and Eighty Nine Paisas Only

per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for long time Necessary test report must be submitted by Agency.

(c) For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive Computer

System(like Automation, SCADA) i.e independent Earthing in normal soil.

Length of Pipe : 3.00 mtrs

Back filling Compound :2 nos Bags of 25 Kg.

Quantities Total Amount

Quantities Total Amount

Estimated But According

No. Item Description Unit

may Be More Or In Figures Rs.Ps. In Words to Estimated

Less Quantites Rs.Ps.

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type cubical panel board

necessary IP-42 and above protection as per approval from engineer incharge made from 14 SWG thick CRC M.S. sheet for outer

body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with necessary accesories , supporting angles/ flats channel

including cutting, bending, drilling, welding, riveting with internal partitions & cable alley as per requirements & instruction of

engineer-in-charge with erection of supplied switch gears, BUSBARS, suitable size of inter connecting PVC copper wire / copper-

Rupees Fourteen Thousand Nine

160 10.00 aluminium strips, rubber grommets, rib, bakelite control fuses/MCB for measuring instruments, earth bus & earth bolts, 14902.55 Sq.Mtr ₹

Hundred Two and Fifty Five Paisas Only

foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket,heavy

duty end terminal connection,danger notice board,necessary ventilation,earthing strip complete. The Panel shall be painted with

epoxy powder coating.

(B) The standard companies switch gear shall be used and only manufacturers at CPRI approved factory

(i) with 350mm depth

Providing and erecting ,Fabricating the box type items made from M.S. Sheet with A.I. supports, wings, doors, handles other

hardware materials as per requirement design with finishing by three tank powder coating processed inside and outside painted, Rupees One Hundred Eighty and Seventy

erected as directed including minor civil work. Nine Paisas Only

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

Rupees Two Hundred Twenty and

162 100.00 necessary clamps or in existing trench / pipe of following size of cables 220.18 Mtr ₹

Eighteen Paisas Only

(B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of following size of cables Rupees Three Hundred Seventy Eight

(D) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core) and Seventy Five Paisas Only

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of following size of cables Rupees Nine Hundred Four and Ninety

(H) 3 1/2 core 185 Sq. mm ( 95 Sq. mm 1/2 core) Six Paisas Only

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe of following size of cables Rupees One Hundred Fifty Three and

(A) 4 core 16 Sq. mm Fifty Two Paisas Only

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall

Rupees One Hundred Ninety and Eighty

166 140.00 with necessary clamps or in existing trench / pipe of following size of cables (B) 4 core 25 Sq. mm 190.89 Mtr ₹

Nine Paisas Only

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid Copper conductor for 1.1 KV. to be laid on wall

Rupees Three Hundred Sixty Four and

167 70.00 with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables.(B) 4 core 4 Sq. mm 364.61 Mtr ₹

Sixty One Paisas Only

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid Copper conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. Rupees Five Hundred Ten and Five

(C) 4 core 6 Sq. mm Paisas Only

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. Rupees Six Hundred Seventy Six and

(A) 4 core 10 Sq. mm Seventy Paisas Only

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with

out going tails, insulating tape etc for following size of cables. Rupees Thirty Three and Thirty Three

(A) 2 to 4 core 2.5 / 4 Sq. mm Paisas Only

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with

out going tails, insulating tape etc for following size of cables. Rupees Thirty Eight and Thirty Eight

(B) 2 to 4 core 6 Sq. mm Paisas Only

Quantities Total Amount

Quantities Total Amount

Estimated But According

No. Item Description Unit

may Be More Or In Figures Rs.Ps. In Words to Estimated

Less Quantites Rs.Ps.

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with

out going tails, insulating tape etc for following size of cables. Rupees Thirty Eight and Thirty Eight

(C) 2 to 4 core 10 Sq. mm Paisas Only

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with

out going tails, insulating tape etc for following size of cables. Rupees Forty Seven and Forty Seven

(D) 2 to 4 core 16 Sq. mm Paisas Only

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with

out going tails, insulating tape etc for following size of cables. Rupees Fifty One and Fifty One Paisas

(E) 2 to 4 core 25 Sq. mm Only

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated

Rupees Seventy Five and Seventy Five

175 2.00 armoured cable complete with out going tails, insulating tape etc for following size of cables.(B) 3 & 1/2 core 35/50 Sq. mm 75.75 Each ₹

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails, insulating tape etc for following size of cables. Rupees One Hundred Three and Two

(C) 3 & 1/2 core 70 Sq. mm Paisas Only

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails, insulating tape etc for following size of cables. Rupees One Hundred Thirty One and

(D) 3 & 1/2 core 95 Sq. mm Thirty Paisas Only

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated

Rupees Two Hundred Thirty Eight and

178 2.00 armoured cable complete with out going tails, insulating tape etc for following size of cables.(G) 3 & 1/2 core 185 Sq. mm 238.36 Each ₹

Thirty Six Paisas Only

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure

Rupees Thirteen and Thirteen Paisas

179 72.00 tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (B) 10 Sq.mm 13.13 Each ₹

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure

tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.

180 74.00 15.15 Rupees Fifteen and Fifteen Paisas Only Each ₹

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure

181 12.00 tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (D) 35/50 Sq.mm. 20.20 Rupees Twenty and Twenty Paisas Only Each ₹

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure

Rupees Twenty Five and Twenty Five

182 6.00 tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (E) 70 Sq.mm. 25.25 Each ₹

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure

183 14.00 tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.(F) 95 Sq.mm. 40.40 Rupees Forty and Forty Paisas Only Each ₹

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure

184 6.00 tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. ( I ) 185 Sq.mm. 80.80 Rupees Eighty and Eighty Paisas Only Each ₹

Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool &

185 64.00 connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (A) 1.5/ 2.5/4/6 Sq.mm 8.08 Rupees Eight and Eight Paisas Only Each ₹

Danger Sign boards

Rupees Sixty Nine and Sixty Nine Paisas

186 1.00 Providing and erecting metallic vitrified danger notice board as per language suggested by engineer incharge for MEDIUM 69.69 Each ₹

VOLTAGE installation to be erected as per IS-2551.

Providing & erecting Medium Voltage Danger Notice Board sticker as per language suggested by engineer incharge of standard size Rupees Twenty Six and Twenty Six Paisas

as per IS-2551 Only

Pipe & Cable Tray

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with

Rupees One Hundred Thirty Seven and

188 40.00 necessary connecting accessories of same material at required depth in existing trench for laying of cable. below ground / road 137.36 Mtr ₹

Thirty Six Paisas Only

surface for enclosing cable (D)120 mm outer dia.

Quantities Total Amount

Quantities Total Amount

Estimated But According

No. Item Description Unit

may Be More Or In Figures Rs.Ps. In Words to Estimated

Less Quantites Rs.Ps.

Providing and fixing approved make Perforated C type cable tray. Made from sheet steel. The cable tray should be single or

double bended as per required and as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS 2629/4759. with

max 17.5% perforation with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erection with necessary Rupees Six Hundred Twenty Two and

support( included) as per Specification and as per instruction of engineer in charge..(5) 300 X 50 X 2.0 mm Thick Sixteen Paisas Only

Providing and fixing approved make Perforated C type cable tray. Made from sheet steel. The cable tray should be single or

double bended as per required and as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS 2629/4759. with

max 17.5% perforation with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erection with necessary Rupees Eight Hundred One and Ninety

support( included) as per Specification and as per instruction of engineer in charge..(6) 450 X 50 X 2.0 mm Thick Four Paisas Only

multifunctional meter

Providing and erecting multifunctional meter suitable for application of Power monitoring and showing measurement of following

Voltage, Frequency, Apparent energy, Apparent power, Active and reactive energy, Active and reactive power, Average voltage

Vavg, Peak demand power PM, QM, SM, Demand power P, Q, S, Apparent power S, S1, S2, S3, Unbalance current, Power factor

Rupees Fourteen Thousand One

and displacement PF (signed, four quadrant), Calculated neutral current, Active, reactive, apparent energy (signed, four quadrant),

191 3.00 14123.84 Hundred Twenty Three and Eighty Four Each ₹

Active power P, P1, P2, P3, Voltage U21, U32, U13, V1, V2, V3, Phase currents, Average current Iag, Peak demand currents,

Reactive power Q, Q1, Q2, Q3, Demand current I1, I2, I3, [Us] rated supply voltage 40...300 V AC 45...65 Hz, 40...300 V DC,

Network frequency 50 Hz, Type of network 3P, Display type 7 segments LED, Display colour Red, Messages display capacity 3 fields

of 4 characters, Display digits 12 digit(s) - 14.2 mm in height

Providing and fixing printed instruction chart both in English and Gujarati and duly framed with front glasses, for treatment of

Rupees One Hundred Thirty and Twenty

192 1.00 person suffering from Electric shock with minimum 50" diagonally size. 130.29 Each ₹

Nine Paisas Only

Providing pair of rubber hand gloves suitable for working on 11 KV/22 KV supply. Rupees Two Hundred Fourteen and

Twelve Paisas Only

Supplying rubber matting of following thickness as per IS:15652/IEC 61111 Rupees One Thousand Twenty Seven

and Seventeen Paisas Only

Supplying stand first AID box with antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage,

Rupees Two Hundred Ninety Nine and

195 2.00 medicated ready to use bandage (Band-aid) adhesive tape for medicinal user, Scissors, anti-septic solution (Savlon or similar) etc. 299.97 Each ₹

Ninety Seven Paisas Only

(All above contents shall be of standard makes)

Supplying and erecting, commissioning and testing of Diesel Generating set confirming to IS: 4722:1968 & BS:5514 having

continuous rating, 3 phase, 415 volts, 50 cycles A.C. supply comprising of a totally enclosed air/water cooled diesel engine with

multi-cylinders developing suitable BHP not less than following capacity at 1500 RPM with 10% overload for one hour in 24 hours

with standard accessories like fly wheel, lubricating oil cooler, "A" class governor, heavy duty fuel wheel and lubricating oil filter,

oil bath air filler, lubricating oil pressure gauge, end exhaust manifold, standard set of tools with adjustable spanners, screw

drivers, cylinder head to cover, joint cylinder head to exhaust, element lube oil filter, 12 / 24 volts electric starting equipment

complete with standard heavy duty battery, dynamo, cut-outs, ammeter, necessary wiring, pressure gauge, starter etc and heavy

duty Residential type exhaust silencer (With DEF System) and vertical hot air duct both logged with asbestos rope, save oil trays,

exhaust piping of required length, standard wall/floor mounted fuel with level indicator and piping and drip proof alternator, self

excited, self regulated, screen protected, with excitation system, capable of delivering the rated system output at 415 volts,

phase, 0.8 PF, 50 Hz, 4 wire, running at 1500 RPM, conforming to IS-4722- 1968 with voltage regulation +/- 5% of rated voltage

from no load to full load. Both the engine and alternator fitted on a common fabricated steel base plate with antivibration

mounting engine and alternator both connected to each other by flexible flange coupling and with floor/wall mounted control

panel box comprising of voltmeter ammeter, selector switches, ACB / MCCB / MCB of adequate capacity, Rupees Thirteen Lacs Ninety Six

196 1.00 1396603.76 Thousand Six Hundred Three and Each ₹

Seventy Six Paisas Only

Quantities Total Amount

Quantities Total Amount

Estimated But According

No. Item Description Unit

may Be More Or In Figures Rs.Ps. In Words to Estimated

Less Quantites Rs.Ps.

indicator lamps duly wired with HRC fuses. The alternator & control panel shall be connected with provided suitable capacity

armoured cable and complete with Acoustic enclosure (canopy) made out of 16 SWG CRCA Sheet, sound absorbing material

Rockwool of 64 density & 100 mm thick conforming to IS:8183 / PU Foam of 40 Density - at least 40 mm. The resin bonded

rockwool covered from inside the canopy by perforated sheet with 3/4 mm holes, sound level not more than 75 dB at a distance of

1 mtr, as per PVCT norms.DG set should have in built fuel tank capacity of minimum 8 hrs of continous running capacity on full

load . Erection, commissioning and satisfactory testing as per requirement with first filling of fuel (minimum up to the 80% of fuel

tank capacity), oil, etc. with guarantee / Warrantee of complete system for Two years. & with obtaining all necessary certificate

from Electrical Inspector. The Capacity and Ratings of DG sets are as below. (As per new CPCB4+ Emission norms Engine With -

Turbo Charger, EGR (Exhaust Gas Recirculation), CRS (Common Rail Fuel System), DOC (Diesel Oxidation Catalyst), SCR (Selective

Catalytic Reduction), Integrated wiring harness connected to ECU .) (O) Continuous rating of 160 KVA ,BHP not less than 197 BHP

Providing & erecting approved make AMF control panel suitable for following size of 3 phase, 415 V., 50 cycles, A.C. diesel

generating set complete of scope as detailed below:

1) Power module: A pair of electromechanically interlocked contactors (for mains & generator) Overload relay for generator

contactor Neutral contactor for mains and generator Power socket for connections.

2) Control and metering module: Line voltage monitor. Generator voltage monitor Ammeter 3 items attempt start facility. Air

circuit breakers/MCB/MCCB of suitable rating for auto/manual operation. Auto/manual switch. Emergency stop push buttons. Rupees Two Lacs Twenty Two Thousand

197 1.00 Manual start push button. frequency meter. Engine hour meter. Two earthing studs. 222714.09 Seven Hundred Fourteen and Nine Paisas Each ₹

3) Protection module: The engine shutdown in the unlikely event of Low lube oil pressure High cylinder head temperature. V belt Only

4) Indicators with alarm Load on generator.

5) Indicators Load on mains Engine fails to start . Emergency stop battery charger.

The AMF Panel of following capacity

(D) AMF Control Panel for200 KVA/250 KVA3 phase DG Set

Design, Supplying, installing, testing of factory fabricated ready made Three phase APFC Panel Cubical Panel fabrication should be

type tested as per IEC 61921, 61439:1&2 Capacitor Duty Contactor for switching as per following Steps Incomer Switch of MCCB

type Icu=Ics=50KA at 400/440 Volts, with OC, SC, internal earth fault protection Incomer Switch of MCCB type Icu=Ics=50KA at

400/440 Volts, with OC, SC, internal earth fault protection,Copper tinned insulated Busbar,Cubical panel should be indoor type

with IP 43 and IK 10,Metalized polypropylene film tye3-phase 550Volt Capacitor,De tuning Reactor for each capacitor,Panel having Rupees Four Lacs Thirty Three Thousand

198 1.00 Short Circuit and Overload protection,Each step Capacitor having suitable MCB with Sc, OL, internal earth fault relay,Each stage 433103.15 One Hundred Three and Fifteen Paisas Each ₹

having Stage Contactor (Capacitor load rating),PF regulator master controller having suitable steps with LCD display, Rs 485 Only

Communication port, Indication LED Lamps for main incomer and ON-OFF for each capacitor bank,MS Chanel for Floor mounting,

Cable entry as per site situation,Cooling fans for panel

Supplying and erecting approved make online Un-interruptible Power Supply system comprising flat cum-boost charger with IGBT

base rectifier & Inverter & sealed maintenance free SMF batteries. The charger having operating capacity for input 160-270V AC &

inverter having output 230V,50 Hz Ac with 0.8 load power factor with battery, over/under voltage output with over load & short Rupees Three Lacs Ninety Seven

199 1.00 circuit protection equipment. The system housed in CRC sheet duly powder coated paint with following power backup.with MS 397324.91 Thousand Three Hundred Twenty Four Each ₹

painted batteries stand, 10% Overload capacity for momentary load. and Ninety One Paisas Only

(J) 20 KVA 3 - phase with 1Hr Backup

Quantities Total Amount

Quantities Total Amount

Estimated But According

No. Item Description Unit

may Be More Or In Figures Rs.Ps. In Words to Estimated

Less Quantites Rs.Ps.

Supply, installation, testing & commissioning Servo Controlled

Automatic Voltage stabilizer suitable for out put voltage of 415 Volt ±

1%, 3 Phase, 50 Hz, (air/oil cooled) as mentioned below. The stabilizer shall function satisfactorily even if incoming supply is

unbalanced between phases within range of 360-480 VAC.

The stabilizer should be constructed in cubical box, with bidirectional wheels for easy handling, necessary monitors and user's

controls on front panel such as indication, alarm, volt meter and selector switch for measuring input and out put voltage, Auto /

Manual selector switch, Raise/Low push buttons etc. Suitable capacity termination strips and bus bars for incoming and out going Rupees Two Lacs Twenty Seven

cable should be Terminated as per SLD. All three phases shall be independently monitored and corrected. Following protections Thousand Two Hundred Fifty Only

and indications shall be incorporated

Over Voltage / Under Voltage, Single Phasing, shunt trip with

electronic output sensing unit Servo Controlled Automatic Voltage Stabilizer (Out put 415 ± 1%), Included Change over switch for

(A) 150 kVA Oil Cooled, Indoor type

LIGHTNING ARRESTER

SITC of Vertical Air Termination Solid aluminium with Base- 10 mm dia and 1000 mm long. Air Termination Base tested for

Rupees Nine Thousand Four Hundred

201 1.00 conditioning, Ageing Test & Lightning impulse current withstand test: 100 kA of 10/350µs waveform in an accredited Third party 9416.23 Each ₹

Sixteen and Twenty Three Paisas Only

laboratory as per 6.3 & 6.4 of IEC 62561-1 2017 protocol with MAST 34mm dia 3000 mm long- Cold Galvanized

SITC of 8 mm dia solid Aluminium Conductor for roof top mesh grid and tested as per IEC 62561- 2 conducted in the Govt.

accredited thirty party laboratory to meet the requirement of IS/IEC 62305 with Required Accessories - Aluminium Holding clamp

at every 1 mtr distance, Aluminium/SS cross splicer at every crossing of Alu. conductor, Expansion piece with connectors at every

20 mtr distance, Aluminium straight Splicer to connect conductors. All Accessories should be tested as per IEC 62561-1 2018 Cl.

Rupees Two Hundred Ninety Nine and

202 50.00 6.3 for conditioning & Ageing Test & 6.4 for Lightning impulse current withstand test: 100 kA of 10/350µs waveform(Ageing & 299.97 Mtr ₹

Ninety Seven Paisas Only

Electrical test ) conducted in a sequence manner & tested in the Govt. accredited Third party laboratory to meet the requirements

SITC of 14.2 mm dia 3 mtr long Earth electrode of High tensile steel electrode with 250 micron copper bonding & 1 bag of Carbon

fill Based environment friendly backfill tested as per IEC 62561-7 in NABL accredited Laboratory and suitable stainless Steel double Rupees Five Thousand Nine Hundred

sided clamp. Eco Friendly rust proof heavy duty weather proof Polyethylene Earth Pit Chamber with following dimensions :254 Ninety Two and Thirty Three Paisas Only

mm dia (top), 330 mm dia (bottom) & 260 mm (height).

SOLAR PV SYSTEM

Supply, Installation, Testing & Commissioning of following size of Grid Tied Solar Power Plant with

Solar Panels (ALMM approved): Frame Material : Anodized Aluminum alloy Frame With Twin Wall Profile, Front Cover : High

Transmission Low-Iron Tempered Glass (AR Coated), High efficency and positive power tolerance Pmax: 0/+5, Module Efficiency

should be approx. 18%-21%, Normal operating temperature 45'C, Junction Box with Waterproof IP67 & MC4 Compatible and

Enclosed with Bypass diodes, 100% Electroluminescence test to ensure error free Modules, Thep. temp. co-efficient of the PV

module shall equal or better than -0.45%/degree C. Solar PV modules of minimum fill factor 75% to be used. Unit Production:- 4 to

5 Unit /kw /day (Actual)(1Year Avg) With 10 year Product warranty and 25 year Linear Power Warranty.,

Solar Inverter: MPPT Range: 80-1000 V, Max efficiency: 97.5% - 98.9%, O/p Frequency: 50/60Hz, Operating Altitude (m) ≤4000,

O/p Power Factor: ~1, O/P THDi: <3%, Operating Tempreture Range: -25~60°C, Anti-islanding Protection:

Rupees Forty Thousand Six Hundred

Fifty Eight and Fifty Six Paisas Only

Quantities Total Amount

Quantities Total Amount

Estimated But According

No. Item Description Unit

may Be More Or In Figures Rs.Ps. In Words to Estimated

Less Quantites Rs.Ps.

Integrated, Input Reverse Polarity Protection Integrated, Insulation Resistor Detection Integrated, Residual Current Monitoring Fifty Eight and Fifty Six Paisas Only

Unit Integrated, Output Over Current Protection Integrated, Output Short Circuit Protection Integrated, Output Over Voltage

Protection Integrated, Protection Degree: IP65, User Interface LCD & APP,Datalogger & Communication: GPRS / Wi-Fi, Module

Mounting Structure: Seamless Box Pipe / 'C' Channel of suitable size for rooftop solar installations with good stability agaist wind

& weight load., Hot Dipped Galvanized steel coils. suitable arrangement for base plate for foundation , solar panel mounting, the

structure should be suitable for carry the load of solar panel,wiring, sprinkler system etc. with necessary foundation work/wall

mount, j bolt, anchor fastner etc. the nut bolt used for installtion of stucture should be (SS 304) quality. and Balane of System with

necessary Swithgears (Suitabel size and protection of ACDB & DCDB), inter connecting wiring, earthing system, lightining arrester

system, all liasoning work with various gov. dipartment like state nodal agency,DISCOM & CEIG is included in agency scope

(Excluding GEDA Application fees, Solar connectivity Charges, Meter connectivity Charges, Meter testing Charges.) (E) Grid Tied

Solar Power System: 51 - 100 kW (3 - phase)

Supplying and Erecting 'C' Channel of suitable size for rooftop solar installations with good stability agaist wind, Hot Dipped

Galvanized steel coils. It have suitable arrangement for base plate for foundation Screw Arrangement , solar panel mounting, the

Rupees One Hundred Fifty Two and Fifty

205 3600.00 structure should be suitable for carry the load of solar panel,wiring, sprinkler system etc. with necessary foundation work/wall 152.51 PER KG ₹

One Paisas Only

mount, j bolt, anchor fastner etc. the nut bolt used for installtion of stucture should be (SS 304) quality.

Providing and erecting water cooler having storage capacity 80Ltr. & cooling capacity 40 Ltr.per hour @ an ambient temp of 45˚ C.

The outlet temp. of the water should drop by 15˚ C within a hour, The water cooler should be comprising of hermetically sealed Rupees Forty Nine Thousand Five

206 1.00 compressor, fan motor, condensing unit, water tank surrounded by evaporating coil, thermostats, relay etc. complete with 49559.69 Hundred Fifty Nine and Sixty Nine Paisas Ea. ₹

necessary inlet & outlet connection. The body of water cooler will be made from Stainless Steel. Only

Supplying & erecting reverse osmosis (RO) water purification system with M.S. powder coated pedestal frame, prefilter housing

carbon filter suitable buster DC pump, auto low & high pressure switches with following size of LPH capacity & erected as directed

[D] 100 LPH with 1 phase / 3 phase Raw water pump of 500LPH @ 2.5kg/cm2 - (1N0 - Kirloskar /CRI/Lubi), Dual media filter

Rupees Seventy Seven Thousand Eight

10"x54" - (1 No), Micron cartridge filter 20" x 2.5" ( 1No), High pressure pump 500LPH @ 10kg/cm2 - (1No - Shimge /CRI /Lubi),

207 1.00 77891.20 Hundred Ninety One and Twenty Paisas Ea. ₹

RO Membrane housing with RO membrane of 40*40 - (1No), RO pressure tube 4" x 1E - ( 1No), 0 - 1200LPH Rotameter -(2 Nos),

with Recovery Rate 50%.

SPLIT AIR-CONDITIONERS

Providing and erecting Inverter based approved make split air-conditioning unit consisting of condensing unit with variable speed

fan motor, inverter type hermetically sealed rotary compressor with accessories etc. duly connected separately erected

evaporating unit and blower motor with its accessories by means of extra supplied proper insulated copper tubing,drain PVC pipes Rupees One Lacs One Thousand One

208 2.00 suitable for ( cost includes Eco Friendly green gas charging and 15A plug top & Remote Control & MS Stand) with necessary core 101166.65 Hundred Sixty Six and Sixty Five Paisas Ea. ₹

cutting. (1)For ISEER Range (KWH/KWH)(3.1 to 3.99) Only

(D) for 2.2 to 2.5 ton capacity- Premium Cat.

SPLIT AIR-CONDITIONERS

Providing and erecting Inverter based approved make split air-conditioning unit consisting of condensing unit with variable speed

fan motor, inverter type hermetically sealed rotary compressor with accessories etc. duly connected separately erected

evaporating unit and blower motor with its accessories by means of extra supplied proper insulated copper tubing,drain PVC pipes Rupees Seventy Two Thousand Three

209 1.00 suitable for ( cost includes Eco Friendly green gas charging and 15A plug top & Remote Control & MS Stand) with necessary core 72381.65 Hundred Eighty One and Sixty Five Paisas Ea. ₹

cutting. (2)For ISEER Range (KWH/KWH)(4.0 to 4.49) Only

(C) for 1.7 to 2 ton capacity-Premium Cat.

Providing and erecting Inverter based approved make Cassette type split air-conditioning unit consisting of condensing unit with

fan motor, hermetically sealed scroll/rotary compressor with accessories etc. duly connected separately erected evaporating unit

and blower motor with its accessories by Eco friendly Green gas charging & Internal copper wiring & Remote control ( 3 star and Rupees Eighty Thousand Seven Hundred

above of current year) with necessary core cutting. Thirty One and Thirty Two Paisas Only

(B) for 2 ton capacity

Quantities Total Amount

Quantities Total Amount

Estimated But According

No. Item Description Unit

may Be More Or In Figures Rs.Ps. In Words to Estimated

Less Quantites Rs.Ps.

Providing and erecting Inverter based approved make Cassette type split air-conditioning unit consisting of condensing unit with

fan motor, hermetically sealed scroll/rotary compressor with accessories etc. duly connected separately erected evaporating unit

Rupees One Lacs Thirty One Thousand

and blower motor with its accessories by Eco friendly Green gas charging & Internal copper wiring & Remote control ( 3 star and

211 1.00 131862.57 Eight Hundred Sixty Two and Fifty Seven Ea. ₹

above of current year) with necessary core cutting.

(C) for 3 ton capacity- 1/3Phase

Providing and erecting Inverter based approved make Cassette type split air-conditioning unit consisting of condensing unit with

fan motor, hermetically sealed scroll/rotary compressor with accessories etc. duly connected separately erected evaporating unit

Rupees One Lacs Sixty One Thousand

and blower motor with its accessories by Eco friendly Green gas charging & Internal copper wiring & Remote control ( 3 star and

212 1.00 161215.19 Two Hundred Fifteen and Nineteen Paisas Ea. ₹

above of current year) with necessary core cutting.

(D) for 4 ton capacity- 1/3Phase

Providing comprehensive electrical liaisoning services for the project, including preparation, submission, and follow-up of all

required applications, drawings, test reports, and documents with concerned Gujarat State Government authorities and statutory

bodies such as TORRENT/UGVCL, Electrical Inspectorate, GEDA (if applicable), and other competent departments. The scope

includes coordination for approvals related to load sanction, temporary and permanent power connection, meter installation,

energization, safety approvals, inspection clearances, and compliance with applicable Gujarat Electricity Rules, GERC regulations,

Rupees One Lacs Fifty One Thousand

213 1.00 and relevant IS standards. The item also includes attending meetings, responding to queries, rectification of observations raised by 151500.00 No. ₹

Five Hundred Only

authorities, and obtaining all necessary permissions and completion certificates to ensure timely approval and successful

commissioning of the electrical system, complete in all respects as per government norms and project requirements.

DATA & NETWORKING

Rupees Two Hundred Ninety Four and

214 57.00 SITC of ABS back box 294.92 Ea ₹

Ninety Two Paisas Only

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of Face Plate - Single (Keystone Jack,square)

215 57.00 90.90 Rupees Ninety and Ninety Paisas Only Ea ₹

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling

erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in Rupees Thirty Three and Thirty Three

approved manner as directed Paisas Only

SITC of CAT6 UTP 23AWG Solid: Per Meter Rupees Forty Three and Forty Three

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer Paisas Only

Supply, Installation, Testing, and Commissioning (SITC) oF 1U horizontal cable manager for a 19-inch rack, made of powder-coated

steel with a black finish. The manager shall feature multiple D-rings, typically 5 to 7, to provide organized routing and support for

Rupees Two Hundred Eighty Two and

218 3.00 patch cables. The design should facilitate easy moves, adds, and changes while maintaining proper cable bend radius. Includes all 282.80 Ea ₹

Eighty Paisas Only

necessary M6 cage nuts and screws for mounting.

Supply, installation, and commissioning of a 48-Port 10/100/1000 Mbps Layer 2 Managed Gigabit Switch with 2 SFP uplink ports,

suitable for standard 19” rack mounting. The switch shall support VLAN, QoS, STP/RSTP/MSTP, SNMP, and have a minimum

switching capacity of 56 Gbps. It must include all necessary accessories (mounting kit, power cord, etc.), be UL/CE/FCC Class A Rupees Twenty Two Thousand Sixty Eight

219 1.00 certified, and have an internal power supply. Scope includes delivery, rack installation, configuration, testing, and documentation. 22068.50 Ea ₹

and Fifty Paisas Only

Minimum 3-year OEM warranty required.

SITC of PATCH CORD LC-LC SM DUPLEX LENGTH- 3m

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ] Rupees One Thousand Nine Hundred

One and Eighty Three Paisas Only

SITC of O. F.Cable 06F Outdoor - Armoured Unitube SM - HDPE Sheath [Approved by Competent Authority i.e. not Below the rank

221 50.00 50.50 Rupees Fifty and Fifty Paisas Only Mtr. ₹

of Executive Engineer ]

Quantities Total Amount

Quantities Total Amount

Estimated But According

No. Item Description Unit

may Be More Or In Figures Rs.Ps. In Words to Estimated

Less Quantites Rs.Ps.

Supply, installation, and configuration of a compact firewall device suitable for securing the network. The firewall shall provide

essential security features including stateful packet inspection, basic intrusion prevention, URL filtering, and VPN support for

secure remote access. It must efficiently handle the expected network traffic without impacting performance and support multiple

user profiles and security zones. The scope includes delivery, physical installation, integration with existing network infrastructure, Rupees Eighty Five Thousand Two

configuration according to library security policies, testing, and commissioning. Training for basic operation and administration Hundred Forty Four Only

shall be provided. The device shall come with a minimum one-year warranty and technical support from the OEM.

Supply, installation, testing, and commissioning of complete Wi-Fi system including wireless access points (indoor/outdoor as

specified), wireless controllers, network switches, structured cabling, mounting accessories, PoE injectors or PoE switches as

required, configuration, integration with existing LAN infrastructure, and provisioning for seamless wireless connectivity

throughout the designated area. The system shall support the latest Wi-Fi standards (minimum Wi-Fi 6 / 802.11ax), ensure high-

speed internet access, robust security protocols (WPA3), centralized management, load balancing, roaming capabilities, and Rupees Sixty Thousand Six Hundred

223 4.00 scalability for future expansion. All equipment shall be from approved makes, compliant with relevant industry standards, and 60600.00 Ea ₹

installed as per manufacturer’s guidelines and project specifications. The scope includes necessary civil and electrical works,

testing, labeling, documentation, and training to client personnel, complete in all respects.

Supply, delivery, installation, testing, and commissioning of a new 40‑inch LED/Smart TV for library or display use. The TV should

have a minimum native resolution of Full HD (1920×1080), with built‑in smart functionality (or compatibility with external

streaming devices), at least 2 HDMI ports, USB port(s), and standard audio output connectivity. It should come with a table stand

or wall mounting bracket (as required) along with remote, power cable, user manual, and warranty card (minimum 1 year). The Rupees Thirty Five Thousand Three

supplier shall mount or place the TV at the designated location, ensure it works (inputs, network, picture quality), carry out Hundred Fifty Only

necessary cable routing (power, HDMI etc.), and hand over in fully operational condition with demonstration to staff.

Supply, installation, testing, and commissioning of a 5 MP STQC-certified dome‑type IP CCTV camera with vandal‑proof metal

housing, secure firmware, encrypted video transmission, and compliance with MeitY Essential Requirements; to be fully Rupees Thirteen Thousand Six Hundred

integrated, configured, and commissioned as a complete, operable surveillance unit in accordance with the contract specifications. Thirty Five Only

Supply, installation, testing, and commissioning of a 5 MP STQC-certified bullet‑type IP CCTV camera with vandal‑proof metal

housing, secure firmware, encrypted video transmission, and compliance with MeitY Essential Requirements; to be fully Rupees Fifteen Thousand One Hundred

integrated, configured, and commissioned as a complete, operable surveillance unit per contract specifications. Fifty Only

Supply and installation of a 64-channel Network Video Recorder (NVR) with support for up to 8 SATA hard drives and capable of

handling video input resolutions up to 12MP for both live preview and playback. The NVR shall support H.264/H.265 video

compression, provide simultaneous multi-channel recording and playback, and feature user-friendly interface for remote

Rupees Fifty Eight Thousand Seventy Five

227 1.00 monitoring via web and mobile apps. It must include advanced functionalities such as motion detection, alarm management, and 58075.00 Ea ₹

network redundancy options. The unit shall support PoE ports (if applicable) and be compatible with standard IP cameras.

Supply and installation of 6TB Surveillance-grade Hard Disk Drive (HDD) suitable for continuous 24x7 operation in CCTV/DVR/NVR

systems. The HDD shall be specifically designed for video surveillance applications with enhanced reliability, high write endurance,

and optimized for multiple HD video stream recording. It must support SATA III interface (6 Gbps), have a minimum spindle speed

of 5400 RPM or higher, and include vibration resistance and thermal management features. Scope includes delivery, integration Rupees Fifteen Thousand Eight Hundred

with existing recording system (DVR/NVR), formatting, testing, and ensuring proper recording functionality. HDD must be from a Six and Fifty Paisas Only

Supplying and erecting ceiling speaker with rated power of 6 watt/power tapping 30/15/7.5 watt available,opening angle

Rupees One Thousand Two Hundred

229 64.00 degree H * 77 degree V ,sound pressure level 88 dB ,frequency response of 70Hz to 20KHz 1212.00 Ea ₹

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

Quantities Total Amount

Quantities Total Amount

Estimated But According

No. Item Description Unit

may Be More Or In Figures Rs.Ps. In Words to Estimated

Less Quantites Rs.Ps.

SITC of 16 Zone Standaone Voice Alarm controller 19” 2U rack mount type with Built in Media Player with USB (MP3/ WAV/FLAC), Rupees One Lacs Forty Three Thousand

230 1.00 Bluetooth V5.0, FM Radio functions, SD CARD , Pre-recorded Evacuation messages and fire alarm integration supported 143369.50 Three Hundred Sixty Nine and Fifty Paisas Ea ₹

Supply and installation of a Voice Alarm Call Station designed for emergency communication and public address in safety and

security systems. The call station shall support clear two-way voice communication, with built-in microphone and speaker, and

include features such as call initiation, emergency signaling, and integration capability with existing voice alarm or public address

Rupees Forty Two Thousand Five

231 1.00 systems. It should be rugged, wall-mountable, and compliant with relevant safety standards. Scope includes delivery, installation, 42561.40 Ea ₹

Hundred Sixty One and Forty Paisas Only

wiring, integration with the alarm control system, functional testing, and commissioning. The product must carry a minimum one-

year OEM warranty.

SITC of Power amplifier, 480W [Approved by Competent Authority i.e. not Rupees Thirty Five Thousand Six

232 1.00 Below the rank of Executive Engineer ] 35635.83 Hundred Thirty Five and Eighty Three Ea ₹

Supply, Installation, Testing, and Commissioning (SITC) of: High-quality, low-impedance, 2-core, 1.5 sqmm speaker cable for the

connection of loudspeakers to the voice alarm amplifier/controller. The cable must be suitable for both normal public address and Rupees Twenty Two and Twenty Two

emergency voice alarm applications, ensuring clear and reliable audio signal transmission Paisas Only

FIRE DETECTION SYSTEM Rupees Ninety Three Thousand Seven

234 1.00 Supply & Installation Fire Alarm Panel Addressable Type with Two Loop & With battary Backup 93778.50 Hundred Seventy Eight and Fifty Paisas Ea ₹

Supply & Installation Multisensor Detector(Above)

Rupees Two Thousand Eight Hundred

Twenty Eight Only

Supply & Installation Multisensor Detector(Below)

Rupees Two Thousand One Hundred

Seventy One and Fifty Paisas Only

Supply & Installation Response Indicator Rupees Eight Hundred Fifty Eight and

Fifty Paisas Only

Supply & Installation Manual Call point

238 2.00 707.00 Rupees Seven Hundred Seven Only Ea ₹

Supply & Installation Hooter Rupees Seven Hundred Fifty Seven and

Fifty Paisas Only

Supply & Installation Signal Module Rupees Three Thousand Forty and Ten

Supply & Installation Isolator Module Rupees Two Thousand Four Hundred

Twenty Four Only

Supply & Laying 2 core 1.5 Sqmm FRLS armored Control Cable Rupees Ninety Nine and Ninety Nine

SITC of Digital/ PCM/ TDM EPABX System having SMT design, system with flexible universal slots. Inbuilt Auto

attendant facility, Minimum 150 Nos. conference, Analog extension line, Calling GSM, E&M line, PRI/ EI & VOIP

program me through Analog telephone digital key from Ethernet, public address cord, shall have unrestricted simultaneous

dialing facility, QSIG protocol on PRI, 95/ STD/ ISD/ Local-Locking, Class of Service, Quick Dial-Single Digit dialing of any

two external number, Once only ring device, Chairman/ Secretary - Do not disturb Facility, Power Down Mode, Hot

Line, Hot Outward Dialing, Day Night Mode, Auto Call Back, Barge-in, Call Pick Up,& Call Transfer, Call transfer while Ringing

with Voice Guide System, (DISA), Caller ID (CLI), CLI Base ECF, CLI Base routing Internet Ready Port, External Music Port, Rupees Forty Five Thousand Three

243 1.00 Call Budgeting, Call Most Calculation (ASMDR), DID Direct Inverse Dialing, External Music Input, Fax Homing, Global 45398.49 Hundred Ninety Eight and Forty Nine Ea ₹

Directory Printing with following capacities Paisas Only

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

[A] No of Extension 16, No of Junctions 6, 8 Port IP Resource in-built, 4 Port Web base Video Conferencing, No of expandable ports

: 48, Operators Console - 01 Compatible : ISDN

Quantities Total Amount

Quantities Total Amount

Estimated But According

No. Item Description Unit

may Be More Or In Figures Rs.Ps. In Words to Estimated

Less Quantites Rs.Ps.

Providing & erecting main Distribution (MDF) indoor type, back mounted frame as per DoT standard approved with krone strips(b)

Suitable for 20 pair Rupees One Thousand Three Hundred

Sixty Eight and Fifty Five Paisas Only

Supplying & erecting push button type telephone instrument having speaker phone Caller ID & speaker phone with one touch

memory (min.6 nos.)& 99 memories with display system Single line [[Approved by Competent Authority i.e. not Below the rank of Rupees Eight Hundred Ninety Eight and

Executive Engineer ] Ninety Paisas Only

Electric Motor Driven Hydrant Pump

Supplying,Installing, testing and commissioning of Fire authority approved Electrical driven fire pump suitable for automatic/

manual operation consisting of the following-Rates for erection of pump only Horizontal split casing, high pressure, single/

multistage centrifugal type fire pump having cast iron body, bronze impeller,stainless steel shaft & capable of delivering 1280 LPM

against a total head of 40Mtr while running at 2900 RPM complete with proper connection to suction and delivery line, and

including bypass arrangement for testing of pumps as per the requirement. Suitable mechanical seal with mounting aggangement

shall be included, having a name plate indicating suction, delivery, head, discharge, stages, RPM and direction of rotation. Y

Stainers at pump input shall be provided as per manufacturer requirements. Pump shall be capable of furnishing not less than

150% of rated capacity at a head not less than 65 % of rated head. The shut off head shall not exceed 120% of rated head. Squirrel

Rupees One Lacs Thirty Six Thousand

246 1.00 cage, induction motor, TEFC type suitable for 415 + 10%V, 3 phase, 50 Hz, AC supply, of suitable HP rating for the above pump with 136350.00 set ₹

Three Hundred Fifty Only

synchronous speed of 2900 RPM conforming to IP 55 protection & class 'F' insulation. The motor shall conform to IS 325 1978 (up

to date) with flexible coupling and coupling guard . Factory Fabricated Common base plate for mounting pump and motor

fabricated of mild steel channel as per manufacturer's recommendation with heavy duty Anti Vibration pads (4 Nos., heavy duty).

Grouting bolts to be provided and installed by vendor at his cost Flexible Coupling and coupling guard for direct coupling of pump

and motor. Drain Pipe with Valve Main Fire Pump Discharge : 1280 LPM Pumping Head : 40 M Pump Size : 30 HP Rate should

included interconnection cables and Cable box if reqd for cable conn. to motor.

Electrical Motor Driven Jockey Pump

Supplying,Installing, testing & commissioning of fire authority approved electrically driven Jockey pump suitable for

automatic/manual operation consisting of the following: Horizontal / Vertical mounted multistage jockey pump having cast iron

body, S.S. impeller, stainless shaft with mechanical seal capable of delivering 1280 LPM against total head of 40Mtr while running

at 2900 RPM complete. The system shall be complete with necessary pressure gauge with gun metal shut off cock on delivery side

including bypass arrangement for testing of working of the pumping set as required. The pump should meet the requirement of IS

15105:2002 and must be approved by the local fire authority. Y-Stainers at pump input shall be provided as per manufacturer

requirements. Squirrel cage induction motor suitable for 415 + 10%V, 3 phase, 50 Hz, AC supply of suitable HP rating for the above

pump with synchronous speed of 2900 RPM T.E.F.C type connected to pump with flexible coupling and coupling guard . Factory Rupees Seventy Two Thousand Seven

fabricated Common base plate for mounting pump and motor fabricated of mild steel channel as per manufacturer's Hundred Twenty Only

recommendation with heavy duty 4 Nos. Anti Vibration pads.(Cushy foot) . grouting bolts to be provided and installed by the

vendor at his cost Suitable reinforced cement concrete pump foundations as per manufacturer's design including foundation

bolts, washers as required.

Drain pipe with valve (25 mm dia) Jockey Pump :- Discharge : 1280 LPM

Pumping Head : 40 MTR Pump Size : 10 HP Rate shall include inter connecting cables and cable box if reqd for cable conn to

Diesel Fire Pump

Supplying, Installation, Testing and commissioning of Diesel engine driven fire pump suitable for automatic operation and

consisting of following: Horizontal type, centrifugal End Suction pump of cast iron body & bronze impeller , mechanical seal to

ensure a minimum pressure of 3.5 kg / sq.cm. at highest and farthest outlet at specified flow of 137 m3/Hour@ 40M. head

conforming to IS 1520. with M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. Rupees Three Lacs Forty Eight Thousand

Diesel Fire Pump Four Hundred Fifty Only

Discharge : 1280 LPM

Pumping Head : 40 M

Pump Size : 30 HP

Quantities Total Amount

Quantities Total Amount

Estimated But According

No. Item Description Unit

may Be More Or In Figures Rs.Ps. In Words to Estimated

Less Quantites Rs.Ps.

Fire pump panel (Combined for All Pumps) and electrical works - Starter panel with star delta or as per CFO approved starters rated

to suite pump HP with necessary protection feautres like SPP / ELR / OL / SC / phase and on off indicating lamps. The busbars shall

be of Al - 0.8 A / sq mm size. Panel shall be fabricated from 14G sheet steel with seven tank process powder coated and shall be

min IP 52. Panel shall have Ammeter / Voltmeter and KWh meter. Cabling / earthing from panel to pump shall be scope of vendor

without any extra cost. Cabling - supply / laying and terminating, shall be Al XLPE armoured / Cu XLPE armoured / as per

manufacturers specifications with necessary terminal box to terminate the cables. Panel shall be rated min for 25KA fault level. Rupees Two Lacs Twenty Two Thousand

Cable trays - hot dip GI ladder type 16 gauge with required supports shall be used for cabling. Panel shall have one incomer MCCB / Two Hundred Only

ACB of required rating where by incoming supply and earthing shall be terminated by electrical contractor.Starters shall be suitable

for respective motors.panel to take inputs from pressure switch/on-off switch . Flow switch wiring shall be in suitable mms pvc

consuits. Panel should be manufactured by CPRI approved panel builder

Supply, Installation, testing and commissioning of CAST IRON Y-TYPE STRAINER (flanged) PN-1.6 ; body - C.I., Screen stainless steel Rupees Fifteen Thousand Three

250 1.00 a.150 mm dia 15326.75 Hundred Twenty Six and Seventy Five Each ₹

Supplying,Installing, testing & commissioning of dial type Pressure Guage having 100 mm dial & range of 0-15 Kg/cm2 with

Rupees Two Thousand One Hundred

251 2.00 syphon and cock. 2151.30 Each ₹

Fifty One and Thirty Paisas Only

Supplying,Installing, testing & commissioning of Pressure Switch required accessories

252 2.00 2020.00 Rupees Two Thousand Twenty Only Each ₹

Supply, installation, testing and commissioning of butterfly valve PN 1.6, with s.s seat duly lSI marked complete with Nuts, Bolts,

Rupees Four Thousand Eight Hundred

253 1.00 washers, gaskets, confirming to IS 13095, of following sizes as required.a.150 mm dia 4848.00 Each ₹

Forty Eight Only

Supply, installation, testing and commissioning of butterfly valve PN 1.6, with s.s seat duly lSI marked complete with Nuts, Bolts,

Rupees Four Thousand Six Hundred

254 2.00 washers, gaskets, confirming to IS 13095, of following sizes as required. b.100 mm dia 4646.00 Each ₹

Supply, installation, testing and commissioning of butterfly valve PN 1.6, with s.s seat duly lSI marked complete with Nuts, Bolts,

Rupees Three Thousand Eight Hundred

255 1.00 washers, gaskets, confirming to IS 13095, of following sizes as required. c. 80 mm dia 3838.00 Each ₹

Thirty Eight Only

Supply, installation, testing and commissioning of butterfly valve PN 1.6, with s.s seat duly lSI marked complete with Nuts, Bolts,

Rupees Three Thousand Eight Hundred

256 1.00 washers, gaskets, confirming to IS 13095, of following sizes as required. d.65 mm dia 3838.00 Each ₹

Thirty Eight Only

Supplying,Installing, testing & commissioning of CI dual plate non-return valve of following sizes conforming to IS: 5312 complete

Rupees Five Thousand Two Hundred

257 1.00 with rubber gasket, GI bolts, nuts, washers etc. as required.a.150 mm dia. 5252.00 Each ₹

Supplying,Installing, testing & commissioning of CI dual plate non-return valve of following sizes conforming to IS: 5312 complete

Rupees Four Thousand One Hundred

258 1.00 with rubber gasket, GI bolts, nuts, washers etc. as required. b.65 mm dia 4141.00 Each ₹

Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, M.S. Pipes of Class C

(Medium class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows / reducers /

couplings / unions / bends / flanges etc., and laying on the surface including painting with two coats of anticorrosive primer and Rupees One Thousand Four Hundred

two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications complete as required. Twenty Four and Ten Paisas Only

Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, M.S. Pipes of Class C

(Medium class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows / reducers /

couplings / unions / bends / flanges etc., and laying on the surface including painting with two coats of anticorrosive primer and Rupees One Thousand Two Hundred

two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications complete as required. Thirty Two and Twenty Paisas Only

Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, M.S. Pipes of Class C

(Medium class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows / reducers /

couplings / unions / bends / flanges etc., and laying on the surface including painting with two coats of anticorrosive primer and Rupees Nine Hundred Forty Nine and

two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications complete as required 80 Forty Paisas Only

Quantities Total Amount

Quantities Total Amount

Estimated But According

No. Item Description Unit

may Be More Or In Figures Rs.Ps. In Words to Estimated

Less Quantites Rs.Ps.

Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, M.S. Pipes of Class C

(Medium class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows / reducers /

couplings / unions / bends / flanges etc., and laying on the surface including painting with two coats of anticorrosive primer and Rupees Seven Hundred Seventeen and

two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications complete as required 65 Ten Paisas Only

Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, M.S. Pipes of Class C

(Medium class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows / reducers /

couplings / unions / bends / flanges etc., and laying on the surface including painting with two coats of anticorrosive primer and Rupees Five Hundred Eighty Five and

two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications complete as required 50 Eighty Paisas Only

Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, M.S. Pipes of Class C

(Medium class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows / reducers /

couplings / unions / bends / flanges etc., and laying on the surface including painting with two coats of anticorrosive primer and Rupees Four Hundred Ninety Four and

two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications complete as required 40 Ninety Paisas Only

Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, M.S. Pipes of Class C

(Medium class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows / reducers /

couplings / unions / bends / flanges etc., and laying on the surface including painting with two coats of anticorrosive primer and Rupees Four Hundred Forty Nine and

two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications complete as required 32 Forty Five Paisas Only

Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, M.S. Pipes of Class C

(Medium class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows / reducers /

couplings / unions / bends / flanges etc., and laying on the surface including painting with two coats of anticorrosive primer and Rupees Two Hundred Fifty Two and Fifty

two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications complete as required 25 Paisas Only

Supplying,Installing, testing & commissioning of Weather proof standard fire hose cabinet (750 mm x 600 mm x 300 mm deep)

made out of 16 SWG powder coated M.S. sheet having single or double opening glazed (4.0 mm thick glass) shutter including

necessary locking arrangement by allen key, stove enamelled Fire red finish (as per IS : 5, shade no. 536) with " Fire Hose" marked Rupees Five Thousand One Hundred

on front, suitable for housing 2 nos. 15m long 63 mm dia Hose pipe, 1 No. branch pipe & nozzle spanner (For External Hydrant). Fifty One Only

Supply, Installation, Testing and Commissioning of Weather proof Standard Fire Hose Cabinet wall mounting type (450 mm x

mm x 250 mm deep) having single or double opening with necessary locking arrangement by allan key suitable for housing 1 nos. Rupees One Thousand Eight Hundred

hose pipe, 1 no. Branch pipe & nozzle spanner. Eighteen Only

Supply ,installation, testing and commissioning S.S. Single Headed Fire Hydrant Valve with 80mm N.B. flanged inlet, 63 mm dia

female instantaneous outlet type. S.S. coupling, blankcap, chain, twist release type lug & all accessories Conforming to IS:5290.

269 3.00 Including fixing with supports, flanged tapping from wet riser,orifice plate complete as required by the Local Fire Authority. 3030.00 Rupees Three Thousand Thirty Only Each ₹

Supply, installation, testing and commissioning non-percolating rubber reinforced lined fire Hose pipe (as per IS:903) of 63 mm dia Rupees Three Thousand Two Hundred

and 15 mtrs long. Thirty Two Only

Supply, Installation, Testing and commissioning of 63 mm dia instantaneous pattern aluminium short branch pipe

271 3.00 808.00 Rupees Eight Hundred Eight Only Each ₹

Supply, installation, testing and commissioning of First Aid Hose Reel equipment conforming to IS:884 comprising of hose reel

drum, 8 mm shut off nozzle, Rubber hose reel tubing as per IS: 444 of 25 mm dia x 45 mtr. long, painting, Manual fix type with Rupees Four Thousand One Hundred

fixing bracket, anchor fastener, bolts & nuts etc. complete as required by Local Fire Authority. Forty One Only

Supply, installation, testing and commissioning of SS Ball Valve.

273 3.00 808.00 Rupees Eight Hundred Eight Only Each ₹

Supply, installation, testing and commissioning of Cast lron Four Way Fire Brigade Inlet as per IS:904 having 63 mm dia inlet with

Rupees Four Thousand Eight Hundred

274 1.00 blank cap and chain with necessary fittings, flanges, nut bolts etc. complete as required. 4848.00 Each ₹

Forty Eight Only

Quantities Total Amount

Quantities Total Amount

Estimated But According

No. Item Description Unit

may Be More Or In Figures Rs.Ps. In Words to Estimated

Less Quantites Rs.Ps.

Supply, Installation, Testing and Commissioning of Gun Metal Air Release Valve with necessary fittings. Size: 25 mm (For Riser) Rupees Three Thousand Five Hundred

Thirty Five Only

Supply, Installation, Testing and commissioning of Quartzoid Bulb type Sprinkler Heads. (a) Pendent Sprinkler 57°C - standard Rupees Three Hundred Fifty Three and

response Fifty Paisas Only

Supply, installation, testing and commissioning of ABC type Fire Extinguisher of 6.0 kg confirm to IS:15683, with ISI marked / TAC

Rupees One Thousand Four Hundred

277 2.00 approved fitted with required accessories including wall suspension brackets. 1424.10 Each ₹

Twenty Four and Ten Paisas Only

Supply, installation, testing and commissioning of Carbon Dioxide (Co2) type Fire Extinguisher of 4.5 kg confirm to IS:15683, with

Rupees Three Thousand Eight Hundred

278 2.00 ISI marked / TAC approved fitted with required accessories including wall suspension brackets. 3838.00 Each ₹

Thirty Eight Only

Supplying,Installing, testing & commissioning of fire alarm and pump trigger system as per requirement and specification

279 2.00 606.00 Rupees Six Hundred Six Only Each ₹

consisting of following items. Manual call point:

Supplying,Installing, testing & commissioning of fire alarm and pump trigger system as per requirement and specification Rupees Seven Hundred Fifty Seven and

consisting of following items. Hooters: Fifty Paisas Only

Supplying,Installing, testing & commissioning of fire alarm and pump trigger system as per requirement and specification

281 2.00 505.00 Rupees Five Hundred Five Only Each ₹

consisting of following items. Pump On / Off switch:

Supplying,Installing, testing & commissioning of fire alarm and pump trigger system as per requirement and specification

282 60.00 consisting of following items. 4 core 1.5 sq.mm cu. Flexinble wire 30.30 Rupees Thirty and Thirty Paisas Only MTR ₹

Providing and fixing M.S. structural work fabricated from standard sections, (MS rounds, angles, channels etc.) including cutting to

size, drilling, welding, including cost of fasteners, clamps in RCC structural members as directed, including two or more coats of

Rupees One Hundred Six and Five

283 30.00 synthetic paint over one coat of primer after surface preparation including cutting and making good walls (Structural other than 106.05 kg ₹

Painting of above ground lines with two coats of red oxide primer and two coat of sinthetic enamal paint (PO.Red)

284 5.00 707.00 Rupees Seven Hundred Seven Only Lot ₹

Supplying of AUTOGLOW Signages in Block / Small Letters of Specified Sizes: Fire lift size: 4" X 12" Rupees Two Hundred Fifty Two and Fifty

Supplying of AUTOGLOW Signages in Block / Small Letters of Specified Sizes: Fire Hydrant: 4" X 12" Rupees Two Hundred Fifty Two and Fifty

Supplying of AUTOGLOW Signages in Block / Small Letters of Specified Sizes: "DCP" Extinguisher: 8" X 4" Rupees One Hundred Fifty One and Fifty

Supplying of AUTOGLOW Signages in Block / Small Letters of Specified Sizes: "CO2" Extinguisher: 8" x 4" Rupees One Hundred Fifty One and Fifty

Supplying of AUTOGLOW Signages in Block / Small Letters of Specified Sizes: In case of Fire, do not use lift, use staircase: 8" x 8" Rupees Three Hundred Fifty Three and

Fifty Paisas Only

Providing and Supplying Fowler bed should have Overall dimension: (L) 2138 x (W) 908 x (H) 559mm Functions: Two function bed

with adjustable backrest 70deg and upper leg rest 24deg Head board and foot board: 25.4 mm dia 1.2 mm thick ss202 made tube

with 18 mm thick PLT board. Bed frame: bed frame is made of MS ERW rectangular section tube of size 30mmx60mm of 1.6mm

thick. it has Provisionision 4 iv pole holders. It is strengthened by rectangular tube section of size 60mmx30 mm having 1.6 mm

thickness leg Under Structure: ERW round tubes used with thickness of 1.2mm with section 31.75 mm dia. Lying surface: Lying

surface made of MS ERW of thickness of 1.0 mm thick. This lying surface have 4 sections for bed profiling i.e. back adjustment,

fixed pelvic section, upper and lower leg adjustment. Lower leg rest section is provisioned with Ratchet for leg rest adjustment.

Mattress platform is strengthened by tubular frame of size 25.4mm dia x 1.2mm thickness. It is strengthened by trapezoidal

contour (rounded corner) 16 nos, embossed cut out. All metal components are pre treated with zinc phosphating and then powder

coated with epoxy polyester powder coating. Mechanism: All functions are operated with lead screw mechanism, ACME threaded Rupees Thirty Eight Thousand Three

EN8 made 6mm pitch for easy in movement. Castors: High endurance, metal castors of 125mm dia having Provisionision for Hundred Eighty Only

diagonal locking with stem dia 22mm should be provisioned for better stability. Powder coating: Anti rust, thermosetting epoxy

polyester powder coating should be used. All powder coating is in Ral White. Maximum weight: Maximum safe working load is

kg. Handle: All the functions are operated with the help of single ergonomically handle, which are made of metal inserted PP co

polymer, it's lever is snap locked when not in use. All the handles are Provided with operating guidance stickers. welding: To

ensure quid quality welding "Co2 Argon" process is adhered to. powder coating: All metal components are pre treated with zinc

phosphating in 7 tank process and then powder coated with epoxy polyester powder coating. packing: goods are supplied in

knocked down construction to reduce carbon emission. In house test report: proof loading test, cycle tests, impact test, horizontal

and vertical load tests for side rails, salt spray test, castor break test, pull test for head and foot board. The rate shall include all

materials, hardware, and labour etc. complete as per instruction of engineer-in charge.

Quantities Total Amount

Quantities Total Amount

Estimated But According

No. Item Description Unit

may Be More Or In Figures Rs.Ps. In Words to Estimated

Less Quantites Rs.Ps.

Providing and Supplying Plain Bed Classic with size 1970 x 905 x 560 mm (77.5" x 35.5" x 22"). Platform size shall be 1905 x

mm (75" x 33"). The bed shall have 3 section CRCA top of 1.25 mm thickness. It shall be provided with detachable SS head and foot Rupees Twelve Thousand Six Hundred

291 26.00 end bows with laminated panels. IV provision shall be available with polymer insert.as per Engineer-In-Charge etc. completed. 12625.00 Nos. ₹

Twenty Five Only

Providing and Supplying of round stool should have of round stool. Overall dimension should be Diagonal Leg Dia 538 mm H470

min-655max. Top plate made of SS 304 made sheet with spin section of thickness 1mm and non corrosive. It has a diameter of

305mm, seat base made of MS ring and rectangular tube. EN8 Screw having dia of 22 mm is used for height adjustment of the seat

base. The round hub made of MS ERW tube having dia of 38mm and thickness 2 mm. The Hub is welded with the legs and it

accommodate and cover the lead screw mechanism. The under-structure consist of 4 legs made up of MS ERW tube of diameter Rupees One Thousand Five Hundred

292 42.00 25.4 mm and 1.6mm thick. The press formed pipe leg give a round and clean look. All the legs is Provided with 4 nos of Nylon-6 1565.50 Nos. ₹

Sixty Five and Fifty Paisas Only

bush. All metal components are pre treated with zinc phosphating in 7 tank process and then powder coated with epoxy polyester

powder coating. Safe working load is 135kg. The rate shall include all materials, hardware, and labour etc. complete as per

instruction of engineer-in charge.

Providing and Supplying Glass door storwel and should be mandatorily submitted along with Bid. glass door storwel should be

mandatorily submitted along with Bid shall have an overall size of 916mm(W)x486mm(D)x1980mm(H) with welded construction.

It should have shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other

components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513.

The glass door storwel shall have a brass handle and a 2 way locking mechanism with shooting bolt. It should have a height wise

Rupees Eight Thousand One Hundred

293 5.00 adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw 8144.64 Nos. ₹

Forty Four and Sixty Four Paisas Only

type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty

of colour options and shelving options shall be available. The rate shall include all materials, hardware, and labour etc. complete as

per instruction of engineer-in charge.

Providing and Placing of Dust bin of approved brand Sintex or equivalent of 5 Liter Capacity as per instruction of engineer-in

Rupees Seven Hundred Twenty Seven

and Twenty Paisas Only

Providing and Supplying Foldable wheel chair should have Foldable wheel chair with Over all dimension should be (L) 790 x (W)

600 x (H) 870mm Foldable frame structure should be made of section 22x1.2mm A3 carbon steel with chrome finish. Cross bar

should be made of A3 carbon steel with section 25.4 x 1.2mm. The Rear wheel should be made of 24 inch Solid mag wheels with

alloy in the rim. Integrated handrim shoud be provided to drive the wheel chair of section 16x1.2mm A3 carbon steel with chrome

finish. The front wheel should be of 8 inch HUB made of PA polymer and outer with solid rubber. PU molded arm rest and base

should be made of ABS for better arm support. There should be Leatherite strap for calf rest and leatherite cushion for seat. The Rupees Sixteen Thousand Four Hundred

foot rest should be Adjustable alluminimum die cast foot rest with updown and swivel type mechanism and Push Handles should Fifty Two and Ninety Paisas Only

be made of moulded rubber grip to push the wheelchair. Hand brakes should be provided to lock the wheelchair at desired

location. The finsih of chair should be antirust chrome. The rate shall include all materials, hardware, and labour etc. complete as

per instruction of engineer-in charge.

Providing and Supplying mattress should have Mattress with Overall dimension should be (L)1415 mm*(W)785 mm*75 mm(H).

Mattress is with 40 density 75 mm thick Single section PU foam mattress which is covered by heavy helium material which is water

proof, flame retardant, vapour and X-ray permeable. The zip and stitches for the mattress cover is concealed. The rate shall include Rupees Two Thousand Nine Hundred

all materials, hardware, and labour etc. complete as per instruction of engineer-in charge. Seventy Nine and Fifty Paisas Only

Providing and Supplying storwel with Storwel plain with Gordian Lock shall have an overall size of

916mm(W)x486mm(D)x1981mm(H) with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of

0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These

components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The Storwel Plain should have a Mazak handle and

Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Rupees Eight Thousand One Hundred

Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The Forty Four and Sixty Four Paisas Only

finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options

shall be available. The rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge.

Quantities Total Amount

Quantities Total Amount

Estimated But According

No. Item Description Unit

may Be More Or In Figures Rs.Ps. In Words to Estimated

Less Quantites Rs.Ps.

Side table of size 750 x 450 x 750 mm. The storage unit should be of knock-down type. The side table should have provision for

storage, and be opened by swing doors. The side drops should be from 19 mm thick ply with 5–6/19mm wooden lipping. The top

should be from 37.5 mm thick MDF or ply, which is postformed. In absence of postformed edges, wooden edging may be accepted

Rupees Four Thousand Seven Hundred

at the discretion of consultant. Side table should have 125mm high drawers and rest as shutters shown in the drawing and may

298 4.00 4723.77 Twenty Three and Seventy Seven Paisas Nos. ₹

vary in design at the time of execution. The side table should be on lockable PVC castors of approximately 70 mm. Doors should be

lockable with 2 keys for each lock. 750 x 450 x 750 mm as per detailed drawing.

Providing and Placing Office Modular System * PROVIDING AND FIXING 52.4MM THICK 1200 MM HIGH PANELS ALONG SPINE IN

WISH SYSTEM WITH COMBINATION OF METAL RACEWAY AT BOTTOM, TWO INTERMEDIATE FABRIC BLOCKS, TOP TILE - FABRIC

TACKABLE, WHITE BOARD, PROVIDING POWDER COATED LEGS * PROVIDING 22.8 MM THICK PANEL WITH BOTTOM METAL Rupees Twenty Eight Thousand Five

299 4.00 SCREEN, INTERMEDIATE FABRIC SCREENS and TOP SCREEN IN FABRIC MAGNETIC FINISH, PENTAGONAL WORKSURFACE - 1500 W1 28552.70 Hundred Fifty Two and Seventy Paisas Nos. ₹

X 1500 W2 X 600 D - PROVIDING 25 MM THICK PRELAMINATED PENTAGONAL WORKTOP WITH PVC LIPPING, METAL KBPT and CPU Only

PROVIDING AND PLACING 52.4MM THICK 1200 MM HIGH PANELS ALONG SPINE IN WISH SYSTEM WITH COMBINATION OF METAL

RACEWAY AT BOTTOM, TWO INTERMEDIATE FABRIC BLOCKS, TOP TILE - FABRIC TACKABLE, WHITE BOARD, PROVIDING POWDER Rupees Eighteen Thousand Five

300 8.00 COATED LEGS. * PROVIDING 22.8 MM THICK PANEL WITH BOTTOM METAL SCREEN, INTERMEDIATE FABRIC SCREENS and TOP 18533.50 Hundred Thirty Three and Fifty Paisas Nos. ₹

SCREEN IN FABRIC MAGNETIC FINISH. Work Station of size 1500 X 600. Only

Providing and Supplying main table with ERU. Supplying and placing in position Main Table with ERU of the following

specifications. Its size shall be 1650 Width x 700 Depth x 743 Height (Main Desk) and 1000 Width x 450 Depth x 743 Height (ERU).

Top shall be of 18 mm thickness made of PLT board with 2 mm edge banding. Wenge and Savannah Maple PLT board shall be

used. The understructure shall be in pre-laminated panels made with PLT boards. 2-Drawer and 3-Drawer storage units with Rupees Nineteen Thousand Four

301 3.00 different combinations to support tops made with 18 mm PLT boards of different colours. Modesty and back panels made with 18 19462.70 Hundred Sixty Two and Seventy Paisas Nos. ₹

mm PLT boards. The pedestals/storages shall be fitted with necessary locks. The rate shall include all materials, hardware, and Only

labour etc. complete as per instruction of engineer-in charge.

Providing and Supplying main table with ERU. Main Table with ERU of the following specifications. Its size shall be 1650 Width x

700 Depth x 743 Height (Main Desk) and 1000 Width x 450 Depth x 743 Height (ERU). Top shall be of 18 mm thickness made of PLT

board with 2 mm edge banding. Wenge and Savannah Maple PLT board shall be used. The understructure shall be in pre-

laminated panels made with PLT boards. 2-Drawer and 3-Drawer storage units with different combinations to support tops made

Rupees Twenty Eight Thousand Seven

302 1.00 with 18 mm PLT boards of different colours. Modesty and back panels made with 18 mm PLT boards. The pedestals/storages shall 28785.00 Nos. ₹

Hundred Eighty Five Only

be fitted with necessary locks. The rate shall include all materials, hardware, and labour etc. complete as per instruction of

engineer-in charge.

Providing and Placing curtain (cotton fabric of rate Rs. 400 per smt + support cotton cloth) with SS 202 garde rod of 40mm dia with

Rupees Six Hundred Eighty One and

303 97.20 SS ring etc complete. Rate including fabric, fitting and accessories of approved make. 681.75 Sqmt ₹

Seventy Five Paisas Only

Providing and Placing Photo with Frame, Size : 600 X 400 Providing and Fixing Photo Frame made of Teakwood Border Patti of size

25x25 with melamine polish finish with 3 mm glass and inside the picture on Photo paper with high resolution picture quality and

304 15.00 sticked on MDF as selected by engineer-in-charge including all necessary fixture, fasteners,labour , material etc comp. 2020.00 Rupees Two Thousand Twenty Only Nos. ₹

Providing and Fixing 3 Seater Pero Cross Beam made of black powder coated regular MS ERW tube having 8.0+/-0.03 cm x 4.0 +/-

0.03 cm x 0.2 +/-0.014 cm size. Legs to be chrome plated made of rolled steel with 0.12 +/-0.013 cm thickness. Seat and Back Shell

to be perforated made from cold rolled M.S. Sheet (DIN 1623 Part 1 ST-12 Grade), 0.14 +/-0.013 cm thickness. The side bar is made Rupees Eleven Thousand Five Hundred

of chrome plated solid steel 3.0 cm +/-0.03 cm x 1.2 cm +/-0.03 cm with fluting and plastic inserts. The shell to be assembled on Eighty Nine and Seventy Five Paisas Only

the cross beam with help of M8 bolts.

Quantities Total Amount

Quantities Total Amount

Estimated But According

No. Item Description Unit

may Be More Or In Figures Rs.Ps. In Words to Estimated

Less Quantites Rs.Ps.

Providing and Supplying office table of the following specifications. Its size shall be 1500 Width x 750 Depth x 740 Height. The top

shall be made from 25 mm thick pre-laminated board. All the edges are sealed with 2 mm thick PVC edge band all around. Side

panels shall be made from 25 mm thick pre-laminated particle board. All the edges are sealed with 2 mm thick PVC edge band on

the user side and 0.8 mm on the top and bottom side. The side panels have 2 glide screws each for levelling of the desk. Modesty

panel shall be made from 18 mm thick pre-laminated particle board. All the edges are sealed with 0.8 mm thick PVC edge band all

around. Freestanding pedestal shall be made from 18 mm pre-laminated particle board with a combination of 2 mm and 0.8 mm Rupees Seven Thousand Eight Hundred

PVC edge band on all the exposed surfaces as per requirement. The drawers are provided with suitable slides for smooth Seventy Eight Only

operation. All the pedestal drawers are centrally locked with a single key. Drawer slides are of Hettich. The rate shall include all

materials, hardware, and labour etc. complete as per instruction of engineer-in charge.

Providing and Supplying reception table. Reception table of the following specifications. Work Surface - Made of 25mm thick pre-

laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, edge banded with matching 2 mm thick

PVC lipping. Access flap along with a grommet is provided on work surface for wire management. Wire Management - Power box

made with 0.8 mm thick CRCA (IS: 513), with switch plate (8+3 module cut out provision for Anchor Roma) which is fixed with

worktop along the width at access flap position. Modesty panel and side skirting - Made of 25mm thick pre-laminated twin board

of E1-P2 grade and approved shade confirming to IS-12823:1990, edge banded with matching 2 mm thick PVC lipping.

Understructure - Made of 18mm thick pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990,

edge banded with matching 2 mm thick PVC lipping. Top shelf - Made of 18mm thick pre-laminated twin board of E1-P2 grade and

approved shade confirming to IS-12823:1990, edge banded with matching 2 mm thick PVC lipping. Hinge door + drawer unit -

Made of 18mm thick pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, edge banded Rupees Fifty One Thousand Eight

with matching 2 mm thick PVC lipping, drawer bottom is made of 5.5 mm thick MDF white board and handle is provided for ease Hundred Thirteen Only

of opening. HDU and drawer is provided with cam lock for security. Essential accessories - Wire riser made of 0.8 mm CRCA (IS-

513) is provided for proper wire management, organizer plate made of 1.2 mm CRCA (IS-513) is provided for magnetic sticky

notes, bag hanger hook made of 1.2 mm CRCA (IS-513) is provided for bag hanging. Length - 2400 mm, Depth - 1770, 870 mm,

Height - 1080 mm. The rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge.

Providing and Supplying High Back Chair. SEAT/BACK ASSEMBLY: The seat is made up of 1.2 ± 0.1 cm thick hot pressed plywood.

The back is made up of injection moulded glass filled nylon and upholstered using mesh fabric with high tenacity yarn. Seat size:

47.0 cm (W) x 51.5 cm (D). Back size: 45.0 cm (W) x 65.3 cm (H). High resilience (HR) polyurethane foam: The HR polyurethane seat

foam is moulded with density 45 ± 2 kg/m³ and hardness 16 ± 2 kgf as per IS:7888 for 25 percent compression. Armrests: The

adjustable armrest is designed with up-down adjustment in 8 steps (8.0 ± 0.5 cm range), height adjustable armrest structure which

is powder coated and fitted with an armrest top, and fixed armrest top is PU moulded over metal insert. Lumbar support assembly:

The lumbar support consists of polypropylene pad with moulded polyurethane foam and covered with polyester fabric, with

height adjustment of 8.0 ± 0.5 cm through two projecting knobs provided on the rear side. Front pivot synchro mechanism: The

adjustable tilting mechanism is designed with 360° revolving type, single point control, front pivot for tilt with feet resting on

ground ensuring more comfort, tilt tension adjustment, 4-position locking with anti-shock feature, and seat/back tilting ratio of Rupees Twelve Thousand Two Hundred

1:2. Pneumatic height adjustment: The pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3 cm. Pedestal Ninety Two and Seventy One Paisas Only

assembly: The pedestal is injection moulded in black 30 percent glass filled nylon and fitted with 5 nos. twin wheel castors, with

pedestal pitch center dia of 66.1 ± 0.5 cm. Twin wheel castors are injection moulded in black nylon. Neckrest: The neckrest

assembly consists of polypropylene pad with moulded polyurethane foam and covered with polyester fabric, fixed to back

assembly through neckrest connector, with height adjustment of 4.2 ± 0.5 cm and rotation adjustment of overall 76° ± 2°, and is

retrofitted to the main chair. The rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-

Quantities Total Amount

Quantities Total Amount

Estimated But According

No. Item Description Unit

may Be More Or In Figures Rs.Ps. In Words to Estimated

Less Quantites Rs.Ps.

Providing and Supplying Mid Back Chair. SEAT/BACK ASSEMBLY: The seat is made up of 1.2 ± 0.1 cm thick hot pressed plywood.

The back is made up of injection moulded glass filled nylon and upholstered using mesh fabric with high tenacity yarn. Seat size:

47.0 cm (W) x 51.5 cm (D). Back size: 45.0 cm (W) x 65.3 cm (H). High resilience (HR) polyurethane foam: The HR polyurethane seat

foam is moulded with density 45 ± 2 kg/m³ and hardness 16 ± 2 kgf as per IS:7888 for 25 percent compression. Armrests: The

adjustable armrest is designed with up-down adjustment in 8 steps (8.0 ± 0.5 cm range), height adjustable armrest structure which

is powder coated and fitted with an armrest top, and fixed armrest top is PU moulded over metal insert. Lumbar support assembly:

The lumbar support consists of polypropylene pad with moulded polyurethane foam and covered with polyester fabric, with

height adjustment of 8.0 ± 0.5 cm through two projecting knobs provided on the rear side. Front pivot synchro mechanism: The

Rupees Eleven Thousand Three Hundred

309 20.00 adjustable tilting mechanism is designed with 360° revolving type, single point control, front pivot for tilt with feet resting on 11348.36 Nos. ₹

Forty Eight and Thirty Six Paisas Only

ground ensuring more comfort, tilt tension adjustment, 4-position locking with anti-shock feature, and seat/back tilting ratio of

1:2. Pneumatic height adjustment: The pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3 cm. Pedestal

assembly: The pedestal is injection moulded in black 30 percent glass filled nylon and fitted with 5 nos. twin wheel castors, with

pedestal pitch center dia of 66.1 ± 0.5 cm. Twin wheel castors are injection moulded in black nylon. The rate shall include all

materials, hardware, and labour etc. complete as per instruction of engineer-in charge.

Providing and Supplying Cushion Back High Back Chair. SEAT/BACK ASSEMBLY: The seat/back shall be made up of 1.2 ± 0.1 cm

thick hot pressed plywood, upholstered with fabric and moulded polyurethane foam together with moulded seat and back covers.

The back foam shall be designed with contoured lumbar support for extra comfort. Back size - 50.0 cm (W) x 72.0 cm (H). Seat size -

50.0 cm (W) x 46.5 cm (D). High resilience (HR) polyurethane foam: The HR polyurethane foam should be moulded with density

± 2 kg/m³ and hardness load 16 ± 2 kgf for 25 percent compression. Seat/back covers: The seat cover shall be injection moulded in

black co-polymer polypropylene and back cover should be vacuum formed from ABS sheets. Armrests: The one-piece armrests

shall be made of black integral skin polyurethane with 50–70 Shore ‘A’ hardness and reinforced with M.S. insert, scratch and

weather resistant, and fitted to the seat with seat/armrest connecting strip assembly made of 0.5 ± 0.05 cm thick HR steel. Center

tilt mechanism: The center tilt mechanism shall be designed as 360° revolving type, 17° ± 2° maximum tilt on pivot at center,

upright position locking, and tilt tension adjustment. Pneumatic height adjustment: The pneumatic height adjustment shall have Rupees Two Thousand Six Hundred

an adjustment stroke of 12.0 ± 0.3 cm. Telescopic bellow assembly: The bellow shall be 3 piece telescopic type and injection Eighty Six and Sixty Paisas Only

moulded in black polypropylene. Pedestal assembly: The pedestal shall be injection moulded in black 33 percent glass-filled Nylon-

66 and fitted with 5 nos. twin wheel castors, with pedestal size 66.3 ± 0.5 cm (76.3 ± 1.0 cm with castors). Twin wheel castors shall

be injection moulded in black nylon. Overall dimensions of chair: Seat height - min 44.2 to max 54.2 cm, height - min 103.3 to max

115.3 cm, width and depth of chair as measured from pedestal - width 76.3 cm and depth 76.3 cm. The rate shall include all

materials, hardware, and labour etc. complete as per instruction of engineer-in charge.

In Wards: - Rupees Eight Crore Thirty-Two Lakh Eight Thousand One Hundred Thirty-Five Only

Credit Value:….Less Value

(This Item no Shall not quote less value than Credit Value in Tender I.e. Rs /-) ,(Up set Value of the salvaged items

of .Rs /- the Credit Value to be quoted shall not be less then upset value mentioned above the quoted amount shall be

deducted from the Contractor's First R.A.Bill) As Per Valuation Report

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in

S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost

of difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender. Input rate is Rs. 5234 MT.

5 GST extra applicable in case of work based on SOR 2024-25 only.

6 Servicable materials available after Demolishing / Dismentalling any item should be hand over to the concerned as per instruction of PIU engineer in charge.

Quantities Total Amount

Quantities Total Amount

Estimated But According

No. Item Description Unit

may Be More Or In Figures Rs.Ps. In Words to Estimated

Less Quantites Rs.Ps.

Deputy Executive Engineer Executive Engineer

PIU, Zone-1, Rajkot PIU, Zone-1, Rajkot

Deputy Executive Engineer (Ele.) Executive Engineer (Ele.)

PIU, Zone-1, Rajkot PIU, Zone-1, Rajkot