CONSTRUCTION OF COMBIND OFFIC BUILDING DADA SIBA

Amount

Excavation in foundation trenches etc. in earth work in all kinds of classification of soil such as pick work, jumper work, pick jumper work, blasting work in jumper blasting work soft and hard blasting work in saturated soil, including chiseling or wedging out rock where blasting is prohibited, or any other mixed variety of soil including shoring, strutting, de-watering and pumping or bailing out water (surface and sub soil water) upto any depth or any quantum of water including slush which may arise during dewatering, removal of slush and stacking the excavated soil clear from the edge of excavation with in all leads, as directed by Engineer-in-Charge and then returning the stacked soil in 15cm (fifteen centimeters) layers when required into plinths, sides of foundations etc. consolidating each deposited layer by ramming watering and then disposing of all surplus excavated earth as directed by Engineer-in-Charge with in all leads and lifts, disposed earth to be levelled and neatly dressed including carriage of materials within all leads and lifts. The rate is inclusive of Octroi, Royality, Malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Excavation in drains and channels etcetra in earth work in all kind of classification of soil such as pick work, jumper work, pick-jumper work, blasting work, soft and hard blasting and saturated soil, including chiselling or wedging out rocks where blasting work is prohibited or any other mixed variety of soil includinig shoring, strutting, de-watering and pumping or bailing out water (surface and sub soil water) upto any depth or any quantum of water including slush which may arise during de-watering or removal of slush, lift upto any height stacking the excavated soil clear from the edge of excavation and then returning the stacked soil in 15cm (fifteen centimetre) layers when required into plinths, sides of foundation etcetra consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as per specification, approved drawings, design as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Octroi, Royality, Malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Filling in plinth with sand under floors including watering ramming, consolidating and dressing complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights. below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in foundation footings, basis of columns etcetera and mass concrete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Columns, pillars, posts and struts, (square, rectangular/ polygonal in plan), up to all floor level as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers, girders and lintels, sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto any depth/heights, up to all floor level as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, heights of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors, roofs, landings, shelves, and the like floor, etcetra. up to any thickness, up to all floor level as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in stairs cases with slopping or stepped soffits, excluding, landing, up to all floor level as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering, strutting and propping etc, with wooden battens and ballies, heights of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Vertical surfaces such as walls (any thickness) partition and the like including attached pillasters, buttresses, plinth and string courses and the like, up to all floor level, complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, heights of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls upto any width, up to all floor level complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:4:8 (one cement isto four sand isto eight graded crushed stone aggregate 40mm (Forty millimeter) nominal size) and curing complete, in or under water, including pumping or bailing out water/dewatering, removal of slush which may arise at the time of laying under water complete excluding the cost of form work in foundation and plinth in all depths/heights as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying cement concrete 1:3:6 ( One Cement isto Three Sand isto Six graded crushed stone aggregate 40 mm (forty milimetre) nominal size mechanically mixed and curing complete excluding the cost of form work. in foundation and plinth as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (Twenty millimeter) nominal size) and curing complete, in or under water, including pumping or bailing out water/dewatering, removal of slush which may arise at the time of laying under water complete excluding the cost of form work in foundation and plinth in all depths/heights as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced concrete work Grade M-20 (Twenty) design mix to obtain the minimum compressive strength of 20 N/mm2 (twenty newton) per square millimeter with cement contents not less than 330 kg (three hundred thirty) Killogram per cubic meter and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in foundation footings, bases of columns etcetera and the like mass concrete complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced concrete work Grade M-20 (M-Twenty) design mix to obtain the minimum compressive strength of 20 N/mm2 (twenty newton) per square millimeter with cement contents not less than 320kg (three hundred twenty) Killogramme per cubic meter and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in columns, pillars, posts and struts in all depths/thickness and upto all floor level complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced concrete work Grade M-20 (Twenty) design mix to obtain the minimum compressive strength of 20 N/mm2 (twenty newton) per square millimeter with cement contents not less than 320 Kg (three hundred twenty) Killogramme per cubic meter and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in suspended floor roofs, landings and shelves and their supports, balconies, beams, girders, bressumers cantilevers and the like shelves and work tops etcetera in all upto all floor level complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced concrete work Grade M-20 (M-Twenty) design mix to obtain the minimum compressive strength of 20 N/mm2 (twenty newton) per square millimeter with minimum cement contents of 330 kg (three hundred thirty) Killogramme per cubic meter and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in walls (any thickness) including attached pilasters buttersses,plinth and string courses etcetra complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced concrete work Grade M-20 (M-Twenty) mix designed to obtain the minimum compressive strength of N/mm² (twenty newton) per millimeter square with cement contents not less than 320kg (three hundred twenty) Killogramme per cubic meter and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in stair cases (except spiral stair cases) excluding landing but including preparing of top surface and finishing of nosing up to all floor level complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying reinforced cement concrete of grade M-20 (M-Twenty) design mix to obtain the minimum compressive strength of 20 N/mm² (Twenty newton per square milimetre) with cement contents not less than 320 kg (Three hundred twenty Kilogrammes) per cubic metres mechanically mixed and vibrated including curing complete to give an even smooth surface including centering and shuttering etc. but excluding cost of reinforcement as in mouldings as in cornices windows sills etcetra not exceeding 15cm (Fifteen centimetre) in girth above Plinth level to all floorl levels complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying reinforced cement concrete of grade M-20 (M-Twenty) design mix to obtain the minimum compressive strength of 20 N/mm² (Twenty newton per square milimetre) with cement contents not less than 320 kg (Three hundred twenty Kilogrammes) per cubic metres mechanically mixed and vibrated including curing complete to give an even smooth surface including centering and shuttering etc. but excluding cost of reinforcement as in string courses, coping, bed plates, anchor blocks, plain windows sills and the like etcetra above Plinth level to all floorl levels complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete work Grade M-20 (M-Twenty) design mix to obtain minimum compressive strength of 20 N/mm2 (twenty newton) per square millimetre with cement contents not less than 320kg (three hundred twenty) Killogram per cubic metre for reinforced concrete chhajjas of any thickness upto all floor levels, including finishing the exposed surface with cement mortar 1:3 (one cement isto three sand) to give a smooth and even surfaces, including centering/form work and curing complete, excluding the cost of reinforcement complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying Tor steel reinforcement for Reinforced Cement Concrete work including bending, binding and placing in position complete including cost of binding wire and other incidentals for its completion up to all floor level complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Brick work using Second class common burnt clay buildings bricks in foundation and plinth in mud mortar complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Brick work using Second class common burnt clay buildings bricks in foundation and plinth in cement mortar 1:4 (one cement isto four sand) and curing complete complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Brick work using Second class common burnt clay buildings bricks in super-structure above plinth level upto all floor level in cement mortar 1:6 (one cement isto six sand) and curing complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Second class half brick work using common burnt clay building bricks in foundation and plinth in cement mortar 1:3 (one cement isto three sand) and curing complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Second class half brick work using common burnt clay building bricks in foundation and plinth in cement mortar 1:4 (one cement isto four sand) and curing complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Second class half brick work using common burnt clay building bricks in super structure above plinth level upto all heights/floor level in cement mortar 1:4 (one cement isto four sand) and curing complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Stone filling dry hand packed tightly, under floors, behind retaining wall/filter chamber/soak pit complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing first class Indian teak wood in frames of doors, windows, clerestory, windows and other frames wrough, framed and fixed in position complete upto all floor level as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing second class deodar wood work in false ceiling etcetra sawn and put-up in position with necessary fittings complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing penalling upto 2.05mtr. (Two point zero five metre) height of 8mm (Eight millimetre) thick ply over 50x31mm (Fifty into thirty one millimetre) soft wood grid frame work at the rate 600mm (Six hundred millimetre) centre to centre with decorative teak wood beading over teak ply of size 25x12mm (Twenty five into twelve millimetre) heaving moulding on both side. The cornics/edging on the top of pennaling to be finished with 55x30mm (Fifty five into thirty millimetre) teak wood beading complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 25mm (Twenty five millimetre) thick water proof commercial board of Centuary/ Kitply/Dura Ply/Marino (ISI marked) for Dias inside of table shall be made of 19mm thick including Draws, Vertical portions and cabinet work . The table top, vertical portion of table towards the public side and all other side towards silling shall be finished with 3mm (Three millimetre) thick green panel max creative veneer, All th evisible portion shall be finished finished with hard wood edging complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing anodized aluminium work No.14081 of Jindal/Hindalco for door and window ventilators and partitions wall frames extruded built up standard tubular and other sections of approved make conforming to IS:733 and IS:1285 anodized transparent or dyed to required shade according to IS:1868 (Minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions at top, bottom and sides with required PVC/neroprene felt etcetra Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically where ever required including cleat angle, aluminium snap beading for glazing/paneling C.P. brass/stainless steel screws all complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing anodized aluminium work of Jindal/Hindalco for door, window and ventilator shutters extruded built up standard tubular and other sections of approved make conforming to IS:733 and IS:1285 anodized transparent or dyed to required shade according to IS:1868 (Minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions at top, bottom and sides with required PVC/neoprene felt etcetra Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angl;e, aluminium snap beading for glazing/paneling C.P. brass/ stainless steel screws. all complete including carriage of material within all leads, lifts and other incidentals as per architectural drawings design, specifications and as per directions and entire satisfaction of Engineer-in-Charge including providing and fixing hinges/pivots and making provisions for fixing of fittings whereever required including the cost of PVC/neoprene gaskets as required and glazing/paneling shall be paid for separately) (filling glazed/panelling shall be paid for separately) . The rate is inclusive of Octroi, Royality, Malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 6mm (Six millimetre) thick glass panels of of modi guard/saint gobain(weight not less than 13.75 kg/ sqm. (thirteen point seven five kilogramme per square meter) for windows, ventilators shutters and partitions etcetra including necessary fitting complete complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 8mm (Eight milimetre) thick aluminium grill anodized powder coated to existing of Jindal/Hindalco in window/ventilators with 80mmx80mm (Eighty milimetre into Eighty milimetre) panels holes with 25x8mm (Twenty five into Eight milimetre) thick aluminium flat in windows and ventilators including fixing with aluminium screws or bolts and nuts complete in aluminium channels base frames (Aluminum channels base frames to be measured and paid for separately) as per approved drawing, design and specifications and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing stainless steel fly wire mesh for aluminium doors, windows and ventilators including all fittings, beading etectra complete as per approved drawing, design and specifications and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing both side prelaminated board bwp phenol bonded exterior/interior grade 12mm (Twelve millimetre) thick water proof of Action Tesa/ Century/Kitlam/Kit Ply/Green Ply ISI marked and approved shade for in fill pannel of alluminium shutters as per approved drawing, design and specifications and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing 25mm (Twenty five millimetre) thick water proof commercial board in shelves/box for cupboard with butt joints and fixing with nails, screw etcetra complete as per approved drawing, design and specifications and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing Aluminium sheet 1mm (One millimetre) thick in expansion joints vertically fixed with screws or nails complete as per approved drawing, design and specifications and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and fixing 25mm (Twenty five milimetre) thick water proof termite resistant commercial board of Centuary ply ISI mark in frame and shutter with butt joints and fixing with nails and screws etc. complete as per architect drawing, All cut portions of the shutters shall be finished with 6mm (Six milimetre) thick hard wood edging. The SDB shutter shall also be finished with P.G.I. (Plain Galvanised Iron) sheet lining from inside complete complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing hydraulic floor spring confirming to IS 6315 of Universal approved brand for door shutter including cost of cutting floor as required embedding in floors and cover plates etcetra complete as per the direction of Engineer-In-Charge including making good the floors complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimeter) anodized aluminium door stopper with rubber cushion screw etcetra to suit shutter thickness complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 300x16mm (Three hundred into sixteen millimeters) anodized aluminum sliding door bolts, make of PILOT/Sheel anodized transparent or dyed to required colour and shade with necessary bolts, nuts and screws etcetera complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 250x16mm (Two hundred into sixteen millimeters) anodized aluminum sliding door bolts, make of PILOT/Sheel anodized transparent or dyed to required colour and shade with necessary bolts, nuts and screws etcetera complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 250x10mm (Two hundred fifty into ten millimeters) anodized aluminum tower bolts (Barrel type) make of pilot/sheel anodized transparent or dyed to required colour and shade with screws etc. complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 100x10mm (One hundred into ten millimeters) anodized aluminum tower bolts (Barrel type) make of pilot/sheel anodized transparent or dyed to required colour and shade with screws etcetra complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 125mm (one hundred twenty five millimeters) aluminium handles make of pilot/sheel transparent or dyed to required colour and shade with necessary screws etcetra complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimeters) aluminium handles make of pilot/sheel transparent or dyed to required colour and shade with necessary screws etcetra complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing aluminium anodeized 150mm (One hundred fifty milimetre) bright finished hard drawn hooks and eyes as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 150mm (one hundred fifty millimeter) bright finished brass door stopper with rubber cushion screw etc to suit shutter thickness complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 65x35mm (Sixty five into Thirty five milimetres) size special quality chromium plated brass cup board lock with six leavers including necessary screws etcetera complete (Indian make) as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 12mm (twelve millimeters) thick and 150mm (one hundred fifty millimeters) wide first class Deodar wood pelmet with 25mm (twenty five millimeters) diameter wooden curtain rods and brackets including fixing 25x3mm (twenty five into three millimeters) M.S. flat 10cm (ten centimeters) long, plugs and necessary screws etcetera complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing brass curtain rail with rollers stop end and brackets in pelmets instead of wooden curtain rod 25mm (Twenty five millimetre) diametre and brackets of first class deodar wood (actual length of rail to be measured) etcetera complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying Kota stone slab 30mm (thirty milimetre) thick of size 55x55cm (fifty five into fifty five centimeters) with 7.5cm (Seven point five centimeters) wide Jaisalmer yellow band in flooring laid on 20mm (twenty milimetres) average thick base of cement mortar 1:4 (One cement : four sand) and jointing with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete upto all floor as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying Kota stone slab 30mm (thirty milimetre) thick of size 55x55cm (fifty five into fifty five centimeters) with 7.5cm (Seven point five centimeters) wide Jaisalmer yellow band in riser of steps, skirting, dado and pillars laid on 12mm (Twelve milimetre) average thick base of cement mortar 1:3 (One cement isto three sand) and jointing with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete upto all floor as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 600x600x5.5mm (Six hundred into six hundred into five point five milimetre) anti skid water proof stain and impact resistance heavy duty full body Matt finish vitrified tiles of Nitco/Restile/Simpolo/ Orient bell/Kajeria/Rak in flooring, tread of steps, landing, skirting on a bed of 12mm (Twelve milimetre) thick cement mortar 1:3 (One cement isto Three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete upto all floor level as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 600x600x5.5mm (Six hundred into six hundred into five point five milimetre) anti skid water proof stain and impact resistance heavy duty double charged/ultra charge vetrified tiles of Nitco/Restile/Simpolo/ Orient bell/Kajeria/Rak of approved shade in flooring treads of steps, landing, Skirting laid on a bed of 12mm (Twelve milimetre) thick cement mortar 1:3 (One cement isto Three sand) and laid jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete upto all floor level as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying upto all floor level, 300x300x25mm (three hundred into three hundred into twenty five millimeters) thick automatic hydraulically compressed and polished terrazzo tiles ISI marked number IS-1237 of NTC in 50% (fifty percent) white and 50% (fifty percent) grey cement with the ratio of chips shall be 55% (fifty five percent) white chips, 15% (fifteen percent) each maroon, yellow and dark green having chips sizes 0, B, 2 B laid in floor, treads of steps and landing on a bed of 25mm (twenty five millimetre) average thickness of cement mortar 1:6 (one cement isto six sand) and jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) including rubbing and polising complete with medium shade tiles upto all floor level as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying spartic ceramic tiles of size 300x450mm (Three hundred into four hundred fifty millimetre) of approved brand of Restile/Kajaria/ Nitco/Simpolo /Somany /Johnson/Orient & Bell/Rak / AGL manufactured in flooring, treads of steps etcetra laid on a bed of 12mm (twelve millimeters) thick cement mortar 1:3 (one cement is to three sand) and jointed with white cement slurry complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying 6mm (Six millimetre) thick spartic ceramic tiles of size 300x450mm (Three hundred into four hundred fifty millimetre) of approved brand of Restile/Kajaria/ Nitco/Simpolo /Somany /Johnson/Orient & Bell/Rak / AGL manufactured in skirting, cladding, dado in for all heights, laid on a bed of 12mm (twelve millimeters) thick cement mortar 1:3 (one cement is to three sand) and jointed with white cement slurry complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 12mm (Twelve millimeter) thick unistone cladding on R.C.C surface side as on faces of Arch masonry walls etcetra on 12mm (Twelve millimeter) thick cement plaster 1:3 (one cement isto three sand) and jointed with cement slurry including scaffolding etcetra complete upto all floor level as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying 19mm (Nineteen millimetre) thick granite stone in flooring laid over 20mm (Twenty millimetre) average thick base of cement mortar 1:3 (One cement isto three sand) and jointed with grey cement slurry mixed with pigment to match the shade of the granite stone including rubbing and polising and jointed with RCC slab finished including rubbing, polishing, bloshing etcetra complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying 300x300x25mm (Twenty five millimetre) labrador design rainbow series tile flooring of NTC laid on a bed of 12mm thick cement mortar 1:3 (one cement isto three sand) and jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) aas per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying heavy duty precast cement concrete inter locking paver block 60mm (Sixty millimetre) thick with vibration technology in NTC/PVC/Fibre moulds upto M-50 (M-Fifty) grade including border or kurb block grey or coloured over sub base of concrete with 25mm (Twenty five millimeter) (average thickness) of cement mortar 1:4 (One cement isto four sand) laid over and jointed with pigment to match the shade of block and curing rubbing and polishing complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying 40mm (Forty millimetre) thick cement concrete flooring 1:2:4 (one cement is to two sand is to four graded crushed stone aggregate 20mm (twenty millimeters) nominal size) laid in one layer finished with a floating coat of neat cement and curing complete up to all floor level as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

15mm (fifteen millimeters) thick cement plaster skirting or dado up to all heights with cement mortar 1:3 (one cement is to three sand) finished with floating coat of neat cement including rounding of junctions with floors and curing complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing prepainted (ISI marked -Z 120) of tata /sail/ Reliance/zindal steel sheet roofing over all steel trusses providing and fixing Kolar metal or EQUIV prepainted single skin trapazodial profile sheething 0.60mm (Zero point sixty millimetre) thick having (1060 mm coverwith overall width 1126 mm) 28 mm crost depth at 353 I 2 c/c crost distance there will be two ribs at the centre or stiffning having depth of 25mm (Twenty five millimeter) at the lower 81mm (Eighty one millimeter) base metal of cold rolled steel coil with zink coating top coat with regular modified polyster coating of 20 (Twenty) micron over 5 (Five) micron primer coating to back coat of palyster of 5 (Five) micron over 5 (Five) micron primer approved shade and Balancing reverse coat with polyster paint fixing of sheet shall be with self drilling and selp tapping screws, of size 5.5mm (Five point five millimeter) diameter 75.5mm (Seventy five point five millimter) length with EDPM seal. The material supply will be accompained by test certificate and against corrosion/ Fading of colour and manufacturing defects as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing prepainted (ISI marked -Z 120) of tata /sail/Reliance/ zindal steel sheet ridges or hips 60cm (Sixty centimetre) overall Kolar metal 0.60mm (Zero point sixty millimetre) thick kolar metal or EQUIV prepainted single skin to metal of cold rolled steel coil with zink coating top coat with regular modified polyster coating of 20 (Twenty) micron over 5 (Five) micron primer coating to back coat of palyster of 5 (Five) micron over 5 (Five) micron primer approved shade and Balancing reverse coat with polyster paint fixing of sheet shall be with self drilling and self tapping screws, of size 5.5mm (Five point five millimeter) diameter 75.5mm (Seventy five point five millimter) length with EDPM seal .The material supply will be accompained by test certificate and against corrosion/ Fading of colour and manufacturing defects as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing Valley 60cm (sixty centimetre) overall with 0.60mm (zero point six zero milimetre) thick ISI marked Z-120 (Z-one hundred twenty) prepainted steel sheet in roofing with hot dipped, metallic zinc coated steel sheet with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted galvanized iron J or L hooks, bolts and nuts 6mm (six milimetres) diameter with prepainted galvanized iron limpet and bitumen washers filled with required shade of colour and laid complete within all accessories as required upto any height as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 300mm (Three hundred millimtre) wide 450mm (Two hundred fifty millimtre) over all with 0.63mm (Zero point sixty three millimetre) thick plain G.I. tata /sail /Reliance/ zindal sheet gutter with iron brackets 40x3mm(Forty into three millimetre) size bolts and nuts and washers etcetra including making necessary conections with rain water pipe complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing flushing 38cm (thirty eight centimtre) over all with Kolar metal 0.60mm (Zero point sixty millimetre) thick kolar metal or EQUIV prepainted single skin to metal of cold rolled steel coil with zink coating top coat with regular modified polyster coating of 20 (Twenty) micron over 5 (Five) micron primer coating to back coat of palyster of 5 (Five) micron over 5 (Five) micron primer approved shade and Balancing reverse coat with polyster paint fixing of sheet shall be with prepainted iron J of L hooks, bolts and nuts 6mm (six millimtre) diametre and prepainted GI limpet and bitumen washers complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing M.S. black plain sheet 1.66mm to 2.00mm (one point sixty six millimeter to two point zero zero millimeters) thick in facia/eaves boards/soffits /ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Steel work of TATA/SAIL/TISCO welded in built up sections trusses and framed work, in trusses and trussed purlins, main and cross beams, hip, jack rafter, frames of ceiling/false ceiling, flats with connected plates with comman rafters and the like including cutting, lifting, hoisting and placing in position complete and applying a priming coat of red lead paint complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm (Twent into ten into two millimetre) and braced with flat iron diagonals 20 x5 mm (Twenty into five millimetre) size with top and bottom rails of T-iron 40x40x6 mm (Forty into forty into six millimetre) with 38 mm (Thirty eight millimetre) diametre steel pulley complete with bolts and nuts locking arrangements, stoppers,handles,including applying a priming coat of red lead paint as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 150 mm (one hundre fifty millimetre) diametre ISI marked P.V.C. (Poly venyl chloride) (D-plast ) Finolex / Relpipe (reliance)/ vectus provision for purpose rain water disposal on walls face Rain water pipes working pressure not less than 4.60kg/sq cm (four point six zero kilogram per square centimetre) for rain water pipes fixed with approved adhesive including filling the joints complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing on wall face 150mm (One Hundred fifty millimetre) diametre ISI marked P.V.C (Poly venyl chloride) (D-plast) Plain bend of Finolex / Relpipe (reliance)/ vectus manufactured for purpose of rain water disposal accessories for Rain water pipes with approved adhesive i/c filling the joints complete complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 150mm (One hundred fifty millimetre) dia. ISI marked PVC (Poly venyl chloride) clamps of Finolex / Relpipe (reliance)/ vectus manufactured of approved design with steel screws and rawal plugs etcetra complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Applying priming coat (two or more coats) over new steel and other metal surfaces with ready mixed priming paint brushing red lead, red oxide/zinc oxide chrome of approved brand and manufacture (Narolac /Asian paints) after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes/fine steel wool scrapers and sand papered complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Painting two or more coats (excluding priming coat) on new steel and other metal surfaces with enamel paint of approved brand and manufacture of Narolac/Asian paints other than white and of approved shade brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning, oil, grease, dirt and sand papering and knotting with ready mixed paint brushing wood primer pink of approved brand and manufacture of Narolac/Asian paints complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Painting two or more coats (excluding priming coat) on new wood and wood based surfaces with enamel paint other than white of approved brand and manufacture of Narolac/Asian and of approved shade to give an even shade including cleaning the surface of all dirt, dust and other foreign matter complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Polishing two or more coats with french polish on new wood and wood based surfaces of approved shade to give an even shade including , cleaning the surface of all dirt, dust and other foreign matter, sand pappering to smooth the surface to give final matter finish complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Applying one coat of Acrylic primer (Spectrum or equivalent of Superior quality) on new concrete/masonry/plastred surfaces after and including preparing the surface by thoroughly brushing the surface free from mortar droppings and other foreign matters, sand papering the surface smooth complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Wall painting (Two coat) with Acrylic washable emulsion Sepctrum quartz king or equivalent finish for interior painting with brushes plain smooth finish composed of acrylic polymere in emulsion inorganic/ special pigment sillceous aggregate anti fungicides, anti-rusting and foaming in two coats including necessary putty to give smooth even surface, sand papered smooth complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and applying Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture of Nerolac/Asian of required shade on un-decorated wall surfaces to give an even shade over and including a priming coat with distemper, primer of approved brand and manufacture of Nerolac/Asian after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth upto all floor level as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Finishing wall with weather proof exterior emulsion paint of Asian paint or Nerolac Suraksha of approved brand and manufacture and of required shade on undecorated wall surfaces (two or more coats) to give an even after throughly brushing the surface to remove all dirt and remains of loose powdered material incluing applying of putty as required for making the surface complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including entire carriage of material within all leads, lifts and other incidentals as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

6mm (six millimeter) thick cement plaster to ceiling with cement mortar 1:3 (one cement isto three sand), up to all floor level complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and applying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:6 (one cement isto six sand) in single coat on rough side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and applying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:6 (one cement isto six sand) in single coat on fair side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and applying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:4 (one cement isto four sand) in single coat on rough side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and applying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:3 (one cement isto three sand) in single coat on rough side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and applying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:3 (one cement isto three sand) in single coat on fair side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and applying 8x12mm (Eight into twelve millimetre) groove in plaster of 20cm (Twenty centimetre) interval as elevation in cement mortar 1:4 (One cement isto four sand) up to all floor level and finished even and smooth complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and applying 15mm (Fifteenmillimetre) thick plain cement mortar bands in cement mortar 1:4 (One cement isto four sand) up upto 300mm (Three hundred millimetre) in width Raised band up to all floor level complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and applying 20mm (Twenty millimetre) thick plain cement mortar bands in cement mortar 1:4 (One cement isto four sand) up upto 300mm (Three hundred millimetre) in width Raised band up to all floor level complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Applying two or more coats of Birla White wall care putty over plastered surfaces after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final finish to the surface complete upto all floor level as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing water proofing treatment in depressed slab shall be done with Dr. Fixit felt shall be in two coats apply First coat of Dr. Fixit Flex to the clean and saturated surface maintaining a coverage 6.00 sft (0.60 Sqm) (zero point six zero squate meter) per Kg to achieve 1mm (one millimeter) thickness this coating shall also be executed up to 300mm vertically. The 2nd coat shall be applied in opposite direction after 4 to 6 (Four to six) hours of application of 1st coat then sprinkle sand on top surface of applied Dr. Fixit Fast flex white still tacky and the second coat. Then apply cement mortar 1:4 (one cement ist four sand) and mixed with Pidiproof LW at the rate 200ml (two hundred millimetre) per 50 (Fifty kilogram) of cement over the floor with suitable gradient towords drain water pipe while the second coat of Dr. Fixit is still tacky complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing doctor fixit expension joint sealent as per manufacturer's procedure and specification and as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying damp proof course 38mm (Thirty eight millimeters) thick with cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty millimeters) nominal size) and curing complete including cost of form work and as required at site complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Applying a coat of hot bitumen mexphalt 80/100 (eighty/hundred) or equivalent using 1.70 Kgs. (one decimal seven zero kilogramme) per square meter on damp proof course after cleaning the surface with a piece of cloth lightly soaked in kerosene oil complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Supplying and fixing 4mm (Four milimetre) thick Frosted glass panes of modiguard with putty and nails completeas per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing to existing door frames 30mm (thirty millimeter) thick factory made RAJ SHR (Code No. 9.120) (Nine decimal one two zero) or its equivalent PVC paneled door shutters consisting of frame made out of ms tubes of 19 gauge (nineteen gauge) thickness and size 19x19mm (nineteen millimeter into nineteen millimter) for styles and 15mm×15mm (fifteen millimeter into fifteen millimeter) for top and bottom rails, ms frame shall have a coat of steel primer of approved make and manufacture MS frame covered with 5mm thick heat moulded PVC “C” channel of size 30mm (thirty millimeter) thickness 70mm (seventy millimeter) width out of which 50mm (fifty millimeter) shall be flat and 20mm (twenty millimeter) shall be tapered in 45 degree angle of either side forming style and 5mm thick, 95mm wide, PVC sheet out of which 75mm (seventy five millimeter) shall be flat and 20mm (twenty millimeter) shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 wide PVC sheet out of which 75mm (seventy five millimeter) shall be flat and 20mm (twenty millimeter) shall be tapered on both sides to form lock rail, top, bottom and lock rail shall be provided either side of the panel 10mm thick, 20mm (twenty millimeter) wide cross PVC sheet be provided as gap insert for top rail and bottom rail paneling of 5mm thick both sides PVC sheet to be fitted in the MS frame welded / sealed to the style and rails, joints mitered and jointed with solvent cement adhesive including fixing of PVC shutter with existing frame with MS butt hinges 100x50x1.90mm (one hundred into fifty into one decimal nine zero millimetre) size with necessary screws etcetra complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 85cm (Eighty five centimetre) railing composed of 19x19mm(nineteen into nineteen millimeter) and 12x12mm (Twelve into twelve millimetre) MS solid square bar and fixing the balusters at required spacing including welding together with M.S. flat 40x5mm (forty into five millimeter) size with stainless hollow pipe hand rail baluster dully welded/ jointed with electic gas welding with top MS flat as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing SST hand railing for ramp for Divyang with 50mm(Fifty millimetre) dia SST pipe handrail slip resistant with round ends at two level at 75cm (Seventy five centimetre) and 90cm (Ninety centimetre) height and extended 30cm (Thirty centimetre) beyond the top and bottom of railing with 25mm(Twenty five millimetre) dia MS pipe baluster welded to 50mm (Fifty millietre) dia mild steel pipe embedded in cement concrete at 600mm centre to centre duly welded with mild steel flat 50x5mm (Fifty into five millimetre) including and applying a coat of red lead paint complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing grab Bar two numbers each chromium plated 40mm (forty millimeter) dia steel pipes at 78cm (seventy eight centimeter) height with MS plates as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing Everest design fibre board ceiling tiles of size 600mmx600mm (six hundred millimeter into six hundred millimeter) and 6mm (Six millimeter) thick over ready made power coated metal sheet section frame work 600mm (six hundred millimeter) centre to centre the grid supported with ceiling complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing Acoustical panels wall of 600x1200x25mm (Six hundred into One thousand two hundred into Twenty five millimetre) thick of Daxune Acoustical/ Himalayan acoustical panels fixed with steel screws etcetra as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing cupboard/cabin with 19mm (Nineteen milimetre) thick water proof commercial board of Centuary/Kit ply/ Alpro ply/Marina (ISI Marked) for box and shutters and back side of the cupboard shall be 8mm thick ply and all cut portion of shutters shall have 6mm/12mm thick hard wood edging. The shutters from outside shall be finished with 1mm thick lamination of Centuary/Green ply/ Action Tesa of approved shade including fixing of PTMT handles 125mm (One hundred twenty five millimeter) shall be provided in wood colour with nickle plated piono hinges with screws etcetra complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing under layer for plinth protection of 75mm(Seventy five millimeters) thick (unconsolidated) bed of dry brick/stone aggregate 40mm(Forty millimeters) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing plinth protection 60mm (Sixty millimetre) thick interlocking paver block with 23cm (Twenty three centimetre) dia half round stone ware pipe for drainage purpose fixed over cement concrete 1:4:8 (One cement isto four sand isto eight graded crushed stone aggregate 40mm (Forty millimetre) nominal size) complete (box concrete to be paid seperatly) as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millimetre) diametre sand cast iron/cast iron spun fitting and socket soil, waste and ventilating pipes (Lead caulked joint to be measured and paid separately) as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millimetre) diametre sand cast iron/cast iron cowl as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millimetre) diametre sand cast iron/cast iron spun fitting and accessories plain single equal branch of required degee as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing water pump 1.00 HP (One horse power) complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing vitreous china wash down water closet squatting pan (Indian type WC pan) Orissa pattern W.C. Pan Cat No.20090 (S-10) (Twenty thousand ninety) of size 53x41cm (Fifty three into forty one centimetre) with white shade of Hindware/Jaquar/Cera/ Star white/Snow white shade (earth work, bed concrete, foot rest and trap to be measured and paid for separately) as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixng Vitreous china wash down water closet European type W.C. Pan Star.No.20087 (Twenty thousand eighty seven) (S-10) (S-Ten) of size 57x35x39cm (Fifty seven into thirty five into thirty nine centimetre) with pre cistern and fixed with jet pressure complete of Hindware/Jaquar/Cera /Star white/Snow white shade with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (One Cement isto One Sand) (Earth work and bed concrete to be measured and paid for separately) as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten milimetre) size P.V.C (Poly venyl chloride) Supreme/Finolex / Relpipe (reliance)/ vectust confirming to IS-14735-99 'P' or 'S' trap for water closet (squatting pan) including jointing the trap with pan and soil pipe in cement mortar 1:1 (One cement isto OneSand) as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 10.00 Ltrs (Ten ltres) capacity P.V.C. (Poly Venyl Chloride) low level flushing cistern I.S. (Indian Standard) marked No. 2603 of Hindware /Cera/ Jaquar star white with a pair of M.S. (mild steel) brackets, with fittings such as lead valve less siphon, 15mm (Fifteen milimetre) nominal size brass ball valve with polythene float, C.P. (Chromium Plated) brass handle unions and couplings for connections with inlet, outlet and overflow pipes, 40mm dia (Forty milimetre) diameter C.P. (Chromium Plated) flush bend including cutting holes in walls and making good the same and connection the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing plastic seat (solid type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers Solid type white plastic seat and cover as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing vitreous china wash basin Cera / Hindware or equivalent 630mmx450mm ( Six hundred thirty milimetre into four hundred fifty milimetre) of white shade No-10008 (Ten thousand eight) with single hole for pillar tap with C.I. (Cast iron) or Mild Steel brackets painted white including cutting holes and making good the same with pedestal but excluding fittings as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing vitreous china pedestal I.S. ( Indian Standard) marked No.11018 (Eleven thousand eighteen) of Hindware/Cera/Jaquar for wash basin complete recessed at the back for the resption of pipe and fittings as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimeters) nominal diameters CP brass waste pipe of continental series of Jaquar/Classic series of Hindware/Floral series of Cera for wash basin or sink complete including brass check nut complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimeters) nominal diameters P.V.C (Poly venyl chloride) waste pipe for wash basin or sink complete including brass check nut complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 600x450mm (Six hundred into four hundred fifty millimeters) bevelled edge mirror of superior glass mounted on 6mm (Six millimeters) thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 600x20mm (Six hundred into twenty millimetre) C.P. (chromium plated) brass towel rail manufacture continental series of Jaquar/Classic series of Hindware/Floral series of Cera complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 600x120mm (Six hundred into one hundred twenty millimetre) glass shelf with C.P brass bracket and guard rail manufacture continental series of Jaquar/Classic series of Hindware/Floral series of Cera complete fixed to wooden plugs with C.P brass screws as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing CP (Chromium plated) Container for liquid soap with C.P. brass lid and bracket manufacture continental series of Jaquar/Classic series of Hindware/Floral series of Cera complete fixed to wooden plugs with C.P brass screws as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing vitreous china flat back type lipped front urinal basin of Hindware /Cera/ Jaquar star white size 430x260x350mm (Four hundred thirty into two hundred sixty into three hundred fifty) and 340x430x265 (Three hundred forty into four hundred thirty into two hundred sixty five) with automatic flushing cistern with fitting MS or CI brackets, standard size galvanized steel flush pipes and spreader galvanized steel flush pipe and spreader with brass union and GI clamp complete including painting of cistern and fitting, cutting, making good the wall, floors where required and urinal basin with 5 ltr (Five letre) automatic flushing cistern complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing Large flat back type of Cera/ Hindware/Jaquar of Star white/Snow white shade of size 390mm x 375mmx590mm (Three hundred ninety into Three hundred seventy five into Five hundred ninety milimetre) vitreous china urinal No.60002 (Sixty thousand two) including connection the urinal with waste pipe by means of white lead mixed with chopped hemp (waste pipe to be measured and paid for separately) auto cistern urinals complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing vitreous china Division plate pattern for urinal of size 840x100mm (Eight hundred forty into One hundred milimetre) with integral longtitudinal flush pipe as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 15mm dia (Fifteen milimetre) diametres C.P. (Chromium Plated) Brass Bib tap No. 12 (Twelve) with long body manufacture of Continetal series of Jaquar/Classic series of Hindware/ Floral series of Cera as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 15mm dia (Fifteen milimetre) diametres C.P. (Chromium Plated) Brass pillar tap swan neck of Continetal series of Jaquar/Classic series of Hindware/ Floral series of Cera, as per approved specification, drawings, design and as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 15mm dia (Fifteen milimetre) diametres C.P. (Chromium Plated) Brass pillar tap with capstan head of Continetal series of Jaquar/Classic series of Hindware/ Floral series of Cera, as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen milimetre) diametresC.P. (Chromium Plated) stop cock No.12 with capastan head of Continetal series of Jaquar/Classic series of Hindware/ Floral series of Cera, as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 20mm (Twenty milimetre) diametresC.P. (Chromium Plated) stop cock No.12 with capastan head of Continetal series of Jaquar/Classic series of Hindware/ Floral series of Cera, as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing ISI marked 45cm (forty five centimeters) long and 15mm (fifteen millimeters) nominal bore PVC connection pipe with brass unions complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen milimetre) nominal bore C.P. (Chromium Plated) brass full way valve with wheel Continetal series of Jaquar/Classic series of Hindware/ Floral series of Cera as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 20mm (Twenty milimetre) nominal bore C.P. (Chromium Plated) brass full way valve with wheel Continetal series of Jaquar/Classic series of Hindware/ Floral series of Cera as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing brass ball valve (horizontal plunger type) high pressure with polythene plastic flats 15mm (Fifteen millimtre) nominal bore, as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 20mm (Twenty milimetre) nominal bore ferrule including boring and taping the main as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 75mm (Seventy five millimetre) diameter PVC (Polyvinyl chloride) door bend with oval access door with insertion rubber washer, 3mm (Three millimtre) bolts and nuts ISI marked make of Supreme/Finolex / Relpipe (reliance)/ vectus including testing of pipes and joints complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten millimetre) diameter PVC (Polyvinyl chloride) door bend with oval access door with insertion rubber washer, 3mm (Three millimtre) bolts and nuts ISI marked make of Supreme/Finolex / Relpipe (reliance)/ vectus including testing of pipes and joints complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 150mm (One hundred fifty millimetre) diameter PVC (Polyvinyl chloride) door bend with oval access door with insertion rubber washer, 3mm (Three millimtre) bolts and nuts ISI marked make of Supreme/Finolex / Relpipe (reliance)/ vectus including testing of pipes and joints complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 75mm (Seventy five millimeter) diameters. P.V.C (Polyvinyl chloride) single equal branch with oval access door, insertion rubber washer, 3mm (Three millimtre) bolts and nuts of Supreme/Finolex / Relpipe (reliance)/ vectus or its equivalent medium class confirming to IS-14735-99 as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten millimeter) diameters. P.V.C (Polyvinyl chloride) single equal branch with oval access door, insertion rubber washer, 3mm (Three millimtre) bolts and nuts of Supreme/Finolex / Relpipe (reliance)/ vectus or its equivalent medium class confirming to IS-14735-99 as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten millimetre) diametre P.V.C (Polyvinyl chloride) plain double equal branch with oval access door, ISI marked confirming to IS-14735-99 medium class make of Supreme/finolex / Relpipe (reliance) / vectus with insertion rubber washer, 3mm (Three millimetre) thick bolts complete including fixing with approved adhesive etcetra complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing P.V.C. (Polyvinyl chloride) (D-Plast) fittings and accessories : P.V.C. collars 75mm (Seventy five millimetre) diametre ISI marked make of Supreme/finolex / vectus complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing P.V.C. (Polyvinyl chloride) (D-Plast) fittings and accessories : P.V.C. collars 110mm (One hundred ten millimetre) diametre ISI marked make of Supreme/finolex / vectus complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing P.V.C. (Polyvinyl chloride) (D-Plast) fittings and accessories : P.V.C. collars 150mm (One hundred fifty millimetre) diametre ISI marked make of Supreme/finolex / vectus complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 75mm (Seventy five millimeter) diameters P.V.C (Polyvinyl chloride) plain bend of Supreme/finolex confirming to IS-14735-99 including fixing with approved adhesive complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten millimeter) diameters P.V.C (Polyvinyl chloride) plain bend of Supreme/finolex confirming to IS-14735-99 including fixing with approved adhesive complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 150mm (One hundred fifty millimeter) diameters P.V.C (Polyvinyl chloride) plain bend of Supreme/finolex confirming to IS-14735-99 including fixing with approved adhesive complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Cutting holes upto 15x15cm (Fifteen into Fifteen centimetre) in R.C.C floors and roofs for passing drain pipe etcetra and repairing the holes after insertion of drain pipe etc. with cement concrete 1:2:4 (One cement isto two sand isto four graded stone aggregate 20mm(Twenty millimetre) nominal size) including finishing complete so as to make it leak proof complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Constructing manhole with RCC (reinforced cementconcrete) top slab in 1:2:4 mix (One Cement: Two Sand: Four graded crushed stone aggregate 20mm (Twenty milimetre) nominal size), foundation concrete 1:4:8 (One Cement: Four Sand: eight graded crushed stone aggregate 40mm (Forty milimetre) nominal size, inside plastering 15mm (Fifteen milimetre) thick with cement mortar 1:3 (One Cement: Three Sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix ((One Cement: Two Sand: Four graded crushed stone aggregate 20mm (Twenty milimetre) nominal size) finished smooth complete including curing and testing Inside size 800mmx800mm (Eight hundred milimetre into Eight hundred milimetre) and 500mm (Five hundred milimetre) deep including C.I. (Cast Iron) cover with frame, (Light duty single seal pattern –I) 455mmx610mm (Four hundred fifty five into Six hundred ten milimetre) internal dimensions total weight of cover and frame to be not less than 38 kg (Thirty eight kilogram) (weight of cover 23kg (Twenty three kilogram) and weight of frame 15kg (Ffteen kilogram) with 200mm (Two hundred milimetre) thick walls of brick using comman burnt clay building bricks in cement mortar 1:3 (One Cement: Three Sand) as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Constructing manhole with RCC (reinforced cement concrete) top slab in 1:2:4 mix (One Cement: Two Sand: Four graded crushed stone aggregate 20mm (Twenty milimetre) nominal size, foundation concrete 1:4:8 (One Cement: Four Sand: eight graded crushed stone aggregate 40mm (Forty milimetre) nominal size, inside plastering 15mm (Fifteen milimetre) thick with cement mortar 1:3 (One Cement: Three Sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix ((One Cement: Two Sand: Four graded crushed stone aggregate 20mm (Twenty milimetre) nominal size finished smooth complete including curing and testing Inside size 800mmx800mm (Eight hundred milimetre into Eight hundred milimetre) and 1000mm (One thousand milimetre) deep including C.I. (Cast Iron) cover with frame, (Medium duty) 500mm (Five hundred milimetre) internal diametre total weight of cover and frame to be not less than 116 kg (One hundred sixteen kilogram) (weight of cover 58kg (Fifty eight kilogram) and weight of frame 58kg (Fifty eight kilogram) with with 200mm (Two hundred milimetre) thick walls of brick using comman burnt clay building bricks in cement mortar 1:3 (One Cement: Three Sand), as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and lying in trenches ISI marked 25mm (Twenty five millimetre) nominal bore galvanized mild steel tubes (Medium grade) tube fittings of approved brand and manufacture (TATA/ JINDAL MAKE) complete (earth work in trenches to be measured and paid for separately) as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and lying in trenches ISI marked 25mm (Twenty five millimetre) nominal bore galvanized mild steel tubes (Medium grade) tube fittings of approved brand and manufacture (TATA/ JINDAL MAKE) complete (earth work in trenches to be measured and paid for separately) as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 16mm (Sixteen milimetres) nominal bore/diametres 1216 (One thousand two hundred sixteen) polythene aluminium polythene (P.E A.L.P.E.) composite pressure pipe U.V. stabilized with carbon plastic confirming to IS 1545-2004 (Fifteen thousand four hundred fifty - Two thousand four) of kitec for water supply including clamps at one metres spacing cutting fixing and making good the walls etcetera, but excluding the cost of fittings (internal work) pipes exposed on wall, including filling the joints with approved adhesive complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 20mm (Twenty milimetres) nominal bore/diametres 1620 (One thousand six hundred twenty) polythene aluminium polythene (P.E A.L.P.E.) composite pressure pipe U.V. stabilized with carbon plastic confirming to IS 15450-2004 (Fifteen thousand four hundred fifty - Two thousand four) of kitce for water supply including clamps at one metres spacing cutting fixing and making good the walls etcetera, but excluding the cost of fittings (internal work) pipes exposed on wall, including filling the joints with approved adhesive complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 75mm (Seventy five millimetre) diametre high pressure P.V.C. (Poly vinyl chloride) spigot and socket soil, waste and ventilating pipes ISI marked confirming to IS-14735-99 medium class make of Supreme/finolex / vectus including fixing with approved adhesive etcetra complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten millimetre) diametre high pressure P.V.C. (Poly vinyl chloride) spigot and socket soil, waste and ventilating pipes ISI marked confirming to IS-14735-99 medium class make of Supreme/finolex including fixing with approved adhesive etcetra complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 150mm (One hundred fifty millimetre) diametre high pressure P.V.C. (Poly vinyl chloride) spigot and socket soil, waste and ventilating pipes ISI marked confirming to IS-14735-99 medium class make of Supreme/finolex including fixing with approved adhesive etcetra complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten millimetre) dia. ISI marked PVC (Poly venyl chloride) clamps of Finolex / Relpipe (reliance)/ vectus manufactured of approved design with steel screws and rawal plugs etcetra complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 75mm (Seventy five millimetre) dia. ISI marked PVC (Poly venyl chloride) clamps of Finolex manufactured of approved design with steel screws and rawal plugs etcetra complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing PVC (Polyvinyl chloride) floor trap of Supreme/Finolex self cleaning design including fixing with approved adhesive, cost of cutting making good the wall complete 110X90 mm ( one hundred ten into Ninety millimeter) as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and placing three layered PVC (Poly Venyl Chloride) water storage tank ISI marked 12701 Sintex or its equivalent make and of having capacity 1000 ltr. (One thousand liters) tank complete in all respects, with necessary fittings including over flow pipe ball valve, scour pipe, with polythene float valve, PVC cover with locking arrangement including proving pads of sizes as required for inlet and outlet complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing ISI marked, 100mm (One hundred millimeters) dia. C.P grating manufacture continental series of Jaquar/Classic series of Hindware/Floral series of Cera for gully, floor or Nahni trap complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing C.P. (Chromium Plated) brass Jet spray of approved quality of Jaquar/Classic or Contessa Plus and colour/approved shade with one metre tube as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing chromium plated brass toilet paper holder of approved brand and manufacture continental series of Jaquar/Classic series of Hindware/Floral series of Cera complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing cast iron cover (light duty) single seal 455x610mm (Four hundred fifty five into six hundred ten millimetre) internal dimension the total weight of frame and cover to be not less than 38 kgs. (Thirty eight kilogrammes) (weight of frame 15 kgs. (Fifteen kilogrammes) and weight of cover 23 kgs. (Twenty three kilogramme) as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Supplying cast iron cover (light duty) single seal 455x610mm (Four hundred fifty five into six hundred ten millimetre) internal dimension the total weight of frame and cover to be not less than 38 kgs. (Thirty eight kilogrammes) (weight of frame 15 kgs. (Fifteen kilogrammes) and weight of cover 23 kgs. (Twenty three kilogramme) as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Kumar Associates