Repair to certain Bldg works at CG Complex, Doraha and Phillaur under AGE B/R, GE Ludhiana

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

Dismantling floor, hearth or wall tiles including cement mortar bedding(but not backing) and removing serviceable tiles to stores and rubbish off the premises complete all as specified and directed.

M&L 50 mm thick PCC 1:3:6 mix type C2 as in plinth protection and paving finishing surface even and smooth without using extra cement complete all as specified and directed.

M&L 25mm thick cement concrete type B-0, 1:2:4 (12.5mm graded crushed stone aggregate) as in floors finished even & smooth complete all as specified and directed.

M&L Non skid cerermic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile 0.11 Sqm but n.exc 0.18 Sqm in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

All as per item No 05 above but as in skirting over and including rendering 10 mm thick in cement mortar 1:4 complete all as specified and directed.

M&L Vitrified ceramic tiles 10mm thick square/rectangular polished area of each tile exceeding 0.42 Sqm but not exc. 1 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per item No 07 above but as in skirting over and including 10 mm thick in cement mortar 1:4 complete all as specified and directed.

M&L 50 mm thick PCC 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in sub base of floor complete all as specified and directed.

M&L 60mm thick interlocking coloured paver block with grey cement and no pigment of any size and shape confirming to IS 15658-2006, M-35 Grade as approved laid in flooring and joints filled/broomed with fine sand complete all as specified and directed.

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L chequerred cement concrete tiles 30cmx30 cm x25 mm thick set, jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20 mm thick laid on screed bed 15 mm thick in CM (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of slab including cutting, rubbing and polishing complete all as specified and directed.

All as per item No 13 above but in one piece as in riser ,treads of stair,skirting/ dado laid over and including 10mm thick cement screed bed in CM 1:4 complete all as specified and directed.

M&L 40mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate) as in flooring, finished even and smooth with using extra cement complete all as specified and directed.

S&F 38mm width of strip glass dividing strips, 3mm thick and inserted in position to confirm to design complete all as specified and directed.

M&L Endura ceramic tiles (Ist quailty) of size 300mmx300mmx10mm thick laid in floors etc., set and jointed in neat cement slurry and pointed in grey or coloured cement and mixed with pigment to match the shade of tile laid over and including 15mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste as per site requirement complete all as specified and directed.

M&L providing plain cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed.

M&L 16-20mm Granite (of any type) work (table rubbed and polished) in steps, jambs,pillars,window-cills, cooking platforms and like over and including 10mm thick rendering in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Taking down chowkats or frames exc 1.5 Sqm but n.exc 4.0 Sqm with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkats or frames n.exc. 1.5 Sqm (without taking off shutters from the frame) complete all as specified and directed.

Taking down Shutters of any description area exc 1 sqm but n.exc. 2 sqm Each complete all as specified and directed.

Taking down Shutters of any description area exc 1 sqm but n.exc. 2 sqm Each and refixing in the same opening and easing of shutter complete all as specified and directed.

Taking down Shutters of any description area exc. 2 sqm each and refixing in the same opening and easing of shutter complete all as specified and directed.

S&F pressed steel frames size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete all as specified and directed. Sheet thickness 1.25m.

S&F pressed steel frames size 125 X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete all as specified and directed. Sheet thickness 1.25m.

M&L providing cement concrete type C-0 1:3:6 (12.5 mm graded crushed stone aggregate) as for hold fast/ pressed steel chowkhats complete all as specified and directed.

S&F 2nd class hardwood 35mm thick plain, framed, panelled shutters (any number of panels) with panels of 9mm thick BWP commercial ply complete all as specified and directed. Type of wood as approved.

S&F 30mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35mm thick 2nd class hard wood Glazed and skelton door shutters, open rebated and prepare to receive glass, gauge etc. size of members of shutters as specifed in SSR part I complete all as specified and directed. Type of wood as approved.

S&F Door helical spring mild steel 300mm, ordinary rat tail rod pattern including roller and roller plate complete all as specified and directed.

M&L two coats of synthetic enamel painting on wooden surfaces over a coat of pink primer including preparation of newly untreated surfaces complete all as specified and directed.

S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 250mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

S&F butt hinges, 100mm medium weight, cold rolled mild steel complete all as specified and directed.

S&F 125mm aluminium handles, cast type, anodised complete all as specified and directed.

S&F floor door stopper of aluminium of 140 mm alloy body and tongue, anodised, with hard drawn steel spring fixed in floor etc complete all as specified and directed.

S&F Anodised aluminium powder coated frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F Anodised aluminium powder coated door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing,including necessary aluminium fittings etc. complete all as specified and directed.

S&F Anodised aluminium powder coated window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, including necessary aluminium fittings complete all as specified and directed.

S&F in Aluminium (Die cast body) door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg complete all as specified and directed.

S&F Sheet glass, ordinary quality, 5.5 mm thick in squares exc 0.5 sqm each pane complete all as specified and directed.

S&F Sheet glass, ordinary quality, 5.5 mm thick in squares nexc 0.5 sqm each pane complete all as specified and directed.

S&Fgalvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks or Galvanised wire staples complete all as specified and directed.

All as per srl item No. 45 above but for steel windows, wooden shutters & aluminium windows including taking out old/rusted wire cloth from wooden shutters or steel /aluminium windows either cutting or taking out galvanised wire staples and provisioning/securing the wire cloth to shutters or windows as per existing specification complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawing complete all as specified and directed.

S&F factory made soilid panel PVC Door shutter 30mm thick (Style) consisting of frame made out MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail, & bottom rail; Panneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing complete all as specified and directed.

M&L for Box type steel window/ventilator 1.25 mm thick made of ERW tube P-section of size 60 mm x 25 mm single rebated outer frame, comprises glazed skelton of ERW tube P-Section size 50mm x 20mm with one/two Nos open able leaf consisting of two Nos Sash bar of T-section 20x3 mm welded to frame with one or no vertical mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass incuding fittings and fixtures like handle, Tower bolt, stopper, Cleat, Pintal Hinges, holdfasts etc complete including cutting holes, making good dismantled portion in PCC 1:2:4 type B-1, all as specified and directed. (a) Holdfast 150mm long of 12mm x 3mm MS flat-04 Nos per window. (b) Handle of Z section 20mm x 25mm, 100mm long-01 Nos per leaf. (c) Z Section stopper 20mm x 25mm, 100mm long-01 Nos per leaf. (d) Cleat 55mm long of hollow square 15mm x 12mm- 02 Nos per leaf. (e) MS pintol hinges size 75mm x 12mm -02 Nos per leaf. (f) Guard bar (square bar) size 10mmx10mm . Note:- MS guard bars, sheet glass, and painting shall be measured and paid seperately.

All as per item No 49 above but fixing with wire mesh complete all as specified and directed (painting and wire mesh paid separately).

M&L for framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Hacking out old broken glass (any thickness) size, quality or description) from metal frame area n.exc 0.5 Sqm in each pane including punching or drilling out old glazing pins complete all as specified and directed.

M&L for 3mm thick Sheet glass, ordinary quality and glazing with silicon sealant in square n.exc 0.5 sqm in each pane complete fixed in repair complete all as specified and directed.

S&F Sheet 3.0 mm thick frosted glass, squares n.exc 0.5 sqm each pane complete all as specified and directed.

Taking down cement plaster of any description on brick or concrete surfaces etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

Demolition of brickwork built in cement or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exc. 6 mtr mean radius built in CM 1:6 complete all as specified and directed.

All as per item No 57 herein before but except bricks complete all as specified and directed.

M&L 12mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L three coats of white wash on wall surfaces including prepration of newly plastered surfaces complete all as specified and directed.

M&L 15mm thick rendering on brick work or concrete surfaces in cement mortar 1:4 finished the surfaces even and smooth complete all as specified and directed.

M&L two coats of cement base paint including preparation of newly plastered surfaces complete all as specified and directed.

M&L 5mm thick rendering on concrete surfaces of ceiling in cement mortar 1:3 , finsihed the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L three coats of white wash on ceiling undecorated surfaces including preparation of newly plastered surfaces complete all as specified and directed.

M&L applying two coats of oil emulsion distember over 3 mm wall care putty complete all as specified and directed.

BLANK

M&L framed work as in cooler stand, particle board, doors or gates of angle or other section drilled for fixing and hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete (Fe410-W Gde E-250 Quality-A) complete all as specified and directed including dismantling wrought iron or mild steel work of any description complete all as specified and directed.

M&L Pre-laminated particle board thickness 18/19mm, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including dismantling boarding any description and in any position fixed with nails complete all as specified and directed.complete all as specified and directed.

M & L Extra over rates of block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nails complete all as specified and directed.

S&F Continuous (piano) hinges 30mm width of flaps (when open) ,mild steel, bright finish or electrogalvanised complete all as specified and directed.

S&F PVC magnet catcher fixed with screws to frames complete all as specified and directed.

Dismantling wall and ceiling boards (Fibre, pulp, insulation, etc.) or insulation boards/slabs& MS / Aluminium grid, any thickness, incl. cover fillets complete all as specified and directed.

S&F GI frame work 605 X 605mm grid for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web 45mm suspended from soffit at approx 900mm centre to centre with GI cleats and steel expansion fastener with and including ceiling section (not exc. 1.2m length) of 0.5mm thickness having kurled web of 50mm flange of 26 mm each with lips of 1050 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

S&F Non asbestos fibre cement building boards 7- 8mm fixed or laid/ inserted to GI framework with screws in ceiling flat or sloping complete all as specified and directed.

Dismantling Asbestos cement corrugated or semi corrugated sheet in roof covering complete all as specified and directed.

S&F 2 mm fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with self tapping screw complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling unframed fillets, rails, posts, rafters, purlins, etc. over 40 sq. cm in section complete all as specified and directed.

S&F Roof trusses (framed) trussed , purlins , crane gantries, rails etc (beam , tee , angle, channel or flat sections) complete all as specified and directed.

M&L two coats of synthetic enamel paint to untreated surfaces of steel over 10cm width or girth not otherwise described over a coat of red oxide primer after preparation complete all as specified and directed.

Disconnecting existing water tanks, for repairs, cleaning and removing all scale and dirt etc from tanks, and from mouth of circulating pipes etc and reconnecting in same position, of capacity exc 250 ltrs and not exc. 500 ltrs each etc complete all as specified and directed.

All as per item No 82 above but capacity of tank exceeding 500 ltrs but not exceeding 1000 ltrs each complete all as specified and directed.

Demolition of reinforcement cement concrete as in Roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work (reinforcement cut as reqd to facilitate demolition) complete all as specified and directed.

M&L for Dubbing out in cement plaster (1:4) of average 10mm thick on irregular face of walls complete all as specified and directed.

S&F precast cement concrete type B1, 1:2:4 (20 mm graded crushed stone aggregate) in frame work for precast cement concrete jallies , setting in mortar complete with joints to match complete all as specified and directed.

S&F precast cement concrete type B0, 1:2:4 (12.5 mm graded crushed stone aggregate) louvres and jallies, 25 mm thick (measured in solid) including all moulding but excluding frame complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed.

Supply and fixing 5mm thick PVC sheet of any printed as in strips & channels feathered at edges for fixing to wall lining inclusive of solvent cement and fixing at site etc complete all as specified and directed.

S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes double socketed in any length with rubber ring joints fixed to walls including taking down rain water pipes (of any size and patern), including all fittings and, heads, shoes, bends, swan-necks, etc incl cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accesaries) complete all as specified and directed.complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S&F in repairs 500 ltr capacity Rotational moulded polythylene water storage tanks(cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling water tanks and removing to store complete all as specified and directed.

S&F in repairs 1000 ltr capacity Rotational moulded polythylene water storage tanks(cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling water tanks and removing to store.

S&F in repairs PVC valveless syphonic action type flushing cistern, low level 10 ltr capacity white with inlet ball valve float and handle including brackets. complete all as specified and directed.

S&F in repairs Plastic water closed seat white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium plated complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white with trap (excluding flushing cistern and flush pipe) including connection to drain and to flushing pipe etc, including plastic water closet seat black closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and directed.

S&F in repair vitreous china wash basin, white, flat back, size 550 x 400mm, fixed on existing brackets including 32mm bore CP waste coupling and incl provn of 15 mm bore fancy type pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down, high pressure, with or without lettered hot or cold with long screwed shank and fly nuts etc. complete all as specified and directed.

S&F in replacement viterous china squartting pan orrisa pattern, size 580x 440mm white, interged foot rest including connection to trap and to flush pipe, anti syphonic pipe etc. making good to floor complete all as specified and directed.

S&F in replacement Vitreous china urinal,bowl type size of 465x355x265mm (back or corner wall type) complete incl providing and fixing plugs beding urinal against wall in CM 1:2 security urinal plug with and incl 60mm long brass screws pointing around urinal back in cement fixing automatically flushing cistern with bracket, flush pipes grating and union for discharge pipe fixed complete all as specified and directed.

S&F in repairs stainless steel kitchen plate rack fixed in wall having overall size 600mm x 750mm x 250mm complete all as specified and directed.

S&F in repair stainless steel sink with draining board made of 1.00mm thick sheet for kitchen with plugs , washers waste pipe including bedding in cement mortar to dwarf wall or including fixing cast iron cantilever bracket connecting union overall size 915mmx 460mm with bowl size 410mm x330mm x160mm complete all as specified and directed.

S&F in repair stainless steel sink made of 1.00mm thick sheet for kitchen with plugs , washers waste pipe including bedding in cement mortar to dwarf wall or including fixing cast iron cantilever bracket connecting union overall size 485mmx 420mm with bowl size 410mm x330mm x160mm complete all as specified and directed.

S&F in repairs coloured PVC toilet cabinet of size 450x450x90mm with looking mirror in replacement of existing looking mirror/wooden cabinet and repairing the disturbed surfaces to match with existing complete all as specified and directed.

Demolition for cement concrete exc. 15cm thickness but above ground floor as sunken floor complete all as specified and directed.

M&L PCC (1:2:4) type B-1 using 20mm graded crushed stone agregete as in sides of rounded or chamfered on edges of sunken floor complete all as specified and directed.

M&L Priming surfaces and applying normal treatment (for moderate conditions) using bitumen primer @ .30 Kg/Sqm applied hot complete all as specified and directed.

M&L providing APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150gms/Sqm) laid on primed surfaces by forced application including applying evenly a bitumen tack coat of industrial bitumen 85/25 @ 1.2 kgs/Sqm including cleaning surfaces complete all as specified and directed.

M&L for cement concrete type E - 2, 1:5:10 (using 40 mm graded brick aggregate) as in sunken flooring complete all as specified and directed.

S&F 32 mm dia PVC pipe 450mm long bevelled cut at both ends by making hole in walls sunken portion approx above the R C C slab and ceiling finished the hole with cement plaster 1:2 to match with existing surfaces complete all as specified and directed.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F Mortice lock, vertical type, size 100 mm complete all as specified and directed.

S&F 5mm thick bakelite sheet fixed to aluminium frame/shutter as in doors or partitions complete all as specified and directed.

PK ENTERPRISES (BID ID -3390783)

JAY ANN CONSTRUCTION COMPANY (BID ID -3397190)